Military Engineer Services-MES has published Tender For Provision Of Solid Waste Mgt Sys In Tibri Mil Stn Under Ge Gurdaspur(Tender Id : 2022_Mes_500883_3). Submission Date for this Tender is 11-02-2023. Coats and Jackets Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Jan-2023 | CORRIGENDUM NO 02 DATED 23 JAN 2023 | BOQ | 04-02-2023 |
| 2 | 23-Jan-2023 | CORRIGENDUM NO 01 DATED 23 JAN 2023 | Other | 04-02-2023 |
| 3 | 04-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-02-2023 |
| Sl. No. | Item Description |
| 1 | Note: Please refer Schedule "A" Notes given on serial page No. 23 to 28 of tender documents. |
| 2 | LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS |
| 3 | Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule "A" Part-I brought forward from serial page No. 29. |
| 4 | Lump sum price worked out by the contractor forSITE CLERANCE AND EARTHWORKS as listed in Schedule "A" Part-II brought forward from serial page No. 30. |
| 5 | Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS Schedule "A" Part-III brought forward from serial page No. 31. |
| 6 | Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS Schedule "A" Part-IV brought forward from serial page No. 34. |
| 7 | Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule "A" Part-V brought forward from serial page No. 36. |
| 8 | Lump sum price worked out by the contractor for ROAD/ PATH/ CULVERT WORKS as listed in Schedule "A" Part-VI brought forward from serial page No. 38. |
| 9 | Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule "A" Part-VII brought forward from serial page No. 39. |
| 10 | Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATIONWORKS as listed in Schedule "A" Part-VIII brought forward from serial page No. 42. |
| 11 | Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLYWORKS as listed in Schedule "A" Part-IX brought forward from serial page No. 43. |
| 12 | Lump sum price worked out by the contractor for WASTE WATER COLLECTIONTANK AND LECHATECOLLECTION PITS WORKS listed in Schedule "A" Part-X brought forward from serial page No. 44. |
| 13 | Lump sum price worked out by the contractor for COMPOSIT PITS WITH COVER WORKS listed in Schedule "A" Part-XI brought forward from serial page No. 45. |
| 14 | MISCELLANEOUS ITEMS OF WORKS -SCH"A" PART-XII |
| 15 | INTERNAL ELECTRIFICATION WORKS |
| 16 | Supply and fixing GI pipe bracket made out of GI pipe light grade 32mm dia and bend to shape 1.5mtr long, MS clamps made out of MS flat iron of size 32mm thick with nuts & bolts, washers complete all as specified and directed. |
| 17 | Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burrieddirectly in groundverticallyto a depth not less than 2.5 metrebelowgroundlevelwith topedgeof theearth plate at a depth not less than 1.5 mtr belowgroundlevelearth platesurrounded from all sides by 15cmthickpacked layer ofcharcoal dust and common saltfillinginalternate layers andelectrodeconnectionby usingearth lead of size 4 mm dia (8 SWG)by meansof bolts, nuts, check nutsand washersmade of galvanised ironand thimbles and other endof theearth wire connectedto mainswitch boardprotected by galvanised iron medium grade pipe 15mm borein wall/floor/andGI Pipe 20mm borelight grade forwatering with funnel and wiremesh PCC chamber in cementconcrete 1:3:6 typeC-2 and RCC pitcover includingnecessaryexcavation andearth work in anytype ofsoil, returningslurry approved soil and disposed of surplussoilto adistancenotexceeding 50 Mtraway all as shown inelectrical plateNo 3ofSSR 2009 ( Part-I). |
| 18 | EXTERNAL ELECTRIFICATION WORKS |
| 19 | Supply, Install, testing & commissioning factory made outdoor type dust and vermin proof LT panel board cubical double door hinged type compartment of suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3.15 mm thick machine pressed and angle iron frame 40 mm x 40mm x6mm grouted in PCC 1:2:4 type B1 (20mm graded stone aggregated) powder coated inside and outside complete including 4 pole aluminium busbar of capacity 200 Amps mounted on porcelain insulators and enclosed in chamber and connection from incoming and outgoing electric cable with suitable size thimbles/lugs with openable shutters on both side and comprising of the following :- (a) MCCB 125 Amps cap with adjustable thermal release 4 pole of 25 KA rapturing capacity- 01 No. (b) MCCB FP, 63 Amps 16 KAoutgoing- 02 Nos (c) MCB TPN 40 Amp 10 KA outgoing- 05 Nos (d) Digital Volt meter 0-500 volt with selector switch, Digital Amp meter of capacity 0-300 Amp alongwith selector switchs 3 x LED type indicator (RYB) 3 x 300/5 tape wound CT"s 3 x SP MCBs of 6 Amp for protection of indicator -01 No (e) Timer switch 3 phase 32 amp – 01 No |
| 20 | Supply, Install, testing & commissioning factory made outdoor type dust and vermin proof LT panel board cubical double door hinged type compartmentlised of suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3.15 mm thick machine pressed and angle iron frame 40 mm x 40mm x6mm grouted in PCC 1:2:4 type B1 (20mm graded stone aggregated) powder coated inside and outside complete including 4 pole aluminium busbar of capacity 200 Amps mounted on porcelain insulators and enclosed in chamber and connection from incoming and outgoing electric cable with suitable size thimbles/lugs with openable shutters on both side and comprising of the following :- (a) MCCB 125 Amps cap with adjustable thermal release 4 pole of 25 KA rapturing capacity- 02 No. (b) MCCB FP, 40 Amps 16 KAoutgoing- 01 Nos (c) Digital Volt meter 0-500 volt with selector switch, Digital Amp meter of capacity 0-300 Amp alongwith selector switchs 3 x LED type indicator (RYB) 3 x 300/5 tape wound CT"s 3 x SP MCBs of 6 Amp for protection of indicator -01 No |
| 21 | Supply and fixingenergy efficient LED street light fiiting 72W with pressure die cast aluminium housing with toughened glass having IP-66 degree protection, individual LEDs must have secondary lenses for better throw across and along the road, with sysytem efficiency = 100 lumen/watt, colour rendering index(CRI) of = 70, corelated colour temperature CCT of 4000K appx (Warm White). The luminaire should have surge protection upto 5KV and have an addtional surge protection of 10KV for driver, PF = 0.9 and TD = 10%, operating temewoperature range from 140 to 270V with the potted driver. the potted driver used shall be of constant voltage type and ISI marked all as per BIS-15885 Part-2, section 13 with efficiency = 85%. The make of driver shall be same as the make of Luminaire fixture, complete all as specified and directed. |
| 22 | Supply & fix junction box hot press moulded SMC type, environment friendlyrecyclable UV resistant, silicon free anti acid and anti corrosive IP-66/67 in accordance with IE rule internal embedded gasket and 01 (one) MCB SP 6A, 10KA breaking capacity, 02 Nos aluminium bus bar of size 25x 3 mm fixed to the street light pole or wall including necessary clamps, nut bolts complete all as specified and directed. |
| 23 | S & F PVC insul;ated unsheathed three core and PVC round sheathed multicore flexible copper cable for working voltage upto and including 1100 V of size 0.75 sqmm 3 core complete all as specified and directed |
| 24 | M&L for strret light brackets made ofGI tubinglight grade, 40mm dia ,1.2 mtr long ,bent to shape suitable for fixing of street light fixed along the pole with necessary clamps, nut bolts etc all as directed. |
| 25 | Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burrieddirectly in groundverticallyto a depth not less than 2.5 metrebelowgroundlevelwith topedgeof theearth plate at a depth not less than 1.5 mtr belowgroundlevelearth platesurrounded from all sides by 15cmthickpacked layer ofcharcoal dust and common saltfillinginalternate layers andelectrodeconnectionby usingearth lead of size 4 mm dia (8 SWG)by meansof bolts, nuts, check nutsand washersmade of galvanised ironand thimbles and other endof theearth wire connectedto mainswitch boardprotected by galvanised iron medium grade pipe 15mm borein wall/floor/andGI Pipe 20mm borelight grade forwatering with funnel and wiremesh PCC chamber in cementconcrete 1:3:6 typeC-2 and RCC pitcover includingnecessaryexcavation andearth work in anytype ofsoil, returningslurry approved soil and disposed of surplussoilto adistancenotexceeding 50 Mtraway all as shown inelectrical plateNo 3ofSSR 2009 ( Part-I). |
| 26 | Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burrieddirectly in groundverticallyto a depth not less than 2.5 metrebelowgroundlevelwith topedgeof theearth plate at a depth not less than 1.5 mtr belowgroundlevelearth platesurrounded from all sides by 15cmthickpacked layer ofcharcoal dust and common saltfillinginalternate layers andelectrodeconnectionby usingearth strip 32 x 6 mm by meansof bolts, nuts, check nutsand washersmade of galvanised ironand thimbles and other endof theearth wire connectedto mainswitch boardprotected by galvanised iron medium grade pipe 40mm borein wall/floor/andGI Pipe 20 mm borelight grade forwatering with funnel and wiremesh PCC chamber in cementconcrete 1:3:6 typeC-2 and RCC pitcover includingnecessaryexcavation andearth work in anytype ofsoil, returningslurry approved soil and disposed of surplussoilto adistancenotexceeding 50 Mtraway all as shown inelectrical plateNo 3ofSSR 2009 ( Part-I). |
| 27 | DG SET WORKS |
| 28 | Supply, install, commissioning and testing complete Diesel Engine driven generating set of capacity 62.5 KVA or next higher capacity available/manufactured , water cooled, 415 volts (AC 3 Phase, 4 wire system of supply) 50 HZ at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to Alternator or as recommended by the manufacturer on a common base frame and thereafter installed in the CPCB-II approved accoustic enclosure. (The complete set conforming to and test certificates as per CPCB norms and as specified) all as specified complete with AMF control panel standardized by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement flexible exhaust pipe complete and shall comprise the following :- (a) Engine (Prime Mover) : Diesel engine 1500 RPM of suitable BHP Turbo charged water cooled otherwise as applicable to the model mentioned 12 volts electric battery start, complete with fly wheel and all standard fittings/fixtures as per manufacturing practice including suitable engine control panel/Dash Board with electronic techometer. Lub oil temperature & pressure gauges water temp gauge and battery charging gauge including safety automatic shut down in case of fault detection such as high water temperature low librication on pressure, over speed and also including self starter alternator for charging of bateries, cogged V. Blet, fuel tank ( minimum 12 hrs capcity of consumption) with first fill of lub oil and coolant (as applicable) etc. (b) Alternator AC alternator, 3 phase, 415 volts, 4 wire rated line current output of 50 KW PP 0.8 1500 RPM insulation class enclosure/SPDP self excited, self regulated brushess, complete with AVR with +1% voltage regulation directly coupled to and match the above engine. (c) Anti vibration pads for mounting engine alternator assembly on the base frame/plate or as recommended/provided by the manufacturer. (d) Base plate : Made out of structural steel as per manufactuer"s recommended design and specifications. |
| 29 | (e) Acoustic Enclosure Provision of an integral type approved/certified acoustic enclosure Make of enclosure shall be as per CPCB for the DG sets to restrict the noise level to 75 dba at one meter It shall be made of 2mm thick CRCA /MS sheet with powder coated finish on outside and provided with non igniting fire resistance/retardant foam as acoustic material and provided opanable and lockable doors with air tight gasket, interior light arrangement 02 Nos 20 watt CFL with ON/OFF switch to meet latest emission norm. The base frame shall be of ISMC. It shall also include the follwing :- (i) Silencer : Absorption type non-resistance, resisdential and exhaust pipe covered with asbestos rope lagging . (ii) Internal wiring with PVC copper conductor cable IS 694 marked. FRLS in conduit and fluorescent lamp fittings (iii) Fuel tank of 12 hours capacity but not less than made of 14 SWG CRCA / MS sheet duly powder coated and provided with float, gauge and fuel float switch. (f) One Nos 12V x 100 AH 25 Plates maintenance free batteries complete with battery lead ,provided one side copper thimble and other side heay duty brass terminal (As recommended by manufacturer) Note (i) Catalogues Operation and maintenance manual, spare parts list overhauling manual 03 sets. (ii) Maintenance chart and manufacturer instruction shall be display on wooden board including catalogue board. (iii) Foundation for mounting of DG set shall be done as as per manufacturer design and the cost deemed to be included in the quoted rates of this items. (iv) The exhaust of DG set shall be fitted with emission control devices as per latest CPCB norms and as specified and also contractor shall submit test certificate of DG set as per latest CPCB norms. |
| 30 | Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burrieddirectly in groundverticallyto a depth not less than 2.25 metrebelowgroundlevelwith topedgeof theearth plate at a depth not less than 1.5 mtr belowgroundlevelearth platesurrounded from all sides by 15cmthickpacked layer ofcharcoal dust and common saftfillinginalternate layers andelectrodeconnectionby usingearth strip 25x 4 mm by meansof bolts, nuts, check nutsand washersmade of galvanised ironand thimbles and other endof theearth wire connectedto mainswitch boardprotected by galvanised iron light grade pipe 15mm borein wall/floor/andGI Pipe 20mm borelight grade forwatering with funnel and wiremesh PCC chamber in cementconcrete 1:3:6 typeC-2 and RCC pitcover includingnecessaryexcavation andearth work in anytype ofsoil, returningslurry approved soil and disposed of surplussoilto adistancenotexceeding 50 Mtraway all as shown inelectrical plateNo 3ofSSR 2009( Part-I). |
| 31 | EXTERNAL WATER SUPPLY WORKS |
| 32 | Material & labour for cutting of existing 150 mm dia C.I pipe line, inserting Tee for taking branch connection of 50mm dia including fittings complete all as specified and directed. |
| 33 | EQUIPMENTS |
| 34 | Supply and fixing kill waste unit 100 Kg/hr capacity with all standard accessories including, installation and commissioning complete all as specified and directed by Engr-in-Charge. It shallcomprises of the following:- Combustion Chamberbuild specifications (i) Material:Non Corrosive mild carbon steel of IS2062- GRADE B category Cylindrical Chamber as specified by BIS with Seamless Internal Pipe Manufactured by Jindal Steel/ Equivalent with Nano Technology Based space craft surface Paint. (ii) Dimension: Dia: 900mm, height; 1000mm, thickness: 8mm (Cylindrical part only. Upper and bottom conical area not included) (iii) Thermal insulation: (a) Inner phase: High quality Imported Fire Cement. Concrete (ARHEAT-K)/ Refractory FIRE BRICKS laid with primer Accoset 50 fine Refractory Cement. (b)Outer phase: With 50mm thick ceramic wool of Morgan Cerablanket 1260 C(Density – 64kg/m3). (c)Protected with 1.0mm thick aluminium plate of HINDALCO (22 gauge) withBlack Powder Coating. (d)Upper conical area made of mild steel plate of 6mm thickness and height600mm,lined inside with imported fire cement concrete (thermally treated). (iv) Erection: Erected upon four legs made of high quality TATA steel/ Equivalent, pipe of dia. 100mm and thickness 8mm scheduled 40 seamless pipes at 1000mm above ground level. (v) Other Features:waste loading door, cleaning door, peep hole, ash chamber with door. (vi) Volume: 0.99 cubic metre. |
| 35 | (b) Chimney (i) Material: STAINLESS STEEL PIPE GR. 304 (ii) Dimension: Dia: 200mm, Thick: 8mm/SS SCH 10S (iii) Effective Height: 20m from ground level (Chimney only) (c) Pollution Control Device 100Kg/hour with pollution monitoring system (i) Description: Multi- level pollution control water double scrubbing system, with depressurised water saving technology. Consumption- 1.6 Liters/ Min. (ii) Material: non- Corrosive mild carbon steel of IS 2062- GRADE B category Cylindrical Chamber as specified by BIS, Manufactured by Jindal Steel/ Equivalent- Thickness: 6mm. (iii) Erection: Erected upon four legs made of structural steel of make TATA/ JINDAL/Equivalent Brand of dia. 2”and thickness 5mm. (iv) Material used: Flanges -Type- E-Size-5"’, 8"’, 10" Coupling -Type- Schedule 40- Size - 2” Inlet Water Pipe-Type- ‘C’ Class- Brand- TATA/ JINDAL/ Equivalent- Size- ½” Discharge Water Pipe -Type- ‘C’ Class- Brand- TATA/ JINDAL/ Equivalent- Size- 2” (v) PCMS: Outdoor Monitoring Device: Features: - Advanced Sensors: Measures -PM2.5, PM10, SO2, NO2, CO2, Temp, Humidity. - 7 Segment display of 1X1 foot - Displayed Parameters:-PM2.5, PM10, SO2, NO2, CO2 - Access air pollution data on web with 1 year subscription. |
| 36 | Supply and fixing for dry waste segregation unit of capacity 2 tons/hr and capacity of main motor 2 HP 3 phase complete all as specified and directed by Engr-in-Charge.It shallcomprises of the following:- Manual Sorting Conveyer Power -2HP3 Phase Length 800mm Width 800mm Drum Pulley -220mm Shaft-50mm Gear Box.-Worm Type Belt -3 Ply rubber Sorting Height-900mm |
| 37 | Supply and fixing for kitchen waste shredder unit with motor of capacity not less than 20 HP 3 phase, complete all as specified and directed by Engr-in-Charge. It shallcomprises of the following:- Power-20 HP3 Phase Type -Dual Shaft Chamber -600mm x 400mm Cutter-10mm x 200mm Dia Cutter MOC -Alloy Steel Shaft-HEX 75mm MOC -MS |
| 38 | Supply and fixing hammer mill with chipper unit with motor 30 HP 3 Phase, chamber of size 100mm x 40mm, 4 Nos knives 60 Nos hammer and screen of sieve size 14mm, suitable for green and dry garden waste made of MS having capacity 2000 Kg/hr including control panel of Make: L&T / Schneider or equivalent as approved by GE. The model of dual shapt shall be ERS-DSS600 or equivalent as approved by GE. It shall comprises of the following:- Power -30 HP3 Phase Disc Dia -500mm Disc Thick-25mm Knives -4 No’s Hammer -60 No’s H Size. -100 x 40mm Section -4 No’s Screen -14mm MOC -MS |
| 39 | Supply and fixing HD multi purpose dual shaft shredder body made of MS with 10 HP 3 phase, motor, 600mm x 400mm chamber size, cutter 10mm thick x 200mm dia, cutter made of alloy steel, suitable for organic kitchen waste/ garden waste of capacity upto 500 Kg/hr including control panel of make L&T model ERS-DSS 600 or equivalent in SIEMEN, ABB, HAVELLS. It shallcomprises of the following:- Power-10 HP3 Phase Type -Dual Shaft Chamber -600mm x 400mm Cutter-10mm x 200mm Dia Cutter MOC -Alloy Steel Shaft-HEX 75mm MOC -MS |
| 40 | Supply and fixingfor trommel screen with feeding hopper and conveyor beltwith trommel screen with 10mm sieve with capacity of 300 Kg/hr. The belt conveyor for trommel screen have drive chain type with feeder 1000mm x 400mm and 5 HP3 phase motor including rubber belt of 3000mm length and 400mm width including central panel.It shallcomprises of the following:- Power-05 HP3 Phase Drum Dia-800mm Drum Length -2500mm Drum Pulley-220mm Shaft- 50mm Screen - 6mm Belt - 3 Ply 6mm MOC -MS |
| 41 | Supply and fixing vertical hydraulic type baler machine with 5 HP3 phase motor, bailing chamber of size of bailer 600mm x 400mm x 1000mm suitable for application on PET/HDPE/Papers/Beverage tins etc with capacity of 300 Kg/ltr.It shallcomprises of the following:- Power-5 HP3 Phase Chamber -600mm x 400mm x 1000mm Bale Size-600mm x 400mm x 500mm Type -Hydraulic Manual Bale Tie-Manual Bale Eject -Manual MOC -MS |
| 42 | Supply of small equipments as per following list:- (a) Plastic drum of 200 litre capacity – 2 Nos Make POLYSET/ SUPREME/NAYASA/MILTON (b) 50 Litre capacity plastic drum with lid – 04 Nos Make POLYSET/ SUPREME/NAYASA/MILTON (c) Plastic buckets with mug etc – 02 Set Make POLYSET/ SUPREME/NAYASA/MILTON (d) PVC pipe for washing irrigation etc of dia 1” & length 100 RM – 01 Set Make Godrej/pigon/Prestige/Kindle/AquaHose Note for Srl Item No. 8.01 to 8.09:- (i) Electric Motors shall of make. BCH/ CROMPTON/ KIRLOSKAR. |
| 43 | COMPOSIT PITS WITH COVER WORKS |
| 44 | Supply and fixing poly propylene sheet 5mm thick (colour and make as approved by GE) complete all as specified and directed by Engr-in-Charge |
| 45 | WASTE WATER COLLECTION TANK |
| 46 | Supply and fixing geomembrance as per manufacturer instruciton complete all as directed by Engr--in-Charge. |
| 47 | SEWAGE DISPOSAL WORKS |
| 48 | M&L installation and commissiong LLDPE conventional septic tank design for capacity 10 users heavy duty to carry out sewage and sludge water including excavation in any type of soil, PCC 1:4:8 Type D-2 as in sub base, vent shaft, connection etc complete all per manufacutrers instructions and as specified & directed by Engineer-in-Charge Make: Sintex/Supreme/Ferrotech. |
| 49 | Construction of Soakage well size 1.20 metre dia x 3.00 metreeffective depth complete all as specified and as shown on drawings. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
