Tender For 03 Minor Repairing Works In Bathroom, Repair Of Doors, Windows And Miscellaneous, Essential Work In Girls Hostel (Professors Qtr.-I) At Rnt Agriculture College, Deoghar Under Bau, Kanke, Ranchi.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jan 2023
0 days left
EMD
11000
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
deoghar → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Minor Repairing Works In Bathroom, Repair Of Doors, Windows And Miscellaneous, Essential Work In Girls Hostel ( Professors Qtr.-I ) At Rnt Agriculture College, Deoghar Under Bau, Kanke, Ranchi.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 3 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plint level:1:2:4 (1 Cement : 2 Coarse sand (Zone-III) : 4 graded stone aggregate 20mm nominal size) |
| 5 | Providing designation 75A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I |
| 6 | Providing 12mm thick plaster (1:6) with clean coarse sand of FM 1.5 including screening curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 7 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 8 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification anddirection of E/I |
| 9 | Supply, fitting & fixing thick solid core type non decorative single leaf flush shutter in doors all complete as per direction of E/IFor repair replaement of existing doors |
| 10 | Brass hanging type door stopper 150 mm |
| 11 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm hickness,including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm,pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 12 | Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including preparing the surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/I |
| 13 | Providing two coats of ready mixed paint of approved shade and made over steel surface including cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 14 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes and royalty all complete as per building specification and direction and of E/I |
| 15 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. |
| 16 | Providing 150 mm wide brick drain in C.M (1:6) do do- |
| 17 | Easing and adjusting door and window shutters with chaukhats in old work complete as per specification and direction of E/I. |
| 18 | S/F/F M S Grill made of 20 x 6 mm M.S. Flat all complete job |
| 19 | Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled ‘Z’ and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm MS lugs fixed in cement concrete (1:2:4) blocks 15x10x10cm size including cost of oxidized iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminium beades and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all stroys and taxes all complete as per building specification and direction of E/I |
| 20 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size,(Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade ccording to IS: 1868, Minimum anodic coating of grade AC 15) |
| 21 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness |
| 22 | Supplying and fixing ACP 4 mm thick |
| 23 | S/F/F the following items ofall complete jobMirror |
| 24 | Bib Cock long thread(Rate=728.15) |
| 25 | Pillar cock lomg neck(806.5) |
| 26 | Towel rail |
| 27 | Shower |
| 28 | Connection pipe |
| 29 | Soap Container |
| 30 | S/F/F PVC Pipe for hot and cold waterwith fittings all complete job15 mm dia |
| 31 | 25 mm dia |
| 32 | S/F/F PVC110 mm PipeRWD) all complete job- |
| 33 | S/F/FPVC pipe fittings all complete job- Bend |
| 34 | Shoe |
| 35 | Tee |
| 36 | Pipe clip |
| 37 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractorat his own cost and nothing extra will be paid on this account) |
| 38 | Carraige OF Materiala) Sand Lead 22 Km |
| 39 | b) Stone Chips Lead 22 KM |
| 40 | c) Bricks Lead 8 Km |
| 41 | Supply, fitting and fixing 4mm glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/I |
| 42 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm)on existing cement paint surface |
| 43 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia |
| 44 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete. |
| 45 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other S.S.approved make with 100mm H.C.I. ‘p’ trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S.equivalent make, complete with all fittings,C.I. or C. C.brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.(A) 580 mm. long 10 ltr low PVC Cistern |
| 46 | Wiring for circuit/submain wiring along with earthwire with the following sizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 47 | 2 X 4.0 sq.mm+ 1 X 4.0 sq.mm earth wire |
| 48 | Supplying & fixing of following modular type switch/socket on the existing pianoand switchbox including connection etc as requireda) 5/6 Amp switch |
| 49 | b)5/6 Amp socket |
| 50 | c)electronic fan regulator,deluxe |
| 51 | a) 15/16 Amp switch |
| 52 | b)15/16 Amp socket |
| 53 | Supplying and fixing batten/angle holder including connection etc. as reqd |
| 54 | Supplying and fixing of following LED fittings complete with connectionas required. Make- Bajaj/jaguar/ C&S or equivalent20/22 watt LED BATTEN |
| 55 | Supplying,Installation,testing and commissioning of following size ceiling fan 3 Blades confirming to IS :374:2019 including wiring the down rod s of standard length (upto30cm)with 1.5 sq.mm FRPVC insulated copper wire suitable for 230V 50 Hz,single phase supply etc complete as required.(for senate hall).1200mm(48”)Ceiling Fan |
| 56 | 48\" Ceiling fan rewinding with ball bearing |
| 57 | Supplying and fixing of 6 amp to 32 amp rating 240 V 10 KA B curve MCB suitable for inductive load of following poles6/32 Amp. |
| 58 | Lightning finial 25 mm dia x 300 mm long, copper |
| 59 | 20 mm x 3 mm (.533 Kg per mtr. Copper tape |
| 60 | Earthing with copper earthplate 600 mm x 600 mm x 3 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangements and watering pipe etc.( with charcoal and salt) as reqd. |
| 61 | Labour welfare fund |
| 62 | GST @ 18 % |
AI Tender Summary
Tender Timeline
Jan 11, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 18, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 19, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender