Military Engineer Services-MES has published Tender For Repair/Maintenance Of Dg Sets, Vehicles And Other Misc Works At Nams. Submission Date for this Tender is 09-02-2023. Tanks and Cylinders Tenders in Amritsar Punjab. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 02-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-02-2023 |
Sl. No. | Item Description |
1 | M&L for maintenance of DG Set 250 KVA DG setand carrying out "B" check and replacement/servicing of "B" check kit filters such as oil filter, by pass filter, fuel filter, CR element and CR plates complete with "O" rings and draining of Engine oil and topping up with the new engine oil complete testing all as specified and directed by Engr-in-Charge for the following capacity DG Sets : - Note : (i) Necessary tool for replacement of spares for "B" check shall be deemed to be inclusive in the rate quoted by the contractor. (ii) Spares such as replacement of u/s items incl engine oil, air filter, fuel filter, mobile filter or any parts of DG set will be measured & paid separately under respective item as supply only. (iii) Contractor should visit the site before quoting the tender to know the working condition of the station.All requisite safety measurers are to be adopted by contractor on site. (iv) Minor repair work whereever supply only items by contractor for DG sets is to be carried out by DG Set technician. (v). The contractor will be responsible for cleaning/grass cutting/ vegetation cutting upto ten meter surrounding of DG Sets. (vi) Necessary welding work required /replacement of door hings etc any other parts shall be deemed to be inclusive in the rate quoted by the contractor. (vii)Supply & fixing & testing after repair items should be executed thorugh authorized rep of manufacturer only and fixing charges to be inclusive in the rate quoted by the contractor mentioed in below respective capacity of DG sets. |
2 | Supply only following spare parts as mentioned at Srl No. 01 for 250 KVA DG set above:- |
3 | Spinion Lub Oil filter |
4 | Fuel Filter (Primary & Secondery)/Cartridge |
5 | Primary Air filter element |
6 | Safety Air filter element |
7 | Radiator assembly cleaning |
8 | All as per Srl item No. 1.00 here-in-before but for 100 KVA DG set |
9 | Supply only following spare parts as mentioned at Srl No. 1.00 for 100 KVA DG set above:- |
10 | Spinion Lub Oil filter |
11 | Fuel Filter (Primary & Secondery) |
12 | Primary Air filter element |
13 | Safety Air filter element |
14 | Oil seal (115x140x12) |
15 | Oil Seal (65x85x13) |
16 | All as per Srl item No. 1.00 here-in-before but for 50/62.5 KVA DG set |
17 | Supply only following spare parts as mentioned at Srl No. 1.00 for 50/62.5 KVA DG set above:- |
18 | Spinion Lub Oil filter |
19 | Fuel Filter (Primary & Secondery) |
20 | Primary Air filter element |
21 | Safety Air filter element |
22 | Cyl Liner assembly |
23 | Piston assembly |
24 | Cyl Head Gasket 1.22 MM Thick |
25 | Set of joints |
26 | Valve stem Seal |
27 | Oil seal (115x140x12) |
28 | Oil Seal (65x85x13) |
29 | Set of "O" Rings |
30 | V Belt XPA 1250 Cogged |
31 | CON ROD BRG HA494 STD |
32 | By pass hose : 58MM long |
33 | Selector switch |
34 | Battery Charger -6A, 12V |
35 | Hose pipe Radiator to waterpump 45x45x130L |
36 | Hose pipe to waterpump 45x45x80L |
37 | Hose: Make UP-1000 Core Radiator |
38 | Vent pipe for Radiator |
39 | Leak off Pipe Assembly |
40 | Set of copper washer - 6R1080 TA |
41 | Hose water pipe |
42 | Fuel pipe 7.5 14x14 B 700 PB |
43 | Fuel pipe 8.0 14B 1000WB |
44 | Valve Pair Inlet & Exhaust |
45 | Conversion kit from KG 934 to KG 645 |
46 | SS LH Hinge for canopy |
47 | SS RH Hinge for canopy |
48 | LH Lock with catcher 100-600 KV |
49 | RH Lock with catcher 100-600 KV |
50 | Engine Wiring Harness: 6R CPCB complete replace |
51 | Fuel tank assembly with accessory |
52 | Feed Pump W/O Bowl Filter |
53 | Banjo Belt :M14x1.5 |
54 | MCCB 250 A, 4Pole, 26 KA breaking capacity, Koel Make |
55 | Battery Cable Assembly 70sqmm |
56 | Kit Fuel Injection pump repair |
57 | Injector Calibration |
58 | Copper wiring as per existing |
59 | Radiator assembly cleaning |
60 | All as per Srl item No. 1.00 here-in-before but for 25 to 40 KVA DG set |
61 | Supply only following spare parts as mentioned at Srl No. 1.00 for 25 to 40 KVA DG set above:- |
62 | Spinion Lub Oil filter |
63 | Fuel Filter (Primary & Secondery) |
64 | Primary Air filter element |
65 | Safety Air filter element |
66 | Cylinder head reconditioning kit HA Engine |
67 | Cyl Liner assembly |
68 | Piston assembly |
69 | Cyl Head Gasket 1.22 MM Thick |
70 | Set of joints |
71 | Valve stem Seal |
72 | Oil seal (115x140x12) |
73 | Oil Seal (65x85x13) |
74 | Set of "O" Rings |
75 | V Belt XPA 1250 Cogged |
76 | CON ROD BRG HA394 STD |
77 | By pass hose : 58MM long |
78 | Selector switch |
79 | Battery Charger -6A, 12V |
80 | Hose pipe Radiator to waterpump 45x45x130L |
81 | Hose pipe to waterpump 45x45x80L |
82 | Hose: Make UP-1000 Core Radiator |
83 | Vent pipe for Radiator |
84 | Leak off Pipe Assembly |
85 | Set of copper washer - 6R1080 TA |
86 | Hose water pipe |
87 | Fuel pipe 7.5 14x14 B 700 PB |
88 | Fuel pipe 8.0 14B 1000WB |
89 | SS LH Hinge for canopy |
90 | SS RH Hinge for canopy |
91 | LH Lock with catcher 100-600 KV |
92 | RH Lock with catcher 100-600 KV |
93 | Engine Wiring Harness: 6R CPCB complete replace |
94 | Feed Pump W/O Bowl Filter |
95 | Banjo Belt :M14x1.5 |
96 | Battery Cable Assembly 70sqmm |
97 | Kit Fuel Injection pump repair |
98 | Injector Calibration |
99 | Copper wiring as per existing |
100 | Labour only for attending the breakdown/nonfunctioning of any capacity/make DG sets, AMF panels by deploying one Number Technician & helper for checking all components and rectify the fault and give report to concerned JE complete all as specified and directed by Engr-in-Charge. Note : (i) Spare parts for rectify the fault will be measured and paid separately. (ii) The contractor shall also provide DG Set technician on Sunday & holiday if required or asked by JE E/M/Engineer-in-charge. (iii) If contractor failed to provide their DG Set technician or absent to attend the complaints / minor complaint within 24 Hrs, then the recovery will be effected at Rs 2000.00 per day per complaints. |
101 | M&L for repair/Replacement of unserviceable auto main failure (AMF) panel of capacity upto 40 to 62.5 KVA capacity DG set includign all internal electrical connections,sensor, ATC switch,DG on /off facility, Busbar, wire, lugs,cable tray, panel box 18 guage thickness etc complete commissioning & testing all as specified and directed by Engr-in-Charge.Note:- Including following spare parts of AMF panel above quoted rate:-(a) MCx 130 Amp four pole power contactor-02nos,(b) Contactor side block - 02 nos,(c) Du 125 amp three pole Mccb -02 Nos, (d) Spreader link -02 set, (e) Amf controller -01 Nos, (f) 12V/24V battery charger-01 No,(g) Glass Relay-02 Nos, (h) Current Transformer-03 Nos, (j) R,Y,B indicator - 03 Nos,(k) 6 Amp single pole controler MCB-06 Nos,(l) Auxilary Contactor-02 nos. |
102 | M&L for drain out old engine oil from DG set/ Vehicle and replace with new Engine oil servo type in 20 Ltrs seal pack 20W/40 & 15W40or as per site requirement. Make : Castrol/HP/BP/Gulf/KOEL Care |
103 | M&L for Inhibitor corrosion (coolant additive concerntrate) required for top up (Make : Goetze) complete all as directed by Engr-in-charge |
104 | Supply and topping up of acid mixture suitable for lead acid batteries of 12 volts complete all as directed by Engr-in-charge |
105 | Supply and topping up of distilled water suitable for lead acid batteries of 12 volts complete all as directed by Engr-in-charge. |
106 | M&L for dismantling of exhaust pipe of the DG set by unscrewing nuts and bolts and taking down the pipe with muffler removing the burnt out asbestos rope and replaced with new asbestos rope, well wrapping with new aluminium metal cladding with glass wool including cleaning the silencer, welding if required, painting and refixing the same in its original position complete all as directed by Engr-in-charge for the following capacity DG sets :- |
107 | 25 to 40 KVA DG Sets |
108 | 50/62.5 KVA DG Sets |
109 | 100/125 KVA DG Sets |
110 | 250 KVA DG Sets |
111 | M&L for Canopy Restoration & Painting of DG set by scrapping of old paint complete and painting with two coats of synthetic enamel paint/as per existing colour/make with spray pump over a coat of red oxide primer and writing SM/MES No of fwg size complete all as specified & directed. |
112 | 25 KVA to 40 KVA |
113 | 50 KVA to 62.5 KVA |
114 | 100 KVA |
115 | M&L for replacement of lead acid battery of cap 180 AH, 12V, complete all as specified and directed. Make : Exide New Xpress or its equivalent Tata |
116 | M&L for repair/Replacement of unserviceable automatic voltage regulator (AVR) of capacity upto 25 to 62.5 KVA capacity DG set includign all internal electrical connections, testing all as specified and directed by Engr-in-Charge. |
117 | Advance maintenance free GI safe earthing electrode with pipe of not less than 50mm outer dia and two meter length. The electrode should be of galvanised (80-100 micron) along with earth lead as galvanised steel strip of size 32x6mm, 7.5 mtr. The GI electrode shall be pre-filled with cristaline conductive material (CCM). The GI electrode shall be surrounded with 25 kg Back fill compound to provide maximum contract between the electrode and back fill compound. The earthing pit cover should be factroy built size TOP 10 inch, bottom 13 inch, height 10.25 inch made of heavy duty polypropylene complete all as specified and directed. Make : ISG Global Ericon/Indelec/ABB/OBO/True Power. |
118 | Supply and fix in replacement of Galvanised iron strip 32x6mm burried in the ground/pipe/wall and dully connected to machinery with nuts bolts washers and thimbles complete all as specified and directed. |
119 | M&L for lifting the Gen Set of capacity62.5 to100KVA after disconnection complete from cables, shifting to other place whereever directed by engr-in-charge and making PCC foundation of size suitable to existing DG set with 1:2:4 including smooth finishing, shifting of DG set on new foundation with all necessary arrangement of cable connections, testing and commissioning complete all as directed by Engr-in-charge. Note :- all items, manpower including crane for lifting up and placing again on new foundation is included in quoted rates. |
120 | Taking out unserviceable cable any type/size from trenches,pole, road,duct etc including necessary joints,U/S fittingsandpipes etc complete all as directed. |
121 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armouredheavy duty electric cable 1100V grade with aluminum conductor of cross sectional area95 Sq mmx 3.5 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed . Make : Finolex/Havells/Polycab |
122 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armouredheavy duty electric cable 1100V grade with aluminum conductor of cross sectional area120 Sq mmx 3.5 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed . Make : Finolex/Havells/Polycab |
123 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armouredheavy duty electric cable 1100V grade with aluminum conductor of cross sectional area16Sq mmx 4 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed . Make : Finolex/Havells/Polycab |
124 | Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armouredheavy duty electric cable 1100V grade with aluminum conductor of cross sectional area16 Sq mmx 2 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed . Make : Finolex/Havells/Polycab |
125 | Excavation in trenches not. exc. 1.5m wide and not exc. 1.5 in deep and getting out in soft/loose soil complete all as specified and directed. |
126 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil. |
127 | Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point. |
128 | Material and labour for sand cushioning for under ground cable with locally available sand for protection of cable including spreading and consolidations, complete all as specified and directed. |
129 | Supply and laying in trenches dry well burnt locally available sub class “B” bricks over sand cushioning for protection of cable complete all as per specified and directed. |
130 | EICHER CANTER Comprehensive maint and servicing, oiling, Hub greasing, tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, replacement of coolant, brake oil, stearing oil, engineoil,cleaningandmaintofradiators,maintofbatterywithelectrolyte solution,distilledwater,wheelalignment,cleaningoffueltankcompleteallas directed. Note : Major repairs, major spare parts shall be measured and paid seperately. |
131 | Supply only following spare parts of vehicle as mentioned at Srl No. 32.00 here-in-before:- |
132 | Fuel filter (Primery & Secondry). |
133 | Oil Filter |
134 | Air Filter |
135 | Speedometre cable |
136 | Accelerator cable |
137 | Tail light assy |
138 | Fan Belt |
139 | Wiper motor |
140 | Wiper arm with rubber blade |
141 | Repair/servicing/cleaning of raditor for cooling finns core tubes bottom and upper tank leakage if any found. |
142 | Side mirror |
143 | Foot mat |
144 | Horn |
145 | Head light assy (Left & Right) |
146 | Cabin light |
147 | Indicator light assy (Left & Right) |
148 | Grease 2 kg |
149 | Repair andoverhauling ofdefective suspension systemandcheckingofparts suchasshockabsorber,front spring leaf, centre bolt, front spring leafhanger, front spring leaf, shackle pin, rear spring leaf, rear spring leaf hanger, rear shackle pin of Eicher veh and complete all as spfd and directed. Note : Major spare parts required shall be measured and paid seperately. |
150 | Supply only following spare parts for suspension system of Eicher Veh:- |
151 | Shock absorber front |
152 | Shock absorber bush |
153 | hanger front |
154 | hanger rear |
155 | Ball Joint |
156 | Load Spring various size |
157 | Tensioning the road springuptotherequired and original position and assembling the same with nuts,centerboltandclamps-04Nosandbushes complete all as specified and directed |
158 | M&L for repair and Calibration of FIP and governor by replacing pump elements, deliveryvalve,plugs,springs,gasketssleeves,washersfiltersetcandtesting complete of Eicher. |
159 | M&L for repair to self starter by replacing damaged pinions springs etc complete incl rectifications of electric wiring of the engine complete all as directed. |
160 | M& L forrepair/rewinding of unsv alternator (dynmo) of Veh Eicher Canter complete all as specified and directed. |
161 | Takingoutoldseatcoverandfixingnewleather seatcover(completeset) of Vehicle Eicher after necessary repair of original seat and cushion by stitching the worn out seat,fitting seatmaterialsofgoodqualityandfixingthesametotheirproperplaceneatly complete all as specified and as directed. |
162 | MOTOR CYCLE HERO HONDA /HF DELUXE Comprehensive maint and servicing, washing, oiling, greasing, tuning, overhauling fixture accessories replacement of first moving parts changing oil/oil filters,replacementofbulbs,fuses,repairingofwiring,maintofbatterywith electrolyte solution, distilled water complete all as directed. Note : Major repairs, major spare parts shall be measured and paid seperately. |
163 | Supply only following spare parts of vehicle as mentioned at Srl No. 40.00 here-in-before :- |
164 | Speedometre cable |
165 | Spark plug |
166 | Indicator Assy front side |
167 | Indicator Assy rear side |
168 | Horn Assy |
169 | Oil Filter |
170 | Chain Spocket |
171 | Clutch/Race cable |
172 | Chain with revet |
173 | Side mirror |
174 | Front light assy complete |
175 | Rear light assy complete |
176 | Repair and overhauling of defective shocker system of motor cycle and carry out the repair including replacement of the defective spare parts and assembling the same and testing complete all as specified and as directed. Note : Major spare parts required shall be measured and paid seperately. |
177 | Supply only following spare parts for shocker system of motor cycle :- |
178 | Rear shocker |
179 | Oil pump in built front shocker |
180 | hydraulic oil |
181 | Shock Absorber |
182 | Repair and overhauling of defective brake system of motor cycle, replacement of defectivesparepartlike brake shoe etc andassemblingthesamewithtestingcomplete allas specified and as directed. |
183 | Takingoutoldseatcoverandfixingnewseatcover(completeset of motor cycle) after necessary repair of original seat and cushion by stitching the worn out seat,fitting seatmaterialsofgoodqualityandfixingthesametotheirproperplaceneatly complete all as specified and as directed. |
184 | Dismantlingandtakingdownthegearboxof MC repairandoverhaulingincluding replacementof worn spare partsand testing completed allas specifiedand as directed. |
185 | M & L for repair /rewinding of unsv altornator (dynmo) MC self starting type system defected any type complete repair deemed to be quoted rate complete allas specified and directed. |
186 | Supply & fixing of following car accessories for vehicle Maruti Suzuki Dezire (Staff Car) are as under :- |
187 | Door Wiser set of 4pc |
188 | LED Fog Light |
189 | Perfume 250 ml. |
190 | Towel large size. |
191 | Number plate with BA NO |
192 | Matting complete set. |
193 | Computerized alignment and balancing of wheels |
194 | Seat Cover complete set |
195 | TATA XENON /TATA Mobile 207 DI Comprehensive maint and servicing, oiling, Hub greasing, tuning, overhauling fixture accessories replacement of first moving parts changing oil/oil filters,replacementofbulbs,fuses,repairingofwiring,maintofbatterywith electrolytesolution, distilledwaterandreplacingallthemonogramwithnew monogramandletterwritingwithrediumretroletterwritingcompleteallas directed. Note : Major repairs, major spare parts shall be measured and paid seperately. |
196 | Supply only following spare parts of vehicle as mentioned at Srl No. 49.00 here-in-before :- |
197 | Oil Filter |
198 | Fuel filter (Primery & Secondry). |
199 | Staring cover |
200 | Mud flap for veh |
201 | Complete set of mat including floor mat of the vehicle |
202 | Side mirror |
203 | Computerized alignment and balancing of wheel |
204 | LED Fog Light complete assy (L+R) |
205 | Head light assy (Left & Right) |
206 | Indicator light assy (L+R) |
207 | Fan Belt |
208 | Raditor servicing/cleaning incl. repair if any water leakge found. |
209 | Fuel Tank cleaning |
210 | Wiper arms with blade |
211 | Wiper moter with pipe & connected items |
212 | Air cleaner filter element |
213 | Door lock assembly complete set |
214 | Speedometre cable |
215 | Accelerator cable |
216 | Horn Assy |
217 | Grease 2 kg |
218 | Repair and overhauling of defective brake system and checking of parts such as front disc brake, rear wheel cylinder, master cylinder, rear brake shoe, front disc brake pad, frontdiscbreakcaliper assembly completebrake pipe,rear wheel brake shoe spring & locking assembly and testing complete of TATA XENON /TATA Mobile 207 DI all as specified and as directed. Note : Major spare parts required shall be measured and paid seperately. |
219 | Supply only following spare parts for braking system mentioned in above item no 51.00 here-in-before :- |
220 | Front brake disc |
221 | Rear wheel cylinder kit |
222 | Rear brake shoe |
223 | Pressure plate |
224 | Rear wheel brake shoe spring & locking assembly |
225 | Clutch plate |
226 | Repair and overhauling of defective shafting system and checking of parts such as propeller shaft, centre bearing, centre bearing clamp and rubber pad, universal cross, yok, teeth and testing of Tata Mobile/Xenon/Eicher complete all as directed. Note :- Major spare parts required shall be measured and paid seperately. |
227 | Supply only following spare parts for shafting system mentioned in above item no 53.00 here-in-before:- |
228 | Centre bearing |
229 | Tie rodwith end set |
230 | Centre bearing clamp |
231 | U J Cross bearing |
232 | Repair and cleaning of defectivesilencer assembly including necessary cutting, welding, cleaning andassembling complete of Tata Mobile/Eicherall as specified and directed. Note : Major spare parts required shall be measured and paid seperately as supply only. |
233 | Supply only following spare parts for Silencer Assembly of Tata Mobile/Eicher :- |
234 | Muffler |
235 | Manifold |
236 | Silencer pipe Assy |
237 | Taking out old seat cover and fixing new Leather seat cover (complete set front and back) after necessary repair of original seat and cushion by stitching the worn out seat, fittingseatmaterialsofgoodqualityandfixingthesametotheirproperplace neatly complete of Tata Mobile/Xenon all as specified and as directed. |
238 | Dismantlingandtakingdownthegearboxofrepairandoverhaulingincluding replacement ofworn spare parts i.e. gear liver kit, Gear pinion 1st, 2nd, 3rd, 4th and 5th and other minor spares andtesting of Tata Mobile/Xenon completed all as directed. |
239 | Taking down old unserviceable silencer replace with newsilencer of Tata Mobile/Xenon including necessary accessories as per OEM andassembling complete ofall as specified and directed. |
240 | Dismantling and taking out defective water pumpfrom Tata Mobile/Xenon and supply & Fixing new water pump with complete accessories as per existing OEM complete the re-assembling the same after testing and commissioning comlete all as specified & directed. |
241 | Dismantling and taking out defective water pumpfrom Eicher and supply & Fixing new water pump with complete accessories as per existing OEM complete the re-assembling the same after testing and commissioning comlete all as specified & directed. |
242 | Taking out old front wind shield glass and fixing new front wind shield glass with wind shield glass paste,moulding packing etc complete necessary work as requiredofgoodqualitycomplete of Tata Xenon all as specified and as directed. |
243 | Taking out old front bumper and fixing new bumper(complete set front side) after necessary repair work as requiredofgoodqualityandfixingthesametotheirproperplace neatly complete of Tata Xenon all as specified and as directed. |
244 | M&L for repair and overhauling of complete Engine andcalibration of FIP and governor by replacing pump elements, deliveryvalve,plugs,springs,gasketssleeves,washersfiltersetc complete all accessories as required of Tata Mobile/ Xenon andtesting complete. Note:- The quoted rate deemed to be inclusive of manpower, Engine accessoriesas as required ,charges for transporting engine to workshop and back after repairs & testing complete. |
245 | Supply, fixing, connecting & testing battery 12 volts,70 to 90 AH for Tata Xenon/Tata Mobile/Eicher Vehicle with lead acid terminal, indications of charging position and terminal for connection etc initial charging andtakingouttheold battery complete all as specified and directed. Make: Exide/ Amaron/ livguard. |
246 | Supply,fixingandconnecting & testingbattery12volts,2.5AHforHero Honda motorcycle Vehicle with leadacid terminal, indicationsof charging position andterminal for connectionetcinitialchargingandtakingouttheoldbattery complete all as specified and directed. Make:- Exide/ Amaron/ livguard. |
247 | M&Lfor repair to self starter and battery charger/ Dynamo by replacing damaged pinionsspringsetc.completeinclrectificationsofelectricwiringoftheengine complete Tata Mobile/Xenon. |
248 | M&L for repair/ rewinding of unsv alternator (dynmo) of Veh Tata Mobile/Xenon complete all as specified and directed. |
249 | Supply andfixingin replacementoftubeless coverouter (tyre)ofsizeas per OEM suitableforTataXenon andtaking down old cover outer complete all as specified and directed. Make: MRF/ Ceat/ Bridgstone. |
250 | M & L for scraping out old painted surface of vehicles TATA Mobile and prepairing the base with one coat of 2k paint and after then apply one finishing coat with 2K paint by using spray machine including scraping, minor denting etc. complete all as specified and directed. |
251 | M & L for scraping out old painted surface of vehicles Eicher and prepairing the base with one coat of 2k paint and after then apply one finishing coat with 2K paint by using spray machine including scraping, denting etc. complete all as specified and directed. |
252 | M & L for repairing the dent at diffrent location/ patches on surface of vehicles TATA Mobile and prepairing the base with one coat of 2k paint and after then apply one finishing coat with 2K paint by using spray machine on repaired surface to match the existing colour etc complete all as specified and directed. |
253 | Supply only Brake oil of suitable grade as recommended by OEM or authorised ageny for vehicles complete all as specified and directed. Make:- Castrol/ Shell/ Servo/ Gulf |
254 | SupplyonlyGearoilofsuitablegradeasrecommendedbyOEMorauthorised ageny for vehicles complete all as speciied and directed. Make: Castrol/ Shell/ Servo/ Gulf |
255 | M & L for replacement ofcomplete wiringwith new wiring including all connected accessories suitable for Tata Xenon/Eicher complete all as directed. |
256 | M & L for charging of AC gas as per OEM complete with testing & servicing of Air conditioning of Vehicle including all connected accessories suitable for Tata Xenon complete all as directed. |
257 | M & L for replacement ofcomplete wiringwith new wiring including all connected accessories suitable for Motor Cycle Hero Honda complete all as directed. |
258 | M & L forwashing the completelight vehicle (PC) vehicle with foamremoving all dust particles from outside and inside using vacuum cleaner, including polishing dashboardorotherinternalparts,greasing,tightningtheloosenuts,boltsetc. complete all as directed. |
259 | M & L for washing the complete heavy vehicle (LCV)vehicle with foam removing all dust particles from outside and inside using vacuum cleaner, including polishing dash board or other internalparts,greasing, tightning theloose nuts, bolts etc. complete all as directed. |
260 | S & F steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls ,orin floorsbut laid in trench of folliwng bore of pipe in old/new situation (Make : TATA/JINDAL/Prakash Surya/Ravindra |
261 | 25mm dia |
262 | 32mm dia |
263 | Supplying , fixing & Hoisting and fixingin position and connecting,2000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. Make sintex |
264 | S&F 40 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) |
265 | S&F, Gun metal globe or gate valve,with iron wheel head, screwed both ends for iron pipe for 32mm bore of pipe complete all as specified and directed. |
266 | S&F, Gun metal globe or gate valve,with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed. |
267 | S&F in repair/replacement of tankconnector 25/32mm bore complete all as specified and directed. |
268 | M&L for Brick work with sub class "B" bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete and including demolition complete all as specified and directed. |
269 | M&L for Brick work with sub class "B" bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete and including demolition complete all as specified and directed. |
270 | M&L for rendering cement plaster 15mm thick in cement mortar 1:4 on fair faces external of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
271 | M&L in repair for TMT bars 10mm dia and over cut to length, bent to shape required, including, cracking, bending spirally for hooping for columns, booking ends and binding with and including mild steel wire (annnealed) not less then 0.9 mm dia complete all as specified & directed by Engr-in-charge. |
272 | M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate in foundation filling and mass concreteincluding demolition complete all as specified and directed. |
273 | M&L for reinforced cement concrete, (1:1½:3) Type A1using 20mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs and mass cocrete incl formwork complete all as specified and directed. |
274 | M&L for 50mm thick cement concrete (1:2:4) type B1, using 20mm graded stone aggregate laid over roof as in platforms for water tanks, finished even and smooth without using extra cementincluding demolition complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail