Tender For Under The Deposit Item, The Improvement Work Of The Road In Bhimtal Sidkul Bypass Motor Road By Interlocking Concrete Block Pavements, Dbm And Bc Bhimtal Bypass Moter Road In Km 2.500 To Sh 10 Km 19 Hec 4 To 6
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jan 2023
0 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhowali → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Under The Deposit Item, The Improvement Work Of The Road In Bhimtal Sidkul Bypass Motor Road By Interlocking Concrete Block Pavements, Dbm And Bc Bhimtal Bypass Moter Road In Km 2.500 To Sh 10 Km 19 Hec 4 To 6
BOQ
| Sl. No. | Item Description |
| 1 | Tack coat using VG-10 grade bitumen Over normal bituminous surfaces @0.35kg/sqm MIS 3-1-1, |
| 2 | Providing and laying Dense Bituminous Macadam with 100-120 TPHbatch type HMP producing an average output of 75 tonnes per hourusing crushed aggregates of specified grading, premixed with bituminousbinder @ 4.25% by weight of total mix of mix and filler, transporting thehot mix to work site, laying with a hydrostatic paver finisher with sensorcontrol to the required grade, level and alignment, rolling with smoothwheeled, vibratory and tandem rollers to achieve the desired compactionas per MoRTHspecification clause No. 507 complete in all respects. Grading II - 26.5mm nominal size) (MIS- 3-3-2) |
| 3 | Providing and laying Bituminous Concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respectsfor Grading-I (bituminous binder @ 5.2 % of mix ) MIS 3-4-1 |
| 4 | Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. P.C.C grade M 10. Nominal mix 1:3:6 (MORD 11-4-1-1) |
| 5 | Providing and Laying of Interlocking Concrete Block Pavements of M-35 Grade having thickness 80 mm as per drawings and Technical Specification Clause 1504.(MORD 6-7-1 ) |
| 6 | Providing and Laying of Interlocking Concrete Blcok Pavements having thickness 60 mm as per drawing and Technical Specification Clause 1504. (MORD 6-7-2) |
| 7 | Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. (MISC 5-10) |
| 8 | Providing and fixing Bi-directional Road Studs (Cat Eye) / Reflective Pavement Marker (RPM) with single body twin shank and plastic body moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (Hi-impact Polystyrene) or ABS (Acrylonitrile Butadiene Styrene) or any other suitable material approved by Engineer in charge (Marker must support a load of 13635 kg tested in accordance with ASTM D 4280 and Reflective lenses conforming to ASTM D 788 or equivalent) bonded or anchored within the road surface for lane marking and delineation for night time visibility as per Clause No. 1707 of MORD and 804 of MORTH specifications. The RPM must have reflective panels with micro prismatic lens where area of each retro reflective surface shall not be less than (MISC 5-2) |
| 9 | Clearing Grass and Removal of RubbishClearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per Technical Specification Clause 201. (By Manual Means) MORD 2-1 |
| 10 | Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction |
AI Tender Summary
Tender Timeline
Jan 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender