Tender For Maintenance Of Ganesh Garden Kota(5 Years Oandm)
Tender Value
11.79 Crore
Estimated cost
Bid Submission
30 Jan 2023
0 days left
EMD
23.58 Lakhs
Bank guarantee accepted
Document Fee
7500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kota → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Maintenance Of Ganesh Garden Kota ( 5 Years Oandm )
BOQ
| Sl. No. | Item Description |
| 1 | Part - \"A\" Maintainance Work |
| 2 | Uprooting weeds from the lawn plots and trenches area after 10 to 15 days of its flooding with water inlcuding disposal of uprooted vegetion |
| 3 | Moving manually / with power machines |
| 4 | (b) with power machine |
| 5 | Maintenance of shrubbery or hedges cutting including disposal of rubbish with all leads and lifts |
| 6 | Sweeping / cleaning of gardens roads lawns paths and disposal of all rubbish |
| 7 | Maintenace of Plants by the contractor including of pits/bids watering preparation of Thavala Hoeing weeding etc. & application of insecticides etc. & security if the plant die during maintenance contractor has to replace same height plant at his own cost. |
| 8 | Security of the garden per gate for 24 hours in 3 shift with the exilitary persons |
| 9 | Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. Good soil of earth |
| 10 | Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately). |
| 11 | Supply of dry manure including loading unloading,transportation & stacking at site. |
| 12 | Farm yard manure(organic) |
| 13 | Compost |
| 14 | Goat dungmanure. |
| 15 | Neemcack |
| 16 | Supply of Chemical Fertilizers at store in bags weighing not less than 50 kg each including loading unloading & transportation |
| 17 | Urea |
| 18 | DAP |
| 19 | Super Phosphate |
| 20 | Murrate of Photash |
| 21 | Calcium Nitrate |
| 22 | Supply of insecticides & Pesticides at store in dust/liquid form complete. |
| 23 | Methyl Prathion 2% |
| 24 | Karathion (Liquid) |
| 25 | Metacid(Liquid) |
| 26 | Rogor(Liquid) |
| 27 | Cholorophyriphos 20 Ec. |
| 28 | Bauiston 50% |
| 29 | Renovating lawns including weeding cheepingthe grass forking the ground top dressing with manure . Mixing the same with forked soil watering maintaining the lawn for 30 days for till the grass forms a thick lawns free from weeds and fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost |
| 30 | Supply of different varieties of rose plants in poly bag/ earthen pot according to height growth and age of the plant at site including loading unloading and transportation etc. complete |
| 31 | Desi rose / root stock plant |
| 32 | Ganganagari rose plant in poly beg |
| 33 | Different varieties of grafted rose plants in poly pot/earthen pot |
| 34 | Supply of different varieties of bougainvillea in ply bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete |
| 35 | Different varieties of bougainvillea 900mm |
| 36 | Supply of different varieties of indoor plantsin poly bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete |
| 37 | Selective varieties of crotons3 feet |
| 38 | Supply of different varieties of palms in poly bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete |
| 39 | Arica palm many branches 6 feet |
| 40 | Supply of different varities of tree/shrubs/climbers according to height and age of the plant at side including loading/unloading & transportation etc.complete |
| 41 | Different flowering plants 1500mm |
| 42 | Different varieties of shrubs 900 mm |
| 43 | Different varieties of climbers 1500 mm |
| 44 | Laying of lawns including ploughing levelingbreaking of clods manuring and removal of stones etc. (cost of manure or extra good earth to be paid separately )maintenance of lawn foe 30 days or more till the grass forms a thick lawns free from weeds and fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost |
| 45 | in rows 5 cmapart in either direction |
| 46 | Prunning & trumming and cutting of old big trees on the road side The contractor will deposit the cut wood in the Deptt. |
| 47 | Part - \"B\" Civil Work |
| 48 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 49 | M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). |
| 50 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: |
| 51 | Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 52 | Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in : |
| 53 | Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 54 | Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish : |
| 55 | 25 mm thick |
| 56 | Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . |
| 57 | 75mm thick. |
| 58 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 59 | Extra if square,rectangular hollow tubelarsections are used or grill made by flats only |
| 60 | Pointingonstonemasonryincementsandmortar 1:3 (1 cement : 3 sand) : |
| 61 | Raised and cut pointing. |
| 62 | Providing and fixing M.S. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint |
| 63 | S & F CC 1:2:4 precast kerb stone on dand upto 60 cm length over 20 mm thick base of cement mortar 1:6 including jointing earthwork,painting and jointing with cement mortar 1:4 of size 15 x 40 cm |
| 64 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 65 | M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size). |
| 66 | Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect including scaffolding and safety provision |
| 67 | New Work |
| 68 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: |
| 69 | Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. |
| 70 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shadetogive an even shade including all scaffolding: |
| 71 | New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 72 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : |
| 73 | Two or more coats on new work |
| 74 | One or more coats on old work. |
| 75 | Part - \"C\" Road Work |
| 76 | Providing and laying Reinforced cement concrete pipes NP-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (MoRTH specification : clause 1000/2900). |
| 77 | 300 mm dia |
| 78 | Direction and Place Identification Signs upto 0.9 sqm Size Board.. Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing |
| 79 | Part - \"D\" Sanitary Work |
| 80 | P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in-charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : |
| 81 | P& F waste Pipe with all fittingP.V.C with PVC nut 32 mm |
| 82 | P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make: |
| 83 | C.P. Pillar cock, 15 mm dia nominal bore |
| 84 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: |
| 85 | Brass 400 gm,15mm nominal bore. |
| 86 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. |
| 87 | 160 mm dia |
| 88 | P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : |
| 89 | (-do-) wt.Not less than 600 gm, 25mm. |
| 90 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) |
| 91 | 20mm nominal size |
| 92 | 25 mm nominal size |
| 93 | 32mm nominal size |
| 94 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: |
| 95 | Size 530x410mm. |
| 96 | P. & F Squatting Pan (Indian type) white glazed vitreous china 1st quality W.C. Pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest.) |
| 97 | Size 450mm. |
| 98 | P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 99 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. |
| 100 | Flat Back (large) or half stall size 610x400x80mm. |
| 101 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : |
| 102 | Size 580 mm x 450 mm |
| 103 | P & F C.P. Brass flush Valve with C.P. flush bend of approved make. |
| 104 | Concealed type for 115 mm thick wall |
| 105 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. |
| 106 | with 37 cm long pipe and nut. |
| 107 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: |
| 108 | 500 litres capacity. |
| 109 | 1000 litres capacity. |
| 110 | Part - \"E\" Tubewell Work |
| 111 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casingpipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: |
| 112 | 200 mm dia Nominal bore. |
| 113 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work. |
| 114 | 200 mm Nominal bore of pipe |
| 115 | S & F tube well cover ofM.S.sheet (6mm thick) with nuts and bolts complete for casing size: |
| 116 | 200mm dia |
| 117 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. |
| 118 | Testing verticality of tube-well by plumbing system and yield test and draw down test by pumping system as per IS: 2800 (Part II) 1979. |
| 119 | Installation of submersible motor pump set in Tube-well/open well complete ( labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose. |
| 120 | Part - \"F\" Electric Work |
| 121 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it\"sISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 122 | Short point (up to 3 mtr.) |
| 123 | Medium point (up to 6 mtr.) |
| 124 | Long point(up to 10 mtr.) |
| 125 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 126 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 127 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 128 | SITC of Radial / mixed flow ISI marked water and anti-corrosive liquid filled submersible motor pump setssuitable for 100/150mm dia borewell.The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034 : 2018 and IS: 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008,& IS12615:2011with required accessories including making connection suitable for Bore well. The job includes labour part of lowering ofriser pipe G.I./H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. OEM shall have submitNABL / CPRI / ERDA accrediatedlab type test certificate before execution. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 129 | 100 mm diameter Submersible pump shall have following HP Rating, phase, Head range, Discharge range respectively. |
| 130 | 5.0 HP, 1-Ø, (56 - 236)Mtr, (90 - 25) LPM Copper wound |
| 131 | 150 mm diameter Submersible pump shall havefollowing HP Rating, phase, Head range, Discharge range respectively. |
| 132 | 10.0 HP, 3-Ø, (91 - 115)Mtr, (285-180) LPM |
| 133 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen freefor less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 134 | 6.0 Sq.mm 3 core flat / Round |
| 135 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-ArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolyticaluminium conductor confirming to IS 8130 of purity >99.6 %,Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) includingtesting etc. as required of following size. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 136 | 10.0 Sq. mm 4 core |
| 137 | 16.0 Sq. mm 4 core |
| 138 | 25.0 Sq. mm 3.5 core |
| 139 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 140 | Single pole MCB (With B/C curve tripping Characteristics) |
| 141 | 6 A to 32 A rating |
| 142 | 50/63 Arating |
| 143 | Providing & Fixing ofIK08 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles,of high power LED of 3 to 5 watt each . Integrated potted driver as a unique BIS R numberhaving efficiency more than 85 % and in compliance to BIS certified and Trade markcertificate. The System level Luminaire efficacy >=125 lm/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10%, driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector , Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K±355K.Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities forLED fixtures.(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 144 | High Power LED Flood Light Minimum lumen output 14800 lm |
| 145 | High Power LED Flood Light Minimum lumen output 30000 lm |
| 146 | High Power LED Flood Light Minimum lumen output 43750 lm |
| 147 | Providing & Fixing of HDPE pipe Confirming to IS:4984:2021for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 148 | for vertical installation |
| 149 | 50 mm OD6 kg / cm2 |
| 150 | 63 mm OD6 kg / cm2 |
| 151 | SITC of ContactorOEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart andmade out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFFpush buttons,ammeter, voltmeter, indicating lamps etc.suitable for following rating motors complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 152 | For Three phase Submersible / Mono block pump |
| 153 | 3.0 HP to 5.0 HP ( Star / Delta starter ) |
| 154 | 7.5 HP to 10.0 HP( Star / Delta starter ) |
| 155 | UIT Approved Items |
| 156 | P & F Stone cladding/Flooring works dressed bansi paharpur stone 25mm thick in traditional style used in cladding/Flooring with pattern over 25 to 50 mm thick base in CM 1:6 including pointing with cement mortar 1:2 (cement : 2 stone dust) matche the shade of stone with joint thickness upto 1.5mm as per direction of engineer-in-charge. |
| 157 | Providing and fixing combination stone flooring for pathways having both edges of border 20 mm black Kadappa stone of size 825 mm x 400 mm, laid in 20mm thick cement mortar 1:4 as per approved Drawingincluding centre part of path having shahbad brown antique finish of size 400 mm x 400 mm & in centre longitudinal every fourth stone of black kadappa of size 400 mm x 400 mm having fine finish jointing with white cement using pigments to match the stone shade etc. complete in all respect as per drawing design & specifications and as per direction of Engineer-in-charge |
| 158 | P/F 25 mm thick polished Black Kaddapa stone dasa with gola in 125 mm wide strip for base of cladding of Shahbad Gold tiles in Trellis, laid over 20 mm thick base of CM 1:4 including making gola, raking & finishing of joints to match the colour of stone etc complete in all respect & as directed by Engineer-in-charge. |
| 159 | Single piece of stone element with carving work in Bansi Paharpur stone includes stone pillar, stone base, todies and thabi etc carving work as per direction of engineer in charge |
| 160 | Construction of Jogging work on existing track using clay sand mix (design as approved by Rajasthan sports council) including grinding of clay and mixing by mechanical means preparation of bed. Laying clay mix mechanically (hydraulic system) and compacting using roller making surface leveled and even including cost of water hire charges all T&P complete in all respect as per direction of Engineer in charge. |
| 161 | Supply & Plantation of selected specimen plants including mortality replacement, loading - unloading transportation and maintenance for 30 days after planting the plants (as per scope of work for Horticulture) |
| 162 | 1.Preparation of soil including cleaning & removing of unwanted shrubs removal ofstones & garbage. |
| 163 | 2.Supply of dry manure (Farm yard manure organic) |
| 164 | 3.Supply of Insecticides. |
| 165 | 4.Digging of pits size 60x60x60 cms. Including removal of stones, Manuring application of insecticides & watering at least 15 liter per plant after planting. |
| 166 | 5.Watering to plants. |
| 167 | 6. Maintenance of plants by the contractor including pits, preparation of Thavala Hoeing weeding etc. & application of insecticides etc. & security. If the plant die during maintenance contractor has to replace same height plant at his own cost. |
| 168 | Cycus revolata 3\"-4\" DiaCycus circinalis4\"-5\" DiaFurcraea gigantia 3\"-4\" DiaJuniprus chinensis 5\"-6\" heightPhoenix roebilinii 2\"-3\" ht dia 3\"-4\"Phoenix roebilinii 5\"-6\" heightPhoenix dactylifera 12\"-15\" heightRoystonea venezuelana 10\"-12\" heightLatania loddigesii 5\"-6\" heightBismarckia nobilis 5\"-6\" heightWashintonia filifera 5\"-6\" heightWodyetia bifurcata 10\"-15\" height (Foxtail Palm)Arica Palm 10\"-15\" heightRhapis Palm 4\"-5\" heightGreen vulgaris Palm 10\"-15\" heightFicus prestige 3\"-4\" heightFicus king bush 3\"-4\" heightFicus nuda 4\"-5\" heightFicus Panda topiary dia 3\"-4\" heightFicus Black Prince 3\"-4\" topiary heightFicus Starlight 4\"-5\" heightFicus benjamina 12\"-15\" heightPlumeria Alba 10\"-12\" heightPlumeria Singapore 4\"-5\" heightFicus Nitida Topiary 7\"-8\" heightTrimnelia 12\"-15\" heightBougainvellea Topiary 3\"-4\" heightSchefflera actinophylla 10\"-12\" height (Umbrella tree)Mangifera indica 8\"-10\" height (Mango tree)Bayan Tree 12\"-15\" height (Bargad)Polyalthia longifolia 10\"-12\" height (Ashok)Calophyllum inophyllum 10\"-12\" height(Sultan Champa)Liriodendron 10\"-12\" height (Tulip Tree)Magnolia champaca 5\"-6\" height (Golden Champa)Melaleuca bracteata 5\"-6\"height Topiary (Bottle Brush)Juniperus chinensis 5\"-6\"heightThuja compacta 5\"-6\" height (Mor Pankhi) |
| 169 | Supply and plantation of selected shrubs including mortality replacement, loading-unloading transportation and maintenance for 30 days after planting |
| 170 | Acalypha ceylon 3\"-4\" |
| 171 | Cassia biflora 3\"-4\" |
| 172 | Ticoma gaudichaudi 3\"-4\" |
| 173 | Nerium oleandar 3\"4\" |
| 174 | Supply and plantation of Ground Covers including mortality replacement, loading- unloading transportation and maintenance for 60 days after planting the plants. (atleast 25 plants per sqm) as per direction of engineer-in-charge |
| 175 | Repair& maintenance of whole irrigation system Includding Watering garden, pop-up, sprinkler pipe line, valve tube well including replacement of pipe, pop-up, sprinkler,valve repairing of submersible pump and electric work of tubewell all respect and as per direction of Engineer-in-charge etc. 32000 x 60 = 1920000 Rmt |
| 176 | Repair & maintenance of water cooler including replacement of all type of parts,electric work , gus filling andas per requirement, as per direction of engineer-in-charge. |
| 177 | Sprinkling of water on jogging track, every day on full length of jogging track as per direction of engineer-in-charge. |
| 178 | Crape Myrtal /Hemelia /Lantana Selloviana /Lantana Yellow /Rukmani /Gaudichaudi |
| 179 | Jade Plant /Aclypha Tricolor /Kaner Dwarf /Copper Plant /Gudhal /Chandni/ Kamini Muraya /Callindra Pink Off. |
| 180 | Pedilanthus /Laila Majnu |
| 181 | Providing and supplying of Garden bench (Victorian) at site both side of garden bench is made of cast iron having back height of 720 mm and seating height of 390 mm (approx.) it may vary at some places and both side of Garden bench is connected with 10 Nos. MS tube of rectangular section size 65×25×3mm having length of 1520 mm for seating purpose with extra support 25×5 mm MS flat for extra stability. All sharp and rough edges of bench is to be grinded with grinder and all fill up with m-seal, and fixed at required position and this bench is having the provision of hold & fast system weight not less than 95Kg(for grouting) bench is complete with a coat of 1st class red oxide and with three coats of synthetic enamel of 1st class quality paint in green colour finally bench is assembled with nuts and fixing at the site complete with the direction of E-I-C. |
| 182 | Providing& fixing of Gear Driven Rain gun sprinkler, grillo (Ajay (Indra)/Rain Bird/Premier-Full/ Part circle) with oscillating arm having radius of 41m and flow of 617lpm at an operative pressure of 5 kg/cm.sq, having 11/2\" inlet. The body of sprinkler is made of aluminium alloy duty protected in its main parts by brass stainless steel and techno polymers. The sprinkler is equipped with Jet breaker and four different nozzles. |
| 183 | Providing and fixing of self closing spring loaded quick coupling 3/4\" hydrant (Drip\"n\"Drip /Whethermetic/ Premier); made of Aluminium alloy doly procted ints main parts by brass stainless steel and techno polymors & having self closing thermoplastic hinged lid, anti rotating device and with requirew no. of 3/4\" key for quick coupling hydrant made up of Aluminium alloy ;doly procted. An electro galvanized MS saddle with 3/4\" G.I Riser with galvanized nut & bolts and parallel female thread (pressure tight) shall be used to connect the quick coupling hydrant to the pipeline. |
| 184 | Providing & Fixing of anti skid high strength, high finish, coloured Tile/Interlocking flooring having thickness 60 mm over prepared surface with base of 25 mm thick cement and mortar 1:4 as per approved colour, design & drawing including all erspect complete. (the design of paving blocks shall be decided by Engineer-in-charge) |
| 185 | tulqfo/kkvksa dh lkQ lQkbZ dk dk;Z laosnd }kjk lQkbZ gsrq vko\";d lkeku tSls >kM+w] fQukbZy] dhVuk\"kd nokbZ bR;knh dh O;oLFkk vius Lrj ij djuh gksxh foHkkx }kjk vyx ls dksbZ Hkqxrku ns;h ugh gksxk A |
| 186 | Providing & making artistic/heritage painting with the using oil paint/apex ultima or equivalent exterior paint having anti algal and dust pick up resistance with finish as per direction of Engineer in charge on wall faces/panels etc. with approved colour in following patterns including painting base works of required exterior paint in approved quality/brand:-The Painting shall be based on themes related to flora & fauna like creepers flower pots, animals, birds & natural figures. As the work shall be at the level of similar to enclosed drawing ‘C’. |
| 187 | Regular, Operation, Security and Maintenance with material of existing different type of lightsincluding all panels, MCCB/MCB’s, Submersible Pump Panel, LT Cables at Ganesh Udhyan Park, Kota including material required for replacement/repair at the cost of contractor complete in all respect. |
| 188 | Phase I |
| 189 | Phase II |
| 190 | Regular Operation in Security & maintenance with Material of Ganesh Udhyan Fountain including following operations1. Maintain the power supply from L.T. Line to meter panal to fountain panel to lights and motor. 2 Replacement / Maintenance of damage cable / wire of any. 3 Replacement of damage MCB/ Main Switch of fountain panel of any rating4. Repair / Rewiding of damage motor 5. Repair / Replacement of damage nozzles with similar one and pipes and any other material used in foundation for operation. 6 Cleaning of water sink / tank of fountain. 7. Repair / |
| 191 | Mainteance of various lights of fountatin including material required for Replacement / Repair at the cost of contractor complete in all respect. |
| 192 | Supply&layingofcarpetgrassincludinglevelling, cleaning,mixingofmanure,removalofunwanted shrubs etc. maintenance up to first lawn mowing. |
AI Tender Summary
Tender Timeline
Jan 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 30, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender