Tender For Procurement Of Spares For Excentric Crusher Of Unit 6 Under Ahp (Mm) Dept.,Stps, Purulia-West Bengal

Procurement Of Spares For Excentric Crusher Of Unit 6 Under Ahp (Mm) Dept.,Stps , Gland Packing 1 Set=2 Nos For Bottom Ash Crusher Dcips Drg.No.28P03-1B-T-582(Rev-2) Additional Data: For Dcips Design 250 Mw Unit;Moc-Ci Fg260;Is-210;1 Set = 2 Nos Gland Packing , Lantern Ring (1 Set=2 Nos.) For Bottom Ash Crusher As Per Drawing No.28P03-1B-T-582(Rev-2) Additional Data: For Dcips Design 250 Mw Unit;Moc-Brass Ltb2;Is 318 , Packing Ring For Bottom Ash Crusher Additional Data: For Dcips Design 250 Mw Unit; , Packing Gland Follower (1 Set=2 Nos.) For Bottom Ash Crusher As Per Drawing No.28P03-1B-T-582(Rev-2)Additional Data: For Dcips Design 250 Mw Unit;Moc-Brass Ltb2;Is 318 , Packing Gland Flange For Bottom Ash Crusher As Per Drawing No.28P03-1B-T-582(Rev-2) Additional Data: For Dcips Design 250 Mw Unit;Moc-Ms Is2062;Gr -A , Slinger For Bottom Ash Crusher Drawing No.28P03-1B-T-582(Rev-2) Additional Data: For Dcips Design 250 Mw Unit;Moc-Ms Is2062;Gr -A , Sprocket Drive And Driven For Bottom Ash Crusher Dcips Drg.No.28P03-1B-T-582(Rev-2) Additional Data: For Dcips Design 250 Mw Unit;Drive Sprocket - Cast Iron Fg 260/ Steel Casting , Gear Tip Hardened . Driven Sprocket - Cast Iron / Steel Casting Tip Hardened To 460 Bhn. The Sprockets Should Match With The Existing Chain At Site. , Feed Sump For Clinker Grinder For Bottom Ash Crusher Dcips Drg.No.28P03-1B-T-582(Rev-2) Additional Data: For Dcips Design 250 Mw Unit , Chain (Simplex) For Drive Arrangement For Bottom Ash Crusher Dcips Drg.No.28P03-1B-T-582(Rev-2) Additional Data: For Dcips Design 250 Mw Unit;Chain Will Have 1 1/2 In Pitch ,Ansi # 140 , Estimated Length 6400Mm.The Chain To Be Supplied With One Connector & One Link. The Chain Should Fit The Existing Sprockets At Site , Adjustable Seating Wedge # For Bottom Ash Feed Gate Assembly As Per Drawing No.28P03-1B-T-576(Rev-2) Additional Data: For Dcips Design 250 Mw Unit , Labyrinth Ring For Bottom Ash Crusher Dcips As Per Drawing No.28P03-1B-T-582(Rev-2) Additional Data: For Dcips Design 250 Mw Unit , Bearing Housing Nde For Bottom Ash Crusher Dcips As Per Drawing No.28P03-1B-T-582(Rev-2);Without (Bearing ,Labyrinth Ring - 2 Nos. ; Oil Seal - 2 Nos. ; Fastners - 1 Lot Bearing Additional Data: For Dcips Design 250 Mw Unit , Bearing Housing De For Bottom Ash Crusher Dcips As Per Drawing No.28P03-1B-T-582(Rev-2);Without (Bearing ,Labyrinth Ring - 2 Nos. ; Oil Seal - 2 Nos. ; Fastners - 1 Lot Bearing Additional Data: For Dcips Design 250 Mw Unit

Refer document

INR 12000.0 /-

Refer document