}

Bids Are Invited For Lime Dosing System For Ntpc Korba Tpp Fgdtotal Quantity : 139, Korba-Chhattisgarh

Department Of Heavy Industry has published Bids Are Invited For Lime Dosing System For Ntpc Korba Tpp Fgdtotal Quantity : 139. Submission Date for this Tender is 11-01-2023. Raw Materials Processing Machinery Tenders in Korba Chhattisgarh. Bidders can get complete Tender details and download the document.




Tender Notice

35668822
Bids Are Invited For Lime Dosing System For Ntpc Korba Tpp Fgdtotal Quantity : 139
Open Tender
Indian
Chhattisgarh
Korba
11-01-2023

Tender Details

Bids Are Invited For Main Supply --1 Surge Hopper 2 Vibrating Feeder 3 Continuous Discharge Twin Feed Type Bucket Elevator With Standard Components Like Buckets, Belt, Drive / Tail Pulleys With Shaft & Bearing Assemblies, Middle / Top / Bottom Casings, Take Up Unit, Drive Base Frame, Drive Unit- Geared Motor ( Ie3 ) , Chain For Final Power Transmission, Zero Speed Switch, Complete Along With All Accessories, 2-Way ( Motorised ) Diverter Flap Gate, Interconnecting Flanges / Chutes, Hardwares & Gaskets. 4 Lime Silos ( Ms With Ss 304 Lining On Conical Portion ) Complete With Supporting Steel Structure, Platforms, Ladders, Railings, Level Switches, Air Relief Devices, Aeration Pads / Flexible Vibro Pads / Electro-Magnetic Vibrators ( For Conical Portion Of Silo ) Along With All Accessories, Interconnecting Flanges / Chutes, Hardwares & Gaskets. 5 Self-Cleaning Bag Filter System Of Suitable Capacity Along With Blowers, Automatic / On-Load Cleaning System. 6 Manual Knife Gates Along With Interconnecting Flanges, Hardwares & Gaskets. 7 Motorized Knife Gates Along With Accessories, Interconnecting Flanges, Hardwares & Gaskets. 8 Rotary Vane Feeders / Rotary Air Lock Feeders ( Moc –Stainless Steel ) Along With Motor ( Ie3 ) , Interconnecting Flanges, Hardwares & Gaskets. 9 Screw Conveyors Complete With Screw Flight With Pipe, Trough, End Plates, Inlet / Outlet Standard Chutes, End Shafts With Bearings & Plumber Blocks, Drive Base Frame, Dust Seals, Drive Geared Motor ( Ie3 ) , Output Coupling, Zero Speed Switch, With Interconnecting Flanges, Hardwares & Gaskets Along With All Accessories. 10 Neutralisation Tanks ( Msrl ) With Ss Dissolving Basket, Drain, Manholes And All Necessary Arrgt. / Nozzles. 11 Agitators Of Ss Construction With Motor / Reduction Gear And Its Mounting Arrangement. 12 Lime Slurry Dosing Pumps Alongwith Motor ( Ie3 ) 13 Complete Interconnected Piping ( Slurry, Air And Water Pipes ) Along With Valves, Rubber Lining Wherever Aplicable, Supports, Gaskets, Fasteners And Accessories Which Is Integral To Lime Feeding Or Dosing System-Process Water Piping From Tp Outside Building To Neutralisation Tanks Along With Overflow And Drain Piping Of Tanks, Back-Flushing Pipeline Along With Valves, Fittings. 14 Complete Interconnected Piping Slurry, Air And Water Pipes Along With Valves, Rubber Lining Wherever Aplicable, Supports, Gaskets, Fasteners And Accessories Which Is Integral To Lime Feeding Or Dosing System-Lime Slurry Piping From Neutralization Tanks To Dosing Pumps Inlet & From Feeding Or Dosing Pumps Outlet To Waste Water Tank Inlet Along With Re-Circulation Line With All Required Valves, Fittings. 15 Complete Interconnected Piping Slurry, Air And Water Pipes Along With Valves, Rubber Lining Wherever Aplicable, Supports, Gaskets, Fasteners And Accessories Which Is Integral To Lime Feeding Or Dosing System-All Interconnecting Pipe Or Ducts, Valves And All Chutes Instrument Air, Water Line, Slurry Lines 16 Complete Interconnected Piping Slurry, Air And Water Pipes Along With Valves, Rubber Lining Wherever Aplicable, Supports, Gaskets, Fasteners And Accessories Which Is Integral To Lime Feeding Or Dosing System-Instrument Air Piping From Tp Outside Building Upto Equipment Related To The System 17 Supporting Steel Structure, Platforms, Ladders, Railings, And Holdback As Applicable Along With All Accessories And Necessary Hardwares For Complete Lime Feeding Or Dosing System. 18 Complete Instruments Associated With Equipment And Integral Piping As Defined At 13-16 For Lime Feeding Or Dosing System. 19 Special Tools & Tackles Or Erection And Start-Up Or Commissioning Spares 20 Total Lump Sum Prices For Visits -Should Include Travel Expenses To / Fro Site, Visa / Insurance , If Applicable, Intermediary Stay For Supervision Of Assembly, Erection And Commissioning, Trial Run At Site & Taining To O&M Staffs Including Technical Support During Implementation Of Logic & Fat Of Bhel Dcs. 21 Total Lump Sum Prices For Supervision Of Assembly, Erection And Commissioning, Trial Run At Site & Training To O&M Staffs -In Days Including Visit Charges, Local Transportation, Boarding, Lodging & Other Related Exepenses For The Total Scope Defined As Per Bhel Nit & Tender Technical Specification, Amendment & Agreements Till Placement Of Order. 22 Total Lump Sump Price For Successful Conductance Of Performance Guarantee Test And Handover In Flawless Condition Of The Package To The Customer At Site Visit Charges, Local Transportation, Boarding, Lodging & Other Related Exepenses. 23 Total Lump Sump Price For Training Of Employees Of Customer At Manufacturers Works 3 Persons For 2 Days Including Lodging And Boarding 24 Mechanical-Agitators For Neutralisation Tank-Impeller Assembly-1 Lot Is Equal To 1 No Of Each Type 25 Mechanical-Agitators For Neutralisation Tank-Bearing Assembly- 1 Lot Is Equal To 1 Nos Of Each Type 26 Mechanical-Agitators For Neutralisation Tank-Motor - 1 Lot Is Equal To 1 No Of Each Type 27 Mechanical-Agitators For Neutralisation Tank-Belt And Pulley If Applicable- 1 Lot Is Equal To 1 No Of Each Type 28 Mechanical-Agitators For Neutralisation Tank- Gear Box Assembly If Applicable 1 Lot Is Equal To 1 No Of Each Type 29 Mechanical-Agitators For Neutralisation Tank- Agitators Shaft Assembly-1 Lot Is Equal To 1 No. Of Each Type And Size 30 Mechanical-Agitators For Neutralisation Tank- Complete Agitator Assembly- 1 Lot Is Equal To 1 No Of Each Type And Size 31 Mechanical-Slurry Pumps For Dosing Pump- Impeller Assembly- 1 Lot Is Equal To 4 No Of Each Type And Size 32 Mechanical-Slurry Pumps For Dosing Pump-Casing Liners ( Where Replaceable Liners Are Provided ) -1 Lot Is Equal To 1 Set 33 Mechanical-Slurry Pumps For Dosing Pump-Seals-1 Lot Is Equal To 4 Set Of Each Type & Size 34 Mechanical-Slurry Pumps For Dosing Pump-Bearings-1 Lot Is Equal To 1 Nos Of Each Type & Size 35 Mechanical-Slurry Pumps For Dosing Pump-Motor- 1 Lot Is Equal To 1 No Of Each Type & Size 36 Mechanical-Slurry Pumps For Dosing Pump-Gear Box- 1 Lot Is Equal To 1 No. For Each Type And Size Of Pump 37 Mechanical-Slurry Pumps For Dosing Pump-Motor-Pump Coupling 1 Lot Is Equal To 1 No Of Each Type 38 Mechanical-For Integral Piping As Defined In Specification-Slurry Valves- 1 Lot Is Equal To 4 No Of Each Type & Size 39 Mechanical-For Integral Piping As Defined In Specification - Slurry Line Bends 1 Lot Is Equal To 4 No Of Each Type & Size 40 Measuring Instruments-Transmitters Of All Types And Model No. For Measurement Of Pressure, Differential Pressure, Flow, Level, Temp, Etc. ) . This Shall Include Magnetic / Electromagnetic Flow Meter, Mass Flow Meter Also. 1 Lot Is Equal To 10 Percent Or 1 No Of Each Type And Model, Which Ever Is More 41 Measuring Instruments-Process Actuated Switches ( Pressure, Differential Pressure, Flow, Level, Temp ) -1 Lot Is Equal To 10% Or 2 No. Of Each Type And Model, Whichever Is More. 42 Measuring Instruments-Limit Switches ( For Pneumatic And Manual Valves ) -1 Lot Is Equal To 10% Or 2 No. Of Each Type And Model, Whichever Is More. 43 Measuring Instruments-Local Gauges For Pressure, Differential Pressure, Flow, Level, Temp ) -1 Lot Is Equal To 5% Or 1 No. Of Each Type And Model, Whichever Is More. 44 Other Related Control And Instrumentation Systems-Set Of Gaskets / O-Rings / Seals- 01 Lot Is Equal To 200% Of Each Type, Model, Rating And Size 45 Other Related Control And Instrumentation Systems-Filters, Light Source, Sensor, Detector, Etc.-01 Lot Is Equal To 100% Of Each Type, Model And Rating 46 Other Related Control And Instrumentation Systems-Complete Probe With Shield Assembly ( Not Applicable For In Situ-Path ) -01 Lot Is Equal To 1 No. Of Each Type And Model 47 Other Related Control And Instrumentation Systems-Electronic Card Assembly / Pcbs, Moisture / Condensate Monitor, Power Supply Modules-01 Lot Is Equal To 10% Of Each Type, Model And Rating 48 Process Connection Piping ( For Impulse Piping / Tubing And Air Supply Piping As Applicable ) - Valves Of All Types And Models-01 Lot Is Equal To 10% Or 1 No. Of Each Type, Class, Size And Model Whichever Is More. 49 Process Connection Piping ( For Impulse Piping / Tubing And Air Supply Piping As Applicable ) -2 Way, 3Way, 5Way Valve Manifolds-01 Lot Is Equal To 10% Or 1 No. Of Each Type, Class, Size And Model Whichever Is More 50 Process Connection Piping ( For Impulse Piping / Tubing And Air Supply Piping As Applicable ) -Fittings-01 Lot Is Equal To10% Or 1 Packet Of Each Type, Class, Size And Model Whichever Is More. 51 Process Connection Piping ( For Impulse Piping / Tubing And Air Supply Piping As Applicable ) -01 Lot Is Equal Topurge Meters-5% Of Each Model Or 1 No.Whichever Is More. 52 Process Connection Piping ( For Impulse Piping / Tubing And Air Supply Piping As Applicable ) -Filter Regulators-01 Lot Is Equal To20% Of Each Model Or 2 Nos. Whichever Is More. 53 Control Valves, Actuators & Accessories ( For All Modulating Control Valves ) -Pneumatic And Electro-Hydraulic Actuator Assembly-01 Lot Is Equal To 10% Or 1 No. Of Each Type, Model And Rating, Whichever Is More. 54 Control Valves, Actuators & Accessories ( For All Modulating Control Valves ) -Valve Trim ( Including Cage, Plug, Stem, Seat Rings, Guide Bushings Etc. ) -01 Lot Is Equal To 01 Set For Each Type Of Control Valve. 55 Control Valves, Actuators & Accessories ( For All Modulating Control Valves ) -Diaphragms, O’ Rings, Seals Etc. Of All Types Make Etc.- 01 Lot Is Equal To 100% 56 Control Valves, Actuators & Accessories ( For All Modulating Control Valves ) -Pressure Gauges Of All Types, Make, Rating Etc.-01 Lot Is Equal To10% Or 2 Nos. Of Each Type Whichever Is More 57 Control Valves, Actuators & Accessories ( For All Modulating Control Valves ) -Solenoid Valves ( If Applicable ) -01 Lot Is Equal To10% Or 2 Nos. Of Each Type Whichever Is More 58 Control Valves, Actuators & Accessories ( For All Modulating Control Valves ) -Positioner Units ( Complete Unit ) & Accessories ( Link Assembly ) -01 Lot Is Equal To10% Or 1 No. Of Each Type Whichever Is More. 59 Control Valves, Actuators & Accessories ( For All Modulating Control Valves ) -Pneumatic Air-Filter / Regulator Of Each Type, Make Rating Etc.-01 Lot Is Equal To 10% Or 2 Nos., Whichever Is More 60 Control Valves, Actuators & Accessories ( For All Modulating Control Valves ) -Air Lock Relays-01 Lot Is Equal To10% Or 2 Nos. Of Each Type Whichever Is More 61 Pneumatics Isolation / Block Valves, Actuators & Accessories ( For All On / Off Valves ) -Pneumatic Actuator Assembly-01 Lot Is Equal To10% Or 1 No. Of Each Type, Model And Rating, Whichever Is More. 62 Pneumatics Isolation / Block Valves, Actuators & Accessories ( For All On / Off Valves ) -Diaphragms, O’ Rings, Seals Etc. Of All Types Make Etc.-01 Lot Is Equal To100% 63 Pneumatics Isolation / Block Valves, Actuators & Accessories ( For All On / Off Valves ) -Limit Switches ( Complete Unit ) & Accessories ( Link Assembly ) -01 Lot Is Equal To 10% Or 2 Nos., Whichever Is More 64 Pneumatics Isolation / Block Valves, Actuators & Accessories ( For All On / Off Valves ) -Pneumatic Air-Filter / Regulator Of Each Type, Make Rating Etc.-01 Lot Is Equal To10% Or 2 Nos., Whichever Is More 65 Electrical Actuators-Actuators-01 Lot Is Equal To1 No Of Each Type And Rating 66 Electrical Actuators-Electronic Pcb Of All Types-01 Lot Is Equal To10% Of Each Type & Model 67 Electrical Actuators-Absolute Encoder ( Replaceable Part ) -01 Lot Is Equal To5% Of Each Type & Model 68 Electrical Actuators-Electronic Torque Sensor-01 Lot Is Equal To5% Of Each Type & Model Total Quantity : 139

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail