Tender For Renovation Of A Deluxe Room As Mock Up Room At Raindrops Chennai
Tender Value
8.69 Lakhs
Estimated cost
Bid Submission
20 Jan 2023
0 days left
EMD
21800
Bank guarantee accepted
Document Fee
2124
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation Of A Deluxe Room As Mock Up Room At Raindrops Chennai
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | 2.35.4.1 : Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion):Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement :2 coarse sand ) to the full depth of the hole:With Chlorpyriphos /Lindane E.C 20% with 1% concentration |
| 3 | 6.38 : Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above floor 2level up to floorV level in cement mortar 1:4 (1 cement :4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. |
| 4 | 8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm |
| 5 | 11.56.1 : Providing and laying Polished Granite stone flooring in required design andpatterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed withcement slurry and pointing with white cement slurry admixed with pigment ofmatching shade including rubbing , curing and polishing etc. all complete asspecified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 6 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. |
| 7 | 11.48.2 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm |
| 8 | 8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete. |
| 9 | 11.41.4 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1000x1000 mm |
| 10 | 13.9.1 : Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster |
| 11 | 15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 12 | 15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below |
| 13 | 15.25 : Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 14 | 15.60 : Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved |
| 15 | od247067/2022_2023 : Providing and fixing wood panelled door to detail with 100m x 63mm frames and 40mm thick panelled design shutters with 100m x 40mm styles and top rail, 150mm x 40mm bottom rail, 150m x 40m lock rail, housed into the frames, complete, including making necessary grooves for fixing door shutters and coating with antitermite onunexposed surfaces and applying melamine polish to the door frame with shutters etc complete as per drawing and specifications. Second class teak wood(a) Brass Butt hinges 125mm x 30mm with Nylon washer - 3 Nos.(b) Brass Tower Bolt 250mm x 12mm - 1 No.(c) Brass Tower Bolt 200mm x 12mm - 1 No.(d) Handles 'D' Type 150mm size - 2 Nos.(e) Rubber Bush 40mm dia x 60mm long - 1 No.(f) Brass Door stopper with Rubber shoe - 1 No.The furniture and fittings shall be fixed in the shutter / frame using Brass screws. The rate shall be inclusive of cost of materials, labour charges etc. All the materials to be used on the work shall be got approved by The Engineer-in-charge before actual use on work. |
| 16 | od247285/2022_2023 : Providing and fixing Second Class Teakwood door frame of size 100 mm X 63 mm and 37mm thick flush shutter with 3.5mm thick Veener on front side and back side PVC Sheet etc., all complete as directed. Includingof approved make and shade melamine polish etc. all complete as directed. Note: 4mm thick groove with SS Strip finish at every 1ft height onfront sides of the shutter. SS matt finish Butt hinges 125mm x 30mm with Nylon washer - 3 Nos. SS matt finish Tower Bolt 200mm x 12mm - 1 No. Rubber Bush 40mm dia x 60mm long - 1 No. SS matt finishDoor stopper with Rubber shoe - 1 No. SS Cylindrical (Both side) Lock - 1 NoThe furniture and fittings shall be fixed in the shutter / frame using Brass screws. The rate shall be inclusive of cost of materials, labour charges etc. All the materials to be used on the work shall be got approved by The Engineer-in-charge before actual use on work. |
| 17 | od247876/2022_2023 : Surface Preparation:Providing and laying water proofing treatment to horizontal and vertical surfaces ofpodium slabs, including cleaning the surface with wire brush, treating all surface cracks, construction joints and honeycombs by grouting with specialised non shrink grout,coving preparation at wall - slab joint and preparation of surface in all aspects to receive the waterproofingBore Packing / Core Cut Treatment: Providing and sealing the gaps in the core cuts around PVC pipes treatedwith SBR bonding agent & sprinkled sand; using a non shrink grout ArmGrout M 50 or equivalent offollowed by sealing of the same joint by using Joint Tape SealArm Joint Tape 2000 or equivalent with Epoxy adhesive. Coving: Providing and Applying at the junction of slab and vertical offsets with Cement Mortar 1:4 and admixed with SBRat dosage of 5 litre per 50kg cement. (cement and sand shall be supplied by the main contractor)Waterproofing Coating-Providing and applyingtwo compoent acrylic cementitious coating AquaArm TG of MYK Arment or equivalent witha coverage of 2.0 kg /m2 .The coating shall be taken upto 300mm from finished floor level on the vertical walls.The coating shall have an elonagtion of 40%,Shore A hardness of 90,Tensile strength of 0.86 N/mm2.Protective Plaster: providing and laying avg. 15 mm thick, CM 1:4 plaster admixed with Integral Waterproofing Compound Aquaarm Proof WP 10@ 150 ml / bag of cement. (cement and sand shall be supplied by the main contractor) |
| 18 | od247877/2022_2023 : Providing and laying in position brick jelly cement concrete (1 cement: 4 M Sand and 8 brick jelly) using approved broken brick jelly 25mm and down gauge laid in toilet filling. |
| 19 | od247878/2022_2023 : Supply and fixing of Main Door Sensor Lock (Yale Brand) The rate shall be inclusive of cost of materials, labour charges etc., all complete. All the materials to be used on the work shall be got approved by The Engineer-in-charge. |
| 20 | 15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 21 | od248635/2022_2023 : Supplying and fixing approved make mirror of size required sizes with necessary fixing screws etc complete |
| 22 | od248636/2022_2023 : Supplying and fixing approved make stainless steel paper dispenser with necessary fixing materials etc. Basic cost = 6150 Jaquar Make – PTD-SAPDT0106CS |
| 23 | od248637/2022_2023 : Supplying and fixing approved make C.P. Soap dish with necessary fixing materials Jaquar Make |
| 24 | od248638/2022_2023 : Supplying and fixing approved make C.P. towel rail with necessary fixing materialsJaquar Make - ACN-1111SM |
| 25 | od248639/2022_2023 : Supplying and fixing approved make C.P. towel ring with necessary fixing materials Basic cost = 480, Jaquar Make - ACN - 1121BN |
| 26 | od248640/2022_2023 : Supplying and fixing approved make C.P. Robe hook with C.P. screws etc., complete. Fixed on the toilet door Basic cost = 480, Jaquar Make - ACN1161N |
| 27 | od248641/2022_2023 : Supplying & fixing of approved make 15mm CP two way bib cock with necessary CP wall flanges etc., complete. Basic cost = 2050, Jaquar Make - FUS29041 |
| 28 | od248642/2022_2023 : Supplying, Installing, testing and commissioning approved make 15mm CP shower unit comprising of CP 15mm dia single lever divertor with CP spout, overhead shower set comprising of CP shower arm, rose etc.,complete with CP wall flanges. Jaquar |
| 29 | od248643/2022_2023 : Supplying, fixing, testing and commissioning approved make wash basin white colour fixed below counter with 32mm dia CP waste coupling, 32mm dia C.P.bottle trap with C.P. extension pipe, 1 No. 15mm dia C.P. angle cock 1 No. C.P. flexible inlet connection pipe G.I. expansion bolts etc., complete including silicon sealant Basic cost of wash basin = 2400 & Pillar Cock = 1750, Referred Model Jaquar Make wash basin - CNS-WHT-705 , Jaquar Make Pillar cock - FUS29001 |
| 30 | od248644/2022_2023 : Supplying, fixing, testing and commissioning of approved make white colour European water closet wall mounted with concealed tank The quoted price shall also include installation of brackets, plastic solid seat cover with rubber buffers and flap, Heavy<br>duty plastic hinges etc., complete. Basic cost of closet = 12000 & concealed cistern with flush plate = 5900, Referred Model Jaquar make Closet - VGSWHT-81953UF, Jaquar Make Concealed Cistern - JCS-WHT-2400WP, Flush Plate - JCP-CHR-292415 |
| 31 | 17.28.1.1 : Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.Semi rigid pipe32 mm dia |
| 32 | 17.34.2 : Providing and fixing toilet paper holder:Vitreous china |
| 33 | 18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes |
| 34 | 18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes |
| 35 | 18.16.2 : Providing and fixing brass stop cock of approved quality :20 mm nominal bore |
| 36 | 18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore |
| 37 | 18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore |
| 38 | 50.18.8.5.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2 |
| 39 | 50.18.8.7.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2 |
| 40 | 50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2 |
| 41 | 50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 |
| 42 | od251616/2022_2023 : Supplying, fixing and testing PVC Multi floor trap (heavy duty hinged type) with brass CP frame & cover (150 mm x 150 mm square / 125 mm round). Trap of 100 mm dia. Inlet and 75 mm dia outlet fixed on a bed of cement concrete etc., complete. (The frame and grating shall be approved by Architects) |
| 43 | od252955/2022_2023 : Dismantling venial flooring including plywood , but including stacking with in 50<br>metres lead: of any Thickness including leading 50 m and stacking the same as directed by the departmental<br>office at site<br>Details of cost for 10 sqm |
| 44 | INTERIOR WORKS |
| 45 | od251603/2022_2023 : Wardrobe-Providing and fixing full height wooden self unit with shutter of 25 mm thick BWR ply with laminate finish of size 2100 mm high and 600 mm deep to detail comprising , 19 mm thick BWR ply for top, sides, 4 intermediates and bottom at 75mm level. Storage back 19mm thick BWR ply finished with 1mm thick laminate and 4 horizontal grooves in shutters front of 6 mm x 6 mm also with half<br>round nosing laminated edge finish of required leaves with necessary, TW lipping, box type hinges, tower bolts, locking<br>arrangements, ball catch, 150mm long SS Brush Finish handle etc., completeAll concealed faces of BWR ply finished with one coat of wood preservative paint and exposed faces of Steam beach beading polished to the satisfaction of the Architects. The inner side of the storage finished with 1mm thick Laminate |
| 46 | od251604/2022_2023 : One set of drawers using 18 mm commercial ply at bottom, top, sides and rear. 12 mm thick Commercial ply finished with 1 mm thick laminate at front side with necessary teak wood lipping telescopic drawer slides, locking arrangements, 100 mm long brush finish SS handles etc. complete size - 700X320X250mm |
| 47 | od251605/2022_2023 : Providing and fixing ply box false ceiling with 12mm thick Ply finished with 1mm thick laminate of approve colour and shade. The frame work comprising of 18mm com.ply at 450mm centre to centre both ways and the grid to be suspended by 8 gauge GI wire from roof slab by anchor fasteners to the slab and level adjuster clip GI wire.<br> |
| 48 | 12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 |
| 49 | od253461/2022_2023 : Providing and fixing Ply Boxing to detail, 18mm thick ply stiffner on horizontal and verticals at 600mm c/c on both ways fixed to wall with necessary screws, aluminium cleats, rawl plugs, etc., complete. 18mm com.ply finished with 1mm laminate of approved colour and shade with necessary grooves and beading. Mode of Measurement will be considered for front surface only. |
| 50 | od253463/2022_2023 : Providing and fixing laminate panelling on wall. Framing shall consist of size 50 x 25 x 2mm thick (0.791 kg/m) Aluminium box Section at 600mm c/c. both ways horizontally and vertically on the wall. The frame work should be covered by 8mm thick com. ply and finished with 1mm thick laminate of approved colour and shade. All concealed faces of comply painted with one coat of wood preservative paint before fixing. |
| 51 | od253464/2022_2023 : Study table with drawer & chair-Providing and fixing study table of 1200 x 600x750mm high with drawer unit to detail as per drw . Comprising table top out of 18mm commercial ply with stiffner of same commercial ply 100mm wide below the table and 10 x 37mm. Second class teak wood beadings finished with two coats of duco paint to shape along edges. Table top finished with 1mm thick laminate of approved colour and shade. On front and side of drawer finished with 1mm thick laminate and additional 18mm com. ply is fixed on front side to pattern with necessary grooves and finished with 1mm thick laminate of approved colour and shade Foot rest cum Mini bridge stand of required length with same 18 mm com. Ply finished with 0.8mm thick laminate Keyboard tray made out of 18 mm com.ply finished with 1mm thick laminate of approved colour and shade. 50mm Dia SS wire manager of approved quality . Supply & fixing study table chairs as per the Architect approved model. All concealed faces of comply finished with one coat of wood preservative paint and exposed faces of Second class teak wood beadings finished with two coats of duco paint to the satisfaction of the Client/ Architect. Table, inside should be finished with 0.8 mm thick laminate of approved colour and shade |
| 52 | od253465/2022_2023 : Centre Table - Providing and fixing centre table to detailed drawing of overall size 750x500 and 450mm height made out of 4 nos of 'L' shape 50 x 25mm steam beech wood leg and top interconnected with 25 x 25mm steam beech wood & finished with melamine polish.Top finished with 12mm thick clear float glass with Bevelled edges with necessary fixing arrangements.<br> |
| 53 | od253466/2022_2023 : Supply and installation of single seater pull out sofa of approved size made of matte finish rubber wood legs and framework of<br>maranti hardwood, upholstered with approved colour of leatherette semi PU 1mm thick with backing seat of 6" premium density foam of 28kg/m3 cushion and back cushion of hollow siliconized conjugated fibre polyster of 15 density |
| 54 | od253467/2022_2023 : Luggage rack-Providing and fixing low level Medium Height Lugage rack to detail of drawing about 450mm wide and 750 / 1200mm high comprising 18 mm thick com ply fixed at top, sides and bottom at 75mm and one intermediate with necessary SS bracket and rear side Side hung shutters in 2 leaves with 18 mm thick comply and on top finished with 1mm thick laminate of approved colour and shade, including necessary grooves,Box type hinges, locking arrangements, 100mm long C Shape SS brush finish handles, Tower bolt , Ball catch etc. complete. finished with 8mm thk com ply finished with 1mm thick laminate of approved colour and shade. Storage top 10 x 37mm. MDF beadings finished with two coats of duco paint to shape along edges.Side hung shutters in 2 leaves with 18 mm thick comply and on top finished with 1mm thick laminate of approved colour and shade, including necessary grooves,Box type hinges, locking arrangements, 100mm long C Shape SS brush finish handles, Tower bolt , Ball catch etc. Complete. Exposed faces of comply at top and sides of unit, finished with 1mm laminate of approved colour and shade. All concealed faces of comply finished with one coat of wood preservative paint and exposed faces of MDF beadings finished with two coats of duco paint to the satisfaction of the Client/ Architect. Table, Drawer, storage and cupboard inside should be finished with 0.8mm thick laminate of approved colour and shade. |
| 55 | od254000/2022_2023 : Providing and fixing King Size Cot & matress (1.93m x 2.03m) |
| 56 | od254001/2022_2023 : Providing and fixing of approved make of Curtains Approved design and shade. Basic cost of blinds should not be less than Rs.1400 per Sqm |
| 57 | od254002/2022_2023 : One set of drawers using 18 mm commercial ply at bottom, top, sides and rear. 12 mm thick Commercial ply finished with 1 mm thick laminate at front side with necessary teak wood lipping telescopic drawer slides, locking arrangements, 100 mm long brush finish SS handles etc. complete size - 450X450X450mm |
| 58 | 13.99.1 : Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :One or more coats on old work |
| 59 | 13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 60 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 61 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 62 | Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )Step Fan regulator - type 2 M |
| 63 | Installation, testing and commissioning of modular chime on existing MS box and modular plate including giving connection etc complete |
| 64 | Supply of modular type electronic chime (bell ding dong) working on 230V AC supply |
| 65 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm |
| 66 | Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductorcables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 3 Run |
| 67 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm |
| 68 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm |
| 69 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copperconductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair |
| 70 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PEinsulated,shielded with fine tinned copper braid and protected with PVC sheath in the existingsurface/recessed steel/ PVC conduit as required |
| 71 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20mm |
| 72 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25mm |
| 73 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.5/6 amps switch |
| 74 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.2 way 5/6 amps switch |
| 75 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.15/16 amp switch |
| 76 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet |
| 77 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 78 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.Telephone socket outlet |
| 79 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.TV antenna socket outlet |
| 80 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.Bell push |
| 81 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required |
| 82 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) |
| 83 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modularswitches in recess etc as required.3 Module (100mmX75mm) |
| 84 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm) |
| 85 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) |
| 86 | Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable |
| 87 | Conveyance and fixing charges of recess mounting down light fittings of all types complete with all accessories in the existing opening of false ceiling, giving connections with the existing wire etc., as required. |
| 88 | Conveyance, installation, testing and commissioning of ornamental wall light fittings of all types directly on wall including giving connections with required length of 16/0.20mm 3 core round copper conductorflex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required. |
| 89 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.as required |
| 90 | Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep |
| 91 | Supply and providing modular type skirting light of good quality in the existing MS box and givingconnection etc complete as required at site |
| 92 | Supply & providing of 4.8W/m LED strip light of IP20 grade including suitable driver for use on 230V AC supply including all accessories required for fixing etc. complete of good quality and approved make in the existing coves including twin twisted plastic wire for lead interconnection etc complete. |
| 93 | Supply,of Wall mounted light fitting with 9W or 10W LED lamps and sutable drivers for Mirror light fitting |
| 94 | Supply of pvc low noise 300mm dia1400 RPM single phase Exhaust fan of good quality and reputed make |
| 95 | Supply, Installation, testing and commissioning of 1200mm sweep BLDC Ceiling fan and fixing the same with extended rod from roof, required clamps,bolts,fan hook , screws ,hardwares as required as per the site condition including remote controller |
| 96 | Supply of SPOT LIGHT 12W-CDR211-09-30-SL-NWH |
| 97 | Supply of Orient Electric 10W LED Inverter Emergency Batten (White, Square |
| 98 | Supply of RECESSED LED downlighter system wattage not more than 12W SQUARE RECESS and luminaire lumens not less than 1200 lumens. The system efficacy shall be > 100 lm/W, cut out dia shall not greater than 85mm. The housing shall be die-cast aluminium with deep recessed optics with low glare and reflecter shall be matt black in color. Luminaire shall be compatible to access/replace the LED moudle without removing the trim from the ceilng. LED make: thatsatisfies IEC62471 Photobiological/RoHS Standards with and LED Efficacy of > 130lm/W, Colour Temperature-4000K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI > 90, Life of LED as per L70 > 50000burning hours, Ambient temp-0 to 50DegC,Driver efficiency>85%, THD<10%, Power factor>0.95, Inbuilt Surge protection in CM 2.5KV, LED Driver with Voltage range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard, Electrical Safety with Class 1 Insulation. Luminaire shall be BIS compliance.Driver shall be compatible for auto cut off and restart with deviation to operating voltage also the ripple shall be less 5% |
| 99 | Supply of RECESSED LED downlighter system wattage not more than 18W CIRCULAR RECESS and luminaire lumens not less than 1800 lumens. The system efficacy shall be > 100 lm/W, cut out dia shall not greater than 85mm. The housing shall be die-cast aluminium with deep recessed optics with low glare and reflecter shall be matt black in color. Luminaire shall be compatible toaccess/replace the LED moudle without removing the trim from the ceilng. LED make: that satisfies IEC62471 Photobiological/RoHS Standards with and LED Efficacy of > 130lm/W, ColourTemperature-4000K or Higher with LED binning as per ANSI Bin C78.377A, 120Deg LED Beam Angle, CRI > 90, Life of LED as per L70 > 50000burning hours, Ambient temp-0 to 50DegC, Driver efficiency>85%, THD<10%, Power factor>0.95, Inbuilt Surge protection in CM 2.5KV, LED Driver with Voltage range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard, Electrical Safety with Class 1 Insulation. Luminaire shall be BIS compliance.Driver shall be compatible for auto cut off and restart with deviation to operating voltage also the ripple shall be less 5% CAT REF.NO :WIPRO LD90- 231-XXX-65-XX OR EQL |
| 100 | Supply of 43” or nearest higher size 4K Ultra HD Smart LED Television sets with hospitality features having the following minimum specifications. Resolution – 3840 x 2160 Brightness – 250 nits USB port – 1 No.(minimum) HDMI/Optical Component connectivity Contrast Ratio – 4700:1 Viewing Angle (H/V) – 178/178 Response Time – 8 ms The LED TV set shall have Built-in Wifi, Bluetooth support, Built-in speaker, PC/DVD component connectivity, remote control and Wall Bracket etc complete. Warranty:- 3 years full warranty and shall be complete as per manufacturer\"s Specification. (Make-Samsung, LG, Panasonic or equivalent approved) |
| 101 | Supply of Push button telephone of good quality and approved make with 7 feet long connection cord having RJ11 male connector at both ends |
| 102 | Supply of cordless type 1.0 Litre or nearest higher capacity kettle for guest rooms having stainless steel body inside, concealed heating element,auto cut off & dry boil protection and working on 230V 50Hz AC supply. |
| 103 | Supply of 60 Litre or nearest higher capacity vapour compression type minifridge/minibar working on 240V 50HZ AC supply |
AI Tender Summary
Tender Timeline
Jan 06, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 25, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender