Tender For Work Of Setting Up 1 Tourist Information Center / Guide Desk At Shilpgram
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Jan 2023
0 days left
EMD
19000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Work Of Setting Up 1 Tourist Information Center / Guide Desk At Shilpgram
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary Soil (Loam, Clay or sand) including lift upto 1.50 M and lead Upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as per directed by the Engineer-in-charge up to a distance of 30M from the foundation trenches. (S.No. 251) |
| 2 | Dismentling of flexible pavement and disposal of dismantle material upto a lead of 100 meter, stacking sevicable and unseviceable materials separately.(PWD SOR-2019-20, SI No. 13) |
| 3 | Dismantling doors and windows leaves including chaukhats but excluding hold fasts and including stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet) SOR 2022-23, S.I. No.-12 |
| 4 | Providing and laying cement concrete in 1:4:8 (1 cement : 4 coarse sand: 8 graded stone aggregate 40mm nominal size) and curing complete. Including cost of form work in foundation and floors. (Chapter-5, SI No. 2) SOR-2022-23 |
| 5 | Providing and laying cement concrete in 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) and curing complete. Including cost of form work in foundation and floors. (Chapter-5, SI No.-7) SOR 2022-23 |
| 6 | Mild street or iron work in plain work such as reinforced concrete or reinforced brick (when not included in an overall retes) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and quthorized overlapping shall be measured uo tp floor two (AR) |
| 7 | Steel work in built up tubular (round, square or rectungular hollow tubes etc.) trusses etc. including cutting, hosting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with spedial shaped washers etc. complete. Hot finished selded type tubes. SOR- 10.16.1 (2022-23) |
| 8 | Supply & claddin of 4mm thick aluminium composite panel in the interior and exterior walls and both sides of internal ms partitions, screwed and duely sealed with silicon of BIS standard, complete including centering and shuttering etc. Lowest Quotation Rate |
| 9 | Supply and fixing of glazed aluminium window shutters of 16 guage including powder coating all fittings such as hinges, handles stays in two sliding upward including 6mm toughned glass etc complete. Lowest Quotation Rate |
| 10 | Supply and fixing of glazed aluminium door shutters of 16 guage including powder coating all fittings such as hinges, handles stays in two sliding upward including 6mm toughned glass etc complete. Lowest Quotation Rate |
| 11 | Supply and fixing of double layered polycarbonat sheet over ms rafters in roof, screwed and sealed with silicon of BIS make etc. complete. Lowest Quotation Rate |
| 12 | Supply and fixing of 6mm fixed toughed glass sealed with silicon/Gasket etc. complete. Lowest Quotation Rate |
| 13 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in ture horizontal level, suspensed on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center tp center tp form a grid of 1200x600 mm and secondary cross \"T\" of length 600mmand size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form frids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings,fixtures, smoke detectors etc. Main \"T\" runners to be suspensed from ceiling using GI slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners,4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyster paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop made of GI sheet having galvaning of 100 gms/sqm (both sides inclusive) ena electro statically polyster powder coated of thickness 60 microns (minimum), including factory painted after bending. DSR Specification 12.52.1 SOR Page No. 37 |
| 14 | Providing and laying Vitrified tiles in floor without lean concrete of 500x500mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, Including grouting of joints. 41.11.1A-SOR 2022-23 Chapter Page-42 |
AI Tender Summary
Tender Timeline
Jan 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 16, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender