Military Engineer Services-MES has published Tender For Addn / Altn Cum Special Repair To Certain Otm Accn At Gopalpur Mil Stn. Submission Date for this Tender is 22-02-2023. Coats and Jackets Tenders in gopalpur Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Jan-2023 | CORRIGENDUM NO 01 | Date | 09-02-2023 |
| 2 | 31-Jan-2023 | Corrigendum No 03 | Date | 15-02-2023 |
| 3 | 31-Jan-2023 | Corrigendum No 02 | BOQ | 15-02-2023 |
| 4 | 15-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-02-2023 |
| Sl. No. | Item Description |
| 1 | SCHEDULE "A": |
| 2 | Item No. 01 :- Demolition of cement concrete(unreinforced) in ground floor or paving not exc 15 cm thick(below or above Ground Level) complete all as specified and directed. |
| 3 | Item No. 02 :- Demolition of unreinforced cement concrete in ground floor, paving and sunken floor exc 15 cm thick complete all as specified and directed. |
| 4 | Item No 03 :- Dismantling floor, hearth or wall/roof tiles including cement mortar bedding (but not backing) and rubbish off the permises complete all as specified and directed. |
| 5 | Item No 04 :- Demolition of reinforcement cement concrete above ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed. |
| 6 | Item No 05 : Post construction Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 7 | Item No 06 : All as per item No. 05 above but along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 8 | Item No 07 : Post construction Anti termite Treatment for switch boards including removing the cover carefully and inserting adequate amount of chemical (powder) and closing the cover complete all as specified and directed. |
| 9 | Item No 08 : M&L for 8-9 mm thick Light shade coloured designer double charged vifrified ceramic tiles, not exceeding 0.36sqm, in floors etc over and including 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 10 | Item No 09 : M&L for 8-9 mm thick Light shade coloured designer double charged vifrified ceramic tiles, not exceeding 0.36sqm in vertical surface such as skirtings, dados etc over and including 10mm thick rendering in Cm 1:4 set & jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 11 | Item No 10 :- M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc over and including 15mmthick screed bed in cement Mortar 1:6 set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed. |
| 12 | Item No 11 :- M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors etc over and including 15mmthick screed bed in cement Mortar 1:6 set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed. |
| 13 | Item No 12 :-BLANK |
| 14 | Item No.13:- M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring,surface finished even and rough to receive the topping layer complete all as specified and directed. |
| 15 | Item No.14:- M&LPrepolished (mirror finish) Machine cut kota stone slab flooring 18-20 mm thick(size of stone not less than 0.32 SQM each) over and including 20 mm thick screed bed in cement mortar 1:4 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing & rounding to edges complete all as specified and direct (Kota stone should be single piece in tread and riser). |
| 16 | Item No.15:- M&LPrepolished (mirror finish) Machine cut kota stone slab flooring 18-20 mm thick as in risers, steps & skirting, over and including 10 mm thick screed bed in cement mortar 1:4 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing & rounding to edges complete all as specified and direct (Kota stone should be single piece in tread and riser). |
| 17 | Item No.16:- M&Lfor glazed ceramic coloured tiles 350x250x7mm/450 x 300 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and direct. Note- The size of tiles (except thickness) may be varied during execution without any price adjustment |
| 18 | Item No 17 :-BLANK |
| 19 | Item No 18 :- Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 20 | Item No. 19 :- M&L Brick work using old size sub class "B" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 21 | Item No. 20 :- M&L Brick work using old size sub class "B" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed. |
| 22 | Item No 21:- M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling, mass concrete or in sub base complete all as specified and directed. |
| 23 | Item No. 22 :- M & L 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded aggregate as in plinth protection finish even & smooth without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling compreising of one part of heated bitumen 80/100 gde and three part of sand (all by weight) complete all as specified and directed. |
| 24 | Item No 23 :- M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 25 | Item No 24 :- M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab, chajjas, shelves and similar work including necessary form work and set in CM 1:4 complete all as specified and directed. |
| 26 | Item No 25 :.Taking down cement plaster any description on brick or stone walls, ceiling/roof etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 27 | Item No 26 :- M&L for rendering 10mm thick in CM 1:6 on fair faces of brick workor concrete surfaceof wall finish even and smooth with out using extra cement complete all as specified and directed |
| 28 | Item No 27 :- M&L for rendering 15 mm thick in cement mortar 1:4 in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer"s instructions and finished the surfaces even and fair without using extra cement of approved makes complete all as specified and directed. |
| 29 | Item No 28 :- M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth without using extra cement complete all as specified and directed . |
| 30 | Item No 29 :- M&L for rendering 15mm thick in CM 1:6 on fair faces of brick workor concrete surfaceof wall in isolated width exc 15cm but not exc. 30cm and finished even and smooth without using extra cement complete all as specified and directed |
| 31 | Item No 30- Supply only liquid water proofing compound, ISI marked omplete all as specified and directed. |
| 32 | Item No 31- Taking down chowkats or frames with shutters not exc 1.5 Sqm each(with out taking off shutters from the frames) incl making good the disturbed portion complete all as specified and directed. |
| 33 | Item No 32 :- Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) incl making good the disturbedportion complete all as specified and directed. |
| 34 | Item No 33 :- Taking down shutters of any description not exc 1.00 Sqm each complete all as specified and directed. |
| 35 | Item No 33A :- Taking down shutters of any descriptionexc 1.00 Sqm but n.exc 2sqmm each complete all as specified and directed. |
| 36 | Item No 34 :- Taking down and refixing in the same opening shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm each after easing & adjusting complete all as specified and directed. |
| 37 | Item No 35 : M&L Second class hard wood(SAL) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 38 | Item No 36 : Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor for inserting hold fasts and makinggood dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as requiredcomplete all as specified and directed. |
| 39 | Item No. 37 :- M&L Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. |
| 40 | Item No 38 :- S&F35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 41 | Item No 39 : S&F factory made UPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3 mm (+0.2mm ). Window profile with hollow section with multi chamber, Frame (88 mm x 52 mm ), sliding sash (42 mm x 67 mm), sliding mesh sash (42mm x 57mm), sliding interlock (one vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5 mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (30 mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: (Touch Lock of Zinc alloyed (white powder coated), steel roller system, Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories.) (Note: The unit rate quoted by contractor shall include cost of glass and all other connected accessories) Area not exc. 2.00 SQM each |
| 42 | Item No 40 : S&F factory made UPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3 mm (+0.2mm ). Window profile with hollow section with multi chamber, Frame (60 mm x 58 mm ), sliding sash (60 mm x 73 mm), T- profile (one vertical length in two shutters) (60mm x 74mm), Glazing bead (35 mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (28 mm x 21.5 mm) sash (31mm x 27.5mm), T-profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: (casement door handle made of zinc alloyed(white powder coated), steel roller system, Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories.) (Note: The unit rate quoted by contractor shall include cost of glass and all other connected accessories) |
| 43 | Item No.41 :- S&F 7 mm thick aluminium grills of make"Decograill" model DG 104 surrounded by aluminium "C" channel with mesh size 99 x 105mm complete all as specified and directed. |
| 44 | Item No.42 :- S&F factory made uPVC white colour fixedwindows/ventilator made of extruded profile with wall thickness of 2.3 mm (+-2mm)Window profile with hollow section with multi chamber, Frame (60mm x 58mm). T profile (one vertical length in between two shutters) (60mm x 74mm). Glazed bead (35mm x 20mm) will be mitered cut and fusion selded at all corners including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 +-0.2mm thick glavanised steelframe (28mm x 21.5mm ). T profile (27mm x 17mm) to be inserted in repair profile. Frame will be fixed to the wall with 8mm x 100mm long fasteners. 5.5 mm thick glazing with ordinary quality glass and gauge as required at site. (Note: The unit rate includes the cost of glass, gauge and all other connected accessories) area n. exc 1.00 sqm each. |
| 45 | Item No. 43:- M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk waysrailings frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 46 | Item No. 44:- Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 47 | Item No 45 :S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to woodtrusses or rafters, cooler stands and similar small articles conforming to Fe 410 - 0 or Fe310-0 complete all as specified and directed. |
| 48 | Item No 46 : S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening complete all as specified and directed |
| 49 | Item No 47 :S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified anddirected |
| 50 | Item No 48 :M&L butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 for 100 mm long complete all as specified and directed. |
| 51 | Item No 49 :-BLANK |
| 52 | Item No 50 :S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt complete all as specified and directed. |
| 53 | Item No. 51 :- S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 54 | Item No 52 :S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate fixed to any type of frame complete all as specified and directed. |
| 55 | Item No. 53 :- S&F aluminium, anodised, barrel tower bolts of extruded section 100 mm long complete all as specified and directed. |
| 56 | Item No 54 :S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed. |
| 57 | Item No 55 :S&F extruded aluminium alloy handles fabricated type anodised of 100 mm size complete all as specified and directed. |
| 58 | Item No. 56 :- S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed. |
| 59 | Item No 57 :S&F Aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 60 | Item No. 58 :- S&F in repairs 18/19 mm thick high density PVC / WPC solid fibre board with prelaminated PVC sheet as kitchen cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed. |
| 61 | Item No. 59 :- S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 62 | Item No 60 :-BLANK |
| 63 | Item No. 61 :- S & F Continuous (piano) hinges, of brass, bright finish or electrogalvanised Width of flaps (when open) 40 mm complete all as specified and directed. |
| 64 | Item No. 62 :- S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed. |
| 65 | Item No. 63 :- S&F in repair of stainless steel kitchen plate rack of size 750x750x250mm complete all as specified and directed. |
| 66 | Item No. 64 :- S & F in repair Stainless steel fancy type curtain rod 25 mm dia including end globe/ mountings as approved complete all as specified and directed. |
| 67 | Item No. 65:- S&F SS curtain rod Bracket fancy type for curtain rod 25 mm dia of any colour as approved complete all as specified and directed. |
| 68 | Item No. 66 :- Taking up or down steel tubing and connections including cleaning if refixingrequired for 15 mm bore of pipe complete all as specified and directed. |
| 69 | Item No. 67 :- Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed. |
| 70 | Item No. 68 :- Taking up or down steel tubing and connections including cleaning if refixing required for 25 mm bore of pipe complete all as specified and directed. |
| 71 | Item No. 69 :- M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves,lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good in brick walls, cutting not exceeding 10 cm girthcomplete all as specified and directed. |
| 72 | Item No. 70 :- Supply & laying 20mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 73 | Item No. 71 :- Supply & laying 25mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 74 | Item No. 72:- Supply & laying 32mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 75 | Item No. 73 :- S&F15mm bore chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses of approved makes complete all as specified and directed. |
| 76 | Item No. 74 :- S&F in repair chromium plated wall mixer 3- in - 1 system with provision of both hand shower and overhead shower complete with 115mm long bond pipe, connecting legs and wall flange (with hand shower) of approved makes complete all as specified and directed. |
| 77 | Item No. 75 :- S&F in repairs Counter Wash hand basin fixed on Granite/Marble or other appropriate top coloured including chromium plated waste coupling and PVC connection complete all as specified and directed.(Make: Hindware or equivalent) |
| 78 | Item No. 76 :- S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc. complete all as specified and directed. |
| 79 | Item No. 77 :- S&F LDPE pipe 50 mm of pressure rating 6kgf/sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 80 | Item No. 78 :- S&F in repair white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe of approved makes complete all as specified and directed. |
| 81 | Item No. 79 :- S&F in repair vitreous china squating pan "Orissa" pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed. |
| 82 | Item No. 80 :- S&F in repair 10 litres capacityPVC valveless, syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, incl bracker and flush pipe of low level of 32 mm dia fixed to wall of approved makes complete all as specified and directed. |
| 83 | Item No. 81 :- S&F in repair chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and as directed. |
| 84 | Item No. 82 :- S&F PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed. Make: Prayag |
| 85 | Item No. 83 :- S & F cabinet mirror, box type of size 350x450mm of selected colour as approved fixed to wass of approved makes complete all as specified and directed. |
| 86 | Item No. 84:- S&F in repair 5mm thick looking mirror 600 x 450 mm selected quality glass mounted on 6 mm thick commercial plywood, with aluminium beading and fixed to wall with brass screws, cups and washers complete as specified and directed. |
| 87 | Item No. 85 :- S&F in repair bib tap 15 mm bore, chromium plated,with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 88 | Item No. 86 :- S& F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and as directed. |
| 89 | Item No. 87:- S& F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and as directed. |
| 90 | Item No. 88 :- S&F in repair angle cock 15 mm bore fancy type chromium plated,with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 91 | Item No. 89 :- S& F in repair CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule of approved makes complete all as specified and as directed. |
| 92 | Item No. 90 :- S&F in repair of stainless steel soap dish, of standard size and shape of approved makes complete all as specified and as directed. (Make - Hindware or equivalent) |
| 93 | Item No. 91 :- S&F in repair chromium plated toilet paper holder with flap complete all as specified and as directed. |
| 94 | Item No. 92 :- S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm of approved makes complete all as specified and as directed. |
| 95 | Item No.93 :- S&F in repair chromium plated shower rose 125 mm size with CP arm 300mm long with swivel joint fixed to pipe etc complete all as specified and directed. |
| 96 | Item No. 94 :- S&F in repair Plastic water closet seat cover white/cream colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 97 | Item No. 95 :- S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing60cm long complete all as specified and as directed. |
| 98 | Item No 96:-M&L for 18 mm thick granite(of any type) work (table rubbed and polished) in cooking platforms, steps, cills and like incl edge moulding and cutting holes for gas pipe fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 99 | Item No. 97 :- S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips. complete all as specified and directed. |
| 100 | Item No. 98 :- Taking down AC/PVC pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 101 | Item No. 99:- S&F PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed. |
| 102 | Item No. 100 :- S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 103 | Item No. 101 :- S&F for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed. |
| 104 | Item No. 102 :- S&FPVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 105 | Item No. 103 :- S&F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 110 mm bore of pipe complete all as specified and directed. |
| 106 | Item No. 104:- S&F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed. |
| 107 | Item No. 105 :- S&F PVC (SWR) bends any radius of 110 mm borewithout access door complete all as specified and directed. |
| 108 | Item No. 106 :- S&F PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as specified and directed. |
| 109 | Item No 107:-S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed |
| 110 | Item No. 108 :- S&F PVC (SWR) bends any radius of 75 mm borewithaccess door complete all as specified and directed. |
| 111 | Item No. 109 :- S&F PVC (SWR) branch pleces, single (equal or un equal) ordinary or inverted (spigot or socket type) or with parraled branches of 110 mm dia with access door complete all as specified and directed. |
| 112 | Item No. 110 :- S&F PVC (SWR) branch pleces, single (equal or un equal) ordinary or inverted (spigot or socket type) or with parraled branches of 75 mm bore with access door complete all as specified and directed. |
| 113 | Item No. 111:- S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. |
| 114 | Item No. 112:- S&F PVC (SWR) floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed |
| 115 | Item No. 113 :- S&F PVC (SWR) "P" trap for 110 mm dia etc complete all as specified and directed |
| 116 | Item No. 114 :- Dismantling water tanks of any description, capacity exc 250 and not exc 500 litres and removing from site complete all as specified and directed. |
| 117 | Item No. 115 :- Dismantling water tanks of any description, capacity exc 500 and not exc 1000 litres and removing from site complete all as specified and directed. |
| 118 | Item No. 116 :- S & Frotational moulded polyethylenewater storage tank in white colour triple layer(cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position as per SSR Part-I complete all as specified and directed. |
| 119 | Item No. 117 :- S & Frotational moulded polyethylenewater storage tank in white colour triple layer(cylindrical vertical with closed top)1000 litre capacity hoisted and fixed in positionas per SSR Part-Icomplete all as specified and directed. |
| 120 | Item No. 118 :- S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed. |
| 121 | Item No. 119 :- S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both, screwed both ends for iron pipe complete all as specified and directed. |
| 122 | Item No. 120 :- S&F in repairs Gun metal, globe or gate valve with iron wheel head, 25 mm bore, screwed both, screwed both ends for iron pipe complete all as specified and directed. |
| 123 | Item No 121 :-M&L for preparation of new surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 124 | Item No. 122 :- M&L for preparationof new surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 125 | Item No 123 :-Removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete all as specified and directed. |
| 126 | Item No. 124 :- M&L for preparation of old surfaces wooden based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint complete all as specified and directed. |
| 127 | Item No. 125 :- M&L for preparationof old surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint complete all as specified and directed. |
| 128 | Item No. 126 :- M&L for applying 1.5mm to 2mm thick birla / Jk Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 129 | Item No. 127 :- M&L for preparation of newly plastered surfaces of wall & concrete and applying 1.5mm to 2 mm thick JK/Birla wall care putty in two layers including preparation complete all as specified and directed. |
| 130 | Item No. 128 :- M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including rubbing with sand paper complete all as specified and directed. |
| 131 | Item No. 129 :- M&L for applying 1.5mm to 2 mm thick birla / Jk Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 132 | Item No. 130 :- M&L for preparation of newly plastered surfaces of ceiling and applying 1.5mm to 2 mm thick wall care putty including preparation of surface complete all as specified and directed. |
| 133 | Item No. 131 :- M&L applying two coats of oil bound distemperover a coat of primer on prepared surface of ceiling and complete all as specified and directed. |
| 134 | Item No. 132 :- M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying two coats of white wash complete all as specified and directed. |
| 135 | Item No. 133 :- M&L for preparation of old decorated surfaces of ceiling by washing, rubbing down and scrapping of distemper surfaces and applying two coats of white wash complete all as specified and directed. |
| 136 | Item No. 134:- M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etccomplete all as specified and directed. |
| 137 | Item No.135-Preparing surface of sunken slab and applying 15mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, pidilite and Bostic as per manufacturer"s instructions both on floor as well as on wall and sunken floor shall be filled with graded clinder complete all as specified and directed. |
| 138 | Item No. 136 :- Taking down existing roof treatment of any description incl cement plaster etc and cleaning the top surface, washing down etc. Prepared to receive water proofing treatment incl filling of cracks, groves etc in neat cement slurry complete all as specified and directed. |
| 139 | Item No 137 :- M&L for rendering 10mm thick in cement mortar 1:4withliquid water proofing compound @200 ml per 50 kg cementfinished even and fair complete all as specified and directed. (Waterproofing compound shall be measured and paid separately) |
| 140 | Item No 138 :- M &L water proofing treatment on "Non spproachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed:-. |
| 141 | (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg /Sqm complete all as specified and directed by Engineer - in - charge. |
| 142 | (ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg / Sqm incl cleaning surfaces. |
| 143 | (iii) Laying unrolled over the bitumen coated surface, polymetric water proofing membrane Hyperpals standard wt not less than 3 kg / Sqm with 100 mm over laps shall be sealed by by flame as per manufacturers instruction. |
| 144 | (iv) Applying two coats of bituminous aluminium paint including preparation complete. |
| 145 | Item No. 139 :- M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as incopings, padding, roof kerbs, or mud stops rounded or chamfered on edges including necessary form workcomplete all as specified and directed. |
| 146 | Item No 140 & 141 :-BLANK |
| 147 | Item No. 142 :- M&L for Second class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 148 | Item No. 143 :- S&F in repairs vitreous china urinals, flat back of size 465mm x 355mm x 265mm, white with grating and union for discharge pipe complete all as specified and directed. |
| 149 | Item No. 144 :- S&F 32mm dia waste pipe of polythelene, flexible, for wash hand basin or urinals complete all as specified and directed. |
| 150 | Item No. 145 :- S&F waste coupling of PTMT (half or full threaded) for 32 mm dia complete all as specified and directed. |
| 151 | Item No. 146 :- S&F Gde 302, 18 Guage stainless steel Railing on stair case havinf 2" Top Horizontal main rail, 3 x 20 mm dia horizontal sub rail, 900mm Height 1.5" Vertical Support left every two steps complete all as specified and directed. |
| 152 | Item No. 147 :- precast RCC 1:2:4 type B1 using 20mm graded stone agg in shelves/cover slabs similar articles set in cement mortar 1:6 including all necessary form work (Note: Reinforcement shall be measured and paid separately). complete all as specified and directed. |
| 153 | Item No. 148 :- M&L RCC 1:2:4 Nominal Mix using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floor, roof, landing etc. complete all as specified and directed. |
| 154 | Item No. 149 :- M&L Formwork to soffits of suspended slabs such as roof slabs floor slabs, landing and similar work for fair finished surface complete all as specified and directed. |
| 155 | Item No. 150 :- M&L for form work to edges of concrete flats, treads, break in floors, window cills, horizental or sloping and similar exc 10cm but not exceeding 20 cm wide for fair finished surface complete all as specified and directed. |
| 156 | Item No. 151 :- Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or forshafts, wells cess its, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in any type soil complete all as specified and directed. |
| 157 | Item No. 152 :- M&L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 158 | Item No. 153 :- S&F Powder coated three track Aluminium sliding window with frame not less than 1mm thick excluding aluminium grill and including 5 mm thick tinted glass, beading & necessary rubber packing locking & opening arrangement, all fitting and fixturecomplete all as specified and directed. (Make: Jindal or equivalent) |
| 159 | Item No. 154 :- S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. |
| 160 | Item No. 155 :- S&f anodised glazed side hung door shutters with Powder coated aluminium frame of sction of 100x44x2mm and bottom rail of 44.5x99x1.8mm including 5.5 mm thick tinted sheet glass ordinary quality with all necessary suitable push & pull plate/handle, screw, jointing cleats, rubber packing aluminium snap beading and 1 No 200mm long Aluminium tower bolt, 100mm long 3 No aluminium butt hinges B-21 Type and one No mortice brass lock 100 size 4 leaver (vertical Type) with 01 No door closer Aluminium (Diie cast) body hydraullically regulated designation No 02 universal type, for each shutters complete all as specified and directed.(Door shall be size approx 1.2m x 2.1 in single leaf) (Make- Jindal or equivalent) |
| 161 | Item No 156 :-BLANK |
| 162 | Item No. 157 :- S&F in repair aluminium, anodised, barrel tower bolts of extruded section 200 mm size complete all as specified and directed. |
| 163 | Item No 158 :S&F in repair extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed. |
| 164 | Item No. 159 :- S&F in repairs mild steel, 300mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 165 | Item No. 160 :- S&F in repairs mild steel, 300mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 166 | Item No. 160 A :- M&L for Fe 410-W (Gde E-250 quality A) Framed works in door or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheetingor other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 167 | Item No. 160 B :- S&F Powder coated fixed Aluminium Partition with frame not less than 1.2 mm thick including 5 mm thick tinted glass with or without 12mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations beading & necessary rubber packing, all fitting and fixturecomplete all as specified and directed. (Make: Jindal or equivalent) |
| 168 | Item No. 160 C :- M&L for Providing precast cement concrete louvres and jallies, 50 mm thick (measured solid) of PCC 1:2:4 type Bo (using 12.5mm graded stone aggregates) set in CM 1:4, including all mouldings but excluding frame complete all as specified and directed. |
| 169 | INTERNAL ELECTRIFICATION |
| 170 | Item No. 161 :- Taking down copper / aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed. |
| 171 | Item No. 162 :- Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN / Main Switch including old unserviceable MCCBs/MCBs, Isolators, etc and making good to disturbed surface all as specified and directed. |
| 172 | Item No. 163 :- Taking down carefully copper/aluminium Sub main wiring of any size from surface /concealed /existing conduit of any height and removing materials from site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 173 | Item No. 164 :- Taking down carefully existing geyser of any capacity after disconnecting all necessary electric and water supply connections and deposit to MES store yard of AGE E/M complete all as specified and directed. |
| 174 | Item No. 165 :- Taking down existing ceiling/exhaust fan of any sweep after disconnecting all necessary electricalconnections from ceiling rose to fan and deposit to MES store yard of AGE E/Mcomplete all as specified and directed. |
| 175 | Item No. 166 :- Taking down existing single pointed air termination aluminium rod 300 mm long keeping and deposit to MES store yard of AGE E/Mfor safe custody for reuse complete all as specified and directed. |
| 176 | Item No. 167 :- Taking down roof conductor aluminium strip 25 mm x 3.15 mm complete with saddles and deposit to MES store yard of AGE E/M and keeping safe custody for reuse complete all as specified and directed. |
| 177 | Item No. 168 :- M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm(nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc incl anodised pressed steel sunken box for housing switch socket etc duly covered with white laminated 3mm thick hylam sheet cover including PVC insulated multi stranded copper conductor 1.5 Sq mm(nominal area)single core FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chases and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 178 | (a) One light point controlled by one, one way switch 5 Amps |
| 179 | (b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 180 | (c) One light point controlled by one, two way switch 5 Amps |
| 181 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 182 | (e) One 3 pin 5 Amps switch outlet point controlled by one switch on independent board. |
| 183 | Item No. 169 :- All as per item No 168 but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 184 | Item No. 170 :- All as per item No 168 but using 4 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 185 | Item No. 171 :- M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm(nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc with GI sunken boxes 1.2mm thick, 60mm deep for housing switch socket etc duly covered with modular white cover plate with inner frame suitable for modular switches including PVC insulated multi stranded copper conductor 1.5 Sq mm(nominal area)single core FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 186 | (a) One light point controlled by one, one way switch 5 Amps |
| 187 | (b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 188 | (c) One light point controlled by one, two way switch 5 Amps |
| 189 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 190 | (e) One 3 pin 5 Amps switch outlet point controlled by one switch on independent board. |
| 191 | (f) One bell point controlled by one, bell push 5 Amps |
| 192 | Item No. 172 :- All as per item No 171 but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 193 | Item No. 173 :- All as per item No 171 but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point) |
| 194 | Item No. 174 :- S & F Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site. |
| 195 | Item No. 175 :- S & F Switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed at site. |
| 196 | Item No. 176 :- S & F Switch Piano type 2 way switch 5 amp, 230 Voltscomplete all as specified and directed at site. |
| 197 | Item No. 177 :- S & F socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site. |
| 198 | Item No. 178 :- S & F socket outlet 2 in 1 , 5 pin, 5/15 amp, 230 Volts complete all as specified and directed at site. |
| 199 | Item No. 179 :- S&F Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified. |
| 200 | Item No. 180 :- S & F stepped type electronic fan regulator flushType complete all as specified and directed at site. |
| 201 | Item No. 181 :- S&F Modular switch Piano flush type, single pole, one way, 5/6 amp single module complete all as specified and directed at site. |
| 202 | Item No. 182 :- S&F Modular switch Piano flush type, single pole, one way, 15/16 amp single module complete all as specified and directed at site. |
| 203 | Item No. 183:- S&F Modular switch Piano flush type, single pole, two way, 5/6 amp single module complete all as specified and directed at site. |
| 204 | Item No. 184 :- S&F Modular socket outlet multipurpose having provision for 3 pin, 5/6 amp and 2 pin, 5/6 amp, 2 module piano flush type complete all as specified and directed at site. |
| 205 | Item No. 185 :- S&F Modular socket outlet multipurpose having provision for 3 pin, 15/16 amp and 3 pin, 5/6 amp, 2 module piano flush type complete all as specified and directed at site. |
| 206 | Item No. 186 :- S&F modular step type electronic fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed at site. |
| 207 | Item No. 187 :- S&F Bell Push modular 6 amps single module complete all as specified and directed. |
| 208 | Item No. 188 :- S&F lamp holder, PVC/ Polycarbonate type with back plate suitable for batten / slanting fittings complete all as specified and directed. |
| 209 | Item No. 189 :- S&F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ AC supply complete all as specified and directed. |
| 210 | Item No. 190 :- M&L for Sub main wiring with approved colour as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and direced. (Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit) |
| 211 | Item No. 191 :- S&F Sheet metal enclosure MCB DB TPN 6 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. |
| 212 | Item No. 192 :- S&F Sheet metal enclosure MCB DB SPN 8 way Vertical type with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. |
| 213 | Item No. 193 :- S&F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, "C" curve complete all as specified and as directed. |
| 214 | Item No. 194 :-S&F MCB Single pole and neutral rated capacity 5 to 32 Amps, 240 Volts breakingcapacity 10 KA, "C" curve complete all as specified and as directed. |
| 215 | Item No. 195 :-S&F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breakingcapacity 10 KA, "C" curve complete all as specified and as directed. |
| 216 | Item No. 196 :- S&F Metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and directed. |
| 217 | Item No. 197:- S&F water heater storage type (Geyser) vertical/Horizental type as per site requirement with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star rated, ISI marked including 04 Nos of hold fechner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold complete all as specified and directed. |
| 218 | Item No. 198 :- S&F ceiling fan, 230 volts, 1200 mm sweep with main air delivery 210 CFM, service value of fan shall be greater than 6.1 as per BIS, with blades, down rod & other necessary accessories with brushless direct current motor(BLDC)incl provn of flexible cable from ceiling rose to fan terminal incl writting MES No. with synthetic enamel paint complete all as specified and directed. |
| 219 | Item No. 199 :- Fixing only ceiling fan/exhaust fan incl provn of 3 core PVC insulated, PVC sheathed cable 3 core flexible cable of stranded copper conductor of size 23/0.193 from ceiling rose to fan terminal incl overehauling of fan and painting with two coats & writting MES No. with synthetic enamel paint complete all as specified and directed. |
| 220 | Item No. 200 :- S&F Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL diect fir lamp, in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed. |
| 221 | Item No. 201 :- S&F Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10 Watts complete all as specified and directed. Make:- Havells Cat Part No LHDLO6160099 or its equivalent in specified make. |
| 222 | Item No. 202 :- S&F LED tube light fitting 2 feet x 100 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and as directed. |
| 223 | Item No. 203 :- S & F Energy saving new generation 10 Watts LED bulk head fitting IP-65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 form ceiling rose to fitting complete all as specified and directed. Make:- Bajaj Cat Part No BIBWP 10W LED or its equivalent in specified make. |
| 224 | Item No. 204 :- S & F wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen etc with warranty option of 5 years from date of installation complete with all accessories internally pre-wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make:- Bajaj Cat Part No BCLAB 20 W WH LED P, Wipro Cat Part No. LL20-281-XXX065-ALI or its equivalent in specified make. |
| 225 | Item No. 205 :- S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangementswith warranty option of 5 years from date of installation/completion and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge.Make :- Bajaj Cat Part No ENXT P 24L WH CR PC SD or its equivalent in specified make. |
| 226 | Item No. 206 :- S & F for Energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 Cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable o size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick for fan base complete all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed included in quoted rate). |
| 227 | Item No. 207 :- S & F for Energy efficient exhaust fan of 400 mm/450mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 Cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable o size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick for fan base complete all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed included in quoted rate). |
| 228 | Item No. 208 :- S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/Ivory colour and its accessories heacy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting. chasses and making good distrubed surface to match with existing finish with plaster complete all as specified and directed. |
| 229 | Item No. 209 :- Fixing only Single pointed air termination aluminium rod, 12mm dia, 300 mm long obtained from taking down complete all as specified and directed. |
| 230 | Item No. 210 :- Fixing only aluminium strip 25 mm x 3.15 mm complete with saddles and fixing screws as roof conductor obtained from taking down complete all as specified and directed. |
| 231 | Item No. 211 :- Supply and fix single pointed aire termination aluminium rod, 12 mm dia, 300 mm long with necessary fixing arrangements as per site requirements complete all as specified and directed. |
| 232 | Item No. 212 :- Supply and fixing aluminium strip 25 mm x 3.15 mm complete with saddles and fixing screws as roof conductorcomplete all as specified and directed. |
| 233 | Item No. 213 :- Supply and fix tubes light grade galvanised of size 15 mm bore with all fittings and fixed complete for supporting the air temination rod and protection of GI strip complete all as specified and directed. |
| 234 | Item No. 214 :- M&L for Test point terminal block made of gun or phosphorus bronze size 75 x 75 x 25 mm, drilled and secrewed including 3 nos 8 mm dia 25 mm long hex. Head screw including removal old extg unsv one complete all as specified and directed. |
| 235 | Item No. 215 :- M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe loght grade 20 mm dia, PCC chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate No 3 of SSR Part I including excavation and earthwork in any type of soil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. complete all as specified and directed. |
| 236 | SCHEDULE "A"(Schedule of credit) Schedule of Credit Rs 235368.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
