Tender For Hauling Up And Launching Roofing Fabrication Machinery Carpender Painting And Electrical Work Fiber Boat Periyar For The Use Of Periyar Tiger Reserve
Tender Value
6.84 Lakhs
Estimated cost
Bid Submission
20 Jan 2023
0 days left
EMD
17100
Bank guarantee accepted
Document Fee
1652
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thekkady → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Hauling Up And Launching Roofing Fabrication Machinery Carpender Painting And Electrical Work Fiber Boat Periyar For The Use Of Periyar Tiger Reserve
BOQ
| Sl. No. | Item Description |
| 1 | 12.47.2Providing & fixing UV stabilised fibre glass reinforced plastic sheet rooting up to any pitch, including fixing with polymer coated \"J* or \"L\" hooks, bolts & nuts 8 mm dia G.l plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2 mm thick flat |
| 2 | 12.41.2Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with sea! ring conforming to IS : 5382. leaving 10 mm gap for thermal exoansion, (I) Single socketed pipes.110 mm diameter |
| 3 | 25.7Designing, fabricating,, testing, installing and fixing in position Curtain Wall withAluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight, including checking of all the structural and functional design.b) Providing, fabricating and supplying and] fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades: made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grademineral[ core sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin; coating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanisedwith serrations and serrated washers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mock ups at site, cost of all samples of the individual components for testing inan approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wallwith aluminium composite panel cladding till the handing over of the building i foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having al! the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per theapprovea shop drawings and as directed by the Engineer-in-Charge.However, for the purpose of payment, oniy ine actual urea on the external face ofthe curtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places. |
| 4 | od372/2022_2023Cutting and removing the 3 inch MS pipe length of 50cm from the bottom provided in the main deck to support the upper deck of the vessel, supply cut, fit and weld new pipe of existing size and dimension as oer the direction of the department officials. |
| 5 | od373/2022_2023Supplying, welding, and fixing with new Steel chequered plates conforming to IS 3502 of various thicknesses at various portions on the vessel by removing the old damaged portion, cutting into existing size and shape, The rate including the cost of materials, welding charges, tools, plants, scaffolding, other ncidental expenses, etc. complete as per the direction of the department officers. |
| 6 | 21.3.1Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness |
| 7 | od378/2022_2023Renew al! the damaged glass rubber beading at various portions in the vessel with existing size all as directed by the departmental officers |
| 8 | 1 od365/2022_2023Remove the old damaged 1” wooden beading from its position, supply and install new T\" wide wooden teakwood beading on the ceiling and side panel at various portion of the vessel |
| 9 | od369/2022 2023Making and fixing Anjali wooden beams and planks on deck or any other portion by using brass screws and copper nails from any portion of the vessel The rate including the cost of wood and sawing charges of wood, all labour charges, conveyance charges, cost of screws and nails etc. |
| 10 | od374/2022_2023Supply and Replace damaged marine plywoods of deck with new 16 mm marine plywood conforming to IS:710 . The rate includes all material and labour charges. |
| 11 | od366/2022_2023Removing the propeller with shaft and bushes from the vessel and dismantling the propeller from the propeller shaft etc. and renew the bushes and gland packing, bend checking and straightening the shaft, balancing and pitch correcting the propeller etc. all as per the direction of departmental officers. |
| 12 | od367/2022_2023Clean and Fiber the damaged portion of the boat by good quality fiber materials in two layers, finish and colour as per the direction of the departmental officers |
| 13 | od371/2022_2023Supply and install new RPM meter cable of existing size and dimension by replacing the old one as peq the direction of department officials |
| 14 | Od375/2022 2023Remove the old damaged 1.5 inch diameter Air pipe bend from its position by cutting, supply new bend of existing size and dimension and install the same by welding all as per the direction ano1 satisfaction of department officials |
| 15 | od376/2022_2023Supply and install new hand operated bilge pump of existing size and dimension with all fittings , hoses, etc by replacing the existing damaged pump all as per the direction of department officials |
| 16 | od377/2022_2023 . /Supply , fabricate and install 3/4 inch Stainless steel hand rails in the vessel as per the direction of department officials. |
| 17 | od379/2022_2023Supply and Replace damaged side panels, cieling made of Hylum sheet with new hylum sheet of existing thickness as per the direction of satisfaction of department officials. |
| 18 | od380/2022_2023Providing Transparent Waterproof Curtain, PVC Curtains suitable for out door usage at various portion of the vessel, 20 mm Gl pipe to be hanged at the bottom of the curtain such that the curtain remain firm during all weather as per the direction of the department officials, the rate includes procurement, cutting, stitching and fitting charges. |
| 19 | od381/2022_2023Supply and install wire netted chair at the wheel house of the vessel as per the direction of department officials |
| 20 | od382/2022_2023Supply and replace the existing wiper blade of the vessel with new one as per the direction andsatisfaction of the department officials |
| 21 | od383/2022_2023Retrofit the steering system wirerope and pulley by supplying and installing chain and pulley system? as per the direction of department officials |
| 22 | 13.48.3Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per. manufacturers soecificatmn«-p^nf-ng $toe! work -with De’uxe Mu!*\" Sartor0 D^!nt to mva an e? vd shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coai or primer appnecH^ Ub* sqm of approved brand ancTmanufacture |
| 23 | od390/2022_2023Removing the thickly formed oyster coating and other vegetable growth from the underwater portion of the vessel including cleaning the surface etc. complete as per the direction and satisfication of department officers . |
| 24 | od391/2022_2023Supplying and painting two coats to the underwater portion with antifouling paint (quality of entire quantity of antifouling paint supply should be get inspected and approved by engineer, who is in-charge of work/ department authority before starting / continuation of the painting work) over the Paint already done etc. complete as per the direction and satisfaction of departmental officers. |
| 25 | oc392/2022_2023Supplying and painting with approved (quality of entire quantity of primer supply should be get inspected and approved by engineer, who is in-charge of work / department authority before starting / continuation; of the painting work) best quality (marine) yellow high rich zincromate metal primer two coats over all chipped surface after cleaning the surface etc, complete as per the direction of departmental officers . |
| 26 | od368/2022_2023All the Electrical Systems and installations like lights, Horn, Navigational Lights, Search lights, Electrical switches, Fans, electric cables etc are to be inspected, repair works to be carried out and all the electrical installations to be made operational all as per the direction and satisfaction of the department officials. Damaged electrical installations to be replaced by supplying (The contractor should procure the defected items from the authorized dealer and submit the original dealer bill along with the contractor bill for its reimbursement. 15% of the cost of spares will be paid to the contractor as overhead charges for arranging these items. These procured as well as the replaced items should get inspected by the Engineer who is the in-charge of the work and the un-serviceable / old items should be returned to dept for realization of payment) |
| 27 | 5 Provision for procurement of spares |
| 28 | od364/2022_2023Cutting and removing the old damaged, weakened, severely damaged various thickness ms plate/ ms flat/ ms angels/ ms rods/ beams/ griders etc. marked by dept officers in various places of the vessel without damaging any other portion/ structures/member on the vessel as per the direction of department officers. |
| 29 | od370/2022_2023Supplying and welding with new various thickness M S Plates / M S Angle/ M S Flat /M S Road /Beam/ Gazette of existing size and shape to the various portions on the deck of the vessel\"s already removed damaged portion of the after heating and bending into shape, V Cut on the matting edge of the plate and| welding three layer on both sides together. The rate including the cost of materials, welding charges, tools , plants, scaffolding,other incidental expenses etc. complete as per the direction of the department officers. |
| 30 | 10 Unforeseen works if any |
| 31 | 1 od389/2022_2023Hauling up of the Vessel GRT up to 30 ton at thekkady reservoir at a place as directed by the departmentofficers. Keeping the vessel at a height of 75 CM above the ground level for inspection and launching thesame after under water repairs, as directed by Department Officers. |
| 32 | Lumpsum for round off |
AI Tender Summary
Tender Timeline
Jan 12, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 24, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender