Tender For 08 Repairing Works In Bathroom, Repair Of Doors, Windows And Miscellaneous Essential Works In 30 Bed Girls Hostel Of Pjm College Of Dairy Technology, Hansdiha Under Bau, Kanke, Ranchi.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jan 2023
0 days left
EMD
11000
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dumka → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing Works In Bathroom, Repair Of Doors, Windows And Miscellaneous Essential Works In 30 Bed Girls Hostel Of Pjm College Of Dairy Technology, Hansdiha Under Bau, Kanke, Ranchi.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plint level:1:2:4 (1 Cement : 2 Coarse sand (Zone-III) : 4 graded stone aggregate 20mm nominal size) |
| 2 | Providing designation 75A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I |
| 3 | Providing 12mm thick plaster (1:6) with clean coarse sand of FM 1.5 including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 4 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 5 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification anddirection of E/I |
| 6 | Supply, fitting & fixing thick solid core type non decorative single leaf flush shutter in doors all complete as per direction of E/IFor repair/ replaement of existing doors |
| 7 | Brass hanging type door stopper 150 mm |
| 8 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards,lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 9 | Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including preparing the surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I |
| 10 | Providing two coats of ready mixed paint of approved shade and made over steel surface including cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 11 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes and royalty all complete as per building specification and direction and of E/I |
| 12 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. |
| 13 | Providing 150 mm wide brick drain in C.M (1:6) do do- |
| 14 | Easing and adjusting door and window shutters with chaukhats in old work complete as per specification and direction of E/I. |
| 15 | S/F/F M S Grill made of 20 x 6 mm M.S. Flat all complete job |
| 16 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size,(Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade ccording to IS: 1868, Minimum anodic coating of grade AC 15) |
| 17 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness |
| 18 | Supplying and fixing ACP 4 mm thick |
| 19 | S/F/F the following items ofall complete jobBib Cock long thread(Rate=728.15) |
| 20 | Pillar cock lomg neck(806.5) |
| 21 | Towel rail |
| 22 | Shower |
| 23 | Connection pipe |
| 24 | Soap Container |
| 25 | S/F/F PVC Pipe for hot and cold waterwith fittings all complete job 15 mm dia |
| 26 | 25 mm dia |
| 27 | S/F/F PVC110 mm PipeRWD) all complete job- |
| 28 | S/F/FPVC pipe fittings all complete job-Bend |
| 29 | Shoe |
| 30 | Tee |
| 31 | Pipe clip |
| 32 | Carraige OF Materiala) Sand Lead 22 Km |
| 33 | b) Stone Chips Lead 22 KM |
| 34 | c) Bricks Lead 8 Km |
| 35 | Supply, fitting and fixing 4mm glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/I |
| 36 | Finishing walls with Acrylic Smooth exterior paint of required shade : 13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 37 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia |
| 38 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 39 | Supply, fitting and fixing 20 guage GCI sheet gate fitted on MS Angle frame of size 60x60x6mm including cost of fabrication providing necessary locking arrangement with haskal and domny duly fixed in PCC (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I |
| 40 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 41 | Wiring for circuit/submain wiring along with earthwire with the following sizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 42 | Wiring for circuit/submain wiring along with earthwire with the following sizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required.2 X 4.0 sq.mm+ 1 X 4.0 sq.mm earth wire |
| 43 | Supplying & fixing of following modular type switch/socket on the existing modular plateand switchbox including connection etc as requireda) 5/6 Amp switch |
| 44 | b)5/6 Amp socket |
| 45 | c)electronic fan regulator,deluxe |
| 46 | a) 15/16 Amp switch |
| 47 | b)15/16 Amp socket |
| 48 | Supplying and fixing batten/angle holder including connection etc. as reqd |
| 49 | Supplying and fixing of following LED fittings complete with connectionas required. Make- Bajaj/jaguar/ C&S or equivalent20/22 watt LED BATTEN |
| 50 | Supplying,Installation,testing and commissioning of following size ceiling fan 3 Blades confirming to IS :374:2019 including wiring the down rod s of standard length (upto30cm)with 1.5 sq.mm FRPVC insulated copper wire suitable for 230V 50 Hz,single phase supply etc complete as required.(for senate hall).1200mm(48”)Ceiling Fan |
| 51 | Providing and fixing following capacity ON/OFF load changeover switch with side handle operation in sheet steel enclosure and making connection etc. as reqd. 200 AMP, 4 pole |
| 52 | Supplying and fixing of 6 amp to 32 amp rating 240 V 10 KA B curve MCB suitable for inductive load of following poles6/32 Amp. |
| 53 | 48\" Ceiling fan rewinding with ball bearing |
| 54 | 12 Volt 100 AH sealed maintenance free(SMF) battery with 24 months replacement guarantee200 AMP, 4 pole |
| 55 | Labour welfare fund |
| 56 | GST @ 18 % |
AI Tender Summary
Tender Timeline
Jan 11, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 18, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 19, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender