Andaman Public Works Dept-APWD has published Tender For Repair Maintenance Of Central Laboratory. Sub Work :- Supply Installation And Commissioning Of Scientific/Civil Engineering Lab Equipments.. Submission Date for this Tender is 09-02-2023. Kitchen Equipment Tenders in blair Andaman And Nicobar Islands. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Jan-2023 | Corrigendum | Date | 30-01-2023 |
| 2 | 25-Jan-2023 | Corrigendumno234 | Date | 09-02-2023 |
| 3 | 25-Jan-2023 | CORRIGENDUMNO241 DATED 24-01-2023 | Technical Bid | 09-02-2023 |
| Sl. No. | Item Description |
| 1 | Providing, Supplying, commissioning and demonstration of GI Frame Test Sieves 18” Dia Size:make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 2 | 50 mm |
| 3 | 25 mm |
| 4 | 31.5 mm |
| 5 | 16.0 mm |
| 6 | 12.5 mm |
| 7 | 10.0 mm |
| 8 | 6.3 mm |
| 9 | Lid & pan |
| 10 | Providing, Supplying, commissioning and demonstration of Brass Frame Test Sieves 200mm Dia. Size: 90 mic. make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 11 | Providing, Supplying, commissioning and demonstration of Brass Frame Test Sieves 200mm Dia. Size: 500 mic make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 12 | Providing, Supplying, commissioning and demonstration of Shrinkage Bar Mould Single Gang make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 13 | Providing, Supplying, commissioning and demonstration of Le Chatelier Mould,( Set of 6pc)Standards:IS 269, 712, 5514, 1727 , 2645, 6932 ( Part IX) BS 6463 Specification: It Consists Of A Small Split Cylinder Forming A Mould. On Either Side Of The Split Cylinder. Two Parallel Indicating Arms With Pointed Ends Are Attached. Supplied Complete With Two Glass Plates And A Lead Weight. make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 14 | Providing, Supplying, commissioning and demonstration of Le Chatelier Water Bath Double Walled Inner Chamber In Stainless Steel Outer Chamber In Mild Steel Temperature Range Ambient To 100°C Controlled By Capillary Thermostat. Accuracy ± 1°C Operated On 230v A.C. Single Phase. These Baths Are Suitable For Washing Marshall Specimen. Lid Is Made Up Of Stainless Steel With A Hole For Glass Thermometer To Penetrate. make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 15 | Providing, Supplying, commissioning and demonstration of Vicat Needle Apparatus With Dashpot With MTC Specification: The Apparatus Consists Of A Metallic Frame Bearing A Freely Movable And With A Cap At Top, One Vicat Mould And Glass Base Plate And One Set Of Needles One Each Initial Needle, Final Needle And Consistency Plunger. It Comes With A Dashpot Which Facilities Gentle Lowering Of The Needles. Accessories : Mild Steel Base Plate 5 Inches X 5 Inches. Fulcrum Mould , Brass , 80 Mm I.D. Base Dia X 70 Mm I.D. Top Dia , 40 Mm Height. make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 16 | Providing, Supplying, commissioning and demonstration of Specific Gravity And Water Absorption Of Aggregates Model With NABLCalibration Certificate Standards: IS 2386 (Part Iii) & BS 812 Specification: The Buoyancy Balance System Consists Of A Rigid Support Frame, Incorporating A Water Tank Mounted On A Platform. A Mechanical Lifting Device Is Used To Raise The Water Tank Through The Frame Height Immersing The Specimen Suspended Below The Balance. The Balance Supplied May Also Be Used As A Standard Weighing Device, Thus Providing A Versatile And Comprehensive Weighing System In The Laboratory Specification: The Outfit Comprises Of • Electronic Balance, Capacity 15 Kg. Least Count 0.5gm, Provision Is Made In This Balance To Suspend density Basket Under Material Pan. This Balance Is mounted On An Angle Iron Frame Stand. 1 No • Density Basket. 1 No • Air Tight Container To Suspend Density Basket. 1 No • Gi Tray Of Area Not Less Than 650 Cm Sq. 1 No. • Absorbent Cloths 75cm X 45cm. 2 Nos. make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 17 | Providing, Supplying, commissioning and demonstration ofLos Angeles Abrasion Testing Machine With NABLCalibration Certificate Standards: IS 2386 (Part Iv) ASTM C 131, AASHTO T-96 Specification: The Machine Consists Of A Hollow Cylinder Mounted Horizontally On A Study Frame On Ball Bearings. There Is An Opening Which Can Be Closed With A Dust Tight Cover To Facilitate Charging And Discharging The Drum With The Material Under Test. A Detachable Shelf Which Extends Throughout The Inside Length Of The Drum Which Catches The Abrasive Charge And Does Not Allow It To Fall On The Cover. The Drum Is Rotated By An Electric Motor Through A Heavy Reduction Gear At A Speed Of 30-33 R.P.M. A Revolution Counter Is Fitted To The Frame. A Tray Is Supplied For Collection Of The Material At The End Of The Test. Complete With Abrasive Charge Consisting Of A Set Of Twelve Hardened Steel Balls, Approximately 48mm Dia. Suitable For Operation On 440 V, 3 Phase, 50 Cycles, A.C. Supply make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 18 | Providing, Supplying, commissioning and demonstration of Electrical Oven DoubleWall For Soil Inside Chamber In Ss Outside Mild Steel With Digital TemperatureController Along WithBlower With Circulation The AirAmbient Temperature With Two Tray 2500csize: 18”X18”X18” With NABLCalibrationmake AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 19 | Providing, Supplying, commissioning and demonstration of Digital Double Door Oven Zi Model No : 9014225 liter Cap. , Temp. Amb. To 250 degree C or equivallent specification This Range of Ovens Is Designed For Drying Large Quantities Of Soil And Aggregate Samples And Maintains Temperature In Accordance With Most B.S. And ASTM Requirements. The 225 Lts. Are Economy Models Constructed With Coated Mild Steel Exterior And Stainless Steel Coated Interior Chamber, Which Is Both Durable And Corrosion resistant. These Units Meet The Requirements Of Bs 1377 And Are Ideal For On-Site Laboratories And General Soil And Aggregate Testing. Options And Accessories: • Dial Thermometer With Collar Fixing For Door • Heavy Duty Shelves (On Request At An Extra Price) • Color Of The Oven (Only On Qty. Greater Than 3 Units) Specifications: • The Larger Soil Drying Ovens Are Constructed With Mild Steel And Powder Coated Exterior And Stainless Steel Coated Chamber Which Is Both Durable And Corrosion Resistant. • All Sizes Of Oven Are Fitted With A (Pid Controller) Having A Microprocessor Digital Control As Standard. • All Units Comes With Mcb Tripping Device In Cases Of Any Short Circuit, Overloading Of Voltage And Low Voltage Cut Off. Wiring Of Heaters Can Be Connected / Dis-Connected Removing The Side Panels Of The Oven. |
| 20 | • Caster Wheels With Locking Arrangement Are Fitted Below The Oven For Easy Movability Of The Unit From One Place To Another. Door Locking Arrangement Is Very Easy Convenient With Lever To Lock Unlock With Half Turn Lever • A Safety Thermostat Is Fitted Inside The Oven For Safety Purpose. Incase Of The Failure Of The Pid Controller The Safety Thermostat Will serve As The Temperature Controller. • A High / Low Switch Is Fitted On The Panel Of The Oven For Heaters. This Feature Allows Heaters To Burn All Together Or Half Of Them. • The Least Count Division For Viewing / Setting The Temperature is 0.1º C make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 21 | Providing, Supplying, commissioning and demonstration of Standard Compaction Test (Is)Standards: IS 2720 (Part-VII) Specification: Instrument Consists THE APPARATUS CONSISTS ONE EACH OF COMPACTION MOULD MILD STEEL, 100 MM I.D. X 127.3MM HEIGHT X 1000 CC VOLUME, COMPLETE WITH COLLAR AND BASE PLATE.COMPACTION RAMMER IS 2.6 KGS IN WEIGHT X 310MM CONTROLLED FALL make AIMIL/LAWRENCE & MAYO/LYNX/ENKAY/Zeal International Enterprises. |
| 22 | Providing, Supplying, commissioning and demonstration of Heavy Compaction Test (IS)Standards: IS 2720 (Part-VIII Specification:Instrument Consists One Each Of Compaction Mould Mild Steel 150 Mm I.D. X 127.3mm Height Volume 225°c. Complete With Collar And Base Plate. Compaction Rammer Is 4.89 Kgs. In Weight X 450 Mm Controlled Fall. Note : Instead Of Steel Moulds, Gunmetal Mould Are Also Available make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 23 | Providing, Supplying, commissioning and demonstration of Sand Pouring Cylinder – IS,Standards: Is 2720 (Part XXVIII) 1966 Specification: This Apparatus Is Used For The In Place Determination Of The Dry Density Of Compact, Line And Medium Grained Soils And For Layers Not Exceeding 500mm Thickness. The Complete Apparatus Consists One Each Of Small Sand Pouring Cylinder, 3 Litre Capacity Fitted With Conical Funnel And Shutter. Cylinder Calibrating Container, Internal Dia 100mm And 150mm Height. Accessories: Metal Tray, 300mm Square And 40mm Deep With Hole make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 24 | Providing, Supplying, commissioning and demonstration of Liquid Limit Apparatus Hand Operated With MTC Specification: Casagrande Method In Mechanical Form Is Known As Liquid Limit Method And Has Been In Use For Soil Mechanics For A Number Of Decades. The Liquid Limit Data Of Soils Is Useful To Correlate Mechanical Properties Of Soil, Such As Compressibility And Lower Shear Strength. Liquid Limit Is The Water Content At Which Soil Passes From Zero Strength To An Infinite Strength, Hence The True Value Of Liquid Limit Cannot Be Determined. For Determination Purpose Liquid Limit Is That Water Content At Which A Part Of Soil, Cut By A Groove Of Standard Dimensions, Will Flow Together For A Distance Of 1.25cm Under An Impact Of 25 Blows In A Standard Liquid Limit Apparatus. The Soil At The Water Content Has Some Strength Which Is About0.17n/Cm. Sq. (17gms/Sq.Cm.) . At This Water Content Soil Just Passes From Liquid State To Plastic State. It Consists On A Brass Cup Held On An Adjustable Bracket. The Cup Can Be Adjusted For A Fall Of 1 Cm And Can Be Raised An Dropped On A Rubber Base Of Standard Hardness By Cam Action. Complete With One Casagrande Grooving Tool, One Astm Grooving Tool And A Height Gauge Block. A Counter To Register The Number Of Blows.make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 25 | Providing, Supplying, commissioning and demonstration of Aggregate Impact Test machine with counter, mould and steel rod 16 mm dia. |
| 26 | Providing, Supplying, commissioning and demonstration of Plastic Limit Set Model Is 2720 (Part-VII) ASTMD-42, BS 1377 AASHTO T 90 Moisture Contents At Which Soil Has Smallest Plasticity Is Called Limit. For Determination Purpose Plastic Limit Is Defined As The Water Content At Which A Soil Will Just Begin To Crumble When Rolled In To A Thread Of 3mm Dia. Specification: The Complete Set Consists Of One Each : 1. Glass Plate 20cm X 15cm Having Round Ends 2. Brass Or Stainless Steel Rod 3mm Dia X 150mm Long 3. Flexible Spatula 15 Cm 4. Set Of 6 Moisture Containers 5. Porcelain Basin 150mm Dia 6. Plastic Wash Bottle 500ml make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 27 | Providing, Supplying, commissioning and demonstration of Digital California Bearing Ratio Test Apparatus (CBR)Standards: IS 9669, IS: 2720 (Part XVI) With NABLCalibration Certificate the Lab test Is Designed For Performing Laboratory Evaluation Of The Cbr Value Of Highway Sub Bases And Sub grade And For The Determination Of Strength Of Cohesive Materials Which Have Maximum Particle Sizes Less Than 19 Mm (3/4”). The Machine Is Designed To Be Mounted On A Suitable Bench And Comprises Of A Robust And Compact Two Column Frame With Adjustable Upper Cross Beam. The Frame Is 50 Kn Capacity. Three Test Speeds Are Provided 1.25 Mm/Min, 1.50 Mm/Min & 2.5 Mm/Min Tests. This Main Feature Allows The User To Perform Tests. Laboratory California Bearing Ratio Apparatus With Software & Pc Interface. Zi 3066a Three Speed Load Frame, 50kn ( 5000 Kgf) Capacity Zi 3066b Mould 150mm Id X 175mm High Zi 3066c Perforated Base Plate For Zi3074- 2 Mould Zi 3066d Extension Collar, 150mm Id X 50mm High Zi 3066e Penetration Piston, 50mm Face Dia Zi 3066f Adjustable Bracket, For Penetration Dial Gauge Zi 3066g Circular Metal Spacer Disc. With Detachable Handle 148 Mm Dia X 47.7 Mm High Time. Zi 3066h Annular Metal Weight, 2.5kg, 147mm Dia With 53 Mm Dia Central Hole |
| 28 | Zi 3066i Perforated Metal Weight 2.5 Kg. 147mm Dia, With 53mm Dia Soft Zi 3066j Perforated Plate, 148mm Dia, With Adjustable Stem And Lock Nut Zi 3066k Metal Tripod For Dial Gauge Zi 3066l Cutting Collar Zi 3066o S Type Load CellCapacity 50 Kn Zi 3066p Lvdt, 25 Mm Travel, 0.01mm Least Count Optional Extras: Salient Features:- • No Need Of Separate Observation On Dial Gauge And Proving Ring. • Facility To Readout Rate Of Loading In Mm/Minute. • Tare System To Nullify Initial Load The Digital Lcd Display Will Retain The Peak Value Until It Is Cleared. • Flow Value And Load On A Single Screen. • Flow Value With A Least Count Of 0.01 Mm With Accuracy Of 1%. • Load Value With A Least Count Of 0.1 Kg / 0.001 Kn With Accuracy Of 1%. • Back Light Facility To Observe The Readings Even In The Dark. • Two Line Readout Showing Load, Flow, And Speed. • Software Interface To PC And Plot Live Graph. make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises |
| 29 | Providing, Supplying, commissioning and demonstration of Shrinkage Limit Set Standards:Is 2720 (Part-V) Astm D 427, Bs 1377, AASHTO T 92. Specification: Shrinkage Limit Is The Maximum Water Content At Which A Reduction In Water Content Does Not Cause An Appreciable Reduction In Volume Of The Soil Mass. At Shrinkage Limit, On Further Reduction In Water, Air Enters In To The Voids Of Soils And Thus Keeps The Volume Constant. The Apparatus Can Be Used To Determine Shrinkage Limit And To Calculate Other Shrinkage Ratio, Shrinkage Index And Volumetric Shrinkage Set Consists Of One Each: 1.Porcelain Evaporating Dish 2.Shrinkage Dish 3.Glass Cup 4.Perspex Plate With Three Metal Prongs 5.Flexible Spatula 100mm 6.Glass Cylinder 7.25ml X 1ml, Supplied Without Mercury 8.Plastic Wash Bottle 500ml make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 30 | Providing, Supplying, commissioning and demonstration of Enamel Tray make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 31 | Enamel Tray 10 X12” |
| 32 | Enamel Tray 12” X18” |
| 33 | Enamel Tray 18” X24” |
| 34 | Providing, Supplying, commissioning and demonstration of Triaxial Test Apparatus Electrical With 10 Kn Load Cell And 25 Mm X 0.01 Lvdt ,2 Channel Data Acquisition System And Software make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. (Rates included Sub head A to D) |
| 35 | Providing, Supplying, commissioning and demonstration of Load Frame, Motorised, 3 Speeds With Dial Gauge Features: · Two Pillar Type ·Detachable Frame ·Enclosed Motor And Gear System · Jewel Lamps Indicating Direction Of Motion · Operational Ease · Useful For Triaxial And Cbr Tests The Load Frame Consists Of A Cabinet Which Houses The Gear System And Motor With Sturdy Angle Iron Frame. The Loading Is Done Through The Bottom Loading Platen, Which Is Carried On A Lead Screw, Which Advances Upwards. The Top Load Bracket, Which Slides Over Two Upright Pillars, Can Be Positioned At Any Desired Height And Locked. It Carries A Screw Adapter For Standard Proving Rings And Load Cells. The Loading Part Of The Unit Is Detachable From The Main Unit For Ease Of Transport And To Avoid Damage To The Tension Rods. Rates Of Strain: 6 Fixed Speeds 1.25, 1.50, 2.50 Mm/Min. Suitable For Operation On 230 V, 50 Hz, Single Phase, Ac Supply make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 36 | Providing, Supplying, commissioning and demonstration of Lateral Pressure Assembly 10kg / Cm² It Is Designed For Application Of Cell Pressure Upto 10kg/Cm2 On A Triaxial Specimen In The Triaxial Cell. The Unit Is Mostly Used In Routine Tests Which Last For About 10 To 15 Minutes Wherein The Variations Of Cell Pressure Can Be Tolerated. Specification : The Apparatus Consists Of A Pressure Chamber Which Has A Flanged Top Cap Fitted With A 10 Kg/Cm2. Pressure Gauge And A Valve For Pumping In Air. Water Inlet And Drain Cock Are Fitted To The Chamber. The Foot Pump Supplied Easily Develops A Pressure Of 10 Kg/Cm2 Complete With Connecting Pressure Hose. Note: Also Available 20kg/Cm2 make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 37 | Providing, Supplying, commissioning and demonstration of Triaxial Cell For 38 mm Dia The Accessories & Foot Pump Specification:The Cell Is Useful For Testing 38mm Dia X 76mm High Soil Specimen. Transparent Perspex Chamber With Anvil And Loading Plunger, The Cell Is Easily Opened By Releasing Four Nuts Of The Tie Rods. It Is Leak Proof Up To 10kg/Cm.Sq. Fluid Pressure. An Oil Plug Which Can Also Be Used As An Air Vent Is Provided For Introducing A Thin Layer Of Oil Over Water. This Provides Effective Sealing At The Plunger For Long Duration Tests. The Cell Is Fitted With Four Sleeve Packed Valves Of No Volume Change Type On The Base. These Valves Are Used For Cell Pressure, Pore Water Pressure, Drainage Or Back Pressure. The Loading Plunger Of The Cell Has Dial Gauge Rest. •Loading Pad Made Of Perspex For 38mm Dia Specimens. •Pair Of Plain Discs Made Of Perspex 38mm Dia 6mm Thick. •Pair Of Porous Stones 38mm Dia Specimen. •Split Sand Former For 38mm Dia Specimen. •Sheath Stretcher For 38mm Dia Specimen. •One Dozen Rubber Sheaths For 38mm Dia Samples. •For Synthetic Rubber ‘O’ Rings For 38mm Dia Specimen. •One Plastic Drainage Tube. make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 38 | Providing, Supplying, commissioning and demonstration of Pore Pressure Apparatus 10 Kg/Cm² Specification: The Apparatus Consists Of A Panel For Wall Mounting On Which Are Fitted 1.0 To 10kgmanom/Cm Sq X 0.1kg Cm. Sq. A Pressure Gauge, Bourdon Tube Type 15 Cm Diameter: Glass U-Tube Manometer For Measuring Low Positive Pore Pressures Negative Pore Measures And Checking Zero Error Of Pressure Gauge. It Is Provided With A Mercury Trap (Mercury Supplied At Extra Cost.) Null Indicator Made Out Of Clear Transparent Perspex With Mercury Trap And Cursor To Indicate The Mercury Level. Burette: 50ml Burette For Measuring The Volume Change In The Soil Specimen. Pressure Pump Fitted With Four Sleeve Packed Valves, Operated By Means Of A Hand Wheel On The End Of The Piston Rod Which Is Threaded Through The Pump Cap And Gives A Smooth, Fine Adjustment Of Pressure. Copper Coil And Water Reservoir Is Fitted On Board With Complete Stand Assembly. The Unit Is Tested Against Leaks Up To 10kg/Cm Sq.make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 39 | Providing, Supplying, commissioning and demonstration of Ring & Ball Apparatus (Semi Automatic)Model No. Zi 4003 Ref. Standards - Is:1205, Astm D 36, E 28, Ip 198, Ip 58, AASHTO T53, Bs:2000, En 1427 With NABLCalibration Certificate For Determining The Temperature At Which A Sample Of Bituminous Material Loaded By A 9.5 Mm Dia Steel Ball, Drops A Specified Distance When Heated Under Specified Conditions. Ring And Ball Apparatus The New Design Of Ring And Ball Apparatus Is Compact User Friendly And Has Better Aesthetics. It Has Magnetic Stirrer With Heating Facility And Digital Display Of Temperature, The Heating Can Be Adjusted Through Knob. Suitable For Operation On 220 V, 50 Hz, Single Phase, Ac Supply. Each Unit Is Supplied With A Bath Of Heat Resistant Glass And TheFollowing: Zi 4003-A Tapered Rings 2 Nos. Zi 4003-B Ball Centering Guide 2 Nos. Zi 4003-C Steel Balls Of 9.5 Mm Dia 2 Nos. Zi 4003-D Ring Holder 1 No. Zi 4003-E Electric Heater (Hot Plate) 1 Nos. make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 40 | Providing, Supplying, commissioning and demonstration of Marshall Stability Test Apapratus Model No : Zi – 4022 or equivalent Astm : D 1559 T-62 Bs 598-107 With NABLCalibration Certificate Marshall Apparatus Consists Of: • Robust Construction • 50kn Capacity • Rate Of Travel 50.8mm/Min • Safety Cut-Off Switch It Consists Of Body Housing, A Geared Screw Jack And Motor Drive Mechanism Suitable For Operation On 230 V,50hz, Single Phase, A.C. Supply. Zi 4022-A Marshall Load Frame 1 No. Zi 4022-B Breaking Head Stability Mould, 100mm Mm With A Dial Gauge ( Having 25mm Travel And 0.01mmleast Count), For Flow Measurement 1 No. Zi 4022-C Compaction Mould, Steel Cylindrical 100mm3 Nos. Zi 4022-D Base Plate 3 Nos. Zi 4022-E Extension Collar 3 Nos. Zi 4022-F Compaction Pedestal, 100mmManual Operation, Comprising A Steel Plate Capped On A Wooden Post. A Mould Clamp Is Fitted To The Top Of The Plate . 1 No. Zi 4022-G Compaction Hammer, 100mmSatisfies Bs 598. The Hammer Has A 4535 G Sliding Weight With A Free Fall Of 457 Mm 2 Nos. Zi 4022-H Load Transfer Bar 1 No. Zi 4022-I Paper Discs, Non Absorbent, 11 Cm Diameter Pack Of 100 No. 1 Pkt.make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 41 | Providing, Supplying, commissioning and demonstration of Marshall Mould Complete With Collar & Base Plate 100mm make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 42 | Providing, Supplying, commissioning and demonstration of Centrifuge Extractor Motorised, Zi 4014 or equivalent Standards:ASTM D2172 AASHTO T-58, T-164 Specification: Centrifuge Extractor, Electrical Operation, Capacity 1500g, With A Dimmer Stat For Speed Control From 2,400 To 3,600 Rpm. Suitable For Operation On 230 V, 50 Hz, Single Phase, A.C. Supply make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 43 | Providing, Supplying, commissioning and demonstration of Ductility Testing ApparatusDigital Aimil Type Model No. Zi – 4025or equivalent With NABL Calibration Certificate Standards:IS 1208-1058, ASTM D 113, IP32, 55, AASHTO T 51 Specification: Designed To Test Three Specimens Simultaneously. The Machine Consists Of A Carriage Moving Over A Lead Screw. An Electric Motor Driven Reduction Gear Unit Ensures Smooth Constant Speed And Continuous Operation. The Entire Assembly Is Mounted With A Stainless Steel Lined Water Bath Completely Encased In Metal Bound Hardwood. It Is Equipped With An Electric Pump Circulator And Heater. The Temperature Is Controlled Thermostatically. Two Rates Of Travel I.E. 50 Mm/Min And 10 Mm/Min Are Provided. Suitable For Operation On 230 V, 50 Hz, Single Phase, A.C. Supply. make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 44 | Providing, Supplying, commissioning and demonstration of Standard Digital Penetrometer( Made In Italy) Used To Determine The Consistency Of A Bituminous Sample Under Fixed Conditions Of Load, Time And Temperature. The Penetration Is Expressed In Distance Of Tenths Of Millimeters Vertically Penetrated By A Standard Needle. The Standard Penetrometer Is Ruggedly Constructed, With An Aluminium Base Table With Levelling Screws, Plated Vertical Rod, “Micrometric Vertical Adjustment Device”. The Slider Is Brass Made With Free Fall. The Digital Readout Of The Penetration Values Has Readings In Mm And Inch, With 0.01 Mm Resolution, Lcd 5 Digits Display, With Zero Set In Any Position. Power: 1.5v Battery. The Penetrometer Is Supplied With Stop And Release Push Button, Automatic Zero Set, Micrometer Adjustment, Set Of Weights 50 And 100 G Penetration Needle, Brass Sample Cups Diameter 55x35 Mm And 70x45 Mm. Dimensions: 220x170x410 Mm Weight: 11 Kg make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 45 | Providing, Supplying, commissioning and demonstration of Digital Penetrometer Zi 4008 or equvalent Standards: IS 310, 1203, 1448, IP 60, 49, 50 Astm D5, 217, D637, BS 2000-49 Specification: Same As Zi 4007 But The Unit Is Compact With Timer To Control Duration Of Penetration. The Instrument Is Provided With Lead Screw Gear Arrangement, Leveling Screws, Spirit Level And A Digital Preset Timer make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 46 | Providing, Supplying, commissioning and demonstration ofStripping Value Apparatus, Zi 4012 or equivalent make with Standards: Specification: A Circular Tray Rotates In A Vertical Plane At A Rate Of Approximately 100 R.P.M. By An Electrical Geared Motor. 4 Bottles Of Approximately 400 Cc Are Mounted On This Circular Tray At An Angle Of 900. To Each Other With Their Mouth Towards Center Of The Tray. A Time Switch Is Provided. Suitable For Operation On 230 V A.C. Single Phase.make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 47 | Providing, Supplying, commissioning and demonstration of Core Cutting/Core Drilling Machine (Petrol) Model NoZi 6001 with 100mm Core Bit or equivqlent make Specification: Suitable To Cut/Drill Cores Of Concrete, Rocks, Stones, Tiles Or The Similar Materials. The Machine Is Suitable For Core Samples Of Size Upto 150mm Diameter With The Help Of Thin Walled Diamond Bits Which Are At Extra Cost. The Machine Has Sturdy Base With Pillar Support In Which Rack And Pinion Is Provided For Adjustment In Height And Penetration Assembly. The Leveling Screws Are Provided At The Base. For Gripping The Sample In Position Suitable Grips Are Provided. A Suitable Petrol Engine Is Fitted In The Machine With Cooling Arrangement With Water. The Base Frame Is Also Fitted With Wheels For Ease Of Transportation. Dimension Approx, Are As Under: Height: 1300 Mm Base: 625 X 900 Mm Head Travel On Rack: 500mm Drill Speeds : 900 R.P.M. For Soft Samples And 350 R.P.M. For Hard Samples Water Swivel : Built In The Machines. Accessories:(1) Thin Wall Diamond Bits. (2) Core Barrel. (3) Petrol Engine make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 48 | Providing & Supplying Core Bit 4" made in Germany : make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 49 | Providing & Supplying Core Bit 6" made in Germany : make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 50 | Providing, Supplying, commissioning and demonstration of Absolute Viscometer Bath Zi 4017 or equivalent Specification:This Bath Is Designed And Developed Under The Strict Supervision Of Our Experienced Professionals In Accordance With The International Quality Standards. Our Offered Bath Is Thoroughly Checked On Various Parameters To Ensure Zero-Defect. This Bath Is Widely Used In National Laboratories And Pharmaceutical Industries. Features: •Intelligent Signal Sampling For Accurate Data Measuring And Parameter Reading •Accurate Viscometer For Improving Experimental Efficiency •High Precision Digital Display •Ideal For Controlling The Temperature Accuracy •Durable Glass Bath For Optimum Heat Preservation •Desktop Based All-In-One Design For Easy Operations And Portability •Electric Stirrer For Ensuring Uniform Temperature Of Bath •Easy Cleaning And Drying Of Viscometer Tubes Other INFORMATION: The Accompanying Absolute Kinematic Viscosity Bath Are Utilized To Measure Supreme Thickness Of Consistency Reviewed Clearing Bitumen (Is:73:2006) At 160°C As Per Is:1206 (Part Ii) (Like Astm D 2171), Which Utilizes A Vacuum Slender Viscometer. Complete Absolute Viscosity Testing Equipment Adjusting To Is: 1206 (Part Ii) Method For Testing Tar And Bitumen Materials: |
| 51 | Determination Of Absolute Viscosity With The Accompanying Segments: Consistent Temperature Bath – A Suitable Shower For Drenching Of No Less Than 2 Vacuum Fine Viscometer Tubes With A Computerized Temperature Controller. The PRECISION OF THE TEMPERATURE IN THE SHOWER WILL BE + 0.1OC ALL THROUGH THE SHOWERmake AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 52 | Providing, Supplying, Viscosity Tube For Absolute Viscometer Bath With Calibration Certificate make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 53 | Providing, Supplying, commissioning and demonstration of Flash Point (Closed) Pensky-Martens Apparatus Specification: For Determining The Flash Point Of Fuels Oil And Lubricating Oil, Bitumen Other Than Cutback Bitumen And Suspension Of Solids In Liquids, Having A Flash Point Above 49ºc. make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 54 | Providing, Supplying, commissioning and demonstration of Standard Tar Viscometer Specification: For Determining The Viscosity Of Cut Back Bitumen And Road Oil. The Viscometer Consists Of A Chrome Plated Copper Bath, With A Drain Valve And A Central Tube To Receive The Test Cup And To Position The Stirrer, And Is Mounted On A Stand With Levelling Feet. Stirrer Has A Curved Shield And Is Provided With An Insulated Handle, Thermometer Socket And Swivel Support For The Valve make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 55 | Providing, Supplying, commissioning and demonstration of Temperature Controller With NABLCalibration Certificate Size : 16x12x10” Standards Specification: Double Walled Inner Chamber In Stainless Steel Outer Chamber In Mild Steel Temperature Range Ambient To 100° C Controlled By The Capillary Thermostat. Accuracy ± 2° C, Least Count ±0.1° C.& Fhp Motor Cum Stirrer. Operated On 230v A.C. Single Phase. Heaters Are Provided According To The Size Of The Chamber. A Control Panel In Which The Digital Controller, Switches For Mains, Fhp Stirrer, A Regulator For The Stirrer Is Fit Is By The Side. These Baths Are Suitable For Washing Marshall Specimen. The Lid Is Made Up Of Stainless Steel With A Hole For Glass Thermometer To Penetrate make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 56 | Providing, Supplying, commissioning and demonstration of Tile Abrasion Testing Machine IS 1237 This Is Used For Determination Of Resistance To Wear For Cement Concrete Flooring Tiles. Tiles Specimen Of Size 7.06 Cm X 7.06 Cm Is Pressed Face-Wise Under Specific Load On A Grinding Path And Abrasive Powder Is Evenly Spread On The Rotating Grinding Disc The Second Parallel Side Of The Tile Is Subjected To Wear For Similar Number Of Rotations. The Wear Of The Tile Is Measured On A Thickness Gauge Specifically Made For The Purpose. The Machine Consists Of A Disc Rotating At A Speed Of 30 R.P.M. In A Circular Tray. A Bracket Is Provided To Hold The Specimen. A Counter Balance Lever Loads The Specimen. Load Applied Is 30 Kgf. A Funnel Is Fitted To Evenly Spread Abrasive Powder On The Grinding Path. A Pre-Set Counter Automatically Stops The Machine After 22 Revolutions. This Counter Is Re-Adjustable. The Machine Works On 440 V A.C. Three Phase Electrical Supply. On Request Machine To Operate On 230 V A. C. Supply Can Also Be Suppliedmake AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 57 | Providing, Supplying, commissioning and demonstration of Hot Plate (Rectangular) Rectangular Hot Plate With Outer M.S. Sheet Body Duly Powder Coated Stove Painted To Work On 230 V Ac Supply. Useful For Continuous Heating Up To 300° C. Heavy Duty Cast Iron Top With Heat Resistant Paint. Hot Plate Size Rating 12" X 14" X 6"make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 58 | Providing, Supplying, commissioning and demonstration of Digital Thermometer With NABLCalibration Certificate make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 59 | Providing, Supplying, commissioning and demonstration of Infrared Thermometer With NABLCalibration Certificate make AIMIL/LAWRENCE & MAYO/LYNX/EN KAY/Zeal International Enterprises. |
| 60 | Providing, Supplying, commissioning and demonstration of Electronic Balance Upto 600 Gm Capacity Accuracy 0.01 GmDual Display Battery Cum Electrically Operated With Calibration Certificate. |
| 61 | Providing, Supplying, commissioning and demonstration of Electronic Balance Upto 1000 Gm Capacity Accuracy 0.01 GmDual Display Battery Cum Electrically Operated With Calibration Certificate. |
| 62 | Providing, Supplying, commissioning and demonstration of Electronic Balance Upto 5 Kg Capacity Accuracy 0.1 gm Dual Display Battery Cum Electrically Operated With Calibration Certificate. |
| 63 | Providing, Supplying, commissioning and demonstration of Electronic Balance Upto 30 Kg Capacity Accuracy 2 Gm Dual Display Battery Cum Electrically Operated With Calibration Certificate . |
| 64 | Providing, Supplying, commissioning and demonstration of Electronic Balance Upto 100 Kg Capacity Accuracy 10 Gm Dual Display Battery Cum Electrically Operated With Calibration Certificate. |
| 65 | Providing, Supplying, Zi 4014-A Filter Paper Discs, Set of 25 |
| 66 | Providing, Supplying, commissioning and demonstration of Laboratory Cement Autoclave ZI 1016 or equivallent Standards:IS 4031-1968, IS 1624-1960 & ASTM C 151, C 141 Specification: The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 15.0 cm diameter x 40.5cm height suitable for operation on 230 V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature. |
| 67 | Providing, Supplying, Auto clave mould 282 X25x25 mm as per IS or equviallent make. |
| 68 | Providing, Supplying, ZI 2027A50 mm Plastic ABS Cube Mould |
| 69 | Providing, Supplying, ZI 2027B70.6 mm Plastic ABS Cube Mould |
| 70 | Providing, Supplying, ZI 2024B Cube Mould (Cast Iron - for Mortar) 50mm, Three Gang as per IS or equviallent make. |
| 71 | Providing, Supplying, ZI 2024C Cube Mould (Mild Steel - for Cement) 70.6mm, with Loose Base Plate as per IS or equviallent make. |
| 72 | Providing, Supplying, commissioning and demonstration ofAccelerated curing tank with cooling arrangement ZI 2045B or equvallentStandards:Specification: Curing Tank or Concrete Curing Tank is used for the curing of concrete samples for at least 8 hours. The purpose of curing is to ensure that all concrete samples are similar with regards to quality and strength.24 Hour cycle from time of mixing. Controlled 35° C or 100° C ± 2° C Curing Temperature for concrete. Controlled 27° C ± 2° C Curing Temperature for grey cement. This curing tank has been designed to accommodate 150mm / 70.6mm cube moulds and upto 12/24cube mould can be cured in one go. The tank is fully insulated, comes complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allows free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35° C or 100° C ± 2° C / 27° C +2° C,expect for the 15 minutes after immersion of the freshly made specimens. Accelerated curing tank with cooling arrangement is also available. |
| 73 | Providing, Supplying, commissioning of FRIDGE 407L 3 Star Frost-Free Digital Inverter Double Door RefrigeratorConvertibleof make Samsung/LG/Whirlfool etc |
| 74 | Carriage of Materials from Chennai Port to Port Blair Central Lab (As the quottation given by Zeal Internatiol up to Chennai Port) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
