}

Supply And Delivery Of Spare Parts And Chemicals For Repairing And Renovation Of Wtp Unit Of R.O. Based Fully Automatic Drinking Water Bottling Plant At Dariapur Wtp Complex In The District Of Malda, Under Malda Mechanical Division P.H.E .Dte., malda-West Bengal

Public Health Engineering Department-PHED has published Supply And Delivery Of Spare Parts And Chemicals For Repairing And Renovation Of Wtp Unit Of R.O. Based Fully Automatic Drinking Water Bottling Plant At Dariapur Wtp Complex In The District Of Malda, Under Malda Mechanical Division P.H.E .Dte.. Submission Date for this Tender is 24-01-2023. Spare Part Tenders in malda West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

35671148
Supply And Delivery Of Spare Parts And Chemicals For Repairing And Renovation Of Wtp Unit Of R.O. Based Fully Automatic Drinking Water Bottling Plant At Dariapur Wtp Complex In The District Of Malda, Under Malda Mechanical Division P.H.E .Dte.
Open Tender
Indian
West Bengal
malda
24-01-2023

Tender Details

Supply And Delivery Of Spare Parts And Chemicals For Repairing And Renovation Of Wtp Unit Of R.O. Based Fully Automatic Drinking Water Bottling Plant At Dariapur Wtp Complex In The District Of Malda, Under Malda Mechanical Division P.H.E .Dte.-2 Filter Media 3 Gravels ( 40 Kg / Bag ) 4 Filtering Sand ( 40 Kg / Bag ) 5 Treated Sand ( 40 Kg / Bag ) 6 Activated Carbon 7 Anthracite 8 Cartridge Filter 9 5 Micron 20 Long ( Jumbo Wound Type ) 10 6 Micron 20 Long ( Slim Wound Type ) 11 0.1 Micron 20 Long ( Spun Cartridge ) 12 0.2 Micron 20 Long ( Pleated Cartridge ) 13 Supply, Delivery Of Membrane Element For Ro Unit, Suitable Forinstallation In Ro Vessel Diameter As Per Following Specification:-A ) Permeate Flow: - Minimum 10000 Gpdb ) Configuration : - Spiral Woundc ) Membrane Polymer:- Composite Polyamided ) Nominal Membrane Area:- Minimum 365 Ft2 ( 33.9M2 ) E ) Maximum Applied Pressure:- Above 450 Psif ) Maximum Operation Temperature :- Not Above 122°F ( 50°C ) G ) Ph Range, Continuous ( Cleaning ) :- 2-11 ( 1-13 ) *H ) Maximum Feed Water Turbidity :- Upto 1.0 Ntui ) Maximum Feed Water Sdi ( 15 Mins ) :- Upto 5.0J ) Maximum Feed Flow:- 75 Gpm ( 17.0 M3 / H ) K ) Minimum Ratio Of Concentrate To Permeate Flow Any Element:- 5.1L ) Maximum Pressure Drop For Each Element:-10 Psi 14 Spare Parts 15 Dosing Pump 16 1 / 4 Pestro Fittings 17 1 / 4 Pestro Pipes 18 Lateral Distribution Systems 19 Silicon Gasket 20 1.5 ( Small ) 21 1.5 22 2.5 23 2 Multiport Valve 24 Ozone Cell For 500 / 1000 Ml Plant 25 6 Mm Dozing Pipe ( Teflon ) 26 Chemicals 27 Ro Antiscalant Flowmax-2222 28 Sodium Hypochlorite 29 Making Arrangement For Deploying Service Engineer With All Incidental Charges For Replacement Of All The Supplied Spare Parts And Chemical As In Sl. No. 1.00 To 6.00 And Commissioing Of The Water Tretment Area All Complete As Per Direction Of Eic. 30 Make As Per Departmental Approved Vendor List Circulated Vide Memo No.Phe / Iv / 2277 / W-181 / 19 Dated- 25 / 09 / 2019 31 Add Gst @18% 32 Add Cess @1%

Key Value

Document Fees
Refer document
EMD
INR 21917.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Supply and delivery of spare parts and chemicals for Repairing and renovation of WTP unit ofR.O. based fully automatic drinking water bottling plant at Dariapur WTP Complex in the district of Malda, under Malda Mechanical Division P.H.E .Dte.
Sl. No. Item Description
1Supply and Delivery of following materials at site.
2FILTER MEDIA
3Gravels (40 Kg/bag)
4Filtering Sand (40 Kg/bag)
5Treated Sand (40 Kg/bag)
6Activated Carbon
7Anthracite
8CARTRIDGE FILTER
95 micron 20" long (Jumbo Wound type)
106 micron 20" long (Slim Wound type)
110.1 micron 20" long (Spun Cartridge)
120.2 micron 20" long (Pleated Cartridge)
13Supply, delivery of Membrane element for RO unit, Suitable for installation in RO vessel diameter as per following specification:- a)Permeate Flow: - Minimum 10000 gpd b) Configuration : - Spiral wound c) Membrane polymer:- Composite Polyamide d) Nominal membrane Area:- Minimum 365 ft2 (33.9m2) e) Maximum applied pressure:- above 450 psi f) Maximum operation temperature :- Not above 122°F (50°C) g) pH range, continuous (Cleaning) :- 2-11 (1-13)* h) Maximum Feed water Turbidity :- Upto 1.0 NTU i) Maximum Feed water SDI (15 mins) :- Upto 5.0 j) Maximum Feed Flow:- 75 GPM (17.0 m3 /h ) k) Minimum Ratio of Concentrate to permeate Flow any Element:- 5.1 l) Maximum pressure drop for Each Element:-10 psi
14SPARE PARTS
15Dosing Pump
161/4"" Pestro fittings
171/4"" Pestro pipes
18Lateral distribution systems
19SILICON GASKET
201.5 " (Small)
211.5 "
222.5 "
232 " Multiport Valve
24Ozone cell for 500/1000 ml Plant
256 mm Dozing pipe (Teflon)
26CHEMICALS
27RO antiscalant flowmax-2222
28Sodium Hypochlorite
29Making arrangement for deploying Service engineer with all incidental charges for replacement of all the supplied spare parts and chemical as in sl. No. 1.00 to 6.00 and commissioing of the Water Tretment Area all complete as per direction of EIC.
30MAKE AS PER DEPARTMENTAL APPROVED VENDOR LIST CIRCULATED VIDE MEMO NO.PHE/IV/2277/W-181/19 DATED- 25/09/2019
31Add GST @18%
32Add Cess @1%
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail