Public Works Department-PWD has published Tender For Construction Of Security Cabin At Quepem Court. Submission Date for this Tender is 31-01-2023. Cabin Tenders in quepem Goa. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 17-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 31-01-2023 |
Sl. No. | Item Description |
1 | Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area |
2 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.a) All kinds of soil. |
3 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
4 | Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggregate 40mm. nominal size) excluding cost of centering, shuttering and finishing in:a) All works upto plinth level. |
5 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement: 4 coarse sand)in foundation and basement. |
6 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement: 4 coarse sand)in foundation and basement.Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level. |
7 | Centering & shuttering including Strutting, Propping & removal of forms for:(iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth. |
8 | Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates.i) Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only. |
9 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand: 3 graded stone aggregate 20mm nominal size). c) In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level. |
10 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floorsalongwith the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
11 | Providing FRP door shutters 35mm thick with frame size in clear opening of 0.75x2.10m hinges and screws complete. |
12 | Proving and fixing anodised alluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Window with two or three sliding shutters using 14.5/15 mm series shutters section. b) Plain glass |
13 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section. |
14 | Providingand fixing coloured ceramic tiles spartek or equivalent of 12 " x 12" (399x150 mm cut size) 6 mm thick in skirting and dados on 12 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) andjointed with cement slurry complete. |
15 | Providing and fixing coloured ceramic tiles spartek or equivalent of 12" x 12" size and 6 mm thick in floors thread of stepsand landing on 25 mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
16 | 12mm cement plaster 1:4 (1 cement: 4 fine sand). |
17 | 6mm cement plaster to ceiling 1: 4 (1 cement: 4 fine sand). |
18 | Finishing fine with neeru over plaster. |
19 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and top layer 6mm thick with cement plaster 1:3 (1 cement: 3 coarse sand) finished with sponge. |
20 | Extra for plastering done on moldings, cornices, orarch it ravesincluding neat finish to line and level.a) In one coat |
21 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
22 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
23 | Cuddappah stone slab machine cut flooring over 20mm (average) thicknessof cement mortar 1:4 (1 cement: 4 coarse sand laid over and jointed with grey cement slurry mixed withpigment to match the shade of the slab includingrubbingandpolishing complete - 25 mm thick. |
24 | Steel work in single sections (SAIL, TATA, VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.a) In R.S. joists, channels, angles, tees. |
25 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
26 | Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
27 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40x3 mm size complete.a) 140 mm nominal size. |
28 | Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid over and jointed with cement slurry including rubbling complete Granitic slab (jet blck with mirror polish) 20 mm thick add q0% wastage 1.00. |
29 | Add 20% adohac increase onall items except items nos. 4,8,9,10,& 24 i.e on Rs.97,483.77 as per Corrigendum. No. 3-3-05/SSW-PWD/Vol.i/2022-23/16 dt. 17/08/2022 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail