Tender For Construction Of Modern Public Toilet At Madurai Corporation Aringar Anna Maaligai West Side North In Ward No.31
Tender Value
31.42 Lakhs
Estimated cost
Bid Submission
23 Jan 2023
0 days left
EMD
31420
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Modern Public Toilet At Madurai Corporation Aringar Anna Maaligai West Side North In Ward No.31
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation forfoundalion in Hard stiff clay, stifi black cotton, hard red earth, shales munam, gravel,stoney earth and earth mixed wilh small size boulders SS.20B and Sand, silt or olher loose soil, wet sand,or sill not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasling inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete Earthwork ExcavalionFooting |
| 2 | Plinth |
| 3 | Supplying and filling in Foundation and basement with Crushed Stone Sand (M-Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complele complying with standard soecification-- M Sand filling |
| 4 | Plain Cement Concrete 1:4:8 (one cemenl four flne aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, Iaying and labour charges and all incidential charges such as water providing etc., complete as per standard specitication |
| 5 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as columnfootings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying wilh standard specifcation. (Payment for centering shall be given after the concrete is laid |
| 6 | Supplying and erecting centering for sides and sotFits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to cenlre and supported by casurina props of 10cm to13 cm dia spaced at not more than 75 cm centre to centre etc. complete mmplying with the standard specificaiton. (Payment for centering shall be given after theconcrete is laid) - Centerinq 2for plane surfaces such as slab,beam, etc. |
| 7 | For plane surfaces such as reclangular or square RCC columns, sunshades. toD and bottom slab of RCC boxinq. etc. |
| 8 | M-25 CONCRETE - Providing and laying in position, standarised design mix M-25 Grade using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenl of 350K9/m3 and maximum water cemenl ratio of 0.55, jncluding admixture(plasticiser/super plasticiser) in recommended proportions as per lS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.70 cu.m.)940.50K9 of 20mm machine crushed stone jelly and with about (2.80 cu.m.)462.00K9 of 10-12mm machine crushed jelv and with about (4.25 cu.m.l701.25Kg of sand, but excluding cosl of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor/roof slabs wherever neccessary without clambing exlra, etc- complete complying with staodard specification and as directed by lhe departmental officers. the coarse and fine aggregates to be used should comply with the requierments of lS 383-2016. (No separate payment will be made by the department for the exces usage of materials as per design mix.)Basement |
| 9 | Ground floor |
| 10 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and bindinq wire also in all floors. |
| 11 | Brick work in CM 1:5 (one cement & five sand) using ll class ground moulded bricks of size9\"X43l8\"X2 3/4\" including finishing, curing, etc., complete com with standard specificationBasement |
| 12 | Ground Floor |
| 13 | Supplying and filling in founclation andbasement withGood earth in layers of not more than 15cm thick wet rammed watered and compacted etc., complete complying with standard specification.-Basement |
| 14 | Brick partition walls of 10.80cm thickness using best qualily country bricks of size 8-3/4\" x 4.114\" x 2-114\" in Cement Mortall:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 15 | Plastering Work with Cm1:5 (one cement and five sand) 12mm thick 10mm2 , thickin floorsincluding cost andconveyance ofal materilas to sile andlabour charges etc,compiete as per standard specifications IS 1306) |
| 16 | Plasterlngwithcementmortar( 1 :3)10mmthickthickin floorsincluding cost andconveyance ofal materilas to sile andlabour charges etc,compiete as per standard specifications IS 1306) |
| 17 | WhitewashingTwo coats usingfreshlyburntshelllime,inallfloors, includingcostoflimeandothermaterialssuchasbrushes,kanjee, scafoldingchargesetc.Complete. |
| 18 | Painting Two coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete. |
| 19 | Paving the floor with Design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cementAnnexure - IV (Colour) |
| 20 | Finishing the top of Floor with Granite Finish with C.C 1:2:4 (One Cement and Two sand , and four HBG Jelly) using chips of grade 10mm and below of 25mm thickness and rubbed smooth etc completed |
| 21 | Dadooing walls withGlazed tiles of sizes 305mm x 200mm x 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 22 | Solid PVC door shutters using 19 Gauge 19mm MS squaretubes forstyles and outer frames.hmm MS square tubes for top. lock and bottom rails. The steel tubesshallbecoveredwithSmmthicksolidPVC sheets. Shutter using Smm thicksolid PVC sheets foi paneling shall hqiaiyfixed in position including necessaryfurnitureandfittings.Theoverall sizeat styles shall be 50mm x 30mm. The over all size of top rail, Lock nail and bottom rail shall be 75mm x 30mm The overall si2e of framesshall be50mmx 45mm with suitable rebate for housing the shutter and should have provision to fixAL drops, tower bolt hinges and lockplatesinclusive ofcr›stofallmaterialsetc complete complying with thew standard specifications. |
| 23 | UPVC VentilatorSpecification: SupplyingandfixingUPVC(Un- Plasticized Polyvinyl Chloride) Lotivered Ventilators oJ from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles ore reinforced with GI/1mm 125GSM and 1009corrosion free,theprofilearemultichamberedsectionswith wall thickof2mm.TheEPOMrubber(blackcolour) oovered with all over the edges of llama and shutter The corners and joints should be welded and cleaned Radiationspinheadedglass4mmthickshouldbe provided in tile louvers. The windowshould be fixed to thewallwith1009apackingwithscrawsandsilicon packing all round the frames. The vendlator should be got approved from the Executive Engineerbefore use on work. |
| 24 | Manufacturing. Supplying and Fixing of Stainless Steel Handrailsfprstaircaseusing50mmdia304L Grade Stainless Steel pipe of 1.60mm thick at required locatons to a height of 900mm fromfinished floorlevel weldedto38mmdiaStainlessSteelpipe po9t of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediatehori2ontalstainless steel pipeof1.60mmthickin between.Thevertical pipe has to be welded to the 100X100X 6mm MS base plate encased in the base concrete.The rate is inclusive of the chargesfor cutting,bending,welding grinding, polishing, conveyance, electricalcharges etc. complete |
| 25 | Stainless Steel(SalemStainlessSteelyDoorFrame (BoxSectionusingStainlessSleefPlateof1mm thick) of size 100 mm x 60 mm with a rebate of 30/ 35 mmx15mmononesideoftheflameincluding supplyingandfixingdovetailsplayedendstainless steel Hold fast etc.,PWD SOR P NO 158 |
| 26 | Supplying&fixing doorshuddersforMediunDensityFiberBoardofexterior grade 35 mm thick.single leaf conforming to IS:12406/1089with 35x12mmT.W.tippingonall edges withnecessaryadhesivesand CP screwscomplyingwithstandardspeclFicetionC.Therate is induaiveof threeecoatsofdestqualifyvarnishbutexcludingcostoffurniture fittings.suchas 300 mm tower doll2nos,200mrrtTowerboltI no.300mm |
| 27 | PLUMBINGWORKSSupplying and fixing in position besl approved of BIS quality PVC Waste water pipes having a pressure of 6 kg. / sq.cm including cost of special lamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including flnishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the centre of the pipe line in addition to those for more than 6\"0 meter Pipe tength, etc., complete complying with standard specirication.110mm dia pipe |
| 28 | 90mm dia Dipe |
| 29 | Supply and delivery and Iixing of HDPE tank as per lS 12701 / 1996including loading,unloading, transportation and labour charges for fixingof the Gl pipes and specials for pipe connection works including cutting, lhreadino and flxino charoes elc.. (1000 Litre Capacity) |
| 30 | Supptylng and fixing in position flrst quality and approved variely of Gun metal Gate Valve / WheelValve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arangements). The valves lo be used on work shall be got approved by tha Fypcillive Fnoineer before use on work.25mm Gun metal Gale Valve |
| 31 | 32mm Gun metal Gate Valve |
| 32 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever ne@ssary. (Taps should be got approved by lhe Executive Fnoineer be-fore use on the works)SD Tap |
| 33 | Pillar Tap |
| 34 | Supplying, laying and jointing PVC pipes (having working pressure \"10 kg. / sq.cm) of approved quality and besl variety conforming to BIS of the following dia including culting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes onthe wall (or) drilling holes in the roof and making good the dismanlledportion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scatfolding charges, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use o25mm dia |
| 35 | 32mm dia |
| 36 | Supplying, laying and jointing PVC pipes (having working pressure \"10 kg. / sq.cm) of approved quality and best variety conforming to Bls of the following dia including cutting, threading and ,ixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wa[ with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantledportion to original condilion with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges up to 4 meter height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.32mm dia |
| 37 | CouplerSupplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and extemal water supply25mm Dia |
| 38 | 32mm Dia |
| 39 | Elbow25 mm Dia |
| 40 | 32 mm Dia |
| 41 | Bend25 mm Dia |
| 42 | 32 mm Dia |
| 43 | Tee25 mm Dia |
| 44 | 32 mm Dia |
| 45 | End Cap25 mm Dia |
| 46 | 32 mm Dia |
| 47 | Reducer20 mm x 15 mm |
| 48 | 25 mm x 20 mm |
| 49 | Reducer Tee20 mm x 15 mm |
| 50 | 25 mm x 20 mm |
| 51 | 32 mm x 25 mm |
| 52 | Reducer Elbow20 mm x 15 mm |
| 53 | 25 mm x 20 mm |
| 54 | Jet Nipple25 mm Dia |
| 55 | 32 mm Dia |
| 56 | Supplying and fixing in position PVC specials of the following dia andtypes of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing thedismantled portion to original condition etc., complele complying withstandard specifications. (The PVC specials should be got approved by the Fxeculive Fnoineer before use on works)PVC Elbow110mm Dia |
| 57 | 75mm dia |
| 58 | PVG Elbow with Door110mm dia |
| 59 | 90mm dia |
| 60 | PVC Tee110mm dia |
| 61 | 90mm dia |
| 62 | PVG Tee with Single Door110mm dia |
| 63 | 90mm dia |
| 64 | PVC \"Y\" with Single Door110mm dia |
| 65 | 90mm dia |
| 66 | Supplyingand fixing in posit on bestqualityand approved make Indian madewhite / colour glazed earthenwarewash hand basin of size 550 s 400mm (with pedestal)witha pairof cast ironbracI‹ets.inchdingcost 1.hmm diabrassCP pi ar tap,32mm dia \"6\"classGJ wastepipewilh rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nlpple 1Smm dia nylon oonnection, 32mmdia CPbraee waste coupling including fixing of wash basin .using C! brackets on to the wall in position withTWplugsandscrews,rubberwashers,whiteleadandgiving necesswywatersupplyannectionandpaintingthebracketswithtwo coatofpainlingoveraprimingcoatof .anti-oorrosivepaintinduding testing for leakages etc.. complete complying witn standardspecification and as directed by the departmental officers. (The wash hand dasln and specials. should be got approved by Ihe Executive Engineer before use |
| 67 | Supplying and fixing in position 1smm dia C.P.Shower rose & stop cock of approved make confirming to lS specifications and quality induding cost of Shellac thread etc. complying with standard specificalion.C.P. Shower Rose |
| 68 | Stop Cock |
| 69 | Supplying and fixing in position C.P- Towel rail 600mm long and 20mmdia with brackets of same materials including cost of teak wood plug and C.P. Screws etc. complete complying with standard specification |
| 70 | Supplying and fixing in position C.P. Soap Tray ol size 150 x 150mmincluding cosl of teak wood plug and C.P. screws. etc. complete comolvino with standard soecifi elion- |
| 71 | Supplying and fixing in position lndian make bewelled edge mirror ot size 600 x 450mm quality including cost of Rawal plugs, brass screws. elc. comolvino with standard soecifiation. |
| 72 | Supptying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \"P\" or \"S\" trap connecting with Cl pipe of 100mm dia / PVC pipe of 11omm dia, doubleflapped rigid PVC black seat and seat cover wilh CP brass hinges including cost of while cement, @ment for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC I 12.5 lilets capacity porcelin low level flushing tank with a pair of Cl brackets, etc., complete with all fittings such as \"lsmm brass ball valve with polythene float wilh brass handle, union, coupling connected by means of 40mm white PVC flush hand using lndian adopter joint including all internal fittings. |
| 73 | Supply and flxing in position of best lndian make white / colour glazed earthenware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with Gl pipe, 32mm dia bell mouth PVC connection and wasle pipe, 1smm dia Gl pipe of required length, 1smm dia GM wheel valve, 1smm dia brass nipple 2 Nos., and fixing lhe urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masonry and re.dolng the same to the original condition, etc., including painting the pipe with two coats of best quality approved synlhetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental otficers. (The urinal should be got approved by the Executive Engineer before use on works.) |
| 74 | Supplying and fixing position Cl Nahani Trap / Floor Trap of the followingsizes with best stainless steel gratings of approved brand and quality,fixed over a bed of brick jelly lime consete 1;2:5 (One part of lime, two part of Sand and llve part of 40mm gauge brick jelly) and finished with Cement Mortar \"1:3 (One Cement, Three Sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to lhe Cl / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer |
| 75 | Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with neessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete @mplying wilh standard specifietion. The rate is inclusive of cost of removable iron gratings of appropriate size.The size of Teak Wood plugs used is \"150x25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of \"U\" clamps at the centre of pipes to be fixed.\"l\"lomm dia PVC Pina 14 ,(^/C^nml |
| 76 | Providing rain waler harvesting using 3 No.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 No- of 6mm dia MS rod verti€lly and 3 No. of 6mm dia MS rod circumferentially tied logether with 18 guage binding wire for well rings including necessary earth work excavation 1 m dia to a depth of 1m, supplying and fllling 40mm HBG inside the erecled well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and scm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at \"15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing offexcavated earth with all initial leads and lifts in plaes as shown by the Departmental ofricers etc., complete in all respects. |
| 77 | ELECTRICAL WORKSEarthling as per lsl Specification with an earth electrode of 2.1mt class\"B\" Gl pipe of dia not less than 40mm and with 20mm dia copper earth flat of size 125mm x50mmx6mm, with funneling anangement using charcoal, common salt, G.l.reducer, check nuts etc., and masonry work and providing RCC cover slab 38mm thick for the Brick masonryincluding cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental otflcers. (SD 233) |
| 78 | Supplying and run off I SWG copper wire on walls or below ground level with necessary\"U\" nails, earth work ex€vation and refilling & including the most of all materials etc., complete in all respec{s as directed by the departmental otfimrs.(SD 75) |
| 79 | Supplying and Fixing of 3 Phase DB with MCB 12 way TPMCB sheet steel distribution boards (flush type/surface type) fitted with bus bars and neulral links with three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pile incoming MCB / lsolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally I ways in one segment) (3 x 4 ways in each segment) and separate provisions for MCB / lsolalor (tolally 12 Nos.) for sub incomers in 3 segments with label holder etc.complete in all respects as directed by the Departmental officers |
| 80 | Supply and run off 2 of 2.50sqm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with lsl mark confirming to 13:694/1990 with continuous earth connection by means of \",.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to 15:694/1990 in suitable PVC rigid pipe \"l.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respecis as direcled by the deparlmental officers. |
| 81 | Supply and run off 2 of 1.5 sqmm PVC insulated single core unsheathedcopper conductor cable of 1100 V grade with lsl mark confirming to15:694/1990 with continious earth connection by means of \"1.50 sqmPVC insulated single core unsheathed copper conductor cable confirming to 15:694/\"1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. |
| 82 | Supply and fixing of TNEB meter Board suitable for 32 A Three phaseservice connectionwith32Afuse unit(500V}32Aneukallinkandearthlink(1\"x1/8\" Copperflat) on T.W plankof size 600mmx450mmx 19mm with supportingT.W.keepers of 1“ thick oneither sider withpainting withsuilable bolt andnuts for fixingtheTW plankon wall withaarthconnBcdonand interconnectionwith7/20PVCinsulatedoopperwire from EBmeter to fuse uniL SD 127) |
| 83 | Supplyandrun of4core 16Sq.mmPVC Armoured cableof 1100 V grade with ISf mark.(Part E r) V |
| 84 | Supplyandrun of4 core 10 Sq.mmPVC Armoured cableof 1100 V grade with ISI mark.(Part E c) V |
| 85 | Wiringwith2x1.5sqmm{22 /0.3 )PVCinsulated singlecoreunsheathedcopperconductorcableof 1100V grade in suitable PVCrigid pipe conoealadin wall and ceiling with PVC accessories induCh with wall52 with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable ¢olour for PVC concaal6dlightpoint/Fanpoint(ForElectronic regulator). SD 23 |
| 86 | Wiringwith2x 1.5sqmm(22/0.3)PVCinsulated singlecoreunsheathedcopperconductor cableof 1100Vgrade insuitablePVCrigid pipe concealed in wall and ceiling with PVC accessories iri1fush with wall sawith150x 100x 113mm TWswitchbox with3mm hylumsheetcoverfor5A3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TCwireandmakinggoodoftheconcealedportion withsuitablecolourforconcealedPVCplugpain!. SD 38 |
| 87 | 18 W LED Tube Light for T 8 Fitting (single side) |
| 88 | Supply and fixing of AC Exhaust Fan 300 mm (12”) sweep (Light duty)including cost of all materials,/abour, lead, lift, etc complete |
| 89 | Conducting Geological Survey to fix borewell point etc., Complete |
| 90 | Drilling of Borewell anywhere in Tamilnadu including transportation from one place to another place within tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand,stone ,shale ,pebbles ,boulders etc.,by first taking a piot bore of 140mm/150mm dia and then enlarging to required dia by direct of reverse rotatry mud and circulation method using Contractor\"s rig,fuel,labour ,drilling , betonite mud and water required for drilling at the site shown by the TWAD Officers including Construction of Mud Pit (Only Calyx Drills are to be used) Etc.Complete From 120 m upto 150 m Depth ending from ground level |
| 91 | Supply of 150mm dia P.V.C casing pipe As Per IS 12818/2010 (Outer Casing) |
| 92 | Labour Charges For Inserting 150mm Dia M,S, Casing Assembly (With Slots or Without Slots) in the drilled and fuel charges drilled bore including jointing the pipe etc., complete |
| 93 | Drilling 150mm dia vertical bore in hard rock to any required as directed by Corporation Officers including charges for drilling and Water required for drilling and fuel(Drilling of borewell inside well 150mm dia.) |
| 94 | Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by Officers and conducting yield test by ‘V’ notch method. |
| 95 | Supply and Delivery of Clear Water Vertical Wet Type Submersible Pumpset Suitable For 150mm Dia Borewell Conforming to IS 8034/2002 With latest amendments and BEE 3 Star rated capable of Discharging noted LBM Against head of water column due to all causes.the pump shall be with stainless steel shaft and dynamically Balanced bronze or Cast SS Impeller,Brass screws and CI FG 200 Grade Pump Bowl/Difuser with ISI Mark.The Pump Shall be directly Coupled to a Continuous rated two pole Suitable wet Type Vertical Squirrel cage induction motor as per IS 9283 Suitable for Operation in AC 3 Phase 415 V+/- 10 % , 50 HZ +/-5% Duty (50 lpm x 100m) Three Phase Submersible Pumpset Suitable for 150mm Dia Borewell As Per IS 8034/2002 Witout Panel Board |
| 96 | Supply and Delivery of Direct Online Starter Confirming to ISI 13947 and IEC 947 Suitable KW Rating for Operation in AC/Single Phase/50HZ (+ 5%) and 415 V (+-10%) Including Ammeter,Voltmeter ,Thermal ,Overload Relay , 16Amps 2 Pole Magnetic Contactor with Under Voltage Protection , Indication Lamp,Starting Capacitor,running Capacitor and On/Off Push Button Switches,5 Way Connector , wiring with 1sq.mm / 1.5sq.mm Copper PVC Insulated Cable,Powder Coated Vermin Proof Box including the Capacitor (the Costy of Capacitor is to be taken Separately) Etc.Complete.THREE PHASE PANEL BOARD - D.O.L WITH TWO LEVEL GUARD AND AUTO START (3HP Submerible Pumpset) |
| 97 | Supply of PVC pipe sand GI pipes and specials.32mm UPVC Pipe |
| 98 | 32mm UPVC Pipe |
| 99 | 32mm G.M Gatevalves |
| 100 | 32mm GI Adopter |
| 101 | 32mm GI Hex Nipple |
| 102 | 32mm GI Union |
| 103 | 32mm G.I Elbow |
| 104 | 32mm G.I Tee |
| 105 | 32mm G.I pipe |
| 106 | 32mm G.I.couplings |
| 107 | 32mm Clamp set |
| 108 | 150mm bore well cover |
| 109 | Nylon Rope |
| 110 | Labour Charges For the erection of Submerisble Pumpset in Borewell/Openwell including fixing and jointing submersible Cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN Switches starter,voltmeter ,Ammeter ,Three pilot (Indicating) lamps capacitor single phasing preventor , water level guard and laying and jointing the cables and twin earthing as per IE Rules etc.,complete and testing the pumpset and trail run for 10 Days |
| 111 | Supply and delivery of PVC insulated and sheathed 4.00 sq mm copper cable conforming to IS 694/1990 suitable for submersible pump set. |
| 112 | GST 18% |
AI Tender Summary
Tender Timeline
Jan 09, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 23, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 24, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender