Housing Urban and Rular Development Government Departments Closing in 0 days TDR #35606898

Tender For Providing Fire Fighting System In Pwd Rest House At Naraingarh In Ambala Distt.

Issued by Government Departments · naraingarh, Haryana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Jan 2023
0 days left
EMD
13.94 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
naraingarh → Haryana
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Providing Fire Fighting System In Pwd Rest House At Naraingarh In Ambala Distt.

BOQ

Name of Work: Tender for providing fire fightingsystem in PWD Rest Houseat Naraingarh in Ambala Distt.
Sl. No. Item Description
1[10.100.1]Cement Concrete 1:8:16 Flooring 1. Cement Concrete 1:8:16 with Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size in foundation and plinth.
2[10.100.2]Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth.
3[10.63.2]Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm
4[10.67.2]Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 2. Size of Tile 600x600 mm
5[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)
6[2.EL270] EL270. M.S. Pipe 100mm dia,
7[2.EL281] EL281. 100mm dia,
8[2.EL282] EL282. 80mm dia,
9[2.EL297] EL297. 100 mm dia
10[22.103.3]Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 3. 25 mm nominal bore
11[22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
12[23.6.6.2]MS CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of MS conduit pipe 1.6 mm thick , ISI marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS pipe of 25 mm dia.
13[24.2.2.2]LT CABLE 2.2. Laying of underground cable 0.75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:- 16 Sq mm to 35 sqmm 2 to 4 Core
14[24.2.9.1]LT CABLE 9.1. Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardener, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. - Straight through Joint. For 1.5 to 6 sqmm Cable 2 Core
15[5.22]Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge.
16[5.42]Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge.
17[6.16]Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size).
18[7.22.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 1. Cement mortar 1:4 (1 cement : 4 coarse sand)
19Exist signage electrical (Life guard)
20Hooter (life Guard)
21MCP / TBS Life Guard
22Providing, fixing, testing and commissioning of 100 mm dia burden type, stainless steel dia type pressure gauge ( n pump room) including barss isolation valve and pipe having caliberation of 0-15 kg/cm2.
23S.S 63 mm dia short branch pipe with 16 mm dia. Nominal bore outlet with standard instantaneous tyep 63 mm dia coupling in all respects ISI marked (IS:903)
24SITC of ABC type fire extinguisher ISI mark IS code 15683-2006 capacity : 09 kgs 90% Map (Mono Amonium Phosphate) pressurized with dry nitrogen Make (Fire Cut, Cease fire, Mini Max, Safex, Kanax/omax/life guard/cnp/padmini etc.
25SITC of Co2 type fire extinguisher ISI mark IS code 15683-2006 (Capacity : 4.5 kg with 1 mtr long hosepipe make (fire cut, cease fire, mini max, safex, kanax) / omax/life guard /cnp/padmini etc.
26SITC of pressure switches for Main, Jockey pumpand standby Diesel pumps, including necessary wiring upto control panel and Ball valve.
27Smoke Detector conventional type electric shaft (Life Guard)
28Smoke main panel four zone life guard
29Smoke Sub Panel twon zone life guard
30SITC of mild steel pipe (IS:1239 Part-I) C class heavy class
31SITC OF Air vessel 200MM dia x150mm height with dish top made in 6mm thick ms pipe complete with 20mm dia brass air valve , 200mm dia stop valve , pressure gauge ,stop cock, nipple
32SITC of C gunmetal 2 way fire bridge connection with 150 mm butterfly valve 150 mm non return valve and i/c 18 SWG painted M.S Box 30x20x10 with MS framed front with glass panel and wors `Fire Bridge INLT` painted in bold letter written on it in red colour as required.
33SITC of First-aid fire hose reel IN RED COLOUR DRUM, wall mounting swinging type complete with drum, bracket, 25mm dia stop valve and 20 mm dia. x 30 m long high pressure hose reel tubing as per IS: 1532 with gun-metal/S.S shut-off Nozzle having 5mm dia. OUTLET. the hose reel shall strictly confirm to IS: 884 : 1969.
34SITC of Non-percolating hosepipe (RRL type - 1) ISI marked (is:636) 63 mm dia. x 15 m long complete with instantaneous type , /S.S 63 mm dia. ISI marked male and female couplings (IS:903-1985) bound and riveted to hose pipe with copper rivets and 1.5 mm dia. copper wire.
35SITC of Single headed, S.S ISI marked oblique pattern hydrant landing valve/Yard or internal Hydrant valve with 80 mm dia. flanged inlet and 63 mm dia. instantaneous type female outlet complete with cap. and G.I. chain, twist release type lug and all accessories as per is:5290-1983
36Electric shaft fire door (Gallexy fire door)

AI Tender Summary

OUR REF NO 35606898
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 12-01-2023
Authority
Authority Name Public Works Department
Work Description Tender For Providing Fire Fighting System In Pwd Rest House At Naraingarh In Ambala Distt.
Basic Detail
Tender No 202389A40FC2 7C77 4BE3 B308 C254E3CF3BDE617BAR
Bidding Type Tender
Location
City naraingarh
State Haryana
Key Dates
Publish Date 05 Jan 2023
Submission Date 12 Jan 2023
Open Date 13 Jan 2023
Finance
Tender Value Ref. Documents
Tender Fee 1000
EMD 13.94 Lakhs
Exemption Not Available
Document List
3f612a37-ae44-4c06-962f-53cf0628293f.html
BOQ_325118.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 05, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 12, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 13, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

3f612a37-ae44-4c06-962f-53cf0628293f.html

xls

BOQ_325118.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders