Uttaranchal Pey Jal Nigam has published Tenderfor Kachunda Solar Pumping Water Supply Scheme Phase-Ii Construction Of Source Cwr Laying, Jointing And Testing Of Gi Pipe Line, Providing Fhtc And Other Appurtenant Works Kachunda Solar Pumping Water Supply Scheme Phase-Ii Along With Handing Over T. Submission Date for this Tender is 23-01-2023. Water Pipe Line Tenders in yamkeshwar Uttarakhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supply of all material, labour, T&P etc. all complete and provide 90 cm high RCC cross wall at gadhera tapping point for the protection of intake from flood storm. |
| 2 | Earth work in excavation by mechanical means(hydraulic excavator) / manual meansin foundation trenches or drains (not exceeding 1.5 mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift up to 1.5 mtr including gettingout the excavated soil and disposal of surplus excavated soil as directed, within a lead of50 m. |
| 3 | Ordinary rock |
| 4 | Dewatering of water including cartage of pumps, oil lubricants, labour etc. complete for gadhera diversion works. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering and shutteringfinishing and reinforcement -all work up to plinth level in 1:1.5:3(1cement:1.5coarse sand: 3grad aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness) including attached plasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, post and struts etc up to floor five level excluding the cost of centering and shutteringfinishing and reinforcement -all work up to plinth level in 1:1.5:3(1cement:1.5coarse sand: 3grad aggregate 20 mm nominal size) |
| 7 | Reinforcement for R.C.C. work including straightening, cutting, banding, placing in position and binding all complete reinforcement for RCC work using thermo mechanically treated bars. |
| 8 | Centering & shuttering including strutting, roping etc. and removal of form work for walls (any thickness) including attached pilasters, buttresses, plinth and string coarse etc. |
| 9 | Supply and fixing washout as per required size of min length 2.0 mtr length and min size of 25 mm dia GI (med) pipe to be provide as per direction of Engineer-in-charge. |
| 10 | Supply of all materials, labour and T & P etc. for onstruction of double intake chamber with drain & filter media as per type design, drawing & as per direction of Engineer-in-charge. |
| 11 | Supply, Carting, lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe line by welding for making up lengths as required for proper completion of work of following grade & sizes MS ERW Pipe Yst 210 |
| 12 | 50 mm dia, 4.8 mm thick |
| 13 | Providing of all materials, carting from site store to site of work, laying & jointing of G.I. screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc.) in trenches with its cutting, threading and testing of pipe line etc complete. |
| 14 | 15mm dia |
| 15 | 20mm dia |
| 16 | 25mm dia |
| 17 | 32mm dia |
| 18 | 40mm dia |
| 19 | Excavation of earth for pipe line in following strata lift upto 1.5m. Lead upto 30m. Including refilling,watering,ramming of excavated earth into the trenches and removal of surplus earth upto adistance of 60m. Fromtrenches including supply of labour,T&P.etc complete. |
| 20 | Soil mixed with boulder and bajri |
| 21 | Medium Rock |
| 22 | Cartage of following sizes of valves and fitiings upto site of work and fixing the same in water supply lines including cost of valves, specials, labour and T&P complete in all respect but excluding the cost of earth work and construction of chamber |
| 23 | 50 mm dia cast steel Sluice/Scour Valve, W.P. 50Kg/cm2 |
| 24 | 50 mm dia cast steel Reflux/Swing Check Valve, W.P. 50Kg/cm2 |
| 25 | 50 mm dia cast steel Double Air Valve Flanged type, W.P. 25Kg/cm2 |
| 26 | G.M. Wheel valves (Class I) as per IS 778/1971 40 mm dia |
| 27 | G.M. Wheel valves (Class I) as per IS 778/1971 32 mm dia |
| 28 | C.I. Air Valve (Screwed) 15 mm dia |
| 29 | Construction stone masonry Wheel Valve/ Air valve chamber (60x60x60) cm, inside in 1:4 cement & sand mortar with MS MH cover on top the chamber with proper locking arrangement. |
| 30 | Supply of all materials, labour, T & P etc. and Construction of Thrust Block as per type design complete (1 in 200 m length Pipeline), size of block- 0.60m x 0.60m x 0.80m |
| 31 | Supply of all materials, labour T&P etc complete and construct pump house (5.5m x 5.0m x 4.5m)as per type design at MPS. |
| 32 | Provision of 1.5 m high Boundary Wall in brick masonry including supply of all materials, labour, T&P etc. Complete at MPS |
| 33 | Provision of Iron Gate with Pillars of size 3.6m wide as per direction of Engineer-in-charge. |
| 34 | Supply of all materials, labour, T&P etc and construction of R.C.C. Sump / CWR of following capacities (KL) with M.S. ladder outside & inside of the tank, M.S.M.H. cover with locking arrangement, cowl, outlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting with approved water proofing (apex) / enamal paint, testing, filling water for testing purpose etc. including supply of verticalpipes and specials, assuming bearing capacity as 8MT/M2 . |
| 35 | 7.5 KL |
| 36 | 10.00 KL |
| 37 | Supply and instalation of 25 Ltr M.S.Bucket type Chlorinator with glass wooling complete over CWR. |
| 38 | Supply & Fixing an Iron Board and Printing on it as well as writing the details of Work on it. |
| 39 | Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing offerrule including tapping the main, but excluding the cost of earth work and cost of all materials. |
| 40 | Providing and fixing brass ferrule 15mm dia. nominal bore for domestic connections. |
| 41 | Providing and fixing of Brass bib cock of approved quality |
| 42 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces two coats & letter writing as instructed by site-in-charge |
| 43 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4(1Cement:2coarsesand : 4gradedstone aggregate 20 mm nominal size). |
| 44 | Providing and laying in position cement concrete of specified grade in 1:4:8(1Cement:4coarsesand:8gradedstone aggregate 40 mm nominal size). |
| 45 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD specifications. |
| 46 | Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specification. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
