Tender For Construction Of R.I. Office Cum Residence Building At Chandama Under Vyasanagar Tahasil In The District Of Jajpur For The Year 2022-23.
Tender Value
1.34 Crore
Estimated cost
Bid Submission
20 Jan 2023
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panikoili → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of R.I. Office Cum Residence Building At Chandama Under Vyasanagar Tahasil In The District Of Jajpur For The Year 2022-23. Building Work
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS(PART-I) Earth work in excavation of foundation in all kinds of soil including dressing and levelling the beds within 50m. initial lead and 1.5m. initial lift with cost, conveyance, taxes as per specification and directionof Engineer in charge |
| 2 | Filling foundation and plinth with good quality river sand with watering and ramming incluing cost, conveyane, cost of all materials and labour etc complete as per direction and specification of Engineer in charge |
| 3 | Cement concrete (1:3:6) in foundation and plinth using 4cmsize hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge |
| 4 | Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation and Plinthand for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties ofmaterials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge.Ground floor |
| 5 | Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure and Plinthand for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties ofmaterials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge.Compound wall |
| 6 | Ground floor |
| 7 | 1st floor |
| 8 | 2nd floor |
| 9 | 3rd floor |
| 10 | Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:4) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties ofmaterials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge.1st floor |
| 11 | 2nd floor |
| 12 | RCC work ofM-25 grade with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Column base and Grade Beam |
| 13 | Column and Beam GF |
| 14 | 1st floor |
| 15 | 2nd floor |
| 16 | 3rd floor |
| 17 | StaircaseGF |
| 18 | 1st floor |
| 19 | 2nd floor |
| 20 | Lintel GF |
| 21 | 1st floor |
| 22 | 2nd floor |
| 23 | Chajja, Fins and Parapet GF |
| 24 | 1st floor |
| 25 | 2nd floor |
| 26 | 3rd floor |
| 27 | Window sill bendCompound wall and plinth bend |
| 28 | 1st floor |
| 29 | 2nd floor |
| 30 | Roof slab GF |
| 31 | 1st floor |
| 32 | 2nd floor |
| 33 | 3rd floor |
| 34 | Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL includingbending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Compound wall |
| 35 | Ground floor |
| 36 | 1st floor |
| 37 | 2nd floor |
| 38 | 3rd floor |
| 39 | Supplying, fitting & fixing in all floors of M.S doors and windows with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost M.S.Door |
| 40 | M.S.Window |
| 41 | Fixed Grill |
| 42 | Providing 6mm thick cement plaster in cement mortar (1:4) in all floors finished smooth to inside RCCsurface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties ofmaterials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-chargeGF |
| 43 | 1st floor |
| 44 | 2nd floor |
| 45 | 3rd floor |
| 46 | Providing 20mm thick grading plaster of C.M.(1:4) over roof slab including watering, curing withcost, conveyances, taxes of all materials, cost of all labour, T&P required for the work etc. complete as per direction of Engineer-in-charge FF |
| 47 | 2nd floor |
| 48 | 3rd floor |
| 49 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outsidesurface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties ofmaterials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor) |
| 50 | 1st floor |
| 51 | 2nd floor |
| 52 | 3rd floor |
| 53 | Providing 16mm thick cement plaster in cement mortar (1:6)finished smooth to outsidesurfaceofwalls scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties ofmaterials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Compound wall) |
| 54 | Ground floor |
| 55 | 1st floor |
| 56 | 2nd floor |
| 57 | 3rd floor |
| 58 | Providingfitting and fixing of Vitrified tiles in floors treads of steps and landing of size (600x600mm) (plain)over 20mm thick bed of cement mortar(1:4)jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royaltiesofmaterials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF |
| 59 | 1st floor |
| 60 | 2nd floor |
| 61 | Providingfitting and fixing of Ceramic glazed tiles on dados of 300x200mmof approved sizeover 12mm thick bed of cement mortar(1:3)jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royaltiesofmaterials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF |
| 62 | 1st floor |
| 63 | 2nd floor |
| 64 | Providingfitting and fixing of Chequered tiles in floors of approved makeof size (300x300)mm confirming to IS:4457 over 25mm thick bed of cement mortar(1:1)jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royaltiesofmaterials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF |
| 65 | 1st floor |
| 66 | Priming one coat (Water bound) over plastered surface of approved make and finished smooth and even surface to receive paintingincluding cost of scaffolding staging charges, conveyance, taxes of all materials and cost of all labour with TandP etc complete as per specification and direction of Engineer in charge GF |
| 67 | 1st floor |
| 68 | 2nd floor |
| 69 | 3rd floor |
| 70 | Distempering two coatswith any approved shade and quality with oil bound distemper in interior surface of walls up to any height & in all floors to give an even shade including cost, conveyance, taxes of all materials with labour, T&P required for the work complete in all respect as per direction of the Engineer-in-charge GF |
| 71 | 1st floor |
| 72 | 2nd floor |
| 73 | 3rd floor |
| 74 | Painting two coats with anti-fungal resistance Weather Seal Coatof approved shade upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge (outside wall) GF |
| 75 | 1st floor |
| 76 | 2nd floor |
| 77 | 3rd floor |
| 78 | Painting two coats with anti-fungal resistance Weather Seal Coatover a coat of primer of approved shade upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge (outside wall) Compound wall |
| 79 | Cement washing one coat over plaster surface of approved quality of walls upto any heightto give an even shade including cost, conveyance, taxes of all materials and labour, scaffolding charges to required height with T&P required for the work complete in all respect as per the direction of Engineer-in-charge Compound wall |
| 80 | Painting two coats with approved Synthetic enamel paints of approved colour, shade over a coat of primer in iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge GF |
| 81 | 1st floor |
| 82 | 2nd floor |
| 83 | 3rd floor |
| 84 | Providing, Fitting & Fixing of Stainless steel of 304 grade in hand railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete and as per specification & direction of Engineer-in-charge. In all floors |
| 85 | Providing and fitting RCC Jally of 2.5cm to 5cm thick to Ventilator including cost of all labour,T&P completed as per specification and direction of the Engineer-In-charge |
| 86 | Cement concrete (1:2:4) in foundation and plinth using 12mm size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge |
| 87 | Cement concrete (1:1.5:3) in foundation and plinth using 20mm and down graded chips of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge |
| 88 | E.I. Works:-Recessed wiringto light point/ fan point/Call bell point with 1.5sqmm FR PVC Insulated single core multistarand copperConductorof ISI marked with 20mm dia non metalic PVC flexible conduct with 6AmpsModularswitch socket & 1.5sqmm FRLS PVC Single core multistrand copper conductor as earth wire including allaccessories and connection as per direction of Engineer in charge (Make-Finolex / L&T/ Havells )-do-light pointGroup-A |
| 89 | -do-light pointGroup-B |
| 90 | -do-light pointGroup-C |
| 91 | -do-Fan pointGroup-B |
| 92 | -do- Fan pointGroup-C |
| 93 | -do-Call Bell pointGroup-C |
| 94 | Supply and fixing of modular metal box 150x75x60mm deep on surface with laminated cover for fixing 5/6Amps modular switch & socket etc as per direction of Engineer-in-charge.Make-Legrand / Anchor/ Havells ) |
| 95 | Supply and fixing of 5/6Amps Modular socket on existing board.Make-Legrand / Anchor/ Havells ) |
| 96 | Supply and fixing ofmodularmetal Box of 180mm x100 X 60 mm nominal size in recess with modular fixing of 5 pin,15/16 Amp modular type switchsocket , ISI marked connection painting etc as required complete in all respect as per direction of Engineer in charge(Make- Legrand / Anchor/ Havells) |
| 97 | Supply and fixing of3 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch on Modular G.I. Box with Modular base & cover.Make-Legrand / Anchor/ Havells |
| 98 | Recessed wiring to submain in the following insulated single core multistrand copper conductor of ISI markedin the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required complete in all respect as per direction of Engineer-in-charge.(Make of wire-Finolex/L&T/Havells)2x1.5 sqmm +1x1.5 sqmm |
| 99 | 2x2.5 sqmm +1x1.5 sqmm (MCB box to switch board & street light) |
| 100 | 2x4 sq mm+1x1.5 sqmmfor AC Connection |
| 101 | 2x6 sq mm+1x2.5 sqmm(Distribution boardtoMCB Box) |
| 102 | Supply and fixing of Ding Dong(call Bell).Make-Anchor/Cona |
| 103 | Supply and fixing of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose completein all respect as per direction of Engineer in charge (Make : Cona / Anchore) |
| 104 | S/F of 1x1.5sqmm pvc wire for Inverter wiring. |
| 105 | Supply and fixing Earthing with copper earth plate 600 mm X 600 mm X 3.15 mm thick ISI marked including accessoriesas required. |
| 106 | Extra for using salt & charcoal for Earthing. |
| 107 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal & salt. |
| 108 | Providing and fixing 8 SWG (4 mm) dia copper wire on surfae or in recess for loop earthing along with existing surface / recessed conduit / submain wiring /cable as required. |
| 109 | Supply and fixing of followingMCB distribution board 250V on recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Make-siemens/ Legrand/schnider12way Double door |
| 110 | Supply and fixing of following MCB \"C\" series suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc (Make- siemens/ Legrand/schnider ) 6/10Amps single pole MCB. |
| 111 | 32Amps double pole MCB. |
| 112 | 63Amps double pole MCB. |
| 113 | SITC of Energy efficient 1x30watt LED Tube light fitting withcomplete with as per direction of Engineer-in-charge.Make- Philips/Bajaj |
| 114 | Supply and fixing of 9watt LED lamp.Make-Havells/Philips |
| 115 | Supply and fixing of 90watt 5700K LED asymmetric optic (ISI marked) street light versatile diacast alluminiumIP66 roadway luminair with high power LEDs as light source and electronic driver with heavy duty GI bracket 36mm dia and required length complete with all connnection testing and commissioning etc as required as per direction of Engineer-incharge (Make:Bajaj / Philips / Crompton) |
| 116 | Supply and fixing of 18watt round type LED Celling light size-8\"x8\" with complete.(Make:Bajaj / Philips / Crompton) |
| 117 | Supply and fixing of 18watt LED IP-65 Bulk head luminaries with opal difuser ISI marked complete with all respect as per direction of Engineer in-charge at the staircase top entrance.Make- Bajaj/Philips/Crompton |
| 118 | Supply and fixing of 22watt LED Type Gate light(Rubby model) with complete.Make-Havells |
| 119 | Supply and fixing of MS Jalli for Gate light. |
| 120 | S/Fof 1200mm sweep white/milky colour ceiling fanISI Marked with regulatorincludingconnection complete in all respect as per direction of Engineer in charge (Havells ss-390/Usha striker/Orient PSPO) |
| 121 | Supply and fixing of heavy duty type Extra fan down rod 24x3cm |
| 122 | Supply and fixing of 12 inchHeavy duty (Metalic Colour)Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge(Make Almonar/Khaitan,V-guard) |
| 123 | Supply and fixing of 450mm Wall mounting fan with complete.Make-V-Guard/Polycap/Havells |
| 124 | Supply and fixing of 32Amps FTDP on a suitable board for street light control.Make-Anchor/Cona |
| 125 | Supply & Installationof A.C. starter modular type,L&T/Siemens make with overload relay 9-14Amps fited with suitable box as per direction of Engineer-in-charge. |
| 126 | Supply, Installation,testing & commissioning of Indoor type distribution panel board consists of 125Amps 4pole MCCB-01no,125Amps 4pole changeover switch-01no,3nos 63Amps double pole MCB & 2nos 16Amps double pole MCBwith digital display meter & rubber mat withcomplete as per direction of Engineer-in charge.Make-Legrand/L&T/Schinder |
| 127 | Supplyof 95sqmm 3.5core Allum Armoud cable for main supply.Make-Polycap/Havells/KEI |
| 128 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required. |
| 129 | Supply and fixing of 50mm dia HDPE Pipe for laying of cable. |
| 130 | Supply,Installation,Testing & commissioning of of 2.0KVA Microtech Inverter with 02nos 220AH Exide make battery with stand as per direction of Engineer-in-charge. |
| 131 | P.H. Works:-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipesconforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brassthreaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Jointsall complete as per specification and direction of the Engineer in charge.20mm dia CPVC Pipe In first Floor 20mm dia C- PVC pipe |
| 132 | 25mm dia C-PVC pipe |
| 133 | 32mm dia C-PVC Pipe |
| 134 | In 2nd floor20mm dia C- PVC pipe |
| 135 | 25mm dia C-PVC pipe |
| 136 | 32mm dia C-PVC Pipe |
| 137 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipesconforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge.In ground floor 32mm dia PVC ASTM pipe (sch-80) |
| 138 | In first Floor25mm dia PVC ASTM pipe (sch-80) |
| 139 | 32mm dia PVC ASTM pipe (sch-80) |
| 140 | In 2nd floor25mm dia PVC ASTM pipe (sch-80) |
| 141 | 32mm dia PVC ASTM pipe (sch-80) |
| 142 | In 3rd floor32mm dia PVC ASTMpipe(sch-80) |
| 143 | 50 mm dia PVC ASTM pipe (sch-80) |
| 144 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. First floor 250mmthick wall |
| 145 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of theEngineer in charge.In Firstfloor |
| 146 | Supplying allmaterials, labour, T&P and cutting grooves in pucca floors and walls for takingGI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In firstfloor |
| 147 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP two way bib cock (Con-CHR-041KN Jaquar make) |
| 148 | 15mm dia C.P. Health foucet(ALD-CHR-573 Jaquar make) |
| 149 | 15 mm dia CP long body Bib cock(Con-CHR-107KN Jaquar make) |
| 150 | 15mm dia CP angle stop cock(Con -CHR-053KN Jaquar make) |
| 151 | 20mm dia CP concealed stop cock(CON-CHR-083KN Jaquar)Make |
| 152 | 15mm dia C.P. bottle trap ALD-CHR-769L300X190 Jaquar make |
| 153 | 25mm dia Brass full way valve (ShaktiMake) |
| 154 | 32mm dia Brass full way valve (ShaktiMake) |
| 155 | 50mm dia Brass full way Valve ( Shakti make ) |
| 156 | 15mm dia CP flange |
| 157 | 15mm dia CP extension piece |
| 158 | Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge 15mm dia CP revolving shower ( Plaza make ) |
| 159 | Supplying all materials, labour, T&P and fitting and fixing10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge .10 litres capacity pvc low level cistern with 32mm dia CP long flush bendSlimline white |
| 160 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering,watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge.On the roof of 2nd floor 1000 litre capacity water storage tanks |
| 161 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricantby non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In ground floor .110mm dia U-PVC SWR pipe(Ashirbad / Supreeme ) |
| 162 | 75mm dia U-PVC SWR pipe(Ashirbad / Supreeme ) |
| 163 | 110mm U-PVC door tee |
| 164 | 110mm U-PVC door bend |
| 165 | 110mm U-PVC plain bend |
| 166 | 110mm U-PVC Plain tee |
| 167 | 110mm dia U-PVC \"P\" trap |
| 168 | 110mm dia U-PVC Plain Shoe Bend |
| 169 | 110mm dia U-PVC offset with out ear |
| 170 | 75mm dia U-PVC Plain Bend |
| 171 | 75mm dia U-PVC single Equal Plain tee |
| 172 | 110mm dia U-PVC cowl |
| 173 | 125mm dia CP grating |
| 174 | 110mm dia PVC SWR Clamp/ clip |
| 175 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all completeas per PH specification and direction of the Engineer in charge 250mm to 375mmthick wall |
| 176 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge. |
| 177 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge .580mm size Orissa pan (Parryware / Nycer make ) |
| 178 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.European water closet with ‘S’ trap plain (Parryware / Nycer make ) |
| 179 | Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge.Stall urinal (Parryware /Hindware make ) |
| 180 | 15mm dia urinal spreader |
| 181 | 32mm dia C.P. dome waste |
| 182 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge .600x450x250 mm stainless Steelkitchen sink-glossy-IS: 13983-1994(jayna make ) |
| 183 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste,etc all complete as per specification and direction of the Engineer in charge. 550mmx400mm size wash hand basin with porcelain pedestalParryware/ Hind ware /Neyser make ) |
| 184 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5mm thickon 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge . 600mmx450mm size B.E mirror x minimum 5mm thick(Alpina make ) |
| 185 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge Acrylicglass shelf with CP guard rails |
| 186 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 187 | C.P. Ring Towel Rail |
| 188 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder |
| 189 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floorInIst floor |
| 190 | In 2nd floor |
| 191 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In fst floor |
| 192 | In 2nd floor |
| 193 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning for skirting including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge InIst floor |
| 194 | In 2nd floor |
| 195 | Supplying all materials, labour, T&P and filling in sunken floor in toilets with cinter (light weight slag) well watered and rammed include conveyance of all materials to worksite payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In First floor |
| 196 | In 2nd floor |
| 197 | Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1\"6\" in wall including cleaning,applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge.In First floor |
| 198 | In 2nd floor |
| 199 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. 30 cm. x 30 cm. Kajaria / Somany / Johnson to be pree approved .In ground floor |
| 200 | In 2nd floor |
| 201 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.45cm. x 30cm. Kajaria / Somany / Johnson to be pree approvedInIst floor |
| 202 | In 2nd floor |
| 203 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make) |
| 204 | EXTERNAL P.H. WORK Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia |
| 205 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm |
| 206 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ashbrickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm |
| 207 | ---- do --- addl depth of 0.15m upto 0.90m |
| 208 | R.C.P.C.Manhole Cover |
| 209 | Supplying all materials ,labour ,T&P and constructing Man Hole Chamber ofinside size 910mmx910mmx910mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken black hard granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite, payment of royalty, taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-chargeInside size : 910mmx910mmx910mm |
| 210 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.40m dia x 2.00m deep soakway pit |
| 211 | Construction of 30 users RCCseptic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of theEngineer-in-Charge. |
| 212 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 213 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 214 | Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge |
| 215 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeR.C.C floor and roof slabs up to 4.30m height |
| 216 | RCC beam,Column, girders and bressmer etc |
| 217 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 218 | Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 219 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 220 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 221 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 222 | Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 223 | Supplying all materials, labour, T&P and fitting and fixing H.C.I soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge110mm diameter U-PVC SWR pipe |
| 224 | 110mm dia U-PVC Plain shoe bend |
| 225 | 110mm dia U-PVC Cowl |
| 226 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge. |
| 227 | Sinking of 150mm x 125mm size borewell through D.T.H or Combination drilling rigs in hard rock areas with GI/PVC casing pipes . 1no. Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650 cfm/ 200 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 125 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). 1 x 120 |
| 228 | Lowering the following size of G.I/P.V.C pipes with or without slotted pipes as per the necessity from ground level up to 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.Lowering of 150 mm dia P.V.C casing pipes00 mtr to 40 mtrs |
| 229 | Cost of150 mm dia ASTMD-1785/89 sch-80 pvc pipe 1x 60.00 |
| 230 | Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. |
| 231 | Supplying all materials, labour, T&P and constructingBore well protectionchamber of the inside size 650x650x1000hightwith cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ashbrickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4)inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. |
| 232 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge1 .0 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm |
| 233 | 2.0 HP Horizontal submerssible pump motor |
| 234 | DOL Control panel |
| 235 | 40mm dia steel short piece |
| 236 | Well cap |
| 237 | 50mm size CI bracket |
| 238 | 2.50sqmm flat cable |
| 239 | 20mm dia rigid UPVC pipes |
| 240 | Steel rope with cover |
| 241 | 40mm dia HDPE pipe |
| 242 | Labour charges for lowering including transportation |
| 243 | Construction of 10,000 Liters RCC Under ground ReserviorEarth work in All kinds of soil and gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50m initiallead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification approved by the Department. |
| 244 | -do- with Ist additional depth of 1.50 m over the initial lead and lift |
| 245 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer incharge. |
| 246 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 247 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 248 | Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. |
| 249 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. RCC floor roof, chajja etc |
| 250 | RCC Beam, Column, wall etc |
| 251 | RCC Plinth bend/ Raft |
| 252 | Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) overCC workincluding watering curring and conveyance of all materialsto site. |
| 253 | Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site. |
| 254 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 255 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
AI Tender Summary
Tender Timeline
Jan 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender