Urban Local Bodies has published Tender For Green Belt In Sector 10A From Gate No 9 To Bikaner Estimate For Construction Of Boundary Wall (Fancing ) And Devlopment Of Chowk,Along Khandsa Road Ward- 23 , Zone- Iii , Under Municpal Corporation Gurugram (Haryana). Submission Date for this Tender is 18-01-2023. Wall Construction Tenders in gurugram Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | -NS `Supply and stacking of plant Malpighia coccigera of height 30-45 cm multibranched in earthen pots of size 20 cm |
| 2 | -Providing Steel Banch For Sitting 5 Feet Long 16000x2500 |
| 3 | ? 26.4.2 Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in all kinds of soils Area 1m x 1 m ? 26.13.6 `Digging of pits in all kinds of soil and refilling the same with the excavated earth mixed with well decayed FYM @ 30% of pit volume and insecticide for termite control (excluding cost of FYM and insecticide) Size of pits: 0.45 m x 0.45 m x 0.45 m = 0.091125 cum (Manure to be taken from Solid Waste Plant Bandhwari, Gurugram)` ? 26.18Supply and planting disease free, healthy, vigorous, growing more than 75 cm height permanent shrubs in already prepared pits, supplied in 25 cm x 2o cm polybags, application of 10 ml chlorphriphos 20% EC termiticide each and watering through the tractor tanker ? 3.1.3 Carriage of manure from Bandhwari Plant (Average lead of 15 KM up to site of plantation) Quantity of manure required 0.091/3 = 0.03 cum. ? Add EPF 13% on 50 % cost considering as labour component ? Add ESI 3.25% on 50 % cost considering as labour component. |
| 4 | `Supply and stacking of plants Jasminum grandiflora 1`.6`` - 2` ht. 8``x10`` polybag well grown ` |
| 5 | HSR Good Earth for filling un-even land [HSR 3.1.2plus17.8.2plus 17.8.3] (228.00) SDS. |
| 6 | Maintenance of Shrub plant for one month for the 1st three years of age including weeding, hoeing , plant protection ,watering from Deptt. source , application of 10 ml chlorpyriphos four times, 0.0289 cum FYM each,50 gm urea and 50 g DAP twice ,replacement of casualty, disposal of debris and other activities. etc.( The HSR rates are exclusive of EPF and ESI but inclusive of all other taxes, GST, Labour welfare Cess and Contractor`s profit. Therefore EPF@13% and ESI@3.25% has been added additionally considering 50 % as labour component for fixing.) |
| 7 | Maintenance of tree plant |
| 8 | Providing Ipomea purpurea (Morning glory) plant of height 30 cm to 45 cm in 20 cm size of Earthen pots / Plastic pots |
| 9 | Sign board Acp sheet 4mm and White Reflector 3mm |
| 10 | Supply and stacking of plant Murraya Koenigii spreng of ht. 45-60 cm well developed in earthen post of size 20 cm |
| 11 | TECHNICAL SPECIFICATIONS and DRAWINGS OF FENCE Specifications for ROW Greenbelts: Height 1500 mm S. No. Product/Description Item 1: Fence as per drawing /assembly: All system components as below will be fitted to provide the fence as given in the assembly drawing. The installation will be done as per the civil construction details given in the drawing for grouting the fence post. 1 Weld Mesh Panels with Fitting Accessories: (a). Weld Mesh Panels: i. Weld Mesh Panels manufactured with electrical resistance welded galvanized wires and subsequently powder coated as per specifications mentioned under. ii. Weld mesh panel for fence will meet the standards of IS 1566/ IS 4849 with the following key specifications apart from the other points in the governing specification: iii. Panel size: 2500 mm X 1500 mm (W x H). Tolerance ofplus/ - 2 % iv. Mesh Size: 50 mm X 150 mm (W X H). Tolerance ofplus/ - 2 mm. v. Weld Shear strength: Minimum 50 % of the breaking strength of the smallest wire (In this case the vertical wire) vi. Mesh Wire: Galvanized MS wire Horizontal wire, Dia. 5.0 mm ( plus /- 0.05mm): Vertical wire, Dia. 5.0 mm( plus /-0.05mm) Tensile Strength of wire: Min 500 N/sq.mm: Specification for wire: IS 280 vii. Galvanizing of wire: 100 – 120 GSM as per IS 4826 (Measurement as per IS 6745) Uniformity of Coating: As per IS 2633: Adhesion test for coating: As per IS 2629 (1985) viii. Powder Coating: The galvanized panels are subsequently single powder coated after welding with a thickness of 60 to 80 microns. ix. Powder Coating Make : Akzonoble / Jotun. x. Color: RAL 6005 (Military Green): Coating Standard: EN 10245-1/ IS 13871 xi. Other coating requirement: Powder coating should withstand 720 Hours of salt spray test as per ISO 12944, 1000 hrs of QUV-B Weatherometer Test, Adhesion test, Electrochemical Impedance Spectroscopy Test (Type Test Certificate for the coating standards from renowned Laboratories clearly indicating that the coating passes C3 or higher corrosion protections standard is to be submitted by the bidder along with technical bid). xii. Refer drawing of Panel, attached herewith. 25 mm pointed wires should be left on both sides (top and bottom only), V-band range: 100 mm to 110 mm xiii. Qty: 400 Panels / KM (c) Mushroom Head Bolts with security nuts: i. Each Omega clamp shall be supplied with two sets mushroom headed bolts with security nuts and washers. ii. Material: SS 304 iii. Size: M8 X 25 mm (i) Qty: 3208 nos. / KM Fence Post and accessories (a) Fence Post i. Type: Square Section. ii. Specification: IS 1161-2014 (Medium Grade) iii. Outer Dimension: 60 mm X 60mmplus /- 1 % iv. Thickness: 2.60 mmplus /- 10% (Medium Grade) v. Length: 2000 mmplus /- 2% vi. Galvanization: 380 GSM vii. Powder Coating: The Fence Post are subsequently single powder coated. viii. Colour: RAL 6005 Coating Standard: EN 10245-1/ IS 13871 ix. Other coating requirement: Powder coating |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
