Tender For Supply,Installation And Commissioning Of 41 Hp Solar Submersible Pump
Tender Overview
Project Description
Supply, Installation And Commissioning Of 41 Hp Solar Submersible Pump , Supply Installation And Commissioning Of High Efficiency ( Not Less Then 15% ) Poly / Mono Crysteline Pv Module With Rf Id Pasted Inside, 335 W Or Above , Supply Installation And Commissioning Of Hot Dip Galvanized Iron Mounting Structure , Supply Installation Testingand Commissioningof Variable Frequency Drive ( Vfd ) Solar Pump Controller For Solar Power Based Devices Input-580-790 Vdc, Output-415Vac, 50Hz, 75Amp Phase 3-Ph Including Solar Pump Rms And Grid System , Changover Stand Alone Panel Enclosure . , Supply Of Three Cores 25 Sq Qmminsulated Copper Cables Pvc Uv Resistance Low Temperature Poly Ethylene With Requirerd Size And Length Ofhdpe Plb Duct Pipe As Per Site Requirement. , Supply Of Single Core Insulated 6 Sq Mm Single Core Copper Cables Pvc Uv Resistance Low Temperature Poly Ethylene. Cables , Supply Of Array Junction Box Ip 65 With Fuse , Surge Protection And Diode. , Supply Of Protection Equipment Like Chemical Earthing And Lightening Arrester , Supply Installationtesting Commissioning Of 41 Hp Submersible Pump Discharge 46000 Lph , Head 180 Meter, 50Hz, And Including Ms Pipe And All Fitting Accessories Up To Nrv , Construction Of Pump Holding Mild Steel Structure ( Angles / Channels ) Including Supply And Fabrication / Welding As Per Site Conditions ( Easily Mountable ) For Carrying A Weight Of Approximate 1.50 Tons Along With Necessary Pump Fitting Pipes ( M.Steel / G.I ) Including Steel Wire Ropes ( 12 To 16 Mm Dia. ) Hangers And All Other Necessary Fittings Required And Confirming / Compatible With Pressure Ratings Of Pe-100, Pn -16. , Earth Work In Excavation In Trench Cutting Up To 1.0Mtr And Back Filling , Supply / Providing / Laying / Fitting In Line And Alignment Of Hdpe Flanged Pipe ( 125Mm Dia ) And Material Grade Pn 16 Pe 100 As Per Design Suitability Including Providing Of Gasket / Washers In Between Joints / Fixing With Mild Steel Bolt Including Providing Of All Fittings / Bends / Accessories And Including Necessary Cutting In Earth / Rock Work In All Classification And Construction Of 40 Nos Of Pipe Anchor / Saddle Block In Rcc M-20 Grade , Supply / Providing / Laying / Fitting In Line And Alignment Of Nrv Pe100 Pn 16 Including Making Necessary Jointing With Hdpe Pipes With Flange And All Fixture ( Complete Job ) , Supply Pressure Release Valve Pn 16 Dn As Per Requirement And Accessories For Installation , Supply Air Valve With Isolation Valve Pn 16 Dn As Per Site Requirement And Accessories For Installation , Supply Of 100 Watt Semi Integrated Solar Street Light Including All Acessories
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Jan-2023 | Extention of Bid Submission End Date | Date | 13-Jan-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply installation and commissioning of high efficiency (not less then 15%) poly/mono crysteline PV module with RF ID pasted inside,335 w or above |
| 2 | Supply installation and commissioning of hot dip galvanized iron mounting structure |
| 3 | Supply installation testingand commissioningof Variable frequency drive (VFD) solar pump controller for solar power based devices input-580-790 VDC,output-415VAC, 50Hz,75Amp phase 3-ph including solar pump RMS and Grid system ,changover stand alone panel enclosure . |
| 4 | Supply of three cores 25 sq qmminsulated copper cables PVC UV Resistance low temperature poly ethylene with requirerd size and length ofHDPE PLB Duct pipe as per site requirement. |
| 5 | Supply of single core insulated 6 sq mm single core copper cables PVC UV Resistance low temperature poly ethylene. Cables |
| 6 | Supply of array junction box IP 65 with fuse , surge protection and diode. |
| 7 | Supply of protection equipment like chemical earthing and lightening arrester |
| 8 | Supply installationtesting commissioning of 41 Hp submersible pump discharge 46000 LPH ,Head 180 meter,50Hz, and including ms pipe and all fitting accessories up to NRV |
| 9 | Construction of Pump holding Mild steel structure (angles/ channels ) including supply and fabrication / welding as per site conditions ( easily mountable) for carrying a weight of approximate 1.50 tons along with necessary pump fitting pipes ( M.Steel/ G.I) including steel wire ropes (12 TO 16 MM Dia.) hangers and all other necessary fittings required and confirming / compatible with pressure ratings of PE-100, PN -16. |
| 10 | Earth work in excavation in trench cutting up to 1.0mtr and back filling |
| 11 | Supply / providing /laying / fitting in line and alignment of HDPE flanged Pipe ( 125mm Dia)and material grade PN 16 PE 100 as per design suitability including providing of Gasket/ washers in between joints / fixing with mild Steel bolt including providing of all fittings / bends / accessories and including necessary cutting in earth/rock work in all classification and construction of 40 Nos of pipe anchor/ saddle block in RCC M-20 Grade |
| 12 | Supply/providing/laying/fitting in line and alignment of NRV PE100 PN 16 including making necessary jointing with HDPE pipes with flange and all fixture(complete job) |
| 13 | Supply pressure release valve PN 16 DN as per requirement and accessories for installation |
| 14 | Supply Air Valve with Isolation Valve PN 16 DN as per site requirement and accessories for installation |
| 15 | Supply of 100 watt semi integrated solar street light including all acessories |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender