Construction Of Office Building Of Assistant Director Of Horticulture, Nilgiri, Baleswar
Tender Value
41.69 Lakhs
Estimated cost
Bid Submission
20 Jan 2023
0 days left
EMD
41692
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nilagiri → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Office Building Of Assistant Director Of Horticulture, Nilgiri, Baleswar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Jan-2023 | CORRIGENDUM | Technical Bid | 20-Jan-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation in all kinds of soil within initial lead and initial lift including rough dressing and breaking rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 m in depth including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. |
| 2 | Supplying, Filling sand infoundation & plinth well watered and rammed including cost, conveyance, taxes, royalty of sand, labour & T&P, Labour welfare cess@1% etc. complete as per specification and direction of the EIC. |
| 3 | Cement Concrete (1:4:8) by using 40 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. |
| 4 | Reinforced Cement Concrete M20 grade 20mm & down graded size hard granite crusher broken chips of approved quality and from approved quarry including centring, shuttering, lowering, laying concrete, watering and curing etc. complete for required levels laid in layers including cost, conveyance, royalty and taxes of all materials and cost of labour, T&P,Labour Welfare cess @1% required for the work etc. complete as per specification and direction for the EIC. |
| 5 | Ground Floor |
| 6 | Column base, frustum, plinth band |
| 7 | Bed Block |
| 8 | Column and beam |
| 9 | Lintel |
| 10 | Sun shade and Chajja |
| 11 | Roof slab |
| 12 | Stair Case |
| 13 | First Floor |
| 14 | Bed Block |
| 15 | Column and beam |
| 16 | Lintel |
| 17 | Sun shade and Chajja |
| 18 | Roof slab |
| 19 | Stair Case |
| 20 | Supplying MS round / deformed / tor steel reinforcement bars (of only manufacturing companies such as SAIL / RINL / TATA / JINDAL STEEL / SHYAM STEEL) (of approved grade) of required diameters of approved quality including straightening, cutting to size, bending, and binding, lifting and placing in positionas per design, complete including cost of bars, binding wires 18 gauge, including cost of all materials , labour, conveyance, loading and unloading, taxes, cess, royalties. sundries, tools and plants etc. Labour Welfare cess @1% completeas per the direction of the EIC. (Linear measurement will be taken and quantity will be calculated on standard weight for all heights). |
| 21 | Ground Floor |
| 22 | First Floor |
| 23 | Providing Fly Ash brick masonry workusing 230 mm X 110 mm X 80 mm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., Labour Welfare cess @1% completeas per the direction of the EIC. |
| 24 | Plinth & Foundation work |
| 25 | Superpstrucutre work in ground floor |
| 26 | Superpstrucutre work in first floor |
| 27 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 28 | Ground Floor |
| 29 | First Floor |
| 30 | 16 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 31 | Ground Floor |
| 32 | First Floor |
| 33 | 12 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 34 | Ground Floor |
| 35 | First Floor |
| 36 | Supplying, Fitting and fixing Vitrifiedtiles in Floors of size 600 mm x 600 mm of approved make conforming to IS13755 laid on20 mmthick cement mortar [1:4]filling joined with white cement of approved quality icomplete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. [For New work only] |
| 37 | Ground Floor |
| 38 | First Floor |
| 39 | Fixing Ceramic tiles size 30 cm x 30 cm / 40 cm x 40 cm in Floors, Treads on steps & landing on 25 mmthick bed ofcement mortar [1:1]joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 40 | Ground Floor |
| 41 | First Floor |
| 42 | Fixing Ceramic tiles 20 cm x 30 cm / 20 cm x 20 cm in Dado, Skirting and rises of steps on 12 mmthick cement mortar[1:3]joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing completeincluding rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 43 | Ground Floor |
| 44 | First Floor |
| 45 | Supplying, Fitting and fixing Vitrified industrial floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS 1457 of size 300 mm x 300 mm laid on20 mmthick cement mortar [1:4]filling joined with white cement of approved quality icomplete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. [For New work only] |
| 46 | Ground Floor |
| 47 | First Floor |
| 48 | Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 49 | Ground Floor |
| 50 | First Floor |
| 51 | Finishing walls with water proofing Cement paint of approved shade on new work two coats to give an even shade including watering and curing complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 52 | Ground Floor |
| 53 | First Floor |
| 54 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 55 | Ground Floor |
| 56 | First Floor |
| 57 | Finishing exterior walls with Weather Seal Coat Paintof approved shade on new work two coats to give an even shadecomplete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 58 | Ground Floor |
| 59 | First Floor |
| 60 | Supplying, fitting & fixing in position & drawingof PVC/FRP panel type single doors shutter with chowkhat framed & fixed [with & Put up]complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 61 | Ground Floor |
| 62 | First Floor |
| 63 | Finishing inside walls with Distemper of approved shade on new work two coats to give an even shade complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 64 | First floor |
| 65 | Supplying, fitting & fixing in position & drawingof Window (sliding type) made of aluminum section 9778 as windows frame section No. 4095, 4096, and 9777, 3994 as shutter frame with 5 mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 66 | Ground Floor |
| 67 | First Floor |
| 68 | Supplying, fitting & fixing in position & drawing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe barracking of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 69 | Ground Floor |
| 70 | First Floor |
| 71 | Supplying, fitting and fixing of powder coated M.S. collapsible gate/Window grill/Ventilator etc made out of M.S. square bar / M.S. flats / M.S. angles as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering, complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 72 | Ground Floor |
| 73 | First Floor |
| 74 | Priming one coat to surface with Red oxide Primer complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 75 | Ground Floor |
| 76 | First Floor |
| 77 | Painting two coats with approved paint on new wood work complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 78 | Ground Floor |
| 79 | First Floor |
| 80 | 2.5 cm thick grading concrete [1:2:2 ] on roof slab with 6 mm sizechipsincluding rubbing and polishing etc. complete including watering and curing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 81 | Ground Floor |
| 82 | First Floor |
| 83 | Provision for staging overhead watertank |
| 84 | Internal Electrical Installation WorkGROUND FLOORRecessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. [Group-C] |
| 85 | Providing, Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 86 | Providing, Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 87 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 88 | Supplying and fixing LED Bulb ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 89 | 9 Watt LED Bulb |
| 90 | 15 Watt LED Bulb |
| 91 | 23 Watt LED Bulb |
| 92 | Supply, Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 93 | Supply, Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 94 | Installation, testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 95 | Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 96 | Providing & Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 97 | Providing & Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 98 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 1 x1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex/ L&T/Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 99 | Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 100 | Recessed wiring to submain in 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 101 | Supply, Installation, Testing, and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. Make- SEIMENS /HPL /ANCHOR /L&T /HAVELS /C & S/ RK |
| 102 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 103 | Supply and fixing of 5 amp to 32 amp rating 240 V \"B\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 104 | Providing and fixing of earth bus of 50 mm x 5 mm copper strip ISI marked on surface for connection etc as required. |
| 105 | Supply and fixing of 20 amp 240 V SPN industrial type socket outlet with 2 pole and earth metal encloser plug top along with 20 amp \"C\" series SP MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete connections, testing and commissionig etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 106 | FIRST FLOORRecessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. [Group-C] |
| 107 | Providing, Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 108 | FIRST FLOORProviding, Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 109 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 110 | Supplying and fixing LED Bulb ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 111 | 9 Watt LED Bulb |
| 112 | 15 Watt LED Bulb |
| 113 | 23 Watt LED Bulb |
| 114 | Supply, Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 115 | Supply, Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 116 | Installation, testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 117 | Providing & Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 118 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 1 x1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex/ L&T/Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 119 | Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 120 | Recessed wiring to submain in 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 121 | Supply, Installation, Testing, and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. Make- SEIMENS /HPL /ANCHOR /L&T /HAVELS /C & S/ RK |
| 122 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 123 | Supply and fixing of 5 amp to 32 amp rating 240 V \"B\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 124 | Internal PH & Sanitary works GROUND FLOOR Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refiling of trenches, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and directionof the Engineer-in-charge |
| 125 | 110mm U-PVC SWR Pipe(Ori Plast/Finolex/Supreme/ Make Type-B) |
| 126 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 127 | 110mm U-PVCdoor bend (Ori Plast/Finolex/Supreme Make) |
| 128 | 110mm U-PVC Plain bend (Ori Plast/Finolex/Supreme Make) |
| 129 | 110mm U-PVC Cowl (Ori Plast/Finolex/Supreme Make) |
| 130 | 110mm U-PVC HR bend(Ori Plast/Finolex/Supreme Make) |
| 131 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 132 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 133 | Supplyingall materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/VC pipes, class-IV (10 kg F/cm) on filming I.S. 4985 of the following nominal bore, tube and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. |
| 134 | 15 mm dia PVC ASTM pipe (sch-80) |
| 135 | 25 mm dia PVC ASTM pipe (sch-80) |
| 136 | 40 mm dia PVC ASTM pipe (sch-80) |
| 137 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of alljointing materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 138 | 15 mm dia CP bib cock ( Plaza Make) |
| 139 | 15 mm CP Extension piece |
| 140 | 125 mm CP grating |
| 141 | 15 mm size C.P. flange |
| 142 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking G.I Pipes and fittings/P.V.C pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per direction of Engineer-in-charge. |
| 143 | Supplying all materials, labour, T&P and cutting holes in RCC floors and roofs up to 19cm for passing P.V.C pipes and G.I fittings etc. and repairing the holes after insertion of pipe etc. with cement concrete(1:2:4) including finishing complete so as to make it leak proof as per P.H specification and direction of Engineer-In-charge. |
| 144 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4 cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mmx 30mm footrest, fixing 100mm dia HCL ‘p’ or ‘s’ trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages, cost & conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. [580mm size Orissa pan (Hindwrare/Parryware/Neycer make)] |
| 145 | Supplying all materials, labour T&P and fixing 12.50 litres/10 litres capacity low level flushing cistern with a pair of cast iron or M.S bracketscomplete with fittings such as siphonic arrangements 15mm nominal size brass/PVC ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. [10 ltr. Capacity PVC low levelCistern with 32mm dia CP long flush bend (Slimline-white-Parryware make)] |
| 146 | Suppying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S brackets painted white including cuttingholes in walls and making good the damages with supply of wooden plugs, screws and cement etc fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32,, nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstain head screw down high pressure lettered “Hot” and “Cold” with long screws, shanks and back nits of 15mm dia nominal bore, fixing with long screws, shanks and back nuts of 15mm dia nominal bore,fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all cost & conveyance of all materials to worksite, payment of taxes etc all complete as per P.H specification and direction of the Engineer-in-charge. [550mmx400mm W.H basin(Hindware/Parryware/Neycer make) with 15mm dia C.P pillar cock (Plaza make)] |
| 147 | Supplying all materials, labor, T&P and fixing Bowl pattern Gents UrinalwithCP screws including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixingPVC waste pipe of 32mm nominal diameter for Urinalincluding brass check nut complete , fixing Angle Valve fixing 15 mm dia PVC inlet connection pipe and making connection with Angle Valve and supply mains for Urinal , fixing 32mm dia CP brass waste, etc. all completeas per the specification and direction of the Engineer in charge.Bowl pattern Urinal[Parryware make] |
| 148 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge. [25 mm x 600 mm long CP Towel Rail.] |
| 149 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer-in-charge.[600 mm x 125 mm plate glass shelf] |
| 150 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer-in-charge. [600 mm x 450mm size B.E Mirror] |
| 151 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge. [CP soap holder] |
| 152 | Supplying all materials labour T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer-in-charge. [½” x 5” CP shower] |
| 153 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc all complete as per P.H specification and direction of Engineer-in-charge |
| 154 | Supplying all materials, labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H specification and direction of Engineer-in-charge |
| 155 | Providing and fixing 25 mm diameter Gate Valve complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 156 | Supplying all materials, labour, T&P and layingtrenches (to level or slope) un-plasticized P.V.C pipe conforming to IS 4985/2000 of the following outside dia for class-3 (0.60 mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc. all complete as per P.H specification and direction of the Engineer-in-charge. [110mm dia P.V.C pipe] |
| 157 | INTERNAL PH & Sanitary worksFIRST FLOORSupplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refiling of trenches, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and directionof the Engineer-in-charge |
| 158 | 110mm U-PVC SWR Pipe(Ori Plast/Finolex/Supreme/ Make Type-B) |
| 159 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 160 | 110mm U-PVCdoor bend (Ori Plast/Finolex/Supreme Make) |
| 161 | 110mm U-PVC Plain bend (Ori Plast/Finolex/Supreme Make) |
| 162 | 110mm U-PVC Cowl (Ori Plast/Finolex/Supreme Make) |
| 163 | 110mm U-PVC HR bend(Ori Plast/Finolex/Supreme Make) |
| 164 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 165 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 166 | Supplyingall materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/VC pipes, class-IV (10 kg F/cm) on filming I.S. 4985 of the following nominal bore, tube and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. |
| 167 | 15 mm dia PVC ASTM pipe (sch-80) |
| 168 | 25 mm dia PVC ASTM pipe (sch-80) |
| 169 | 40 mm dia PVC ASTM pipe (sch-80) |
| 170 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of alljointing materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 171 | 15 mm dia CP bib cock ( Plaza Make) |
| 172 | 15 mm CP Extension piece |
| 173 | 125 mm CP grating |
| 174 | 15 mm size C.P. flange |
| 175 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking G.I Pipes and fittings/P.V.C pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per direction of Engineer-in-charge. |
| 176 | Supplying all materials, labour, T&P and cutting holes in RCC floors and roofs up to 19cm for passing P.V.C pipes and G.I fittings etc. and repairing the holes after insertion of pipe etc. with cement concrete(1:2:4) including finishing complete so as to make it leak proof as per P.H specification and direction of Engineer-In-charge. |
| 177 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4 cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mmx 30mm footrest, fixing 100mm dia HCL ‘p’ or ‘s’ trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages, cost & conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. [580mm size Orissa pan (Hindwrare/Parryware/Neycer make)] |
| 178 | Providing and fixing 25 mm diameter Gate Valve complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 179 | Supplying all materials, labour T&P and fixing 12.50 litres/10 litres capacity low level flushing cistern with a pair of cast iron or M.S bracketscomplete with fittings such as siphonic arrangements 15mm nominal size brass/PVC ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. [10 ltr. Capacity PVC low levelCistern with 32mm dia CP long flush bend (Slimline-white-Parryware make)] |
| 180 | Suppying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S brackets painted white including cuttingholes in walls and making good the damages with supply of wooden plugs, screws and cement etc fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32,, nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstain head screw down high pressure lettered “Hot” and “Cold” with long screws, shanks and back nits of 15mm dia nominal bore, fixing with long screws, shanks and back nuts of 15mm dia nominal bore,fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all cost & conveyance of all materials to worksite, payment of taxes etc all complete as per P.H specification and direction of the Engineer-in-charge. [550mmx400mm W.H basin(Hindware/Parryware/Neycer make) with 15mm dia C.P pillar cock (Plaza make)] |
| 181 | Supplying all materials, labor, T&P and fixing Bowl pattern Gents UrinalwithCP screws including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixingPVC waste pipe of 32mm nominal diameter for Urinalincluding brass check nut complete , fixing Angle Valve fixing 15 mm dia PVC inlet connection pipe and making connection with Angle Valve and supply mains for Urinal , fixing 32mm dia CP brass waste, etc. all completeas per the specification and direction of the Engineer in charge.Bowl pattern Urinal[Parryware make] |
| 182 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge. [25 mm x 600 mm long CP Towel Rail.] |
| 183 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer-in-charge.[600 mm x 125 mm plate glass shelf] |
| 184 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer-in-charge. [600 mm x 450mm size B.E Mirror] |
| 185 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge. [CP soap holder] |
| 186 | Supplying all materials labour T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer-in-charge. [½” x 5” CP shower] |
| 187 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc all complete as per P.H specification and direction of Engineer-in-charge |
| 188 | Supplying all materials, labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H specification and direction of Engineer-in-charge |
| 189 | External PH & Sanitary worksEarthwork in excavation of foundation in all kinds of soil within initial lead and initial lift including rough dressing and breaking rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 m in depth including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. |
| 190 | Supplying, Filling sand infoundation & plinth well watered and rammed including cost, conveyance, taxes, royalty of sand, labour & T&P, Labour welfare cess@1% etc. complete as per specification and direction of the EIC. |
| 191 | Cement Concrete (1:4:8) by using 40 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. |
| 192 | Plain cment concrete (1:2:4) using 12 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC. |
| 193 | Providing Fly Ash brick masonry workusing 230 mm X 110 mm X 80 mm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., Labour Welfare cess @1% completeas per the direction of the EIC. in F & P |
| 194 | Reinforced Cement Concrete M20 grade 20mm & down graded size hard granite crusher broken chips of approved quality and from approved quarry including centring, shuttering, lowering, laying concrete, watering and curing etc. complete for required levels laid in layers including cost, conveyance, royalty and taxes of all materials and cost of labour, T&P,Labour Welfare cess @1% required for the work etc. complete as per specification and direction for the EIC. in G.Floor |
| 195 | Supplying MS round / deformed / tor steel reinforcement bars (of only manufacturing companies such as SAIL / RINL / TATA / JINDAL STEEL / SHYAM STEEL) (of approved grade) of required diameters of approved quality including straightening, cutting to size, bending, and binding, lifting and placing in positionas per design, complete including cost of bars, binding wires 18 gauge, including cost of all materials , labour, conveyance, loading and unloading, taxes, cess, royalties. sundries, tools and plants etc. Labour Welfare cess @1% completeas per the direction of the EIC. (Linear measurement will be taken and quantity will be calculated on standard weight for all heights). |
| 196 | 12 mm thick cement plaster (1:4)finished smooth to roughsurface of230 mm thick brick walls after raking out the joints including watering and curing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 197 | Cement punning including watering and curing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 198 | Supply, fixing of RCC pre-castrings of 0.9 m dia, 0.3 m height, 0.050 m wall thickness in soak pit complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. For Soak Pit |
| 199 | 10 cm thick dry brick khoa backing in soakpit complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC. |
| 200 | Supplying all materials, labour, T&P and constricting inspection Chamber of inside size 760mmx760mmx460mm with cement(1:3:6)using 40mm size crusher broken hard black granite metal on bed, KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside R.C.C cover slab (1;2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc all complete as per approved drawing P.H specification and direction of Engineer-in-charge. [Inside size 76cm x76 cmx 46cm with 18”dia RCC MH cover] |
| 201 | Supplying all materials, labour, T&P and constructing gully trap chamber of inside ‘size 250 mm x 250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken in HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCL gully trap, 150mmx150mm size Cl grating etc, all complete as per drawing, specification and direction of Engineer-in-charge |
AI Tender Summary
Tender Timeline
Jan 17, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 20, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 25, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender