Drinking Water And Sanitation Department has published Tender For Furniture And Furnishing Work For Uttarakhand Niwas, 03, Gopinath Bardolai Marg, Chankyapuri, New Delhi. Submission Date for this Tender is 20-01-2023. Furnishing Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Jan-2023 | Corrigendum-I | Other | 20-01-2023 |
| Sl. No. | Item Description |
| 1 | Furniture works Reception (Ground Floor) RT1: Reception Table: 3300 (L)x900(W)x1200(h)+ 1050 (L) x600 (W)-2NOS. Supplying, and placing in position of U-Shapped Reception Table as per Image/drawing . The Table Structure made up of25mm thickBWR plywood (IS:303 grade). Modesty (Front & side) panel shall be of 100mm Wide, 6/12mm thick Teak wood strips finished with PU polished placed in slanted panels as per image. Table top height Shall be 750mm from thefloor level & one additional topheight 1100 mm from the floor levelas per shown in image. The working counters shall be provided with 18mm Polished Italian Stone as per approved with overall visible thickness of 50mm. 2nos. Mobile pedestal of size 400mm(L) x 450mm(D)x600mm(HT) (2 drawer + 1filling).PedestalStructure made out of 18mm thick BWR plywood . All Exposed visible Surfaces to be finished with 4mm Teak Veneer and PU Polish and all Inside surface to be finished with 0.8mm Laminate, all edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The wire carrier should Made from 0.8mm thick CRCA & powder coated 40-50 microns . Also provision of 6 modulefliptop box (3 nos) for the scope of USB point, Electrical Connecctions, internet connection, LAN point to be provided & metal raceway below the table topfor wire flow. The product should be complete as per the reference image and the specification mentioned above under the guidence ofProject Architect & Engineer Incharge. |
| 2 | BC1: Back credenza:3300 (L)x450(W)x750(h) Supplying, and placing in position ofBack credenzaof 750mm height as per Image/drawing . Storage unithaving Openable shutters with shelf and 2 nos drawer provision as per shown in image. The storage unit Structure shall be made from 18 mm thickBWR plywood (IS:303 grade)with back to be made of 8 mm thick BWRplywood. All Exposed visible Surfaces to be finished with 4mm Teak Veneer with PU Polish and all Inside surface to be finished with 0.8mm Laminate, all edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Visible Thickness of Top and side panel to be 50mm as per shown in image.The storage unithavingPVD finished SS legs in approved shade as shown in image. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 3 | RC1:Mid Back Revolving Chair Supplying, and placing in position of360 degree revloving medium back chairas per Image.The medium mesh back chairwith adjustable armrests.Material & Subtype: Mesh, Colour & Colour Family: Black, Dimension(W)600mm X (D)500mm X (H)1090mm, Back Type:Medium Back, Base:Aluminium Base, Base Type:Revolving, Maximum Seating Height:21.25" ,Minimum Seat Height:17.32", Function: Revolving::Pneumatic Height Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable, Armrest, 3 D Lumbar Support,Locking Mechanism: self tention adjustment/any position multi locking, chair Handle: adjustable handle with pp pad .The Seat ismade up ofmoulded foam ofdensity 35-38 kg/m3 with inner & outer cover and upholstered with fire retardant fabric.The chair is fixed to a sleek chrome vaulted base with its individual prongs powered by nylon castors of size 55mm. Warranty period 5 yrs. The manufacture should have mandatorylist of in-house machinery and testinglabfacility for the chairs as per BIFMA standard(eg: (i) load impact test machine- for testing of seat plywood strength, gas lift durablity (ii) Back bar test machine- for testing of back plywood and back bar strength.(iii) Castor and base testing machine- for testing the castor and base durability. (iv) complete chair testing machine- for testing of complete chair and handles strength. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 4 | RWC1:Lounge Chair:750(w)x750(D)x800(h) Supplying and placing in position of lounge chair upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 5 | RWS1:Single Seater Sofa:900 (w)x800(D)x925(h) Supplying and placing in position of Single Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 6 | RWS2:2- Seater Sofa: 1800 (w)x800(D)x925(h) Supplying and placing in position of Double Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 7 | RWCT1:Center Table: 1200 (w)x750(D)x450(h) Supplying and placing in position of Eleptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood / nechural woodend peper vennerlipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 8 | RWCT2:Side Table: 600 (dia)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with round shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood/ nechural woodend peper venner lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 9 | Restaurant (Ground Floor) RBC1:Buffet Counter: 6100 (L)x750(D)x800(H) Supplying, and placing in position ofbuffet counter as per Image. The counter structure (top,sides, shutter, center partition, bottom) are made out of 18mm thk BWR plywood (IS:303 grade) finished with 4mm Veneer on Outside visible faces and 0.8mm laminate on Inside usable face.. The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The one side of a counterhaving a combination of openable shutters and open storage with shelf and the another side of the counter having a provision of open storage with shelf including electrical light fixture in it as per direction of Architect. The counter top of the tableshall be provided with18m m thk polish Italian Stone as per selection with visible thickness of 50mm. All Visible Veneer/Wood surfacesto finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 10 | MT1, MST2: Manager"s Table: 2150(L)x600(D)x750/1050(H), Side Table 1200(L)x450(D)x750/1050(H) Supplying, and placing in position of L-Shapped Manager"sTable as per Image/drawing .The table Structure made up of18mm thick BWR plywood (IS:303 grade) finished with 4mm Veneer on Outside visible faces and 0.8mm laminate on Inside usable face. The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Visible Modesty & side panel shall be 18mm thk BWR plywood with 100mm Wide and 4mm thick veneer strips with 4mm gap . Table top height will be 750mm from thefloor level & one additional top at the height of 300 mm above the table top rest on BWR plywood overall ht of the table1050mm.1nos. Mobile pedestal of size 400mm(L) x 450mm(D)x600mm(HT) (2 drawer + 1filling).PedestalStructure made out of 18mm thick BWR plywood . All Exposed visible Surfaces to be finished with 1mm Laminate , all edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 11 | RT1: DiningTable: 1500 (L)x900 (W)x750(H) Supplying, and placing in position of dining tableas per Image . The table topare made out of 25mm thk BWR plywood (IS:303 grade) with 18mm thick Polished Italian Stone as approved. Visible thickness of Italian stone to 50mm complete with half-set jount and edge polished . The Table top supported with PVD Coated SS profile of suitable size bended to achive desired shape with PVD Coated SS rectunglar Base plate of size 300mm x 600mm as per shown in image. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 12 | RT2:DiningTable: 1200 (L)x1200 (W)x750(H) Supplying, and placing in position of dining tableas per Image . |
| 13 | RT3: DiningTable: 1500 (L)x900 (W)x750(H) Supplying, and placing in position of dining tableas per Image . |
| 14 | RS1:2- Seater Sofa: 1800 (w)x800(D)x925(h) Supplying and placing in position of Double Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint and Exposed Legs made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 15 | RC1:Restaurant Chair with arms: 550(W)x550(D)x900(H) Supplying and placing in position of Restaurant chair upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint and Exposed round Legs (50-40mm dia) made in teak wood. The seat is made of PU ?foam with Density ?9 ?kg for 3" x 3" size and minimum 4"" thick of Cool foam or equivalent after this fabric of 32 density 1"" to 2"" as required on seat, arms & back. On top of this poly fil for shape and extra if required on seat & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 16 | RTT1:Console Table: 1880(L)x450(W)x800(H) Supplying and placing in position of console Tablefor multipurposes uses as per image. The structure of console unit shall be made of solid wood (First Class Teak) .The solid wood shall be KILN dried season . The top made up of 18 mm plywood with 4 mm teak veneer on top including top edge covered with 25x25 mm teak designer biddingand the curvature legs are made out of 100mm x 40mm thk at upper side & 30mm x 30mm thk at bottoam side are made out ofsolid wood (First Class Teak). The console unit having a provision of one single drawer with knob handle. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 17 | Waiting area (Press"s meeting room) (Ground Floor) WAS1: 2-Seater Sofa: 1600 (w)x600(D)x900(h) Supplying and placing in position of 2-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 18 | WAST1: Center Table: 1200 (w)x750(D)x450(h) Supplying and placing in position of Eleptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood / nechural woodend peper vennerlipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 19 | WACT1: Side Table: 600 (dia)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with round shape shelf in 18mm BWR ply finished with 4mmteak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood/ nechural woodend peper venner lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 20 | Guest"s sitting area (First Floor) GSS1: Single Seater Sofa: 750 (w)x750(D)x800(h) Supplying and placing in position of lounge chair upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin corePU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 21 | GSS2: 2-Seater Sofa: 1600 (w)x750(D)x800(h) Supplying and placing in position of lounge chair upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin corePU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 22 | GSST1: Center Table: 1050 (w)x450D)x450(h) Supplying and placing in position of Eleptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood / nechural woodend peper vennerlipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 23 | GSCT1:Side Table: 450 (dia)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm withround shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood/ nechural woodend peper venner lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 24 | CS1: Single Seater Sofa: 750 (w)x750(D)x800(h) Supplying and placing in position of lounge chair upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 25 | CSST1: Center Table: 900 (w)x450D)x450(h) Supplying and placing in position of Eleptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood / nechural woodend peper vennerlipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 26 | CCT1: Side Table: 450 (dia)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with round shape shelf in 18mm BWR ply finished with 4mm burl teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood/ nechural woodend peper venner lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 27 | V.I.P Suite (23nos.) Bedroom VSDB1: Double Bed: 2050(D)x1850(W)x350(H) Supplying and placing in position ofDouble bed . Bed box Structure made out with 18 mm BWR ply with out side 4 mm thick teak venner including all edge covered with teak wood lipping and corner joint with 50x50x mm teak wood corner round shape. Including 2 class hard wood support 4 nos. memder size70x30 mm. skarting 50 mm hight made with 18 mm PLY with 4mm thick venner and 12 mm ply on bed top. Head board made out of size 1050x 1850 mm with 18 mm BWR ply including 36 mm thick upholstered panelhaving 30 mm thick, 32 density foam covered with fabric of approved shade and design including culting design and 50mm thick border finished with 12mm teak wood on all three sides of backboard etc all complete. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 28 | VSBST1:Bed Side Table: 400(D)x500(W)x350(H) Supplying and placing in position of of bed side table. bed side tablestructure made out with 18 mm BWR ply with 4 mm thick teak venner on visible face and 0.8mm thick laminate on all internal usable side.All visible edge to be covered with 2nd class teak wood lipping, back side covered with 6 mm ply.one fix (false) drawer in bottom and one openable drawer in top made with 12 mm BWR ply with teliscopic channel. Drawer front made 4mm thick HDMR board etc all complete. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 29 | VSS1: 2-Seater Sofa: 1600 (w)x800(D)x800(h) Supplying and placing in position of 2-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 30 | VSCT1 Center Table: 1050 (w)x600(D)x450(h) Supplying and placing in position of Elliptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm burl veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick bural venner. All visible edge to be covered with 2nd Class teak wood lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 31 | VSS2/VSS3 Single Seater Sofa: 800 (w)x750(D)x900(h) Supplying and placing in position of Single Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed legs made of size 50mm x 50mmthk at upper sideand 40mm x 40mm thk at bottom sidein teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 32 | VSSST1 Side Table: 450 (dia)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm burl veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick bural venner. All visible edge to be covered with 2nd Class teak wood lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 33 | VSSC1Study Chair: 550(D)x550(W)x950(H) Supplying and placing in position of Study chair. chairSeat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame along with soft foamfor a comfortable seat. The seat cushion is made of75mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric of approved shade. Chair back frame and Handrest: frame and hand rest shall be mde out of 40x40mm 2nd Class Teak wood frame along with soft foamfor a comfortable back. The back cushion is made of25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric (both front and back) of approved shade . The chair havinglegsof size 40mm x 40mmthk at upper side and 25mm x 20mmthk at bottom side are made out of 2nd Class teak wood. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 34 | VSST1 Study table: 1200/1600(W)x600(D)x750(H) Supplying and placing in positionof Study table. Table topand one side support made out of 18mm thk BWR plywood with 4mm thk teak veneer. Top of the table to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of table top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 35 | VSTT1/VSTT2Counter Below TV Counter: :2300-3200(L)x200(D) TV Frame: :1050(W)x750(H)x75(W) Supplying and placing in position of Counter Below LED UNIT. Thestructure (top,sides , bottom ) made out of 18mm thk BWR plywood (IS:303 grade) with 4mm thk teak veneer, Top of the Counter to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of Counter top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image and LED frame for size 1050x750x75 mm made with 18mm ply with 4 mm thick venner having finished depth of 50mm. Size of frame to be suitable to accomodate selected 42" LED TV. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 36 | VSMFC1,Fridge Rack: 1200/1600(W)x600(D)x750(H) Supplying and placing in positionof frige rack. Thestructure (top,sides , bottom ) made out of 18mm thk BWR plywood (IS:303 grade) with 4mm thk teak veneer.Top of the table to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of table top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image.All Internal usable sides to be finished with 0.8 mm laminate. Front Side of rack to have one portion open to accomodate 65ltr mini fridge and remaining part to have shutter with storage inside with 1 no shelve. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 37 | VSMFC2 Fridge Rack: 1000(W)x600(D)x750(H) Providing and Placing V.I.P suite mini freeze counter as per specifications |
| 38 | VSDL1Luggage Rack: 1700(W)x600(D), Wall panelling with mirrior: 1700x1500mm. Supplying and placing in position of Luggage Rack andWall panelling with mirrior. Thestructure made out of 18mm thk BWR plywood with 4mm thk teak veneer. 4nos. SS Solid Stripof 6x6 mm inlayed in top of luggage rack. Visible thickness of Luggage rack of 100mm and finished with 4mm teak veneer. Wall panelling in 18mm BWP finished with 4mm veneer (band of 100mm on sides and top and 300mm in bottom) with 5mm single peice mirrior pasted on 12mm BWR ply. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 39 | VSDL2Luggage Rack: 1000(W)x600(D), Wall panelling with mirrior: 1000x1500mm. Providing and Placing V.I.P suite dress luggage as per specifications |
| 40 | VSDL3 Luggage Rack: 900(W)x600(D), Wall panelling with mirrior: 900x1500mm. Providing and Placing V.I.P suite dress luggage as per specifications |
| 41 | VSA1 Wardrobe: 1000(W)x600(D)x2100(H), Open Rack : 500(W)x600(D)x2100(H). Fabrication, Supply and fixing of Wardrobe & Open Rack. Complete Structure made up of 18mm BWP ply with 12mm BWP Ply on back side, finished with 4mm Veneer on visible faces and 0.8mm laminate on Inside usable face. Almirah to have provision of Digital locker and space for coat hanger with three shelves including coat hooks, hangers and all assecories etc all complete. Open Rack Structure made up of 18mm BWP ply finished with 4mm veneer with visible frame thickness of 45mm. Open rack to made with 4 Equal Horizontal compartments in 8mm Toughened glass. 50mm high and 18mm recessed skirting to be provided and to be finished with4mm veneer. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 42 | VSA2 Wardrobe: 1025(W)x600(D)x2100(H), Providing and Placing V.I.P suite almirah as per specifications |
| 43 | VSA3 Wardrobe: 900(W)x600(D)x2100(H), Providing and Placing V.I.P suite almirah as per specifications |
| 44 | V.I.P Delux Suite (25nos.) Bedroom VDSDB1 Double Bed: 2050(D)x1850(W)x300(H) Supplying and placing in position ofDouble bed . Bed box Structure made out with 18 mm BWR ply with out side 4 mm thick teak venner including all edge covered with teak wood lipping and corner joint with 50x50x mm teak wood corner round shape. Including 2 class hard wood support 4 nos. memder size70x30 mm. skarting 50 mm hight made with 18 mm PLY with 4mm thick venner and 12 mm ply on bed top. Head board made out of size 1050x 1850 mm with 18 mm BWR ply including 36 mm thick upholstered panelhaving 30 mm thick, 32 density foam covered with fabric of approved shade and design including culting design and 50mm thick, 100mm wideborder finished with 4mm teak veneeron all three sides of backboard etc all complete. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 45 | VDSBST1Bed Side Table: 400(D)x500(W)x350(H) Supplying and placing in position of of bed side table. bed side tablestructure made out with 18 mm BWR ply with 4 mm thick teak venner on visible face and 0.8mm thick laminate on all internal usable side.All visible edge to be covered with 2nd class teak wood lipping, back side covered with 6 mm ply.one fix (false) drawer in bottom and one openable drawer in top made with 12 mm BWR ply with teliscopic channel. Drawer front made 4mm thick HDMR board etc all complete. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 46 | VDSS1 Single Seater Sofa: 800 (w)x800(D)x900(h) Supplying and placing in position of Single Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 47 | VDSS2 3- Seater Sofa: 2100 (W)x800(D)x900(h) Supplying and placing in position of 3-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 48 | VDSST1Corner Table: 450x450 (LxW)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm burl veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick bural venner. All visible edge to be covered with 2nd Class teak wood lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 49 | VDSST2 Corner Table: 350 (dia)x450(h) Supplying and placing in position of Corner Table |
| 50 | VDSCT1 Center Table: 1050 (w)x600(D)x450(h) Supplying and placing in position of Eleptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood / nechural woodend peper vennerlipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 51 | VDSSC1 Study Chair: 550(D)x550(W)x950(H) Supplying and placing in position of Study chair. chairSeat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame along with soft foamfor a comfortable seat. The seat cushion is made of75mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric of approved shade. Chair back frame and Handrest: frame and hand rest shall be mde out of 40x40mm 2nd Class Teak wood frame along with soft foamfor a comfortable back. The back cushion is made of25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric (both front and back) of approved shade . The chair havinglegsof size 40mm x 40mmthk at upper side and 25mm x 20mmthk at bottom side are made out of 2nd Class teak wood. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 52 | VDSST1Study table: 1200/1600(W)x600(D)x750(H) Supplying and placing in positionof Study table. Table topand one side support made out of 18mm thk BWR plywood with 4mm thk teak veneer. Top of the table to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of table top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 53 | VDSTT1 Counter Below TV Counter: :2300-3200(L)x200(D) TV Frame: :1050(W)x750(H)x75(W) Supplying and placing in position of Counter Below LED UNIT. Thestructure (top,sides , bottom ) made out of 18mm thk BWR plywood (IS:303 grade) with 4mm thk teak veneer, Top of the Counter to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of Counter top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image and LED frame for size 1050x750x75 mm made with 18mm ply with 4 mm thick venner having finished depth of 50mm. Size of frame to be suitable to accomodate selected 42" LED TV. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 54 | VDSTT2 2400x200 Providing and Placing V.I.P Delux suite TV table Type-2 as per specifications |
| 55 | VDSTT3 1525x200 Providing and Placing V.I.P Delux suite TV table Type-3 as per specifications |
| 56 | VDSTT4 3175x200 Providing and Placing V.I.P Delux suite TV table Type-4 as per specifications |
| 57 | VDSTT5 1400x200 Providing and Placing V.I.P Delux suite TV table Type-5 as per specifications |
| 58 | VDSMFC1 Fridge Rack: 1200/1600(W)x600(D)x750(H) Supplying and placing in positionof frige rack. Thestructure (top,sides , bottom ) made out of 18mm thk BWR plywood (IS:303 grade) with 4mm thk teak veneer.Top of the table to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of table top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image.All Internal usable sides to be finished with 0.8 mm laminate. Front Side of rack to have one portion open to accomodate 65ltr mini fridge and remaining part to have shutter with storage inside with 1 no shelve. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 59 | VDSDL1 Luggage Rack:1450(W)x600(D), Wall panelling with mirrior: 1450x1500mm. Supplying and placing in position of Luggage Rack andWall panelling with mirrior. Thestructure made out of 18mm thk BWR plywood with 4mm thk teak veneer. 4nos. SS Solid Stripof 6x6 mm inlayed in top of luggage rack. Visible thickness of Luggage rack of 100mm and finished with 4mm teak veneer. Wall panelling in 18mm BWP finished with 4mm veneer (band of 100mm on sides and top and 300mm in bottom) with 5mm single peice mirrior pasted on 12mm BWR ply. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 60 | VDSDL2 Luggage Rack:1420(W)x600(D), Wall panelling with mirrior: 1420x1500mm. Providing and Placing V.I.P Delux suite dress luggage as per specifications |
| 61 | VDSA1 Wardrobe: 1000(W)x600(D)x2100(H), Open Rack : 500(W)x600(D)x2100(H). Fabrication, Supply and fixing of Wardrobe & Open Rack. Complete Structure made up of 18mm BWP ply with 12mm BWP Ply on back side, finished with 4mm Veneer on visible faces and 0.8mm laminate on Inside usable face. Almirah to have provision of Digital locker and space for coat hanger with three shelves including coat hooks, hangers and all assecories etc all complete. Open Rack Structure made up of 18mm BWP ply finished with 4mm veneer with visible frame thickness of 45mm. Open rack to made with 4 Equal Horizontal compartments in 8mm Toughened glass. 50mm high and 18mm recessed skirting to be provided and to be finished with4mm veneer. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 62 | VDSDT1 Dining Table: 1500(W)x900(D)x750(H), Fabrication, Supply and fixingofdining table. The Dining table made out of 2nd Class Teak solid wood frame of size: 90mm x 30mm thk andthe tappered legs (4nos.) of size:70mm x 70mmthk at upper sideand 25mm x 18mm thk atbottom. The solid wood shall be KILN dried season. The product should be complete as per the reference image. Table top shall made out of 18mm Polished Italian Marble pasted over 18mm BWR ply. Edge of stone to be 38mm thick and half round edge moulded. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 63 | VDSDC1 Dining Chair: 450(D)x450(W)x950(H) Supplying and placing in position of Dining chair. chairSeat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame along with soft foamfor a comfortable seat. The seat cushion is made of75mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric of approved shade. Chair back frame and Handrest: frame and hand rest shall be mde out of 40x40mm 2nd Class Teak wood frame along with soft foamfor a comfortable back. The back cushion is made of25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric (both front and back) of approved shade . The chair havinglegsof size 40mm x 40mmthk at upper side and 25mm x 20mmthk at bottom side are made out of 2nd Class teak wood. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 64 | VVIP SUITE (7 nos.) Bedroom VVDB1 Double Bed: 2050(D)x1850(W)x300(H) Supplying and placing in position ofDouble bed . Bed box Structure made out with 18 mm BWR ply with out side 4 mm thick teak venner including all edge covered with teak wood lipping and corner joint with 50x50x mm teak wood corner round shape. Including 2 class hard wood support 4 nos. memder size70x30 mm. skarting 50 mm hight made with 18 mm PLY with 4mm thick venner and 12 mm ply on bed top. Head board made out of size 1050x 1850 mm with 18 mm BWR ply including 36 mm thick upholstered panelhaving 30 mm thick, 32 density foam covered with fabric of approved shade and design including culting design and 50mm thick, 100mm wideborder finished with 4mm teak veneeron all three sides of backboard etc all complete. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 65 | VVBST1 Bed Side Table: 400(D)x500(W)x350(H) Supplying and placing in position of of bed side table. bed side tablestructure made out with 18 mm BWR ply with 4 mm thick teak venner on visible face and 0.8mm thick laminate on all internal usable side.All visible edge to be covered with 2nd class teak wood lipping, back side covered with 6 mm ply.one fix (false) drawer in bottom and one openable drawer in top made with 12 mm BWR ply with teliscopic channel. Drawer front made 4mm thick HDMR board etc all complete. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 66 | VVS1 Single Seater Sofa: 800 (w)x800(D)x800(h) Supplying and placing in position of Single Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 67 | VVSCT1 Center Table: 1050 (w)x600(D)x450(h) Supplying and placing in position of Eleptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood / nechural woodend peper vennerlipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 68 | VVSC1Study Chair: 550(D)x550(W)x950(H) Supplying and placing in position of Study chair. chairSeat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame along with soft foamfor a comfortable seat. The seat cushion is made of75mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric of approved shade. Chair back frame and Handrest: frame and hand rest shall be mde out of 40x40mm 2nd Class Teak wood frame along with soft foamfor a comfortable back. The back cushion is made of25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric (both front and back) of approved shade . The chair havinglegsof size 40mm x 40mmthk at upper side and 25mm x 20mmthk at bottom side are made out of 2nd Class teak wood. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 69 | VVST1 Study table: 1200/1600(W)x600(D)x750(H) Supplying and placing in positionof Study table. Table topand one side support made out of 18mm thk BWR plywood with 4mm thk teak veneer. Top of the table to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of table top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 70 | VVST2Study table: 1500/1900(W)x600(D)x750(H) Providing and Placing Vvip suite Study table as per specifications |
| 71 | VVST3 Study table: 1200/1600(W)x600(D)x750(H) Providing and Placing Vvip suite Study table as per specifications |
| 72 | VVTT1 Counter Below TV Counter: :1800-2300(L)x200(D) TV Frame: :1050(W)x750(H)x75(W) Supplying and placing in position of Counter Below LED UNIT. Thestructure (top,sides , bottom ) made out of 18mm thk BWR plywood (IS:303 grade) with 4mm thk teak veneer, Top of the Counter to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of Counter top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image and LED frame for size 1050x750x75 mm made with 18mm ply with 4 mm thick venner having finished depth of 50mm. Size of frame to be suitable to accomodate selected 42" LED TV. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 73 | VVTT2 2200x200 Providing and Placing Vvip suite TV table as per specifications |
| 74 | VVDL1 Luggage Rack:1050(W)x600(D), Wall panelling with mirrior: 1050x1500mm. Supplying and placing in position of Luggage Rack andWall panelling with mirrior. Thestructure made out of 18mm thk BWR plywood with 4mm thk teak veneer. 4nos. SS Solid Stripof 6x6 mm inlayed in top of luggage rack. Visible thickness of Luggage rack of 100mm and finished with 4mm teak veneer. Wall panelling in 18mm BWP finished with 4mm veneer (band of 100mm on sides and top and 300mm in bottom) with 5mm single peice mirrior pasted on 12mm BWR ply. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 75 | VVDL2 Luggage Rack:1500(W)x600(D), Wall panelling with mirrior: 1500x1500mm. Providing and Placing Vvip suite dress luggage as per specifications |
| 76 | VVDL3 Luggage Rack:1200(W)x600(D), Wall panelling with mirrior: 1200x1500mm. Providing and Placing Vvip suite dress luggage as per specifications |
| 77 | VVA1 Wardrobe: 1050(W)x600(D)x2100(H), Fabrication, Supply and fixing of Wardrobe & Open Rack. Complete Structure made up of 18mm BWP ply with 12mm BWP Ply on back side, finished with 4mm Veneer on visible faces and 0.8mm laminate on Inside usable face. Almirah to have provision of Digital locker and space for coat hanger with three shelves including coat hooks, hangers and all assecories etc all complete. 50mm high and 18mm recessed skirting to be provided and to be finished with4mm veneer. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 78 | VVA2 Wardrobe: 1000(W)x600(D)x2100(H), Open Rack : 500(W)x600(D)x2100(H). Providing and Placing Vvip suite almirah as per specifications |
| 79 | VVA3 Wardrobe: 1200(W)x600(D)x2100(H), Providing and Placing Vvip suite almirah as per specifications |
| 80 | Livingroom VVSS1 Single Seater Sofa: 750 (w)x750(D)x800(h) Supplying and placing in position of Single Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 81 | VVSS2 2- Seater Sofa: 1600 (W)x800(D)x800(h) Supplying and placing in position of 2-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 82 | VVSSST1 Corner Table: 450(W)x450(D)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm withround shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood/ nechural woodend peper venner lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 83 | VVSCT1 Center Table: 1050 (w)x600(D)x450(h) Supplying and placing in position of Eleptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood / nechural woodend peper vennerlipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 84 | VVSDT1 Dining Table: 1500(W)x900(D)x750(H), Fabrication, Supply and fixingofdining table. The Dining table made out of 2nd Class Teak solid wood frame of size: 90mm x 30mm thk andthe tappered legs (4nos.) of size:70mm x 70mmthk at upper sideand 25mm x 18mm thk atbottom. The solid wood shall be KILN dried season. The product should be complete as per the reference image. Table top shall made out of 18mm Polished Italian Marble pasted over 18mm BWR ply. Edge of stone to be 38mm thick and half round edge moulded. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 85 | VVSDC1 Dining Chair: 450(D)x450(W)x950(H) Supplying and placing in position of Dining chair. chairSeat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame along with soft foamfor a comfortable seat. The seat cushion is made of75mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric of approved shade. Chair back frame and Handrest: frame and hand rest shall be mde out of 40x40mm 2nd Class Teak wood frame along with soft foamfor a comfortable back. The back cushion is made of25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric (both front and back) of approved shade . The chair havinglegsof size 40mm x 40mmthk at upper side and 25mm x 20mmthk at bottom side are made out of 2nd Class teak wood. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 86 | VVSTT1 Counter Below TV Counter: 1800-2300(L)x200(D) TV Frame: :1050(W)x750(H)x75(W) Supplying and placing in position of Counter Below LED UNIT. Thestructure (top,sides , bottom ) made out of 18mm thk BWR plywood (IS:303 grade) with 4mm thk teak veneer, Top of the Counter to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of Counter top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image and LED frame for size 1050x750x75 mm made with 18mm ply with 4 mm thick venner having finished depth of 50mm. Size of frame to be suitable to accomodate selected 42" LED TV. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 87 | VVSTT2 Counter Below TV Counter:1945 (L)x200(D) TV Frame: :1050(W)x750(H)x75(W) Providing and Placing Vvip suite Tv table as per specifications |
| 88 | VVSTT3 Counter Below TV Counter: 3500(L)x200(D) TV Frame: :1050(W)x750(H)x75(W) Providing and Placing Vvip suite Tv table as per specifications |
| 89 | VVSMFC1Fridge Rack: 1200/1600(W)x600(D)x750(H) Supplying and placing in positionof frige rack. Thestructure (top,sides , bottom ) made out of 18mm thk BWR plywood (IS:303 grade) with 4mm thk teak veneer.Top of the table to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of table top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image.All Internal usable sides to be finished with 0.8 mm laminate. Front Side of rack to have one portion open to accomodate 65ltr mini fridge and remaining part to have shutter with storage inside with 1 no shelve. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 90 | Library hall/confrence room LHCCMC1 Head chair Supplying, and placing in position of 360 degree revolving High back chair as per Image. This contemporary chair comprises of luxurious double padding cushion with a central indent that provides lower back support for proper posture and comfort. The central panel in the backrest is neatly stitched with a soft seat cushion finished in the same black leatherette. The Chair nestles on a shiny chrome vaulted basewith nylon castors of size 50mm . the shiny armrests come adeptly padded for comfort. Material & Subtype:Leatherette, Colour & Colour Family:Black ,Dimension(W)625mm X (D)490mm X (H)1210mm, Back Type:High Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating Height:25", Minimum Seat Height:21.25",Function: Revolving::Pneumatic Height Lift::Tilt Tension Control::Centre Tilt, Locking Mechanism:Centre Tilt. The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3 . The backrest has a foam of 28kg/m3.Warranty period 5 yrs. The manufacture should have mandatorylist of in-house machinery and testinglab facility for the chairs as per BIFMA standard (eg: (i) load impact test machine- for testing of seat plywood strength, gas lift durablity (ii) Back bar test machine- for testing of back plywood and back bar strength(iii) Castor and base testing machine- for testing the castor and base durability. (iv) complete chair testing machine- for testing of complete chair and handles strength.The leatheretteis used in the chair having the minimum costRs 500 per meter. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 91 | LHCT1 Conference Table: 31500(Running L)x750(W)x750(H) Supplying and placing in position of conference room table as per image. The table should be provided in modules of single seater / 2 seater. The dimensions for single seater should be 760mm (L) x 600mm (W) x 750mm (H) and two seater should be 1350 (L) X 600 (D) X 750 (H). The work surface top should be of thickness 32mm BWR plywood (IS:303 grade)with 0.8mm thk post laminate .The side panel are made up of 25mm thkBWR plywood with 0.8mm thk post laminate & modesty panel made out of 25mm thk BWR plywoodwith post laminate .The legs of the table should be made from 25mm BWR plywood with 0.8mm thk post laminate . The working and non working edges shall be finished with machine pressed PVC egdge banding. The wire carrier should Made from 0.8mm thick CRCA & powder coated 40-50 microns . Also provision of 6 modulefliptop box (20 nos) for the scope of USB point, Electrical Connecctions, internet connection, LAN point to be provided & metal raceway below the table topfor wire flow. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 92 | LHCC1 Side Chairs Supplying, and placing in position of 360 degree revloving high back chair as per Image.The premium upholstery is an added touch of extra class. With its supple leatherrite upholstery. Equipped with a multi- locking knee tilt mechanism and adjustable arms this chair is is high on back support and comfort.Size: (W)610mm X (D)500mm X (H)1300mm Leather: Semi Aniline Leather, Function: Revolving::Pneumatic Height Lift::Adjustable Armrest::Multilocking Knee Tilt, Maximum Seating Height: 24",Minimum Seat Height: 20.86", Base :Chrome Base, Locking Mechanism: Multi-Locking Knee Tilt.The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 30-32 kg/m3.The chair is fixed to a sleek chrome vaulted base with its individual prongs powered bynylon castors of size 55mm. Warranty period 5 yrs. The manufacture should have mandatorylist of in-house machinery and testinglab facility for the chairs as per BIFMA standard(eg: (i) load impact test machine- for testing of seat plywood strength, gas lift durablity (ii) Back bar test machine- for testing of back plywood and back bar strength (iii) Castor and base testing machine- for testing the castor and base durability. (iv) complete chair testing machine- for testing of complete chair and handles strength. The leatheris used in the chairhaving the minimum costRs 1000 per meter. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 93 | Dining hall DT1 Dining Table: 1500 (L)x900(W)x750(H) Supplying, and placing in position of dining tableas per Image . The table topare made out of 25mm thk BWR plywood (IS:303 grade) with 18mm thick Polished Italian Stone as approved. Visible thickness of Italian stone to 50mm complete with half-set jount and edge polished . The Table top supported with PVD Coated50x50mm SSbox sectionbended to achive desired shape with PVD coated 50x50mm SS box cross connectinas per shown in image. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 94 | DT2 Dining Table: 2400 (L)x900(W)x750(H) Supplying, and placing in position of dining tableas per Image |
| 95 | DT3 4-Seater Sofa : 3000 (L)x800(W)x900(H) Supplying and placing in position of 4-seaterSofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint and Exposed Legs made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 96 | DC1 Dining Chair: 550(W)x550(D)x1050(H) Supplying and placing in position of Restaurant chair upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint and Exposed round Legs (50-40mm dia) made in teak wood. The seat is made of PU ?foam with Density ?9 ?kg for 3" x 3" size and minimum 4"" thick of Cool foam or equivalent after this fabric of 32 density 1"" to 2"" as required on seat, arms & back. On top of this poly fil for shape and extra if required on seat & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 97 | DST1 Side Table: 600 (dia)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with round shape shelf in 18mm BWR ply finished with 4mmteak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood/ nechural woodend peper venner lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 98 | DTT1 Console Table: 1880 (L)x450(D)x800(H) Supplying and placing in position of console Tablefor multipurposes uses as per image. The structure of console unit shall be made of solid wood (First Class Teak) .The solid wood shall be KILN dried season . The top made up of 18 mm plywood with 4 mm teak veneer on top including top edge covered with 25x25 mm teak designer biddingand the curvature legs are made out of 40 100mm x 40mm thk at upper side & 30mm x 30mm thk at bottoam side are made out ofsolid wood (First Class Teak). The console unit having a provision of one single drawer with knob handle. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 99 | CST1 3700(L)x750(W)x800/1200(H) Supplying, and placing in position of Linear Coffee Table/Counter as per Image/drawing . The Table Structure made up of25mm thickBWR plywood (IS:303 grade). Modesty (Front & side) panel shall be of 25mm Wide, 8mm thick Teak wood strips with 10mm gapfinished with PU polished placed in straight line as per image. Table top height Shall be 750mm from thefloor level & one additional topheight 1100 mm from the floor level as per shown in image. The working counters shall be provided with 18mm Polished Italian Stone with visible edges of 50mm as per approved. All Exposed visible Surfaces to be finished with 4mm Teak Veneer and PU Polish and all Inside surface to be finished with 0.8mm Laminate, all edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.. The product should be complete as per the reference image and the specification mentioned above under the guidence ofProject Architect & Engineer Incharge. |
| 100 | V.I.P Waiting hall VWHS1 Single Seater Sofa: 800 (w)x800(D)x800(h) Supplying and placing in position of Single Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 101 | VWHST1 3- Seater Sofa: 2100 (W)x800(D)x800(h) Supplying and placing in position of 2-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 102 | VWHCT1 Corner Table: 450(W)x450(D)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm withround shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood/ nechural woodend peper venner lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 103 | VWHC1 Center Table: 1050 (w)x600(D)x450(h) Supplying and placing in position of Elliptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm burl veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick bural venner. All visible edge to be covered with 2nd Class teak wood lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 104 | VWHTT1 Console Table: 1880x300 Supplying and placing in position of console Tablefor multipurposes uses as per image. The structure of console unit shall be made of solid wood (First Class Teak) .The solid wood shall be KILN dried season . The top made up of 8 mm plywood with 4 mm teak veneer on top including top edge covered with 25x25 mm teak designer biddingand the curvature legs are made out of 100mm x 40mm thk at upper side & 30mm x 30mm thk at bottoam side are made out ofsolid wood (First Class Teak). The console unit having a provision of one single drawer with knob handle. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 105 | General Waiting GWC1/C1 Single Seater Sofa: 800 (w)x800(D)x800(h) Supplying and placing in position of Single Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise jointand Exposed frame made in teak wood. framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 106 | GWCT1/CT1 Center Table: 1050 (w)x600(D)x450(h) Supplying and placing in position of Elliptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm burl veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick bural venner. All visible edge to be covered with 2nd Class teak wood lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 107 | C.M / Governer Suite Vestibule VDS1 3- Seater Sofa: 2100 (W)x800(D)x800(h) Supplying and placing in position of 2-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 108 | VDSST3 Corner Table: 450(W)x450(D)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm withround shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood/ nechural woodend peper venner lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 109 | VSCT2 Center Table: 1050 (w)x600(D)x450(h) Supplying and placing in position of Elliptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm burl veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick bural venner. All visible edge to be covered with 2nd Class teak wood lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 110 | Drawing room DRCMC1 Single Seater Sofa: 900 (w)x900(D)x1050(h) Supplying and placing in position of Premium Single Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise jointand Exposed frame made in teak wood with Die-Cast Bronze inserts in Back, handrest, arm, legs and frames as per the Image. framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 111 | DRCMST1 Corner Table: 600(W)x600(D)x450(h) Supplying and placing in position of Corner Table as per image with Complete Structure made out of teak wood with Die-Cast Bronze inserts in leg, arms and top as per the Image. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 112 | DRCMCT1 Center Table: 1500 (w)x600(D)x450(h) Supplying and placing in position of Center Table as per image with Complete Structure made out of teak wood with hand crafted work in legs and top including Die-Cast Bronze inserts in leg, arms and top as per the Image. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 113 | DRCMDS1 Single Seater Sofa:700 (w)x700(D)x900(h) Supplying and placing in position of Single-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise jointand Exposed frame made in teak wood. framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 114 | Dining CMSDT1 Dining Table: 3000(L)x1200(W)x750(H) Supplying and placing in position of10 seater Dining table as per image. The Dining table top are made out of 42mm thk BWR plywood (IS:303 grade) with 4mm thkTeak Veneer. 6nos. of Curved legs made out of Teak wood with cross connecting members also in teak wood. All working edges shall be provided with teak wood moulding fixed using special hot melt glue at hot temperature. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 115 | CMSC1 Head Dining Chair:750 (w)x750(D)x1050(h) Supplying and placing in position of Dining Chair upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise jointand Exposed frame made in teak wood. framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 116 | CMSVC1 Dining Chair:600 (w)x600(D)x900(h) Supplying and placing in position of Dining Chair upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise jointand Exposed frame made in teak wood. framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 117 | CMSTT1 Console: 3000(L)x400(W)x450(H) Supplying and placing in position of Side Consoleas per Image. The bed side table structure (top,sides , bottom, drawer) made out of 18mm thk BWR plywood (IS:303 grade)with 4mm thk natural Teak veneer.Inner Finish: 0.8mm thk laminate. Hardware: telescopic channel, legs: round tapered First Class Teak wood finish matching to veneer as per design in First Class Teak. Moulding: as per design in First Class Teak wood. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 118 | Bedroom-1 DB1 Double Bed: 2050(D)x1850(W)x300(H) Supplying and placing in position ofDouble bed . Bed box Structure made out with complete Teak Wood with Hand Crafted carving works as per the Image.Head board made out of size1200 x 1850 mm in Teak wood with HandCrafted Carving works and Inserts ofupholstered panelhaving 30 mm thick, 32 density foam covered with fabric of approved shade and design including culting design. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 119 | BST1 Bed Side Table: 400(D)x500(W)x350(H) Supplying and placing in position of of bed side table. bed side tablestructure made out with 18 mm BWR ply with 4 mm thick teak venner on visible face and 0.8mm thick laminate on all internal usable side.All visible edge to be covered with 2nd class teak wood lipping, back side covered with 6 mm ply.two openable drawer inmade with 12 mm BWR ply with teliscopic channel. Leg with Base, Side Supports and Top to be Made out of teak wood with Die-cast Bronze inserts as per the Image. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 120 | S1 Single Seater Sofa:700 (w)x700(D)x900(h) Supplying and placing in position of Single-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise jointand Exposed frame made in teak wood. framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 121 | SCT1 Corner Table: 600(Dia)x450(h) Supplying and placing in position ofSide tableas per image. The side table top aremade out of 18mm thk BWR plywood(IS:303 grade) covered withPolished Presious Stone as approvedwithTeal Wood Frame on Border. The Legs aremade out ofsolid wood .The solid wood shall be KILN dried season . All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 122 | TT1Console: 1500(L)x400(W)x450(H) Supplying and placing in position of of TVtable. TV table StructurewithLeg with Base, Side Supports and Top to be Made out of teak wood with Die-cast Bronze inserts as per the Image. two openable drawer and 4 Shuttersmade with 12 mm BWR ply and 4mm Veneer with teliscopic channe and Soft Closer Hinges. All visible edge to be covered with 2nd class teak wood lipping, back side covered with 6 mm ply. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 123 | DL1 Luggage Rack:1500(W)x600(D), Wall panelling with mirrior: 1500x1500mm. Supplying and placing in position of Luggage Rack andWall panelling with mirrior. Thestructure made out of 18mm thk BWR plywood with 4mm thk teak veneer. 4nos. SS Solid Stripof 6x6 mm inlayed in top of luggage rack. Visible thickness of Luggage rack of 100mm and finished with 4mm teak veneer. Wall panelling in 18mm BWP finished with 4mm veneer (band of 100mm on sides and top and 300mm in bottom) with 5mm single peice mirrior pasted on 12mm BWR ply. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 124 | A1 Wardrobe: 1000(W)x600(D)x2100(H), Open Rack : 500(W)x600(D)x2100(H). Fabrication, Supply and fixing of Wardrobe & Open Rack. Complete Structure made up of 18mm BWP ply with 12mm BWP Ply on back side, finished with 4mm Veneer on visible faces and 0.8mm laminate on Inside usable face. Almirah to have provision of Digital locker and space for coat hanger with three shelves including coat hooks, hangers and all assecories etc all complete. Full Height Door Shutter to be made of PVD coated Amuninium frame with 8mm toughened frosted glass. Open Rack Structure made up of 18mm BWP ply finished with 4mm veneer with visible frame thickness of 45mm. Open rack to made with 4 Equal Horizontal compartments in 8mm Toughened glass. 50mm high and 18mm recessed skirting to be provided and to be finished with4mm veneer. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 125 | Bedroom-2 MBDB1 Double Bed: 2050(D)x1850(W)x300(H) Supplying and placing in position ofDouble bed . Bed box Structure made out with complete Teak Wood with Hand Crafted carving works as per the Image.Head board made out of size1200 x 1850 mm in Teak wood with HandCrafted Carving works and Inserts ofupholstered panelhaving 30 mm thick, 32 density foam covered with fabric of approved shade and design including culting design. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 126 | MBST1 Bed Side Table: 400(D)x500(W)x350(H) Supplying and placing in position of of bed side table. bed side tablestructure made out with 18 mm BWR ply with 4 mm thick teak venner on visible face and 0.8mm thick laminate on all internal usable side.All visible edge to be covered with 2nd class teak wood lipping, back side covered with 6 mm ply.two openable drawer inmade with 12 mm BWR ply with teliscopic channel. Leg with Base, Side Supports and Top to be Made out of teak wood with Die-cast Bronze inserts as per the Image. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 127 | MBS1 Single Seater Sofa:700 (w)x700(D)x900(h) Supplying and placing in position of Single-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise jointand Exposed frame made in teak wood. framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 128 | MBCT1 Corner Table: 600(Dia)x450(h) Supplying and placing in position ofSide tableas per image. The side table top aremade out of 18mm thk BWR plywood(IS:303 grade) covered withPolished Presious Stone as approvedwithTeal Wood Frame on Border. The Legs aremade out ofsolid wood .The solid wood shall be KILN dried season . All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 129 | MBTT1 Console: 1500(L)x400(W)x450(H) Supplying and placing in position of of TVtable. TV table StructurewithLeg with Base, Side Supports and Top to be Made out of teak wood with Die-cast Bronze inserts as per the Image. two openable drawer and 4 Shuttersmade with 12 mm BWR ply and 4mm Veneer with teliscopic channe and Soft Closer Hinges. All visible edge to be covered with 2nd class teak wood lipping, back side covered with 6 mm ply. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 130 | MBDL1 Luggage Rack:1500(W)x600(D), Wall panelling with mirrior: 1500x1500mm. Supplying and placing in position of Luggage Rack andWall panelling with mirrior. Thestructure made out of 18mm thk BWR plywood with 4mm thk teak veneer. 4nos. SS Solid Stripof 6x6 mm inlayed in top of luggage rack. Visible thickness of Luggage rack of 100mm and finished with 4mm teak veneer. Wall panelling in 18mm BWP finished with 4mm veneer (band of 100mm on sides and top and 300mm in bottom) with 5mm single peice mirrior pasted on 12mm BWR ply. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 131 | MBA1 Wardrobe: 1000(W)x600(D)x2100(H), Open Rack : 500(W)x600(D)x2100(H). Fabrication, Supply and fixing of Wardrobe & Open Rack. Complete Structure made up of 18mm BWP ply with 12mm BWP Ply on back side, finished with 4mm Veneer on visible faces and 0.8mm laminate on Inside usable face. Almirah to have provision of Digital locker and space for coat hanger with three shelves including coat hooks, hangers and all assecories etc all complete. Full Height Door Shutter to be made of PVD coated Amuninium frame with 8mm toughened frosted glass. Open Rack Structure made up of 18mm BWP ply finished with 4mm veneer with visible frame thickness of 45mm. Open rack to made with 4 Equal Horizontal compartments in 8mm Toughened glass. 50mm high and 18mm recessed skirting to be provided and to be finished with4mm veneer. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 132 | CM /Governer office CMS1 2- Seater Sofa: 1800 (w)x800(D)x900(h) Supplying and placing in position of2 seater sofaupholstered with leatherette as per image. The contemporary design is boldly finished in a leatherette upholstery that covers the cushioned seat for a truly invigourating experience. The panelled back cushions offer great lumbar support for the lower back. The curved arms flow effortlessly into the base of the sofa for a uniform structure giving it a seamless finish.The sofa sits strong on pvc legs that are made to last. The sofaframe is constructed using pine wood along with soft foamfor a comfortable seat. The seat cushion is madeoffoamdensity 35-38kg/ m3 .The sofa with contoured shape with complete back support , back upholsteredwith leatheretteand cushing .Seating height of the sofa 460mm from the floor level.The leathertteis used in the sofa having the minimum costRs 500 per meter . The product should be complete as per the reference image and the specification mentioned aboveunder the guidence ofproject Architect & Engineer Incharge. |
| 133 | CMVS1 Single Seater Sofa: 900 (w)x800(D)x900(h) Supplying and placing in position ofSingle seater sofaupholstered with leatherette as per image. The contemporary design is boldly finished in a leatherette upholstery that covers the cushioned seat for a truly invigourating experience. The panelled back cushions offer great lumbar support for the lower back. The curved arms flow effortlessly into the base of the sofa for a uniform structure giving it a seamless finish.The sofa sits strong on pvc legs that are made to last. The sofaframe is constructed using pine wood along with soft foamfor a comfortable seat. The seat cushion is madeoffoamdensity 35-38kg/ m3 .The sofa with contoured shape with complete back support , back upholsteredwith leatheretteand cushing .Seating height of the sofa 460mm from the floor level.The leathertteis used in the sofa having the minimum costRs 500 per meter . The product should be complete as per the reference image and the specification mentioned aboveunder the guidence ofproject Architect & Engineer Incharge. |
| 134 | CMST1 Corner Table: 450(Dia)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm withround shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood/ nechural woodend peper venner lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 135 | CMCT1 Center Table: 1050 (w)x600(D)x450(h) Supplying and placing in position of Eleptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood / nechural woodend peper vennerlipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 136 | CMC1 High Back Chair: 600(W)x550(D)x1300(H) Supplying, and placing in position of 360 degree revloving high back chair as per Image.The premium upholstery is an added touch of extra class. With its supple leatherette upholstery. Equipped with a multi- locking knee tilt mechanism and adjustable arms this chair is is high on back support and comfort.Size: (W)610mm X (D)500mm X (H)1300mm Leatherrette: Semi Aniline Leather, Function: Revolving::Pneumatic Height Lift::Adjustable Armrest::Multilocking Knee Tilt, Maximum Seating Height: 24",Minimum Seat Height: 20.86", Base :Chrome Base, Locking Mechanism: Multi-Locking Knee Tilt.The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 30-32 kg/m3.The chair is fixed to a sleek chrome vaulted base with its individual prongs powered bynylon castors of size 55mm. Warranty period 5 yrs. The manufacture should have mandatorylist of in-house machinery and testinglab facility for the chairs as per BIFMA standard(eg: (i) load impact test machine- for testing of seat plywood strength, gas lift durablity (ii) Back bar test machine- for testing of back plywood and back bar strength (iii) Castor and base testing machine- for testing the castor and base durability. (iv) complete chair testing machine- for testing of complete chair and handles strength. The leatheris used in the chairhaving the minimum costRs 1000 per meter.The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 137 | CMCT2 Main Table: 2700(L)x1000(W)x750(H) Supplying and placing in position ofOffice table as per image. Thetable top are made out of 42mm thk BWR plywood (IS:303 grade) with 4mm thk Veneer. Modesty and side panel to be made up of 2mm thk BWR plywood (IS:303 grade) with 4mm thk Veneer.All working edges shall be provided with teak wood moulding fixed using special hot melt glue at hot temperature. Complete as per image including raised and filled work and teak wood and veneer. Table to to have provision of Letherlitte panel. All Visible Veneer/Wood surfacesto finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The wire carrier should Made from 0.8mm thick CRCA & powder coated 40-50 microns . Also provision of 6 modulefliptop box (2 nos) for the scope of USB point, Electrical Connecctions, internet connection, LAN point to be provided & metal raceway below the table topfor wire flow. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 138 | VC1 Mid Back Chair: 600(W)x550(D)x1000(H) Supplying and placing in position of 360 degrees Revolving Medium Back chair of size :- (W)660mm X (D)508mm X (H)1092mm upholstered with soft touch leatherrette upholstery. The ultra soft cushions , side bolsters and lumbar bolsters for maximum support. The chair shall be provisioned with extra padded wooden mahagony handles for comfort.Provision of soft touch leather upholstery and ultra soft cushions. The chair has wooden base with hard tread Castors. The Seat and back are made up of 14 mm thick hot pressed ply wood upholstered with PVC,with polyurethane foam. The chair having soft touch and ergonomically designed seat and back for extra comfort. Chair seat has foam of density 45 (+/-2kg /m3) . The backrest has a foam of 28 (+/-2kg /m3). The prong (base) is made of wooden and fitted with 5nos. twin wheel castors (castor wheel dia. 50mm). The prong (base) is 700mm pitch center dia (740mm with castors). The telescopic bellows is 3 piece telescopic type and injection molded in black polyurethane. The pneumatic height adjustment shall have adjustment stroke of 75mm and shall be operated at 30kgs extension force. Warranty period 5 yrs. The manufacture should have mandatorylist of in-house machinery and testinglab facility for the chairs as per BIFMA standard(eg: (i) load impact test machine- for testing of seat plywood strength, gas lift durablity (ii) Back bar test machine- for testing of back plywood and back bar strength (iii) Castor and base testing machine- for testing the castor and base durability. (iv) complete chair testing machine- for testing of complete chair and handles strength.Theleatheris used in the chairhaving the minimum costRs 1000 per meter.The product should be complete as per the reference imageand the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 139 | CM Metting room MRCMC1 Head High Back revolving chair Supplying, and placing in position of 360 degree revolving High back chair as per Image. This contemporary chair comprises of luxurious double padding cushion with a central indent that provides lower back support for proper posture and comfort. The central panel in the backrest is neatly stitched with a soft seat cushion finished in the same black leatherette. The Chair nestles on a shiny chrome vaulted basewith nylon castors of size 50mm . the shiny armrests come adeptly padded for comfort. Material & Subtype:Leatherette, Colour & Colour Family:Black ,Dimension(W)625mm X (D)490mm X (H)1210mm, Back Type:High Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating Height:25", Minimum Seat Height:21.25",Function: Revolving::Pneumatic Height Lift::Tilt Tension Control::Centre Tilt, Locking Mechanism:Centre Tilt. The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3 . The backrest has a foam of 28kg/m3.Warranty period 5 yrs. The manufacture should have mandatorylist of in-house machinery and testinglab facility for the chairs as per BIFMA standard (eg: (i) load impact test machine- for testing of seat plywood strength, gas lift durablity (ii) Back bar test machine- for testing of back plywood and back bar strength(iii) Castor and base testing machine- for testing the castor and base durability. (iv) complete chair testing machine- for testing of complete chair and handles strength.The leatheretteis used in the chair having the minimum costRs 500 per meter. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 140 | MRC1 Mid Back revolving chair Supplying, and placing in position of 360 degree revloving high back chair as per Image.The premium upholstery is an added touch of extra class. With its supple leatherrite upholstery. Equipped with a multi- locking knee tilt mechanism and adjustable arms this chair is is high on back support and comfort.Size: (W)610mm X (D)500mm X (H)1300mm Leather: Semi Aniline Leather, Function: Revolving::Pneumatic Height Lift::Adjustable Armrest::Multilocking Knee Tilt, Maximum Seating Height: 24",Minimum Seat Height: 20.86", Base :Chrome Base, Locking Mechanism: Multi-Locking Knee Tilt.The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 30-32 kg/m3.The chair is fixed to a sleek chrome vaulted base with its individual prongs powered bynylon castors of size 55mm. Warranty period 5 yrs. The manufacture should have mandatorylist of in-house machinery and testinglab facility for the chairs as per BIFMA standard(eg: (i) load impact test machine- for testing of seat plywood strength, gas lift durablity (ii) Back bar test machine- for testing of back plywood and back bar strength (iii) Castor and base testing machine- for testing the castor and base durability. (iv) complete chair testing machine- for testing of complete chair and handles strength. The leatheris used in the chairhaving the minimum costRs 1000 per meter. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 141 | MRT1 Conference Table: 4150 (L)x1500(W)x750(H) Supplying and placing in position of Meeting room table as per image. Thetable top are made out of 42mm thk BWR plywood (IS:303 grade) with 4mm thk Veneer. Modesty /Support Legto be made up of 42mm thk BWR plywood (IS:303 grade) with 4mm thk Veneer.All working edges shall be provided with teak wood moulding fixed using special hot melt glue at hot temperature. All Visible Veneer/Wood surfacesto finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The wire carrier should Made from 0.8mm thick CRCA & powder coated 40-50 microns . Also provision of 6 modulefliptop box (11 nos) for the scope of USB point, Electrical Connecctions, internet connection, LAN point to be provided & metal raceway below the table topfor wire flow. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 142 | MRTT1 Console Table: 1880 (L)x450(D)x800(H) Supplying and placing in position of console Tablefor multipurposes uses as per image. The structure of console unit shall be made of solid wood (First Class Teak) .The solid wood shall be KILN dried season . The top made up of18 mm plywood with 4 mm teak veneer on top including top edge covered with 25x25 mm teak designer biddingand the curvature legs are made out of 40 100mm x 40mm thk at upper side & 30mm x 30mm thk at bottoam side are made out ofsolid wood (First Class Teak). The console unit having a provision of one single drawer with knob handle. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 143 | Chief Justice/Chief Secratory Suite Living room CLRS1 2- Seater Sofa: 1600 (W)x800(D)x800(h) Supplying and placing in position of 2-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 144 | CLRS2 3- Seater Sofa: 2200 (W)x800(D)x800(h) Supplying and placing in position of 3- Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 145 | CLRST1 Corner Table: 450x450 (LxW)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with round shape shelf in 18mm BWR ply finished with 4mmteak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood/ nechural woodend peper venner lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 146 | CLRCT1 Center Table: 1050 (w)x600(D)x450(h) Supplying and placing in position of Eleptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm teak veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick METALLO MAPPA bural venner. All visible edge to be covered with 2nd Class teak wood / nechural woodend peper vennerlipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 147 | CLRTT1:1500(w)x400(D)x800(h) Supplying, and placing in position oftv credenza as per image . Storage unithaving2nos Openable shutters with shelf and 2 nos drawer provision as per shown in image. The modular storage unit top shall be made from 18 mm thickBWR plywood (IS:303 grade)with4mm Veneer and rest of the sides as well as shelves and shutter, drawer to be made up of 18 mm thick BWR plywood with4mm Veneer while back to be made of 8 mm thick BWRplywood. All edges to be provided with Teak wood lipping. . The storage unithavingPVD Finish SS legs.All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 148 | Dining hall CDT1 Dining Table: 1800(W)x900(D)x750(H), Fabrication, Supply and fixingofdining table. The Dining table made out of 2nd Class Teak solid wood frame of size: 90mm x 30mm thk andthe tappered legs (4nos.) of size:70mm x 70mmthk at upper sideand 25mm x 18mm thk atbottom. The solid wood shall be KILN dried season. The product should be complete as per the reference image. Table top shall made out of 18mm Polished Italian Marble pasted over 18mm BWR ply. Edge of stone to be 38mm thick and half round edge moulded. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 149 | CDC1/VDC1 Dining Chair: 450(D)x450(W)x950(H) Supplying and placing in position of Dining chair. chairSeat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame along with soft foamfor a comfortable seat. The seat cushion is made of75mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric of approved shade. Chair back frame and Handrest: frame and hand rest shall be mde out of 40x40mm 2nd Class Teak wood frame along with soft foamfor a comfortable back. The back cushion is made of25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric (both front and back) of approved shade . The chair havinglegsof size 40mm x 40mmthk at upper side and 25mm x 20mmthk at bottom side are made out of 2nd Class teak wood. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 150 | CMFC1 Fridge Rack: 1200/1600(W)x600(D)x750(H) Supplying and placing in positionof frige rack. Thestructure (top,sides , bottom ) made out of 18mm thk BWR plywood (IS:303 grade) with 4mm thk teak veneer.Top of the table to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of table top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image.All Internal usable sides to be finished with 0.8 mm laminate. Front Side of rack to have one portion open to accomodate 65ltr mini fridge and remaining part to have shutter with storage inside with 1 no shelve. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 151 | Bedroom CSDB1 Double Bed: 2050(D)x1850(W)x300(H) Supplying and placing in position ofDouble bed . Bed box Structure made out with 18 mm BWR ply with out side 12mm thick MDF Flutes including Top edge covered with 50mm teak wood lipping and corner joint with 50x50x mm teak wood corner round shape. Including 2 class hard wood support 4 nos. memder size70x30 mm. skarting 50 mm hight made with 18 mm PLY with 4mm thick venner and 12 mm ply on bed top. Head board made out of size 1050x 1850 mm with 18 mm BWR ply including 36 mm thick upholstered panelhaving 30 mm thick, 32 density foam covered with fabric of approved shade and design including culting design and 50mm thick, 100mm wideborder finished with 12mm MDF Fluteson all three sides of backboard with Metal Insertetc all complete as per the image. All Visible MDF/Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 152 | CSBST1 Bed Side Table: 400(D)x500(W)x350(H) Supplying and placing in position of of bed side table. bed side tablestructure made out with 18 mm BWR ply with 4 mm thick teak venner on visible face and 0.8mm thick laminate on all internal usable side.All visible edge to be covered with 2nd class teak wood lipping, back side covered with 6 mm ply.one fix (false) drawer in bottom and one openable drawer in top made with 12 mm BWR ply with teliscopic channel. Drawer front made 12mm thick MDF Flutes etc all complete. All Visible MDF/Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 153 | CSS1 Single Seater Sofa: 800 (w)x800(D)x800(h) Supplying and placing in position of Single Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 154 | CSS2 2- Seater Sofa: 1600(W)x800(D)x800(h) Supplying and placing in position of 2-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 155 | CSS3 3- Seater Sofa: 2200 (W)x800(D)x800(h) Supplying and placing in position of 3-Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 156 | CSS4 Single Seater Sofa: 800 (w)x800(D)x800(h) Supplying and placing in position of Single Seater Sofa upholstered with fire retardantfabricas per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms & back. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 157 | CSCT1: 1050 (w)x600(D)x450(h) Supplying and placing in position of Elliptical Center Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm burl veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick bural venner. All visible edge to be covered with 2nd Class teak wood lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 158 | CSSST1 : 450x450 (LxW)x450(h) Supplying and placing in position of Corner Table with Structure made out of teak wood curved shaped leg member of size 70x30 mm and 4 connecting Teak wood member of size 45x30 mm with elleptical shape shelf in 18mm BWR ply finished with 4mm burl veneer. Table top made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total thicknes to 36 mm with 4 mm thick bural venner. All visible edge to be covered with 2nd Class teak wood lipping etc all complete. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 159 | CSSC1: Study Chair 550(W)x550(D)x950(H) "Supplying and placing in position of Study chair. chairSeat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame along with soft foamfor a comfortable seat. The seat cushion is made of75mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric of approved shade. Chair back frame and Handrest: frame and hand rest shall be mde out of 40x40mm 2nd Class Teak wood frame along with soft foamfor a comfortable back. The back cushion is made of25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardent fabric (both front and back) of approved shade . The chair havinglegsof size 40mm x 40mmthk at upper side and 25mm x 20mmthk at bottom side are made out of 2nd Class teak wood. All Visible Veneer/Wood surfaces (except table top) to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). Table top to be finish with high gloss polyaster 8 coat or more omplete to achive desired shade and finish. The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge." |
| 160 | CSST1 Study table: 1200/1600(W)x600(D)x750(H) "Supplying and placing in positionof Study table. Table topand one side support made out of 18mm thk BWR plywood with 4mm thk teak veneer. Top of the table to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of table top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge." Table topand one side support made out of 18mm thk BWR plywood with 4mm thk teak veneer. Top of the table to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of table top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 161 | CSST2 Study table: 1500/1900(W)x600(D)x750(H) Supplying and placing in positionof Study table. |
| 162 | CSTT1 Counter Below TV Counter: :2900(L)x200(D) TV Frame: :1050(W)x750(H)x75(W) Supplying and placing in position of Counter Below LED UNIT. Thestructure (top,sides , bottom ) made out of 18mm thk BWR plywood (IS:303 grade) with 4mm thk teak veneer, Top of the Counter to be finished finished with 8mm Acrylic solid surface (Corian) with rounded corner and all diffused joints. Front edge of Counter top to have 50mm visible thickness of Acrylic Solid surface and 75mm of veneer complete as per image and LED frame for size 1050x750x75 mm made with 18mm ply with 4 mm thick venner having finished depth of 50mm. Size of frame to be suitable to accomodate selected 42" LED TV. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 163 | CSTT2 Counter Below TV Counter: :2500(L)x200(D) TV Frame: :1050(W)x750(H)x75(W) Supplying and placing in position of Counter Below LED UNIT. |
| 164 | CSDL1 Luggage Rack:1040(W)x600(D), Wall panelling with mirrior: 1040x1500mm. Supplying and placing in position of Luggage Rack andWall panelling with mirrior. Thestructure made out of 18mm thk BWR plywood with 4mm thk teak veneer. 4nos. SS Solid Stripof 6x6 mm inlayed in top of luggage rack. Visible thickness of Luggage rack of 100mm and finished with 4mm teak veneer. Wall panelling in 18mm BWP finished with 4mm veneer (band of 100mm on sides and top and 300mm in bottom) with 5mm single peice mirrior pasted on 12mm BWR ply. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 165 | CSDL2 Luggage Rack:925(W)x600(D), Wall panelling with mirrior: 925x1500mm. Supplying and placing in position of Luggage Rack andWall panelling with mirrior. |
| 166 | CSDL3 Luggage Rack:1400(W)x600(D), Wall panelling with mirrior: 1400x1500mm. Supplying and placing in position of Luggage Rack andWall panelling with mirrior. |
| 167 | CSA1 Wardrobe: 1065(W)x600(D)x2100(H), Fabrication, Supply and fixing of Wardrobe & Open Rack. Complete Structure made up of 18mm BWP ply with 12mm BWP Ply on back side, finished with 4mm Veneer on visible faces and 0.8mm laminate on Inside usable face. Almirah to have provision of Digital locker and space for coat hanger with three shelves including coat hooks, hangers and all assecories etc all complete. Open Rack Structure made up of 18mm BWP ply finished with 4mm veneer with visible frame thickness of 45mm. Open rack to made with 4 Equal Horizontal compartments in 8mm Toughened glass. 50mm high and 18mm recessed skirting to be provided and to be finished with4mm veneer. All Visible Veneer/Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive desired shade and finish). The product should be complete as per the reference image and the specification mentioned above under the guidence ofproject Architect & Engineer Incharge. |
| 168 | CSA2 Wardrobe: 925(W)x600(D)x2100(H) Fabrication, Supply and fixing of Wardrobe & Open Rack. |
| 169 | CSA3 Wardrobe:1000(W)x600(D)x2100(H), Open Rack :500(W)x600(D)x2100(H). Fabrication, Supply and fixing of Wardrobe & Open Rack. |
| 170 | Furnishing works Stitching, Supply andInstallationofBlackout curtains with ripple fold with fabric of 100% Polyester, 180 GSM, 54" width of approved shade complete with channels, strings and accessories. Basic cost of fabric: per rmt (make: D"décor/Masper) |
| 171 | Stitching, Supply andInstallationofshear curtains with ripple fold with fabric of 100% Polyester, 120 GSM, 54" width of approved shade complete with channels, strings and accessories. Basic cost of fabric: per rmt (make: D"décor/Masper) |
| 172 | Providing and Placing in position Pillow 1000 gms (20 X 30 inch ) of Polyfil, 1000 Gsm material as approved. (make: D"décor/Masper) |
| 173 | Providing and Placing in position Pillow Cover 300 TC Stripe 21 X 31inch made of 100% Cotton, 300 Thread Count of colours, shade and design as approved. Basic cost of fabric: per rmt (make: D"décor/Masper) |
| 174 | Providing and Placing in position Pillow 420 gms (15 X 15 inch ) of Polyfil, 1000 Gsm material as approved. (make: D"décor/Masper) |
| 175 | Providing and Placing in position Pillow Cover 300 TC Stripe 16 X 16inch made of 100% Cotton, 300 Thread Count of colours, shade and design as approved. Basic cost of fabric: per rmt (make: D"décor/Masper) |
| 176 | Providing and Placing in position Bed Sheet 300 TC Stripe 108" X 108" made of 100% Cotton, 300 Thread Count of colours, shade and design as approved. (make: D"décor/Masper) |
| 177 | Providing and Placing Duvets of 200 GSM Polyfill quilted with 10" square Box of size 100" x 100" as approved. (make: D"décor/Masper) |
| 178 | Providing and Placing Duvets covers of 300 T.C 100% Cotton, 300 Thread Count of colours, shade and design as approved. (make: D"décor/Masper) |
| 179 | Providing and Placing Soft Shaggy Rugs, Decorative Carpet, 2-inch Thick Carpet of Size 4x6 feet. |
| 180 | Cutting and Pasting of wallpaper on prepared wall surface to give desired finish. Recyclable wall paper not less than 180GSM and 225 Micron thickness. Alpha Cellulose base and Eco Solvant Matt Coating, Finish on Internal Level wall, Eco-Solvent Latex and UV Compatable Ink, Scratch resistant coating smooth matte surface suitable for indoor application with Low VOC content. |
| 181 | Providing and Placing LG Mini Refrigerator, 45L GL-M051RSWC (White) |
| 182 | Providing and Placing Samsung 108 cm (43 Inches) Wondertainment Series Full HD LED Smart TV UA43TE50AAKXXL (Titan Gray) |
| 183 | Providing and Placing Prestige Electric Kettle PKOSS - 1500watts, Steel (1.5Ltr), Black |
| 184 | Providing and Placing in position "Bath Towel" of size 40x64 inches, 550 Gsm, 100% cotton as approved. (make: D"décor/Masper) |
| 185 | Providing and Placing in position "Hand Towel" of size 12x40inches, 550 Gsm, 100% cotton as approved. (make: D"décor/Masper) |
| 186 | Providingand Placingin position PocketedSpring Mattress 8" (78"x72"), comprisingof Pocket springs with Border wire 180mm, Filler material shallbe Quilted Polyfill & comfort foam, wrapped in FR Fabric both sides. |
| 187 | Providing and Fixing Custom Curtain M Tracks max track length 15feet having min. weight 1Kgs, ultra slick runner, premium powder coated white with wall and ceiling brackets. Suitable for Solid and Sheer curtains. |
| 188 | Providing and Fixing Custom Print Roller Blinds- Top Tube extruded by none rusting Aluminium alloy with 1.25 mm thickness in 32, 38 & 45 mm diameters respectively.Control unit mechanism made by high strength ABS plastic,The Universal Brackets are made by mild steel with powder coating to give greater finish. Blackout Fabric made of PES100% with acrylic coating resistant to Cracking & Fraying.Ball chain made by unbreakable Polyethylene plastic, 1.50 mm Nylon cord with 4.50 mm balls, Fabric covered Rectangle Bottom Channel.Min. printing area 300mm x300mm , Max. Printing area 2500mmx3500mm |
| 189 | Providing and Fixing Custom Print Roller Blinds- Top Tube extruded by none rusting Aluminium alloy with 1.25 mm thickness in 32, 38 & 45 mm diameters respectively.Control unit mechanism made by high strength ABS plastic,The Universal Brackets are made by mild steel with powder coating to give greater finish.Translucent Fabric made of PES100% with acrylic coating resistant to Cracking & Fraying.Ball chain made by unbreakable Polyethylene plastic, 1.50 mm Nylon cord with 4.50 mm balls, Fabric covered Rectangle Bottom Min. printing area 300mm x300mm , Max. Printing area 2500mmx3500mm |
| 190 | Art works Design, Manufacture and painting of Folk/Traditional/Modern Art Work on canvas or paper as per instruction of Engineer- Incharge |
| 191 | Design, Manufacture ofPhotographyArt Work on canvas or paper as per instruction of Engineer- Incharge |
| 192 | Design, Manufacture and painting of Boutique and fabric art work as per instruction of Engineer- Incharge |
| 193 | Design Manufacture supply and Installation of Sculpture with Stone & S.S.. Approx Height 1000-1500mm as per instruction of Engineer- Incharge |
| 194 | Design Manufacture supply and Installation of Sculpture with Stone & Marble Approx Height 1000-1500mm as per instruction of Engineer- Incharge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
