Supplying Of Covered Tipping Refuse/Garbage Trailer(Refuse Vat) 2 Nos For Haldibari Municipality

Sharing tender

Supplying Of Covered Tipping Refuse / Garbage Trailer ( Refuse Vat ) 2 Nos For Haldibari Municipality Supplying Of Covered Tipping Refuse / Garbage Trailer ( Refuse Vat ) 2Nos. For Haldibari Municipality , Covered Tipping Refuse / Garbage Trailer: , Supplying Of Covered Tipping Refuse / Garbage Trailer ( Refuse Vat ) Having Specifications: 1. Stainless Steel Body- Box Type, Size-10-0 × 6-0 × 2-0 ( +17 ) , Tipping, Two Wheeler, Capable Of Being Drawn By Tractor. 2.Chassis: To Be Fabricated From M.S. Channel 100× 50 × 6 Mm With Cross Member Of Same Section For Upper Chassis & 125 × 65 × 6 Mm M.S.Channel For Lower Chassis With Cross Member Of Same Section. 3. Drawbar: Tri-Angular A Type Drawbar To Be Fabricated Form 100 × 50 × 6 Mm M.S. Channels Fitted With Spring Loaded Eye Hook ( 40Mm M.S. Round ) , Parking Screw Jack Made Of 2 M.S.Round ( 2-8 Long ) With 3 M.S. Round Nut Fitted In M.S. Channel - 100×50×6Mm. 4. Platform: To Be Fabricated From M.S.Channel 75×40×6Mm With Cross Member Of Same Section, By Means Of Jeep Type Covered With 4Mm Thick Stainless Steel Plate-304 Grade, Electrically Welded All Joints. 5. Side Boards: Four Nos Of Side Boards To Be Fabricated Form M.S. Angle 45×45×6 Mm With Cross Member Of Same Section Covered With 12 Gauge Thick Stainless Steel Plate- 304 Grade. Out Of 4 Nos. Side Boards Three Sides Will Be Open For Remobal Of Garbage And Front Side Will Be Closed. 6. Divider- One No. Divided Will Be Insert The Inner Portion Of Traileer For Bio-Degradale & Non-Degradable Of Size- 6-0 × 2-0 ( +17 ) Each. Back Cover Will Made In Such A Way That Only Either Bio Degradable Or Non Degradable Item Comes Outside And Made From M.S. Angle, Flat & 12 Gauge Stainless Steel Sheet. 7. Hydraulic Tipping Arrangement- 1 No. Telescopic Type Hydraulic Ramp ( 15 M.Ton ) Fitted To The Lower Chassis Of The Trailer Complete With Hydraulic Hose, Coupling Etc. To Tip The Body At An Angle 40 / 50 Degree. 8. Covered Portion- To Be Fabricated Form M.S. Angle 35×35×6 Mm & 40×40×6Mm Covered With 14 Gauge Thick Stainless Steel Sheet 304 Grade.Two Nos. Loading Dala On Each Side. 9. Wheel Equipment- Two Nos Of Pneumatic Tyre Wheel 9.00×16 ( Nylon, 18 Ply ) With Tube ( Ceat / Mrf / Good Year / Jk ) And Heavy Duty Churri Rim Fitted On High Tensile Strength 70Mm Sq. Axle, Heavy Duty Forged Steel, Hubs, Taper Roller Bearing -30209 & 30211 Skf. 10. Suspension- 2 Nos Semi Arc Type Fabricated Spring Or Suspended Spring 32-70×12Mm - 13Ply Fitted Under The Chassis With U-Clamps, Jullon Patti, U-Bolts Etc. 11. Construction- Arc Welded & Bolted. 12. Mirror Polish Finishing. Painting- Tow Coats Of Ici Synthetic Enamel Paint Over A Coat Of Primer In Outside One Side Marked As Blue And Other Side Marked As Green & In Inside Anticorrosive Black Paint Over Red Oxide Primer Only On Iron Portion And Embossing The Name Of Our Office. 13. Warranty- 1 Year Warranty