|
| 1 | Part-A :- Civil Works |
| 2 | Excavation in trenches for foundations, pipes cables etc. in ordinary soil (Loam, Clay or Sand) including lift upto 1.5 m lead upto 50m and drassing of sides and ramming of bottom disposal of surplus excavated earth as directed by Engineer- in- charge with lead of 50 m. (0 to 1.5 m depth) (PWD SI No-251a) |
| 3 | Earthwork in Cutting or in embankment in ordinary soil excavation to be done in form of regular pits not exceeding 1/2 M in depth and work embankment to be in 20cm layers including ramming and dressing the surface to required level and slopes and also including 1.5 M lift and 30M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with 30m distance as directed by the Engineer incharge with 8Km cartage including.(PWD SI No. 253a+ 231(a)+261b) |
| 4 | First class Brick Work in 1:6 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work.SOR303(A) |
| 5 | First class Brick Work in 1:6 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work.SOR303(A) |
| 6 | Mild steel (Tor steel or plain) or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured up to floor two level. (DSR 5.22.1/2021) |
| 7 | RCC work with cement approved coarse sand and 2cm (3/4\")gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates)for liental,slab necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement and complete.SOR 283(a)/2022 |
| 8 | RCC work with cement approved coarse sand and 2cm (3/4\")gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates)for raft and footing necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement and complete.SOR 287(a)/2022 |
| 9 | RCC work with cement approved coarse sand and 2cm (3/4\")gauge approved stone ballast in the proportion 1:1½:3 (1 cement : 4½ aggregates)for cloumn ,tie beam ,slab necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement and complete.SOR 289/2022 |
| 10 | M-150 Brick Work in 1:4 (one cement & four coarse sand) mortar in superstructure including necessary cutting & moulding of bricks as required including supply of allmaterials,Labour,T&P etc.required for proper completion of the work.[SI.No.305a+309]2022 |
| 11 | M.S. or iron work in heavy sizes such as built up gates, door/windows frames etc. including cutting welding and wastage including supply of material, Labour T&P etc. required for proper completion of work. [S.I. No. 503] |
| 12 | 12 mm thick cement plaster with cement and coarse sand mortar in 1:4 over brickwork minimum thickness not to be less than 1 cm. including supply of all material, Labour T&P etc. required for proper completion of work. (PWD SI.No-584a) |
| 13 | Providing and laying vitrified floor tiles in sizes 600X600MM(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.NEW ITEM 14.21 |
| 14 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conformingto IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. (DSR 11.38/21) |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.DSR 8.31/2021 |
| 16 | Supply and fixing of hexagonal fan box with hexagonal side of approximate 80mm in length fabrication from 16 SWG M.S sheet in corporate 10mm sheet in corporate 10mm and M.S round bar dully bent for supporting fan hanger etc all complete. (PWD SI No 1149/elctrical) |
| 17 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixinghinges/ pivots and making provision for fixing of fittings wherever requiredincluding the cost of EPDM rubber / neoprene gasket required (Fittings shall bepaid for separately) Anodised aluminium (anodised transparent or dyed to required shade accordingto IS: 1868, Minimum anodic coating of grade AC 15 DSR 21.1.2.1/2021 |
| 18 | Providing and applying white cement based putty two coats of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. to prepare the surface even and smooth complete. (PWD S.I.No. Flooring New Item) |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1New work (Two or more coat applied @ 1.67 ltr/10 sqm overand including priming coat of exterior primer applied @ 2.20kg/ 10 sqm) 15.23 |
| 20 | (Distemper (OIL BOND) one coat using approved colouring materials of buff, grey or brown shade icluding supply of all materials labour & T&P Buusing approved colouring materials of pink,green or yellow shades -2coats (PWD S.I. 649+650) |
| 21 | Painting or Varnishingon iron works in small areas or new wood workwith one coat of ready mixpriming paint and two coat of approved superior quality ready mixed paint of clear synthetic varnish (Berger,dulux,,Narolac,Shalimar) including supply of all material Labour & T&P etc. required for proper complete of work paint to be used should confirm to the ISI no 1031950. (PWD SI.No-641+642) |
| 22 | P/L of Brick Cobaaverage 100 mm thick 1:4 cementand coarse sand mortar including supply of all materials,labours and T&P etc required for proper completion of the work includingwater proofing compound and recorn synthetic etcall complete as directed by E/I. (PWD S.I. No. Roof Work New Item) |
| 23 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 stone aggregate 10 mm and down gauge), including finishingwith cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase D.S.R No 12.21.1/ 2021 |
| 24 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (PWD S.I. No. Ch-21A-New Item) |
| 25 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a)First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours(b)Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm.This layer will be allowed to air cure for 4 hours followed with water curing for 48hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. DSR 22.5/21 |
| 26 | Supply and fixing of 30 mm thick commercial quality plywood flush door shutter conforming to IS 2202 part-1 (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges bolts nuts handles springs and other fitting with necessary screws etc all complete. (SOR 470(b) |
| 27 | Supply and fixing of 4 mm thick glass panes of ISI approved quality with equal or equivalentISI marks .brads and putty and springs for window and ventilator m.s section of wherever is required on other places including cartage of all items (PWD S.I. No. 806+ Diff cost of glass thickness) |
| 28 | 2cm thick plaster in dado or skirting in 1:2 consisting of one part of cement & two part of approved coarse sandlaid in panels finished with 3mm floating coat of neat cement or cement mixed with marbile dust in ratio 5:1 including supply of all material, labour, tools & plants etc.required for completion ofthe work.[SI.No.597] |
| 29 | 25 mm thick cement concrete flooring 1:2:4 without base concerete finished with floating coat of neat cement.including fixing of glass strips. (excluding cost of glass strips ). (PWD S.I.No. 601) |
| 30 | Supply and fixing of Kota stone in flooring 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 20 mm base coat (bedding) of 1:4 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.new item 14.22 |
| 31 | Supply and fixing 20 mm thick Kota stone tiles in riser of steps, skirting, dado & Pillars laid on 12mm (Avg) thick morter in with 1:3 cement and approved coarse sand morter & jointed with gray cement slurry mixed with pigment to match the shade of slab finished with rubbing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work.New item 14.20 |
| 32 | Part-B :- Water Supply and Sanitary Works |
| 33 | Supply and fixing of following dia ISI marked GI pipe (Parkash, Surya, Jindal) partly concealed in wall complete with GI specials such as bends T-sockets, Cross, clamps etc. earth work including filling the trenches etc & including cutting groving the wall all complete. |
| 34 | 40mm dia (DSR No. 18.12.5)/2021 RM |
| 35 | 25mm dia (DSR No. 18.12.3)/2021 RM |
| 36 | 15mm dia (DSR No. 18.12.1)/2021 RM |
| 37 | Providing and fixing following dia P.V.C pipe heavy quality 4kg/sqcmworking pressure including supply of all specials clamps with wall cutting etc and other material labour T&P ctc. required for proper completion of the work. |
| 38 | 110 mm dia |
| 39 | 160 mm dia |
| 40 | Door Band 160 mm |
| 41 | (i) Door Tee 110x110x110 |
| 42 | (iii) Door short Bend 110mm |
| 43 | (iv) Plane short Bend 110mm |
| 44 | P/F 100 mm dia PVC Nahani trap heavy quality ISI marked including supply of all materials, labour T&P ctc. Required for proper completion of the work. |
| 45 | Providing and fixing 110mm PVC Terminal guard heavy quality ISI marked including supply of all materials, labour T&P ctc. Required for proper completion of the work. |
| 46 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :DSR 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern/2021 |
| 47 | Providing and fixing C.P. brass long body bib cock (Kingston, Glacier, Corbat, Allent, Hindware) of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore (DSR No. 18.51.1)21 |
| 48 | Providing and fixing C.P. brass angle valve(Kingston, Glacier, Corbat, Allent, Hindware) for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore. (DSR No. 18.53.1)21 |
| 49 | Supply and fixing C.P grating for Nahani trap of approved make including supply of all materials, labour T&P ctc. required for proper completion of the work. |
| 50 | Providing and placing on terrace (at all floor levels) 500 ltr capacity polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR No. 18.48)21 |
| 51 | Constructing brick masonry chamber of internal size 455x610 mm and 45 cm deep for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand(Zone-III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. (DSR No. 19.30.1)21 |
| 52 | Constructing brick masonry chamber of internal size 110x50x77.5 cm for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand(Zone-III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. (Based on DSR No. 19.29.1)/21 |
| 53 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 54 | (i) 25 mm nominal boreDSR 18.17.1/21 |
| 55 | (i) 40 mm nominal boreDSR 18.17.3/21 |
| 56 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required DSR 17.3.1 |
| 57 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap DSR 17.7.2 |
| 58 | Part-C :- Internal Electrification |
| 59 | Wiring point for light with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn insidePVC conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG GI earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed. including matching colour wash (PWD SI N0-138(c)) |
| 60 | Wiring point for fan/fresh air fan with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside PVC conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG GI earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed. including matching colour wash (PWD SI N0-140(c)) |
| 61 | Wiring point for call bell with 1.5 Sqmm FRLSH PVC insulated multistrand copper conducter cable as earthwire drawn inside PVC conduit concealed in walland partly laid in slab alongwith the reinforcement before concreting, complte with 14 SWG copper with earth connectvity wire and piano type bell push or 2 pin socket etc, complete all respect including maching colour wash. (PWD SI N0-142(c)) |
| 62 | Wiring point for Plug with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside PVC conduit pipe concealed in the wall complete and partly laid in slab alongwith the reinforcement before concreting] completewith 14 SWG GI earth continuity wire, piano type switch & socket on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect, as directed.including matching colour wash. (PWD SI N0-141(c)) |
| 63 | Wiring point for HPMV/ Power Plug with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside PVC conduit pipe concealed in the wall complete and partly laid in slab alongwith the reinforcement before concreting] completewith 14 SWG GI earth continuity wire, 15 amp. piano type switch & socket on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect, as directed.including matching colour wash. (PWD SI N0-143(c)) |
| 64 | S/Wiring of submain with one number 2.5 sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside 20mm dia heavy duty PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG GI earth continuity wire including matching colour wash etc complete in all respect. (PWD SI N0-261C) |
| 65 | Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work SOR 1203(A) |
| 66 | S&F of 6 Amp to 32 Amp S.P. M.C.B.(10KA) C curve. Cat-A (PWD S.I. No.1002)18 |
| 67 | S/F surface/flush mounting 4 ways SPN distibution board withoutMCB complete in all respect,as directed by the Engineer in charge. Cat-A (PWD S.I. No 1022)/18 |
| 68 | S&F of 63 Amp D.P. Isolater. Cat-A(PWD S.I. No 1005 B)/18 |
| 69 | Supply and burying earth electrode for lighting conductor of 600 mm x 600mm x 6 mmG.I. plate vertically for earthing with its top at least 3 meters below ground level complete with 20 mm dia. G.I pipe for watering funnel, 30 cm squareC.I. frame with hinged cover masonary housing alternate layers of charcoal/ coke and salt at least 150 mm thick around etc as per directions of E/I complete in all respect. (PWD S.I. N0-706)/18 |
| 70 | Supply and fixing of vertical down conductor of 32mm x 6mm G.I strip etc. on approved clamps on surface for lighting conductor complete in all respects. (For three or four storeyed buildings. [PWD S.I. No. 713(B)]/2018 |
| 71 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect.SOR NO 1424/2018 CAT- AAA |
| 72 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 175 to 200 Watt. Confirming to IP 66 Protection complete in all respectsSOR NO 1455/2018 CAT- AAA |
| 73 | FRAME WORK |
| 74 | M.S. or iron work of in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary.wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.SOR 503/2022 |
| 75 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.DSR 12.50/2021 |
| 76 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.51.1/2021 Ridges plain (500 - 600mm) |
| 77 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size DSR 12.45.1/2021 |
| 78 | Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked.[SOR 1142 ELE 2018] |
