Tehri Hydro Development Corporation Limited has published Tender For Annual Rate Contract (Amc) For Civil Work At Aambag, Pashulok Thdcil, Rishikesh.. Submission Date for this Tender is 09-02-2023. Civil Work Tenders in rishikesh Uttarakhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50metres lead. |
2 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete,including disposal of rubbish to the dumping ground within 50 metreslead : With cement mortar 1:4 (1cement: 4 coarse sand) |
3 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm |
4 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work- two or morecoats |
5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :old work - One or more coats |
6 | Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
7 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) Nondecorative type, core of block board construction with frameof 1st class hard wood and well matched teak 3 ply veneering with verticalgrains or cross bands and face veneers on both faces of shutters. 35mm thick including ISI marked Stainless Steel butt hingeswith necessary screws |
8 | Providing and fixing fly proof galvanized M.S. wire gauge to windows andclerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.63 mm all completeWith 2nd class teak wood beading 62X19 mm |
9 | Removing of colour/oil bond distemper with sand paper complete. |
10 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) |
11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in :6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) |
12 | Earth work in excavation by mechanical means (Hydraulicexcavator)/ manual means over areas (exceeding 30cm in depth. 1.5 m in widthas well as 10 sqm on plan) including dosposal of excavated earth,lead upto 50m and lift upto 1.5m,disposed earth to be levelled andneatly dressed.All kinds of soil |
13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : ( A) 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size ) |
14 | Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent ordyed to required colour or shade, with nuts and screws etc. complete250x16 mm |
15 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm |
16 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade, with necessary screws etc. complete100 mm |
17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) andjointing with grey cement slurry @ 3.3kg per sqm, including pointingin white cement mixed with pigment of matching shade complete |
18 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matchingpigment etc, complete. |
19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
20 | P/laying Kota stone Flooring 20 mm thick average thick base laid over jointed with gray cement in cement mortar 1:4 ( 1cement : 4 sand ) 25 mm thick |
21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketedpipes. 75 mm diameter metre |
22 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixturescomplete. 10 litre capacity - White |
23 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
24 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anticorrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore metre (for Internal work) (A) 15 mm dia nominal bore |
25 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore each |
26 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
27 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm witha pair of 15 mm C.P. brass pillar taps |
28 | P/making of double scafolding with coupler system or MS pipe with breacing i/c removal of form work complete. |
29 | P/Fixing of dash fastner 10x160 mm for door/window frame. |
30 | Providing and fixing solid plastic seat with lid for pedestal type WC sheet : (a) 15 mm nominal bore |
31 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete :(a) 15 mm nominal bore |
32 | Providing and fixing C.P. brass long nose bib cock of approved qualityconforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
33 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
34 | Providing and fixing C.P. brass angle valve for basin mixer and geyer points of approved quality conforming to IS:8931 :15 mm nominal bore |
35 | Providing and fixing PTMT pillar cock of approved quality and colour . 15 mm nominal bore, 107 mm long, weighing not less than110 gms |
36 | Diluting and injectingchemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. |
37 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement morter 1:2 (1 cemenet :2 Coarse sand ) to match the existing floor: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. |
38 | Supplying chemical emulsion in sealed containers including delivery aschlorpyriphos/Lindane emulsifiable concentrate of 20% specified |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail