|
| 1 | Taking down carefully copper/ aluminium point wiring (Light, fan, socket, power and Bell) complete, including unscrewing from board out let boxes, fitting and fixtures such as switches, sockets, ceiling roses, lamp, holder brackets, ceiling/wall light fittings and regulators etc and making good disturbed surface of walls, floors, etc. complete all as specified and as directed. |
| 2 | Taking down, shifting and refixing carefully copper/ aluminium point wiring (Light, fan, socket, power and Bell), including unscrewing from board out let boxes, fitting and fixtures such as switches, sockets, ceiling roses, lamp, holder brackets, ceiling/wall light fittings and regulators etcand making good disturbed surface of walls, floors, etc. complete all as specified and as directed.Note:- Quoted Rates shall be inclusive of supply and fixing up to 1.5 metre Casing capping,suitable size of wire, same as existing wire, sunken type pressed steel terminal boxes of required size with 3mm thick Bakelite steel white/coloured top cover, for extension of point wiring. |
| 3 | M&L for point wiring,with1.5 Sqmm, single core, multi stranded, copper conductor PVC insulated, FRLS, unsheathed cable, 1100 Volts grade, drawn through and including PVC casing, capping with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc, including sunken type pressed steel terminal boxes of size with 3mm thick Bakelite steel white/coloured top cover, including 1.5 Sqmm size PVC insulated, unsheathed, copper earth continuity conductorto common earth and connecting to earth dolly suitable for the following complete all as specified and as directed:- |
| 4 | One light/fan point, controlled by one switch, 5 Amps, one way, single pole. |
| 5 | One bell point controlled by one switch,5 Amps, one way, single pole. |
| 6 | One 3 Pin, socket out let, 5 Amps, on the same board. |
| 7 | One 3 pin, socket out let, 5 Amps, on the independent board. |
| 8 | All as per item No. 3.00 here in beforebut point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire with 2.5 Sqmm single core cable for one 3 pin, 15 Amps socket out let point on independent board complete all as specified and as directed. |
| 9 | S&F in repair switch piano flush type, 230 Volts, 5 Amps, single pole complete all as specified and as directed. |
| 10 | S&F in repair Socket outlet 3 pin, 5A, flush type, 230 Volts complete all as specified and as directed. |
| 11 | S&Fin repair Switch socket combination, 5 in 1, 3 pin, 5 and 15 Amp, flush type universal, 230 Volts complete all as specified and as directed. |
| 12 | S&F in repair bell push, 5 Amps, flush type complete all as specified and as directed. |
| 13 | S&F in repair bell, Ding dong, AC, 230V complete all as specified and as directed. |
| 14 | S&F in repair switch piano flush type, 230 Volts, 15 Amps, single pole complete all as specified and as directed. |
| 15 | S&F in repair Modular switch, one way, 10 Amp, 230 Volts,1 module complete all as specified and as directed. |
| 16 | S&F in repair Modular switch, 16/20 Amp, 230 Volts, 1 module complete all as specified and as directed. |
| 17 | S&F in repair Modular socket, 6/10 Amp, 230 Volts, 2&3 pin, combined, 2 module complete all as specified and as directed. |
| 18 | S&F in repair Modular socket, 16/20 Amp, 230 Volts, 2&3 pin, combined, 2 module complete all as specified and as directed. |
| 19 | S&F in repair Modular white, cover plate with frame, 1 module complete all as specified and as directed. |
| 20 | S&F in repair Modular white, cover plate with frame, 2 module complete all as specified and as directed. |
| 21 | S&F in repair Modular white, cover plate with frame, 3 module complete all as specified and as directed. |
| 22 | S&F in repair Modular white, cover plate with frame, 4 module complete all as specified and as directed. |
| 23 | S&F in repair Modular white, cover plate with frame, 6 module complete all as specified and as directed. |
| 24 | S&F in repair Modular white, cover plate with frame, 8 module complete all as specified and as directed. |
| 25 | S&F in repair Modular white, blank plate, 1 module complete all as specified and as directed. |
| 26 | S&F in repair Modular white, blank plate, 2 module complete all as specified and as directed. |
| 27 | S&F in repair Modular white, step Fan regulator, 100 watt, 2 module complete all as specified and as directed. |
| 28 | S&F in repairflexi bell, the wireless door bell with no interference including all accessories like remote and Batteries complete all as specified and as directed. |
| 29 | S&Fin repair uni Switch socket combination, with box, with 2 fixing holes, 5 in 1, 3 pin, 20 Amps and 10 Amp, flush type universal, 240 Volts complete all as specified and as directed. |
| 30 | S&Fin repair 6 Amps, 3 pin, Super Plug top complete all as specified and as directed. |
| 31 | S&Fin repair 16 Amps, 3 pin, Super Plug top complete all as specified and as directed. |
| 32 | S&Fin repair 6/10/13 Amps, Spike Guard, with 4 Nos sockets controlled by single switch, indicator and overload protection, voltage Surge protection, moulded plug confirming to ISI requirement, with 1.5 Metre, 3 core, 2.5 Sqmm insulated wire, versatile socket compatible with multi plug special slot to hang product vertical. |
| 33 | S&Fin repairIsolator SP/MCB230 Volts,6 to 32Amp,suitable for existing Make and model complete all as specified and as directed. |
| 34 | S&F in repair Isolator, TPN,415Volts,63Amp suitable for existing Make and model complete all as specified and as directed. |
| 35 | S&F in repair MCCB, TPN, 100 Amps, 415 Volts, breaking capacity 16 KA complete all as specified and as directed. |
| 36 | S&F in repair MCCB, TPN, 125 Amps, 415 Volts, breaking capacity 16 KA complete all as specified and as directed. |
| 37 | S&F in repair MCCB, 4 Pole, 160 Amps, 415 Volts, breaking capacity 36 KA complete all as specified and as directed. |
| 38 | S&F in repair MCCB, 4 Pole, 200 Amps, 415 Volts, breaking capacity 36 KA complete all as specified and as directed. |
| 39 | S&F in repair MCCB, 4 Pole, 250 Amps, 415 Volts, breaking capacity 36 KA complete all as specified and as directed. |
| 40 | S&F in repair Bi-pin Holder suitable for 18/24/36 fluorescent tube light fitting complete all as specified and as directed. |
| 41 | Taking down ceiling fan/cabin fan/Duct fan of any sweep and dismantling fan blade, dismantling electric connection, removing capacitor, checking of bearings/bushes, cleaning the fan blades with clear water, scrapping the fan blades, placing the bearing, bush, capacitor, rewinding complete,re-assembling the ceiling fan complete includinggreasing, oiling, testing the same & making the fan serviceable and re-hanging and connecting withthe ceiling rosecomplete all as specified and as directed.Note: rewinding, bush, bearing, capacitor, twin core, flexible cable shall be measured and paid for separately under respective item of this Schedule. |
| 42 | All as per item No 39.00 here in before but for exhaust fan 300/ 450mm sweep, any type complete all as specified and as directed. |
| 43 | M&L in replacement re-winding of ceiling fan motor of any type and size, using copper winding wire of same as existing gauge including replacement of insulated paper, varnishing,including cleaning/greasing, including removing old burnt wire complete all as specified and as directed. |
| 44 | All as per item No 41.00 here in before but for pedestal fan/cabin fan/duct fan, 350/400/450mm sweep, any type complete all as specified and as directed. |
| 45 | All as per item No 41.00 here in before but for exhaust fan 300/450mm sweep, any type complete all as specified and as directed. |
| 46 | All as per item No 41.00 here in before but for duct type exhaust fan, any type complete all as specified and as directed. |
| 47 | Supply only in repair ball bearing for 1200mm sweep ceiling fan as required at site complete all as specified and as directed. |
| 48 | Supply only in repair ball bearing for 300/450mm sweep exhaust fan/duct fan as required at site complete all as specified and as directed. |
| 49 | Supply only in repair gun metal bushfor 300/450mm sweep exhaust fan as/duct fan required at site complete all as specified and as directed. |
| 50 | Supply only in repair rubber insulator Heavy duty with bolts nuts & split pin etc complete for 1400/1200mm sweep ceiling fan complete all as specified and as directed. |
| 51 | Supply only in repair capacitor of 2.5 MFD for Ceiling/ Exhaust fan complete all as specified and as directed. |
| 52 | Supply only in repair capacitor of 4 MFD for Ceiling/ Exhaust fan complete all as specified and as directed. |
| 53 | S&F in repair pedestal fan/cabinfan blade any sweep, suitable for existing fan complete all as specified and as directed. |
| 54 | S&F in repair fluorescent Tube rod 36/40 Watt, 230 Voltcomplete all as specified and as directed. |
| 55 | S&F in repair fluorescent Tube rod 18/20 Watt, 230 Voltcomplete all as specified and as directed. |
| 56 | S&F in repair Tube rod 14 Watt, 230 Volt, T-5 type,complete all as specified and as directed. |
| 57 | S&F in repair Power saving LEDlight fitting, 9 Watt,2 feet (Approx),230 Volt complete all as specified and as directed.Make: Havells Cat No LUMILINEBS9WLED865SPCWH or equivalent Model ofMake mentioned in PS. |
| 58 | S&F in repair Power saving LED glow batten, 4 step dimmingfitting light 18/20 Watt,4 feet(Approx), 230 Volt,turn off and on in 5 second with a click of switch complete all as specified and as directed.Make: Havells Cat No LHEXBLP7JN1W018 or equivalent Model ofMake mentioned in PS. |
| 59 | S&F in repair decorative ultra slim, round profile, LED light fitting,with extruded polycarbonate, environment friendly, energy Power saving, LED glow batten fitting light 20/22 Watt, 4 feet (Approx), 230 Volt complete all as specified and as directed. Make: Havells Cat Part No LHEXBLP7PN1W020or equivalent Model ofMake mentioned in PS. |
| 60 | S&F in repair Power saving LED Colour changing Batten light fitting,20/22 Watt, 4 feet (Approx), 230 Volts, turn off and on in 5 second tochange colour complete all as specified and as directed. |
| 61 | S&F in repairBallast electronic slim 1X36/40 Watt complete all as specified and as directed. |
| 62 | S&F in repairBallast electronic slim 1X18/20 Watt complete all as specified and as directed. |
| 63 | S&F in repairBallast electronic slim 4X14 Watt complete all as specified and as directed. |
| 64 | S&F in repair Universal starter for 110V/230V/240 V, 18 W/20 W/36 W/40 W/65 W/80 W FTL & 18/36 W FP-L (CFL) complete all as specified and as directed. |
| 65 | S&F in repairCFL, 18 Watt, 4/2 pin, 230 Volts complete all as specified and as directed. |
| 66 | S&F in repair non retrofit CFL, 4 pin, PL type, 36/40 Watt, cool day light,230 Volts complete all as specified and as directed. |
| 67 | S&F in repairCFL, 18Watt, 3U or spiral, E27 cap,230 Volts complete all as specified and as directed. |
| 68 | S&F in repairCFL, 11Watt, 3U or spiral, E27 cap,230 Volts complete all as specified and as directed. |
| 69 | S&F in repair 6 Watt, LED capsule/LED GU 10 /GU10C /candle LED SES, E-14 small screw cap, 230 Volt or as required as per site requirement complete all as specified and as directed. |
| 70 | S&F in repairLED Lamp, 0.5Watt,230 Volts complete all as specified and as directed. |
| 71 | S&F in repairLED Lamp, 9 to 12 Watt,230 Volts Screw/pin type complete all as specified and as directed. |
| 72 | S&F in repairLED Lamp, 18 Watt,230 Volts complete all as specified and as directed. |
| 73 | S&F in repair PVC insulated,1.50 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed. |
| 74 | S&F in repair PVC insulated,2.50 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed. |
| 75 | S&F in repair PVC insulated,4.0 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed. |
| 76 | S&F in repair PVC insulated,6.0 Sqmm, single core, copper conductor, FRLS complete all as specified and as directed. |
| 77 | M&L for preparing old painted steel tubular poles, including cleaning the surface of poles by rubbing with emery Paper to remove oil stains, dust etc and applying two coat of existing colour synthetic enamel paintby spray paint to steel tubular pole of height above 7 Metre up to11 metre, including cross arms, Bracket etc including writing Pole No on each pole with black paint on yellow circle complete all asspecified and as directed. |
| 78 | M&L for preparing old painted steel tubular poles, including cleaning the surface of poles by rubbing with emery Paper to remove oil stains, dust etc and applying two coat of existing colour synthetic enamel paintby spray paint to steel tubular pole up to 7 metre height including cross arms, Bracket etc including writing Pole No on each pole with black paint on yellow circle complete all asspecified and as directed. |
| 79 | S&F in repair 100 Watt, New generation, energy saving and environmental friendly, long life, LED Street Light fitting, made out of pressure die cast aluminium housing, with high power LED as lighting source with toughened glass top cover, top opening, separate driver compartment, with IP66 protection, impact resistance of IK07, with 10KV Built-in Surge Protection Device complete all asspecified and as directed. Make: Havells, Cat Part No. - ENDURAPEARLMAGNUMSL100WLED757PASYTOTGASTor equivalent Model ofMake mentioned in PS. |
| 80 | S&F in repairEnergy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, flood light, 200 Watt, IP66, with high power LEDs as light source, complete with all related accessories and Wall or surface mounting using adjustable MS bracket with screws complete including connecting to Electric supply complete all asspecified and as directed. Make: Havells, Cat Part No. - JETA VALOURFL200WLED757PINTWBLT Gor equivalent Model ofMake mentioned in PS. |
| 81 | S&F in replacement Automatic Hand Dryer with Heating element and Hot/Cold Switch and with the following specifications : Body Material : ABS Plastic (White), Finish : white, Mounting : Wall Mounting, Operation : Fully Automatic, Motor : Brush AC type, Power : 1000W, Voltage : 220V/50Hz, Current : 0.9A, Water Splash Proof : IPX1, Blowing Volume : 90 Cum/Hour, Time Protection : 60 Seconds auto cut-off, Sensing Range : 20cm +/- 5cm, Air Speed : 35 +/- 2 m/s, 18000RPM, Drying Time : >20 Sec, Noise Level : 75DB, Dimension : 255x145x130mm complete all as specified and as directed. |
| 82 | S&F in repair Pull Cord Switch or rotary Switch, 5 Amp, 250 Volt, one way, to ON and OFF the indicator lamps complete all as specified and as directed. |
| 83 | S&F in repair Brass lamp holder (batten type/ pendent type/Brass Back plate Lamp Holder/Burfi holder etc), base capB22/E-14/E-27 as required at site complete all as specified and as directed. |
| 84 | S&F in repair recessed type, 34W to 36W, Full window glare free, opal Diffuser LED Panel light fitting, size 595X595mm, suitable for Existing false ceiling, with MS Powder coated White Housing, total system Lumen of 34W to 36W LED shall be 3800 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD (%) < 10, LED Lamp Efficacy>140 Lm/W with Average life of 50000 Burning hours, Complete with all accessories as required with connections complete all as specified and as directed.Make- Havells Cat Part No.- VENUSNEOHE2X2PLR18-42WLED830MOD, Driver Model LEDDRIVER36V36WS/ Philips Cat Part No- RC380B LED36S -6500 G4 L60 W60 PSU OD or equivalent Model of Makes Mentioned in PS |
| 85 | S&F in repair recessed type, 15W to 18W LED Round Down light with pressure die-cast aluminium heat sink & glare free opal Diffuser of size 160mm Dia (Approx) . Total system Lumen of 15W to 18W LED should be 1400 or above in Cool day Light (5600K to 6000K), Power factor>0.95, CRI>80,LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make- Havells Cat Part No - EDGEPRORDDLR15WLED857S/Philips Cat Part No - DN 394B LED16S-6500 PSU WH or equivalent Model of Makes Mentioned in PS. |
| 86 | S&F in repair Recessed type, 15W to 18W, Full window glare free, opal Diffuser, LED Panel light fitting, size 300X300 mm (Approx) with MS Powder coated White Housing, total system Lumen of 15W to 18W,LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make-Havells Cat Part No - PLUTO1X1PLR15WLED857S or equivalent Model of Makes Mentioned in PS. |
| 87 | S&F in replacementLED decorative post Top lantern, 25Watt,including all accessories, complete fixing accessories and clamp, including4 metre height black painted glavanized pole, fixed in position including necessary PCC work and excavationas per manufacturer\"s instruction complete all as specified and as directed. Make:-CG, Cat Part No:- LPTSA-30-Tor equivalent Model of Makes Mentioned in PS. |
| 88 | S&F in replacementLED decorative post Top lantern, 35Watt,including all accessories, complete fixing accessories and clamp, including4 metre height black painted glavanized pole, fixed in position including necessary PCC work and excavationas per manufacturer\"s instruction complete all as specified and as directed. Make:-CG, Cat Part No:- LPTOI-45- CDL/Tor equivalent Model of Makes Mentioned in PS. |
| 89 | S&F in repair Heat Pillar (Portable Heaters), Mild steel body, 1500 Watts, with twin quartz tube for direct heating, safety tip over switch cuts off the heater in case it is tilts or falls, two heat setting (400 Watt/800 Watts) for maintaining desired room temperature, powder coated finish to prevent corrosion, operating on 230 Volts, AC, 50 Hzs complete all as specified and as directed.Note:Old heat pillar shall be deposited in MES Store yard by the contractor. |
| 90 | S&F in replacementLED decorative, wall mounting, light fitting, with plastic body, suitable for B22 type LED/CFL lamp, with opal white, PC diffuser poetics for glair free light, including mounting brackets etc complete,including one No 9 Watt LED Lamp complete all as specified and as directed.Make:-Havells Model Stylo Wall Light or equivalent Model of Makes Mentioned in PS. |
| 91 | Supply only DHPP \"N\"for running DG sets installed at Power House ofCGDA complex and CENTRADfrom nearest Petrol Pump complete all as specified & as directed. Note:The DHPP \"N\" stock shall be maintained at least 2000 Litre within 15 days from date of commencement of work and further shall be top up as per requirement bases and as directed by Engr-in-Charge.A penalty of Rs 1000.00 per day shall be imposed on the contractor, if minimum stock levels are not maintained within 24 Hours of demand raised by Engr-in-Charge.Strict compliance shall be ensured to avoid failure of standby supply due to non availability of DHPP \"N\". |
| 92 | S&Fin repair digital Voltage Stabilizer of capacity 1 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of +2.5%completeall as specified and directed.Make: V-Guard Model No :- VGSD 50 or equivalent model of Bluebird, Emerson |
| 93 | S&F in repair digital Voltage Stabilizer of capacity 2 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of + 2.5%complete all as specified and directed.Make: V-Guard model No VGSD 100 or equivalent model of Bluebird, Emerson |
| 94 | S & F in replacement PVC body Exhaust fan, 250 mm sweep ,1200 RPM,5 blade, off white, 240 Volt, with louver shutter, including necessary connection with flexible PVC Copper cable, 3 core, size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and as directed. |
| 95 | Taking down the geyser from its existing position for general cleaning/overhauling, cleaning and descaling the tank and assembly with suitable detergent and making fully serviceable(the item required for serviceability shall be measured in respective Sch \"A\" item mentioned hereafter) and refixing in new/old position complete with testing all as specified and as directed. |
| 96 | Supply only in replacement of fusible plug type (pressure valve) Air release valve. |
| 97 | Supply only in replacement air release valve (Nozzle) all as spec ified as per sample. |
| 98 | Supply only in replacement gasket of thickness 5 mmfor geyser assembly of 06 holes/ 08 holes / 09 holes all as specified and as directed. |
| 99 | Supply only in replacement Syphen assembly ofcopper, 06/ 08/ 09 holes with nut bolts/slud/washer all as specified and as directed. |
| 100 | Supply only in replacement MCB SP 20 Amp, 240 Volt with 3 pin top and metal clad socket 20 Amp with sheet metal enclosure complete all as specified of Make-Havells/HPL/Standard) |
| 101 | Supply onlyin replacement of indicating lampfor geyserrectangular type/round type. |
| 102 | Supply only in replacement industrial type metal clad socket only of 20 Amps Make- Anchor/Havells/Standard |
| 103 | Supply only in replacement of metal clad top 20 AmpMake- Anchor/Havells/Standard |
| 104 | Supply only in replacement inner shell of Geyser of cap 25 Ltr made out of steel tank complete all as specified. |
| 105 | All as per Srl item No 100 here in before but 35 Ltr Cap. |
| 106 | All as per Srl item No 100 here in before but 50 Ltr Cap. |
| 107 | S&F fastner mild steel 150 mm long x 10 mm dia with pin and bolts complete for hanging of geyser properly on wall and making good to the disturbed surfaces including plastering and white washing all as directed. |
| 108 | Taking down geyser from existing location for preparation of body of geyser by knotting and stopping of outer surface, repainting the complete outer surface of geyser with one coat of synthetic enamelled paint 1st quality Make- Berger/Asian and refixing the same on wall in existing location and writing \"GE E/M BHDC\" of letter size 10 mm all as directed. |
| 109 | Unscrew the nutbolt and taking out the base plate geyser assembly andcopper tank making soldering and brazing of tank to stop the leakage of tank and fixing back in the position of geyser. |
| 110 | Supply only outer body of Geyser Cap 25/ 35/ 50 Ltr of 20 SWG MS Sheet duly painted all as specified. |
| 111 | Supply only in replacement PVC connection heavy duty of ss body and SS nut for hot/cold water of size 15mm x 600 mm long. |
| 112 | Supply only in replacement PVC connection heavy duty of SS body and SS nut for hot/cold water of size 15mm x 450 mm long. |
| 113 | Supply only in replacement thermostat switch of gysers (adjustable type). |
| 114 | Supply only in replacement heating element 1.5 KW (round type) with rubber gasket. |
| 115 | All as per item No.110 here in before but round type type2 KW (as per sample) |
| 116 | All as per item No.110 here in before but triangle type1.5 KW (as per sample) |
| 117 | All as per item No.110 here in before but triangle type 2 KW (as per sample) |
| 118 | S&F in repair 5 star rated vertical mounted Water heater geyser body of capacity 25ltrs having dimensions 360x380x515 mm. Features: outer body-ABS, Safety feature-Multi function safety valve, thermostat, thermal cutout, viterous enameled glass line tank with CRCA outer body with powder coated with heavy duty anode rod prevent from corrosion & permanent scaling with adjustable knob for temp setting between 30°C to 75°C, high density PUF for thermal insulationwith LED power indication.Technical specifications: voltage-230V, Type-storage, Frequency-50Hz, Wattage- 2 Kilo Watts,Pressure-8 Bar, Pressure Class- Class 1. |
| 119 | Supply only in replacement Geyser Installation Kit, Suitable for all kinds of water heaters / Geysers, 1 Litres to 100 Litres, Kit Includes 2 Nos ( or 1 Pair) offlexible Connection Pipes Premium Steel Ribbed, Bolts (Coach Screws) & washers / Connection Nipple / 15A Plug / Teflon Tape / Angle Valve Brass etc complete all as specified and as directed. |
| 120 | S&F in repair Hot air blower, Heat convector, 2 KW capacity, with blower and temp control mechanism and indications, operating on 230V, AC, 50 HZ complete all as specified and as directed. |
| 121 | S&F in repair Flykiller metal type (65x21.5x35)cm 15 watt 03 nos tube, fully automatic on 230V, AC, 50 HZ complete all as specified and as directed. |
| 122 | S&F in repair Surface mounting type, 15W Aesthetically designed 1x1 LED flat PanelFull window glare free, opal Diffuser, LED Panel light fitting, sizewith MS Powder coated White Housing, total system Lumen of 15W to 18W,LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make-Havells Cat Part No - PLUTOSURFACE1X1PLR15WLED857S or equivalent Model of Makes Mentioned in PS. |
| 123 | S&F in repair Surface mounting type, 42W Aesthetically designed 2x2 LED flat PanelFull window glare free, opal Diffuser, LED Panel light fitting, sizewith MS Powder coated White Housing, total system Lumen of 15W to 18W,LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make-Havells Cat Part No - PLUTOSURFACE2X2PLR15WLED857S or equivalent Model of Makes Mentioned in PS. |
| 124 | S&F in repair Surface mounting type, 34W Aesthetically designed 1x4 LED flat PanelFull window glare free, opal Diffuser, LED Panel light fitting, sizewith MS Powder coated White Housing, total system Lumen of 15W to 18W,LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make-Havells Cat Part No - PLUTOSURFACE1X4PLR15WLED857S or equivalent Model of Makes Mentioned in PS. |
| 125 | S&F in repair Surface mounting type, 24W Aesthetically designed 1x4 LED flat PanelFull window glare free, opal Diffuser, LED Panel light fitting, sizewith MS Powder coated White Housing, total system Lumen of 15W to 18W,LED shall be 1200 or above in Cool day Light (5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED Lamp Efficacy>140 Lm/W, with all accessories as required with connections complete all as specified and as directed. Make-Havells Cat Part No - lheaakp7IL1W024 or equivalent Model of Makes Mentioned in PS. |
| 126 | S&F in repair 4watt 5000K white DESKLITE SLEEK WITH ADJUSTABLE LAMP SHADE AND CONNECTING ROD WITH FLEXIBLE TURNING MANUAL SWITCH with all accessories as required with connections complete all as specified and as directed. Make-Havells Cat Part No - LHEXBVP7SN1W005 or equivalent Model of Makes Mentioned in PS. |
| 127 | S&F in repair GI Fan blade.suitable. |
| 128 | S&F in repair Suitable for desert cooler PVC connection set of threecomplete as existing. |
| 129 | S&F in repair suitable for desert cooler 3 core flexible copper conductorcable of size 0.5 Sqmm. |
| 130 | S&F in repair Grass padset of 3 pads superiorquality ,weight of each setnot less than 0.50 kg. |
| 131 | S&F in repair Front grillof suitable size.4\"x4\" suiatable for Existing desert cooler |
| 132 | S&F in repair Fan motor single phase 50 Hz 230VAC max Amp 1.5 as existing. |
| 133 | S&F in repair Water submersible pump 240VAC 50 Hz 10W 5 LPM 2 mtr head. |
| 134 | S&F in repair ON-OFF switch 5 Amp 240Vfor water pump. |
| 135 | S&F in repair Selector switch 5 Amp 240V asexisting. |
| 136 | S&F in repair Mounting bracket for fan motorwith nut & bolt etc. as existing. |
| 137 | S&F repair Capacitor 4 Mfd + 5% 440VMPP ‘SH’. |
| 138 | S&F in reapir GI shutters suitable for cooler 4’ x 4’. |
| 139 | S&F in Repair Industrial motor suitable for 24 sweep fan. |
| 140 | Electronic water level indicator (LED type showing three level). |
| 141 | M&L for dismantling of all components from GI body evaporative cooler (desert cooler) metal body very carefully viz exhaust fan, water pump, grass pad, water distribution line etc with and including preparation of exterior and interior portion on cooler to a smooth finish and applying one coat ofbituminous paint and reassembling the samein the cooler for smooth running complete all as directed.Note:- If any worn out items noticed during reassembling the same shall bemeasured and paid separately. |
| 142 | M&L for dismantling of all components from Plastic bodyevaporative cooler (desert cooler) metal body very carefully viz exhaust fan, water pump, grass pad, water distribution line etc with and including preparation of exterior and interior portion on cooler to a smooth finish and applying one coat ofbituminous paint and reassembling the samein the cooler for smooth running complete all as directed.Note:- If any worn out items noticed during reassembling the same shall bemeasured and paid separately . |
| 143 | S&F in repair Fan main motor copper winding single phase 50 Hz 230VAC 107 watt Heavy Body Motor, 1330 RPM,max Amp 1.5 as existing. |
| 144 | S&F in repair Air cooler swing motor Ac 220-240 V, 3 RPm 4watt, 50 Hz, Torque 4Kgf.Cm, Shaft Rotation. |
| 145 | S&F in repair Air cooler Dura Pump Ac 220-240 V, 14 watt, 50 Hz. |
| 146 | S&F in repair Air cooler PCBAc 220-240 V. |
| 147 | S&F in repair Air cooler 6 Blade Ac 220-240 V. |
| 148 | S&F in repair 25 Litres capacity electric Storage Water Heater of specification 230 Volt AC, 50 Hz,2KW rated Incoloy Glass Coated Heating Element, Digital temperature indicator Display, inner container made up of Feroglas TM Technology, Feather Touch Panel for temperature setting with all connecting accessories (1 Geyser, Shock-Safe power cord with 3 pin plug, 1 manual, Wall mounting accessory & 2 flexi pipe etc) complete as specified anddirected by Engr-in-Charge. |
| 149 | Supply and Fix in repair ceiling mountedcast copper with K9 Crustal instalation chandelier with 16x5 watt Led Candle watt Led Lamp Base E14 Dimensios (in CM) D-98x H-240with Suitable Size os SS Chain. Note: Chalinder Approved by Engr-in-Charge. Make Tisva Code No CG 16002/Jaguar/Bajaj |
