Tender For Purchase Of Bee Hives Components Equipments And Supply Of Items Required For Bee Colonies Equipments Under Eco Development Scheme Under Mitigation Plan Of Kishtwar High Altitude National Park, dachhan-Jammu And Kashmir

Purchase Of Bee Hives Components Equipments And Supply Of Items Required For Bee Colonies Equipments Under Eco Development Scheme Under Mitigation Plan Of Kishtwar High Altitude National Park- 1 Bee-Hives: Items Bee-Hives Langstroth Type Double Brood With 10 Frames Each Made Of Seasoned Kail Wood Free From Knot Cracks / Safeda Wood ( Seasoned ) Pine Wood ( Imported ) .A ) Bottom Board: 22”X16 ¼”X 7 / 8” With Wooden Rod Of 22”X 7 / 8” X 7 / 8” Size & 14 And 14 ½” X 7 / 8” Wooden Rod Of Back, Along With An Entrance Sheet 3 X 3 / 8:, The Bottom Board Either Should Be A Single Piece Or Wooden Piece Or Wooden Piece Or Joining Two Wooden Boards Lengthwise Bottom Should Convertible Type So That It Can Be Put To Use From Both Sides. B ) Brood Chamber / Deep Upper Walls 7 / 8” Thick. Outer Dimension 20”X 16 ¼”, Inner Dimension 18” ¼” X 14 ½”, Height 9 ½”, Nail Tin Rabet 5 / 8” Deep & ½” Wide Along Top Side.C ) Body Frame: Top Bar = 19”X 1” X7 / 8” With Groove In The Middle On The Lower Side.D ) Side Bar: 9” 1 / 8” X 3 / 8” Upper Side 1 3 / 8” Wide And Lower Side 1” Wide Cut From The Middle Portion On Either Endto Accommodate The Top And Bottom Bars Provided With Holes.E ) Bottom Bar:17 5 / 8” Long, ¼”Wide & 3 / 8” Thickf ) Super: As Per Specification Of Brood Chamberg ) Super Frame: As Per Specification Of Brood Chamber Frameh ) Inner Cover: 20”X18” X 3 / 8” With 3 / 8” X 7 / 8” Wooden Bar On All Sides.I ) Outer Cover / Flap Top Cover: 3 / 8’’ Thick Board Nailed To Rectangular. 2 Shifting Cover: Size 20’’ X 161 / 4” X 3 / 8” The Frame Should Be Made Of Good Quality Seasoned Kail Wood. Power Loom Wire Matting Jalli Should Be Fixed Tightly In Between The Wooden Frame 3 Outer Cover: Size 23” X 18” X 3 / 8” Should Be Made Of Good Quality Seasoned Kail Wood. A Rectangular Frame 2” Should Be Nailed On All The Four Sides. Gi / Aluminium Sheet Of 28 Gauges Should Also Be Nailed On The Top Of The Outer Cover 4 Inner Cover: Size 20”X18” X 3 / 8”, It Should Be Made Of Good Quality Seasoned Kail Wood. Wooden Bar 3 / 8’’X7 / 8’’ Should Be Nailed On All Four Sides 5 Bottom Board: Size 22’’X16 ¼ ‘’X7 / 8’’ Made Of Good Quality Seasoned Kail Wood. It Should Be Either A Single Piece Of Wood Or Two Joining Wooden Boards Lengthwise, Along Each End Of The Longer Side, A Wooden Rod 20’’X7 / 8’’ Be Nailed And Another Wooden Rod 14 ¼’’X7 / 8’’ Be Nailed At The Back. The Front Be Provided With Entrance Rod Of Size ½’’X 7 / 8’’ With A Sheet 3’’X3 / 8’’ In The Middle Bottom Board Should Be Convertible Type So That It Can Be Put To Use From Both Sides. 6 Body Frame: The Frames Should Be Made Of Good Quality Seasoned Kail Wood With Top Bar 19’’X1’’X7 / 8’’ Sides Bar 91 / 2’’X13 / 8’’X 3 / 8’’. There Should Be Four Holes On Each Side For Wiring The Frames 7 C.F. Sheets ( Apis Mellifera ) Computerised: The Sheet Should Be Made Of Pure Bee Wax ( As Per Bis Standard ) . The Size Of The Sheet Should Be 42X19 Cms. Having 19.3 Cells In 4 Linear Inches. The Weight Of Each Sheet Should Be 62.5 Gms I.E., The Number Of Sheets Per Kilograms Should Be 14-16. 8 Bee Veils: The Bee Veils Should Be Made Of Good Quality Terrycot Cloth Of Khakhi / Green Colour With Cloth Mating Jalli 9” Of White Colour In Front With No Hindrances In Vision. The Length Of The Cap Of Veil Should Be 5 ¼” Long & Lower Portion Of The Veil Should Be 14” Long. There Should Be Two Rings Of Dia 12” Reinforcing Uniformly Which Could Hold Veil Away From The Face & Well Ventilated Designed Allowing Easy Body Movement 9 Bee Gloves: The Gloves Should Be Made Of Good Quality Terrycot Cloth With White / Khakhi Coloured Elbow & They Should Cover The Fore Arms. The Length Of Gloves Should Not Be Less Than 15 Inches 10 Hive Tools ( Food Grade Stainless Steel ) : The Toll Should Be Made Of Flat Iron About 20 Cms Long, 3 Cms Wide & 0.3 Cms Thick. It Should Be Somewhat Sharp On One End & 5 Cms Apart At The Both End And Is Bent At An Angle Of 80 Degree. There Should Be One Small Hole Of Size 6Mm In Dia At The Elongated Side Of The Tool Bent 11 Un-Capping Knife ( Food Grade Stainless Steel ) : It Should Be A Double Jacket Knife Made Of Soft Iron Having Thickness 1Mm. It Should Have Sharp Blade Not Less Than 27 ½ Cms In Length & 6.3 Cms. In Width, Pointed At One End And With Wooden Handle At The Other End. The Knife Should Have Galvanized Nozzle On The Upper Surface Of The Blade Having Length 18 Cms & Width 4Cms With A Provision For Outlet And Inlet Of Steam 12 Honey Extractor: 3 Frames ( Manual ) Made Of Stainless Steel – Height 24 Inch & Dia 18.5 Inch. 13 Pollen Trap: Plastic Made- ( 1 ) 35X14x10 Cm 14 Queen Excluder: Plastic Made- ( 1 ) 49X46x26 Cm 15 Plastic Feeder: Length 17” ( One Side ) With1’ Hook On Both Ends, 16.5” ( Other Side ) Depth 4” & Height 4.5” 16 Honey Strainer: Stainless Steel-Funnel Type Height 27 Cm & Dia 19 Cm 17 Bee Brush: Wooden Handle Height Of Wooden Handle 15 Cm & Frail Height 7.5 Cm 18 Wax Melter: Height 24 Inch, Dia 12X12 Inch 19 Queen Catcher: 6.6 Cm X 5.1 Cm X 4.8 Cm 20 Bee Smoker: Stainless Steel – Height 7 Inch & Dia 4.3 Inch 21 Extraction Net: Nylon Made, Size: 12’X12’ & 12’X15’ 22 Swarm Catcher: Standard Size Made Of Good Quality Terrycot Cloth With Cloth Matting, Jalli White Colour 23 Bee Colony ( Apis Mellifera ) A ) Should Have 8 Frames Bee Strengthb ) Should Have Brood At Least On 4 Framesc ) Should Have Sufficient Stores Of Nectar And Pollend ) Should Be Absolutely Free From Any Disease And Disorder 24 Bee Colony ( Apis Mellifera ) A ) Should Have 4 Frames Bee Strengthb ) Should Have Brood At Least On 2 Framesc ) Should Have Sufficient Stores Of Nectar And Pollend ) Should Be Absolutely Free From Any Disease And Disorder 25 Stainless Steel Container 20 Kgs Capacity With Lid ( For Honey Storage Of Bis Standard ) 26 Stainless Steel Container 30 Kgs Capacity With Lid ( For Honey Storage Of Bis Standard )

INR 1000 /-

INR 50000.0 /-

Refer document

Name of Work: Purchase of Bee-Hives, Components & Equipments and Supply of items requiredfor Bee Colonies/Equipments under Eco-development Scheme under Mitigation plan of Kishtwar High Altitude National Park.

Sl. No.	Item Description
1	Bee-Hives: Items Bee-hives langstroth type double brood with 10 frames each made of seasoned kail wood free from knot cracks / safeda wood (seasoned) pine wood (imported). a) Bottom Board: 22”x16 ¼”x 7/8” with wooden rod of 22”x 7/8” x 7/8” size & 14 and 14 ½” x 7/8” wooden rod of back, along with an entrance sheet 3 x 3/8:, The bottom board either should be a single piece or wooden piece or wooden piece or joining two wooden boards lengthwise Bottom should convertible type so that it can be put to use from both sides. b) Brood Chamber / Deep Upper Walls 7/8” thick. Outer dimension 20”x 16 ¼”, inner dimension 18” ¼” x 14 ½”, height 9 ½”, Nail tin Rabet 5/8” deep & ½” wide along top side. c) Body Frame: Top bar = 19”x 1” x7/8” with groove in the middle on the lower side. d) Side Bar: 9” 1/8” x 3/8” upper side 1 3/8” wide and lower side 1” wide cut from the middle portion on either endto accommodate the top and bottom bars provided with holes. e) Bottom Bar:17 5/8” long, ¼”wide & 3/8” thick f) Super: As per specification of Brood Chamber g) Super Frame: As per specification of Brood Chamber frame h) Inner Cover: 20”x18” x 3/8” with 3/8” x 7/8” wooden bar on all sides. i) Outer Cover / Flap Top Cover: 3/8’’ thick board nailed to rectangular.
2	Shifting Cover: size 20’’ x 161/4” x 3/8” the frame should be made of good quality seasoned kail wood. Power loom wire matting jalli should be fixed tightly in between the wooden frame
3	Outer Cover: Size 23” x 18” x 3/8” should be made of good quality seasoned Kail Wood. A rectangular frame 2” should be nailed on all the four sides. GI / Aluminium sheet of 28 gauges should also be nailed on the top of the outer cover
4	Inner Cover: Size 20”x18” x 3/8”, it should be made of good quality seasoned Kail Wood. Wooden bar 3/8’’x7/8’’ should be nailed on all four sides
5	Bottom Board: Size 22’’x16 ¼ ‘’x7/8’’ made of good quality seasoned Kail Wood. It should be either a single piece of wood or two joining wooden boards lengthwise, Along each end of the longer side, a wooden rod 20’’x7/8’’ be nailed and another wooden rod 14 ¼’’x7/8’’ be nailed at the back. The front be provided with entrance rod of size ½’’x 7/8’’ with a sheet 3’’x3/8’’ in the middle bottom board should be convertible type so that it can be put to use from both sides.
6	Body Frame: The frames should be made of good quality seasoned Kail Wood with top bar 19’’x1’’x7/8’’ sides bar 91/2’’x13/8’’x 3/8’’. There should be four holes on each side for wiring the frames
7	C.F. Sheets (Apis mellifera) computerised: The sheet should be made of pure BEE Wax (As per BIS standard). The size of the sheet should be 42x19 Cms. Having 19.3 cells in 4 linear inches. The weight of each sheet should be 62.5 gms i.e., the number of sheets per kilograms should be 14-16.
8	Bee Veils: The Bee Veils should be made of good quality Terrycot cloth of Khakhi / Green colour with cloth mating Jalli 9” of white colour in front with no hindrances in vision. The length of the cap of veil should be 5 ¼” long & lower portion of the veil should be 14” long. There should be two rings of dia 12” reinforcing uniformly which could hold veil away from the face & well ventilated designed allowing easy body movement
9	Bee Gloves: The gloves should be made of good quality Terrycot cloth with white / Khakhi coloured elbow & they should cover the fore arms. The length of gloves should not be less than 15 inches
10	Hive tools (Food Grade Stainless Steel): The toll should be made of flat iron about 20 Cms long, 3 Cms wide & 0.3 Cms thick. It should be somewhat sharp on one end & 5 Cms apart at the both end and is bent at an angle of 80 degree. There should be one small hole of size 6mm in dia at the elongated side of the tool bent
11	Un-capping knife (Food Grade Stainless Steel): It should be a double jacket knife made of soft iron having thickness 1mm. It should have sharp blade not less than 27 ½ Cms in length & 6.3 Cms. In width, pointed at one end and with wooden handle at the other end. The knife should have galvanized nozzle on the upper surface of the blade having length 18 Cms & width 4Cms with a provision for outlet and inlet of steam
12	Honey Extractor: 3 frames (Manual) made of stainless steel – height 24 inch & Dia 18.5 inch.
13	Pollen Trap: Plastic made-(1) 35x14x10 cm
14	Queen Excluder: Plastic made-(1) 49x46x26 cm
15	Plastic Feeder: Length 17” (one side) with1’ hook on both ends, 16.5” (other side) Depth 4” & Height 4.5”
16	Honey Strainer: Stainless Steel-funnel type height 27 cm & Dia 19 cm
17	Bee Brush: Wooden handle height of wooden handle 15 cm & frail height 7.5 cm
18	Wax Melter: Height 24 inch, Dia 12x12 inch
19	Queen Catcher: 6.6 cm x 5.1 cm x 4.8 cm
20	Bee Smoker: Stainless Steel – Height 7 inch & Dia 4.3 inch
21	Extraction Net: Nylon made, Size: 12’x12’ & 12’x15’
22	Swarm Catcher: Standard size made of good quality Terrycot cloth with cloth matting, Jalli white colour
23	Bee Colony (Apis mellifera) a) Should have 8 frames bee strength b) Should have brood at least on 4 frames c) Should have sufficient stores of nectar and pollen d) Should be absolutely free from any disease and disorder
24	Bee Colony (Apis mellifera) a) Should have 4 frames bee strength b) Should have brood at least on 2 frames c) Should have sufficient stores of nectar and pollen d) Should be absolutely free from any disease and disorder
25	Stainless steel container 20 kgs capacity with lid (For Honey storage of BIS Standard)
26	Stainless steel container 30 kgs capacity with lid (For Honey storage of BIS Standard)