Bids Are Invited For Item 1 Technical Specification Of Almirah Steel Generally Conforming To Bis Specification Is: 3312:2021 ( With Latest Amendment ) , Type Of Almirah Steel Almirah Steel Shelving Cabinets, Number Of Doors 2, Number Of Shelves 4, Steel Sheet Material Crca Sheets Conforming To Grade Cri Of Is 513 ( Part-1 ) :2016 ( With Latest Amendment ) , Sheet Rounds And Flats Conforming To Grade E 250 Of Is 2062, Almirah Height ( Excluding The Height Of Pedestal ) ± 5 Mm 1800 Mm, Almirah Width ± 5 Mm 900 Mm, Almirah Depth ± 5 Mm 480 Mm, Side Sheet Thickness 0.8 Mm, Back Sheet Thickness 0.8 Mm, Top Sheet Thickness 0.8 Mm, Bottom Sheet Thickness 0.8 Mm, Shelves Sheet Thickness 0.8 Mm, Hinges Sheet Thickness 1.6 Mm, Width Of Stiffener 100 Mm, Stiffener Sheet Thickness 0.6 Mm, Handle Size 12 Cm, Steel Almirah Lock / Locker Lock Six Lever Lock, Material Of Lock Steel, Powder Coating With 50-Micron Thickness Minimum Item 2 Chair Mechanism Tilt Working With Torsion Bar Mechanism, Type Of Locking Tilt Limiter, Number Of Arm Movement 2 ( Up And Down ) , Pedestal Base Steel, Armrest Material Polypropylene, Seat Material Pressed And Moulded With Pu Foam, Backrest Is Made Of Onepiece Hot-Pressed Plywood With Pu Foam, Density Of Pu Foam Used In Seat Kg Per Cu Meter ( ± 3 ) 60, Backrest Upholstered With Mesh Fabric, Seat Upholstered With Mesh Fabrics, Gsm / Thickness Of Fabric ±5% ( Gram / Square Meter ) 220 Gram, Overall Width ( ±10 Mm ) 630 Mm, Backrest Height ±15 Mm 950 Mm, Backrest Width ±10 Mm 440 Mm, Seat Height ±10 Mm 525 Mm, Seat Width ±10 Mm 480 Mm, Seat Depth ±10 Mm 430 Mm, Thickness Of Ms Plate Joining The Under Structure With Seat 0.3 Mm, Thickness Of Plywood Used In Seat ±1 ( Mm ) 15 Mm, Pedestal Size ( Diameter In Mm ) ±10 Mm 600 Mm, Thickness Of Polyurethane Foam Used In Seat In Mm ( ±2 Mm ) 30 Mm Item 3 Chair Type One Arm With Fixed Writing Pad On One Side Other Side Open, Type Of Seat And Backrest Made Of Polypropylene., Frame Material Mild Steel Square Section Of Size 25 X 25 Mm And Wall Thickness Minimum 1.6 Mm, Writing Pad Material 18 Mm Thick Prelaminated Particle Board Item 4 Structure Of Metal Bed Frame Including Legs And Head Structure Ms Hollow Rectangular / Square Section, Size Of Rectangular Hollow Section ±1 ( Mm ) 50 Mm X 25 Mm, Size Of Square Hollow Section ±1 ( Mm ) 25 Mm X 25 Mm, Thickness Of Hollow Section In Structure ( Mm ) 0.8 Mm, Support Panel For Placement Of Mattresses Ms Hollow Box Rectangular Section, Thickness Of Support Panel ( In Mm ) 1.1 Mm, Overall Length Of Bed In Mm ( ±10 Mm ) 1800, Height Of Bed In Mm ( ±10 Mm ) 450 Millimetre, Paint / Finish Of Ms Parts Powder Coating, Min Powder / Paint Coating Thickness ( Micron ) 60 Micron, Number Of Support Members 4 Item 5 Storage Provided Both Side - Pedestal And ( E.R.U ) , Keyboard Tray Provided, Foot Rest Provided, Table Top Material Prelaminated Mdf Board, Gable End And Modesty Panel Material Flat Single Layer Prelaminated Mdf Board Conforming To Having Designation Plmdf23 Of Is 14587 / Latest, Leg Material Other Wood, Thickness Of Table Top ±2 Mm 19 Millimetre, Length Of Table Top ±10 Mm 1500 Millimetres, Depth Of Table ±10 Mm 900 Millimetres, Height Of Table ±10 Mm 760 Millimetre, Number Of Storage Unit Provided 4 Drawer And One Cupboard ( 3 Drawer One Side And 1 Drawer & 1 Cupboard With Handle At Another Side ) , Material Thickness Of Footrest ±2 Mm 19 Mm Item 6 Material Of Desk Top + / - 2 Mm ( For Shelf / Storage + / - 4 Mm ) 18 Mm Thick Prelaminated Plywood With 0.8 Mm ± 0.2 Mm Thick Laminate, Material Of Support Structure Or Side Panel Mild Steel Square Section Of Outside Side Minimum 25 Mm And Wall Thickness Minimum 1.2 Mm, Height Of Desk Top In Mm ( ±5 Mm ) 750, Width Of Desk Top In Mm ( ± 5 Mm ) 600, Type Of Desking Only Table / Desk With Shelf / Storage Under Desk, Desking Configuration Single Seater, Length Of Desking, Seating And Backrest ( If Provided ) In Mm ( ±10 Mm ) 600, Material Of Seat And Backrest ( If Provided ) ( + / - 2 Mm ( For Back Rest + / - 4 Mm ) Only Desk No Seating, Material Of Support Structure Only Desk No Seating , Material Of Seat Cushion Only Desk No Seating, Width Of Seating In Mm ( ±10 Mm ) Only Desk No Seating, Height Of Seat In Mm ( ±10 Mm ) Only Desk No Seating, Width Of Backrest If Provided In Mm ( ± 5 Mm ) No Backrest, Back Support For Seating Of Same Material As Seating Back Support Not Provide Item 7 Number Of Free Services During Warranty 2, Warranty Of Machine 1 Year, Life Of Ro Filters ( Litres ) 14000-16000, Warranty Of Compressor 2 Year, Body Material Ss 304, Storage Capacity 100 Litre, Condensor Material Copper, Water Filter Type Ro & Uv Both, Cooling Capacity, Ltr / Hr 150, Purification Capacity, Ltr / Hr 50, Power Requirement 220-240 V Ac, Item 8 Capacity Litres ( Litres ) 50 Litre, Bee Star Rating ( Central Ministries / Departments While Procuring Shall Ensure That The Items Carry 5 Star Or Higher Star Rating Of Bee ) 3, Material Of Inner Container Steel, Warranty ( Year ) 3 Item 9 Table Top Seat Material Steel, Table Top Seat Thickness 1.0 Mm, Leg Material For Table Ms Erw Tubes Conforming To Is : 7138 – Latest, Wall Thickness Of Leg Material ( For Table ) 1.6 Mm, Support Material For Table Ms Erw Tubes Conforming To Is : 7138 – Latest, Product Configuration Provision For 4 – Persons, Mode Of Supply Assembled Ready To Use, Table Foot Rest All Four Sides Along The Width And Depth Both., Chair / Bench Back Rest Without, Support For Table Top Width Wise Support, Number Of Supports For Table Top 3 No., Width Of Table ± 10 Mm 1800, Size Of Support Pipes / Square Sections ( For Table ) 25 Mm X 30 Mm Item 10 Type Stored Pressure, Extinguishing Media Powder Based ( As Per Is 4308 ) , Expellant Medium N2 Based ( Stored Pressure ) , Type Of Extinguisher Low Pressure Extinguisher ( Service Pressure ≤19 Bar ) , Material Specification For The Body Of Low Pressure Extinguisher Steel Cylinders ( As Per Clause 9.2.6 Of Is 15683 ) , Powder Based Fire Extinguisher Capacity In Kg 4, Features Of Fire Extinguisher Carrying Handle ( Mandatory If Extinguisher Having Mass ≥1.5Kg Or Cylinder Diameter , Safety Devices ( Mandatory For High Pressure Extinguisher ) , Rechargeable , Hose Assemblies ( Mandatory If Mass Or Volume Of Extinguishing Medium > 3 Kg Or Litres ) , Class Of Fire For Which Fire Extinguisher Is Suitable Class -A, Operating Temperature ( °C ) - 30°C To +60°C, Minimum Effective Discharge Time For Fire Extinguisher 8 Second, Fire Rating Of Different Class Of Fires 2A Item 11 Technical Specification Of Almirah Steel Generally Conforming To Bis Specification Is: 3312:2021 ( With Latest Amendment ) , Type Of Almirah Steel Almirah Steel With Glass Door, Number Of Door 2, Number Of Drawers Required No Drawer, Number Of Shelves 4, Steel Sheet Material Crca Sheets Conforming To Grade Cri Of Is 513 ( Part-1 ) :2016 ( With Latest Amendment ) , Sheet Rounds And Flats Conforming To Grade E250 Of Is 2062, Almirah Height ( Excluding The Height Of Pedestal ) ± 5 Mm 1800 Mm , Almirah Width ± 5 Mm 900 Mm, Almirah Depth ± 5 Mm 450 Mm , Side Sheet Thickness 0.8 Mm , Back Sheet Thickness 0.8 Mm, Top Sheet Thickness 0.8 Mm, Bottom Sheet Thickness 0.8 Mm, Shelves Sheet Thickness 0.8 Mm, Shelves Supporting Bracket Thickness 1.6 Mm, Hinges Sheet Thickness 1.25 Mm ( Double Folded ) , Mirror Frame Sheet Thickness 0.8 Mm, Width Of Stiffener 140 Mm, Stiffener Sheet Thickness 0.7 Mm, Number Of Glass Sheet Fixed 2, Handle Size 8 Cm, Steel Almirah Lock / Locker Lock Six Lever Lock, Material Of Lock Steel, Finish Coat With Enamels Stoving Enamel, Powder Coating With 50 Micron Thickness Minimum Item 12 Bucket Body Material Coloured Hdpe, Food Grade Quality Material Yes, Capacity ( Ltrs ) 15 Liter, Uv Resistant Yes, Lid Without Item 13 Technical Specification Of Almirah Steel Generally Conforming To Bis Specification Is: 3312:2021 ( With Latest Amendment ) , Type Of Almirah Steel Almirah Steel Shelving Cabinets, Number Of Door 2, Number Of Shelves 3, Steel Sheet Material Mild Steel Sheets Conforming To Grade Hr1 Of Is 1079:2009 ( With Latest Amendment ) , Sheet Rounds And Flats Conforming To Grade E250 Of Is 2062, Almirah Height ( Excluding The Height Of Pedestal ) ± 5 Mm 1200 Mm, Almirah Width ± 5 Mm 910 Mm, Almirah Depth ± 5 Mm 450 Mm, Side Sheet Thickness 0.8 Mm , Back Sheet Thickness 0.8 Mm, Top Sheet Thickness 0.8 Mm , Bottom Sheet Thickness 0.8 Mm, Shelves Sheet Thickness 0.8 Mm, Hinges Sheet Thickness 1.6 Mm, Handle Size 12 Cm, Steel Almirah Lock / Locker Lock Six Lever Lock, Material Of Lock Steel Item 14 Top / Chair Seat / Bench Seat Material Steel, Top / Chair Seat / Bench Seat Thickness 0.6 Mm, Leg Material For And Chair / Bench Steel, Wall Thickness Of Leg Material ( For And Chair / Bench ) 0.6 Mm, Support Material For And Chair / Bench Steel, Backrest Material For Chair / Bench No Backrest, - Chair / Bench Attaching Material Steel, Product Configuration Provision For 4 – Persons, Width Of ± 10 Mm 2200 For 4-Seater, Chair / Bench Leg Size ± 2 Mm 15 Mm X 15 Mm, Size Of Support Pipes / Square Sections ( For ) 20 Mm X 20 Mm, Size Of Support Pipes / Square Sections ( For Chair / Bench ) 15 Mm X 15 Mm
