Tamil Nadu Generation And Distribution Corporation Limited-TANGEDCO has published Tender For Works Contract For Erection Of Poles And Dts And Other Allied Extension Works In Rural/Perundurai Section Of Perundurai Division. Submission Date for this Tender is 24-01-2023. Distribution Transformer Tenders in erode Tamil Nadu. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Excavationofpolepit size of 2"x2"x6" upto 27" Pole by using JCB or manual |
2 | Excavation of Stay pit 4.5" to 5" by using JCB or manual |
3 | Excavationofpolepit size above 8 Mts PSC/RCC/RSJ Pole by using JCB or manual |
4 | Excavation of pit in Hard rock requires without blasting(where houses are located) |
5 | Erection of RCC poles/PSC Poles /metal poles upto 27"(8.0m) pole by using JCB or manual |
6 | Erection of RCC poles/PSC Poles/metal poles above 8 mtrspole by using JCB or manual |
7 | Erection of RSJ ,Rail and fabricated poles above 9.0m pole by using JCB or manual |
8 | Erectionof stay set complete |
9 | Fixingof HT "V" cross arms (all types)/Channel cross arms/Guarding Cross arms |
10 | Fixingof LT 3 phase cross arms |
11 | Fixing of LT Single phase ph X arm |
12 | Fixing of HT/LT TI fittings |
13 | Fixing of HT Pin insulator 11 KV/22 KV |
14 | Fixing of HT Pin insulator33 KV |
15 | Fixing of HT 11KV strain Disc |
16 | Fixing of HT 22KV strain Disc |
17 | Fixing of LT pin insulators |
18 | Fixing of LT shackle with MP |
19 | Fixing of Aluminium Knob |
20 | Earthing of pole with pin including burying ,looping and binding |
21 | Paving of Conductor, stringing, binding, jumpering etc., complete for lines with ACSR 7/4.09 mm |
22 | Paving of Conductor, stringing, binding, jumpering etc., complete for lines with ACSR 7/3.35 mm or AAAC 7/3.15 mm conductor |
23 | Paving of Conductor, stringing, binding, jumpering etc., complete for lines with ACSR 7/2.59 mm or AAAC 7/2.50mm conductor |
24 | ERECTIONofDouble Pole TRANSFORMERSTRUCTURE COMPLETEinclusive of following works -Excavation of pole pits sizing 2" X 2" X 6"(2*475), erection of poles(2*550), Excavation of Stay pits (4*390) and Erection of stay set (4*210), erection of structure materials (Top Channel-Rs.250, Bed Channel-Rs.250,Cross with stud for bed Channel-Rs.120, Belting Angle-Rs.250) erection of AB switch (Rs.1000), HG Fuse (Rs.600) Structure Earthing complete (Rs.2100), Fixing of Open Type fuse units and feeder arrangements(Rs.900), HT/LT LAS fixing(Rs.350 and Rs.250) , Provision of bus-bar arrangement(Rs.500), Jumpering(Rs.400) Fixing of support inculator angle and erection of of 3 Nos pin insulators ( Rs.200) ( all T&P suchas crowbars, siling, DShackle etc., that must be brought by the contractor)(Labour for Structure Concreting, Stay Concreting,Painting, Fixing of name board / Danger Board, Erection of transformer, Transporting of Transformer , Fixing of DT meter ,Drilling of holes, Cutting,welding,alteration of clamps if anyand Provision of Earth pit collars are separately given). |
25 | Erection of Double Polestructure (D.P)- inclusive of following works -Excavation of pole pits sizing 2" X 2" X 6"(2*475), erection of poles(2*550), Excavation of Stay pits (4*390) and Erection of stay set (4*210), erection of structure materials (Top Channel-Rs.250) erection of AB switch (Rs.1000),Structure Earthing complete (Rs.1500), HT LAS fixing(Rs.350 ) ,Jumpering (Rs.250) (all T&P suchas crowbars, siling, DShackle etc., that must be brought by the contractor)(Labour for Structure Concreting, Stay Concreting,Painting, Fixing of name board/Danger Board,(Drilling of holes, Cutting,welding,alteration of clamps if anyand Provision of Earth pit collars are separately given) |
26 | Erection of Single pole Transformer Structure-inclusive of following works -Excavation of pole pit sizing 2" X 2" X 6"(1*475), erection of poles 1*550), Excavation of Stay pits (1*390) and Erection of stay set (1*210), erection of structure materials (Tapping Channel-Rs.150, Transformer centre set arrangements-Rs.350) erection of AB switch (Rs.900), HG Fuse (Rs.400) Structure Earthing complete (Rs.2000), Fixing of Open Type fuse units and feeder arrangements(Rs.450), HT/LT LAS fixing(Rs.350 and Rs.250) ,Jumpering(Rs.300)(all T&P suchas crowbars, siling, DShackle etc., that must be brought by the contractor)(Labour for Structure Concreting, Stay Concreting,Painting, Fixing of name board/ Danger Board.Erection of transformer,transporting of transformer, LT cable arrangements, fixing of DT meter. Drilling of holes, Cutting,welding,alteration of clamps if anyand Provision of Earth pit collars are separately given) |
27 | Guarding arrangements with Flat guarding including fixing of 2Nos. Cross arms HT/LT |
28 | Transportofpoles/Materials/ conductors /DT/Metering Set andothermaterials( excludingloading andunloadingcharges.) below 8 Kms |
29 | Transports of poles /Materials /Conductors and other materials(excluding loading and unloading charges) for above 8 Kms for addl. Kms( Irrespective of weight in Tonage/KM |
30 | Loadingofmetal poles ( all sizes) |
31 | Unloadingofmetal poles ( all sizes) |
32 | Loadingofpoles up to 8 MRCC/PSC poles |
33 | Loadingofpoles above 8 mRCC/PSC poles |
34 | UnLoadingofpoles up to 8 M RCC/PSC poles |
35 | UnLoadingofpoles above 8 M RCC/PSC poles |
36 | Transporting of poles from road side to pole pit Location including loadingand unloading of polesby using JCB or Manual Up to 100 m |
37 | Transporting of poles from road side to pole pit including loadingand unloading of polesby using JCB or Manual above 100 m |
38 | Erection of street light including fixture fitting |
39 | Erection of street light service |
40 | Releasingofsingle phaseservicewire and re-fixing. |
41 | Releasingof3 phaseservice wire(upto 50 HP) and re-fixing. |
42 | Releasingof3 phaseservice wire (above 50 HP) andre-fixing. |
43 | Labourchargesforalterationof Back clamps tosuitfortheworks |
44 | Labourchargesforalterationof Stay clamps tosuitfortheworks |
45 | Cutting of coconut leaves /per tree |
46 | Cleaning of branches of treeper tree |
47 | Drilling of hole in channel only 3/4" & 1" per hole |
48 | Cutting of channel |
49 | Cutting of Angle |
50 | Cutting of pipe |
51 | Dismandling of pole above 8.0 mtr |
52 | Dismandling ofpoleup to 8.0 mtr |
53 | Dismandling of "V" X arm(all types),channel X arm,guarding X arm |
54 | Dismandling of LT 3 phase X arm |
55 | Dismandling of LT single phase X arm |
56 | Dismandling of HT/LT TI fitting |
57 | Dismandling of 11KV strain disc |
58 | Dismandling of 11 KV/22KV pin insulator |
59 | Dismandling of33 KV pin insulator |
60 | Dismandling of LT shackle |
61 | Dismandling of LT pin insulator |
62 | Dismandling of Aluminium knob |
63 | Dismandling of stay set |
64 | Dismandling of ACSR 7/3.35mm orAAAC7/3.15 conductor |
65 | Dismandling of ACSR 7/2.59mm or 7/2.11mm conductor |
66 | Dismandling of street light service |
67 | Feeder arrangementswith Open Type fuse Units per 1 Feeder |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail