Supply Of Fittings Block Forged Of Moc Cs_As_Ss As Per Technical Specifications For Numaligarh Refinery Limited, Assam, India. , Group-1 Supply Of Forged Fittings , Moc : Ss / Ss Dual, For Nrep Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 45 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 45 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Fcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Fcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Fcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 45 Deg Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl Ss, 3000,0, B16.11, Sw End, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl Ss, 3000,0, B16.11, Sw End, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Group-2 Supply Of Forged Fittings , Moc : Ss / Ss Dual (H2 Service / Nace), For Nrep Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg Ss Dual (Nace), 3000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03%, For Sour(Nace) Service Req. Acc. To, Nace Mr0103 , Elb 90 Deg Ss Dual (Nace), 3000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03%, For Sour(Nace) Service Req. Acc. To, Nace Mr0103 , Tee Ss Dual (Nace), 3000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03%, For Sour(Nace) Service Req. Acc. To, Nace Mr0103 , Fcpl Ss Dual (Nace), 3000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03%, For Sour(Nace) Service Req. Acc. To, Nace Mr0103 , Hcpl Ss Dual (Nace), 3000,0, B16.11, Sw End, Forged, Servicenace, Category 1, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03%, For Sour(Nace) Service Req. Acc. To, Nace Mr0103 , Hcpl Ss Dual (Nace), 3000,0, B16.11, Sw End, Forged, Servicenace, Category 1, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03%, For Sour(Nace) Service Req. Acc. To, Nace Mr0103 , Elb 90 Deg Ss Dual (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual (H2 Ser.), 9000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 45 Deg Ss Dual (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 45 Deg Ss Dual (H2 Ser.), 9000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 45 Deg Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl Ss (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl Ss (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl Ss (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Group-3 Supply Of Forged Fittings , Moc : Cs / Ltcs, For Nrep Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Ltcs, 9000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Ltcs, 6000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 9000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 3000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 3000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 3000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 3000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 3000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Group-4 Supply Of Forged Fittings (Nipples), Moc : Cs / As, For Nrep Project Including Tpi Charges As Specified In Material Requisition. , Nipple As, B36.10M, Mnpt X Bw End,Sch 160, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P5, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F5 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As, B36.10M, Mnpt X Bw End,Sch 160, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P5, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F5 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As, B36.10M, Mnpt X Bw End,Sch 160, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P9, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F9 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As, B36.10M, Mnpt X Bw End,Sch 160, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P9, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F9 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As, B36.10M, Mnpt X Bw End,Sch Xxs, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P9, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F9 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple Cs, B36.10M, Mnpt X Pe,Sch Xxs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Cs, B36.10M, Mnpt X Pe,Sch Xxs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Group-5 Supply Of Forged Fittings, Moc : Cs (Ibr), For Nrep Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 90 Deg Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 90 Deg Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 90 Deg Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 45 Deg Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 45 Deg Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Fcpl Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Fcpl Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Fcpl Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Fcpl Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Rcpl Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Rcpl Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Tee Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Tee Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Tee Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Tee Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Tee Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Tee Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Group-6 Supply Of Forged Fittings, Moc : As (Ibr), For Nrep Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Elb 90 Deg As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Elb 90 Deg As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Elb 45 Deg As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Fcpl As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Fcpl As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Tee As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Tee As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Hcpl As (Ibr), 6000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Hcpl As (Ibr), 6000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Hcpl As (Ibr), 6000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Hcpl As (Ibr), 6000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Hcpl As (Ibr), 6000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Hcpl As (Ibr), 6000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Hcpl As (Ibr), 6000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Group-7 Supply Of Forged Fittings, Moc : Cs (Galv.), For Nrep Project Including Tpi Charges As Specified In Material Requisition. , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 6000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 6000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 6000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Unioncs (Galv.), 6000,0, Mss Sp-83, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Unioncs (Galv.), 6000,0, Mss Sp-83, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Unioncs (Galv.), 6000,0, Mss Sp-83, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Group-8 Supply Of Forged Fittings, Moc : Cs (Ext Coated), For Nrep Project Including Tpi Charges As Specified In Material Requisition. , Hcpl Cs Ext. Coated, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Hcpl Cs (Galv.)&Ext. Coated, 3000,0, B16.11, Threaded End,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Elb 45 Deg Cs (Galv)&Ext. Coat, 3000,0, B16.11, Threaded Ends,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Fcpl Cs (Galv.)&Ext. Coated, 3000,0, B16.11, Threaded Ends,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Group-9 Supply Of Forged Fittings, Moc : Cs (H2 Service / Nace), For Nrep Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Nace+H2), 6000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Elb 90 Deg Cs (Nace+H2), 6000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Elb 90 Deg Cs (Nace+H2), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Tee Cs (Nace+H2), 6000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Hcpl Cs (Nace+H2), 9000,0, B16.11, Sw End, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Hcpl Cs (Nace+H2), 9000,0, B16.11, Sw End, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Hcpl Cs (Nace+H2), 9000,0, B16.11, Sw End, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Hcpl Cs (Nace+H2), 9000,0, B16.11, Sw End, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Hcpl Cs (Nace+H2), 9000,0, B16.11, Sw End, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Group-10 Supply Of Forged Fittings, Moc : As (H2 Service / Nace), For Nrep Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg As (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg As (H2 Ser.), 9000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 45 Deg As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 45 Deg As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 45 Deg As (H2 Ser.), 9000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl As (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl As (H2 Ser.), 9000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Rcpl As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Rcpl As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Rcpl As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee As (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee As (H2 Ser.), 9000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl As (H2 Ser.), 3000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl As (H2 Ser.), 3000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl As (H2 Ser.), 3000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl As (H2 Ser.), 3000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 => Limited
