Tender For Construction Of Oht Tank At Kattupalayam In Talguni Panchayat In Nambiyur Block Under Jjm 2020-21
Tender Value
6.15 Lakhs
Estimated cost
Bid Submission
19 Jan 2023
0 days left
EMD
6500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nambiyur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Oht Tank At Kattupalayam In Talguni Panchayat In Nambiyur Block Under Jjm 2020-21
BOQ
| Sl. No. | Item Description |
| 1 | Name of Work : Providing Construction ofthe 10000 lit RCC OHT7.50 mtr stage under Water supply to near KattupalayamH/O Talguni |
| 2 | Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification |
| 3 | In hard stiff clay, stiff black cotton soil, hard red earth, sales, soil S.S. 20B |
| 4 | Sand filling for fountation with clear Filling Sand including all charges |
| 5 | PCC 1:4:8 using 40mm HBG metal including mixing curing etc. |
| 6 | Below 1.50 m from GL. |
| 7 | RCC 1:1 1/2: 3 using 20mm HBG metal excluding cost of reinforcement and centering but including cost of mixing, laying, finishing, curing etc |
| 8 | For items 1.5 mto 4.5 m blow GL |
| 9 | 0to 1.50 mbelow GL |
| 10 | 0 to 4.50 m from GL |
| 11 | 4.50 mto7.32 m. fromGL |
| 12 | 7.32m to 10.98m from GL |
| 13 | Steel centering for sides and soffits includingnecessary supports and strutting to the required height for RCC items using M.S sheet of suitable size ofBG 10 gauge stiffened with welded MS angles of size25mm x 25mm x 3m of boarding, laid over silver |
| 14 | Plane SurfacesBelow GL |
| 15 | GL to 3.30m above GL |
| 16 | Above 3.30m to 4.30 m |
| 17 | Above 6.31-7.30m |
| 18 | Curved Surface 0-3.30m |
| 19 | 5.31-6.30m |
| 20 | Square column : BGL |
| 21 | 0 to3.30m |
| 22 | 3.31 to 4.30mm |
| 23 | 4.31 to 5.30mm |
| 24 | 5.31 to 6.30mm |
| 25 | 6.31 to 7.30mm |
| 26 | Supply, fabrication, placing in position of steel rods cutting tying etc. complete including cost of reinforcement RTS rods |
| 27 | Exterier plastic emulsion painting two coats with approved emultion paint including costand conveyance of all materials to site and all labour charges etc complete. |
| 28 | Supplying and fixing of Cut stonein RCC 1 : 11/2 :3 Using 20HBS below inlet pipe |
| 29 | Providing and fixing of RCC inner accass ledder in RCC 1:1.5:3 using 20mm HBS stone for OHT including cost of rainforcement , placing grill in position, centering shuttering charges, mixing concrete, curing, etc., |
| 30 | Supply, delivery and fixing of Outside M.S. ladder of 4.5cm width made out off50x50x6mtr M.S. angle for sides and steps in 16mm MS plain rods fixed at 30cm center to center welded, jointed etc., providing with suitable side supports, clamps,and locking arrangements provided with one cost of red oxide paint for providing access to roof top of OHT of suitable inclined length, including bottom anchorage and transportation. |
| 31 | Supply and delivery of manhole cover of size 60cm x 60cm (heavy duty) with frame |
| 32 | Fixing of manhole cover in RCC 1:1.5:3 with suitable rainforcement inM.S angle fixed along edges |
| 33 | Refilling the foundation with excavated earth including consolidation |
| 34 | Provision for65mm G.Ipipes and 50mm Gate Valve,G.I & PVC Specials for tank connection works. |
| 35 | 50mm dia GI Pipe for scour pipes |
| 36 | 50mm dia GM Gate valve |
| 37 | 50 mm dia Flange set |
| 38 | 50mm dia GI coupling |
| 39 | 50 mm dia GIElbow |
| 40 | Supply and delivery of pvc pipes and specials |
| 41 | 63mm PVC Pipe 4 ksc |
| 42 | 63mm PVC Elbow |
| 43 | 63mm PVC End Cap |
| 44 | Earth work excavation and deposit on bank with in the lead of 10m and lift of 2 m in all soil classification |
| 45 | lowering of PVC pipe in the trunch inc.jointing with cement solvent |
| 46 | Refilling of the trunch with excavated earth |
| 47 | Painting scheme details in accordance with the size and specifications including writing details like, name of scheme, estimate amount capacity of service Reservoir etc. |
| 48 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \"BB\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) |
AI Tender Summary
Tender Timeline
Jan 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 19, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 19, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender