Tender For Proposed New Class Room In Cps School At Mugathuvarakuppam, In Division-1, Unit-1, Zone-1(Councillor Fund)
Tender Value
4.92 Lakhs
Estimated cost
Bid Submission
09 Jan 2023
0 days left
EMD
4930
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thiruvottiyur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Proposed New Class Room In Cps School At Mugathuvarakuppam, In Division-1, Unit-1, Zone-1 ( Councillor Fund )
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement for RCC column footings,pintol blocks, plinth beam, staircase steps, critical steps, critical piers,etc.,using mild steel sheets of size 90x60cm and 10 gauge stiffened with welded mild steel angles of size 25 x 25 x 3mm for boarding laid over silver Oak (country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cm centre to centre etc.,complete. |
| 2 | Providing and laying in position ,Standardised Concrete Mix M-20 Grade in accordance with IS456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and m,aximum water cement ration of 0.55, including admixture (Plasticiser / Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about (5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, nut excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be made by the Department for the excess usage of materials) |
| 3 | Brick work with bricks (9\"x4 3/8\" x 2 3/4\") second class chamber burnt G.M. in C.M.1:6 ( 1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) including curing, etc.,Complete,for 23cm |
| 4 | Plastering with cement mortar 1:4 (1 cement and 4 P sand)12mm thick including curing, etc., complete. |
| 5 | White washing two coats over newplastered surface. |
| 6 | Colour washing two coats over newplastered surface. |
| 7 | Painting new iron work with one coat ofapproved primer.(ISI STD) |
| 8 | Making and fixing M.S.Sheet gate of size for locking arrangements, name boards (C.M.) including cutting iron members, welding fixing gatein position,etc.,complete as directed during execution.(The design of gate furnished is subject to alteration during execution.) (ISI STD) |
| 9 | Supplying and fixing M.S.Grills for OSR Land/Parks compound wall of design using 25 x 10mm MS flats for outer frame Horizontally & vertically. The inner vertical grills shall be 10x10mm square rods at the spacing of 96mm c/c. The inner horizontal grills shall be 25 x 10mm MS flats adjoining 10 x 10mm square rods both sides at the spacing of 290mm c/c. Thehorizontal anchoring to wall shall be 20 x 5mm. The vertical anchoring shall be 25 x 10mm. The arrows with vertical shall be 20 x 5mm. (Sketch enclosed) and also as directed during execution |
| 10 | ROLLING GRILLS (WITH ISI MONOGRAM) Supplying and erecting pull and push type rolling shutter with I.S.I make of approved size and section using 18 G.I sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of Hood covers, transportation charges etc(Manually operated type up to 8 sq.m. area) |
| 11 | Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS socket with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed power plugpoint |
| 12 | Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable open PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour |
| 13 | Supply and run of 4 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable open PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour |
| 14 | Supply and fixing of surface mount patty type 1 x 36 watt T.L fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. |
| 15 | Supply & Fixing of 48\" sweep size CEILING FAN of 5 Star Rated with double ball bearing , down rod, canopy complete set (with out speed regulator) ( INCLUDIN SUPPLY & FIXING OF FAN CLAMP WITH SIDE PLATE AND 45 cm. ( 18\" ) CROSS ARM WITH 700 MM DOWNPIPE ) |
| 16 | Paving the flooring with first quality plain CERAMIC TILES of all colours of size 305mmx305mmx6mm set in C.M.1:3,12mmthick including pointing with white cement, labour, materials, etc., (ISI.std) |
| 17 | Supplying and erecting in position LIGHT DUTY STEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm to the relevant Indian Standard specification. The trusses shall be procured only from reputed manufactures of trusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design. The rate quoted shall include the cost of trusses. Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red-oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc., The roof sheeting shall project 0.762m from the eves purlins. For structures like CYCLE STAND, PARKING GARAGE, TEMPORARY ENCLOSERS |
AI Tender Summary
Tender Timeline
Jan 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender