|
| 1 | Running, maintenance and operation of DG sets, booster pump sets, sub. p/set, dewatering pump set & common area lighting, fire fightingpump sets, sprinkler system, fire alarm systems, diesel engine, lift pressurization system, P.A. system & intercom system as per inventory terms & conditions attached. |
| 2 | Rescue & Coordination lift operators for operation of OTIS make lifts as per inventory, terms and condition attached. |
| 3 | Servicing of 160 KVAkirloskar make D.G. sets i/c supply and replacementoffollowing wornout parts complete withtesting etc as reqd.a) Diesel filter b) Oil filterc) coolantd) Battery leade) Hose pipe set with clampf) Fuel pipeg) Air cleaner elementh) Self repair & servicingi) Fuel pump repair and calibration and servicing j) Engine oil |
| 4 | Servicing/repairing of 77.3 KW Diesel engine (Kirloskar make engine) i/c supply and replacement of following items i/c testing etc complete as requireda)S/R of Oil Filter SPIN type-1 No.b) S/R of Diesel Filter -1 set.c) S/R of Air cleaner element-1 setd) S/R of Coolant-5 ltre) S/R of Battery terminal-2 Nof)S/R ofEngine oil-30 ltrg)S/R of fuel pump i/c calibration and repairing og governor,nozzle pumps,injectors etc as required--1 Job |
| 5 | Repairing & over hauling ofexisting 40 HP capacity pump set suitable for 3 phase 415 volts 50 Hz AC supply after dismantling from site i/c supplying and replacement of following defective worn out parts, reassembling, re- installing, testing etc complete with to & fro cartage charges as reqd.a) Ball Bearingsb)S.S shaft c) Nuts & bolts and impeller nutd) shaft sleevee) Gland plate and gland bush |
| 6 | Rewindingof 40 HPMotorsuitable for 3 phase 415 volts 50 Hz AC supplyi/c servicing and replacement of 2 Nos ball bearings , taping , varnishingi/c dismantiling, re-eraction, testing i/cto & fro cartage charges etc as regd. |
| 7 | Dismantling and rewinding of5 HPcapacity dewatering pump setkirloskar makesuitable for 3 phase 415 volts 50 Hz AC supply and duly varnishing baking , to &fro cartage charges , reassembling and testing etc as regd. |
| 8 | Supplying & replacement of following items in the existinglight fittingscomplete with testing etc as required. a) LED tubelight Rod- 20 Watt |
| 9 | b) LED Bulb with Ordinary Holder- 20 Watt |
| 10 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.A)4 Pair |
| 11 | Supply and replacement of 12 volts 180 AH battery wih initial charging i/cconnections, testing etc as reqd. |
| 12 | Supplying & drawing following sizes of FRLS PVC insulated copper conductor, single core wire in the existing surface / recessed steel / PVC conduit as reqd. a) 16 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor wire |
| 13 | Supply and replacement offollowing rating and breaking capacity andpole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holesin cubicle panel, making connections, etc. as required.A) 400 A,50KA,FPMCCB |
| 14 | B) 125 A,36KA,FPMCCB |
| 15 | Providingand fixing following capacity TPN disconnectorfuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, makigconnections etc as requried .A) 125A TP & N |
| 16 | Supplying and replacement of following accessories suitable for415 Volt, AC, 50H3, i/c dismantling the existing damaged/burnt out parts & connection testing etc completed as reqd.a)3 polecontractor ML3 type |
| 17 | b) ML3 type relay |
| 18 | c) Electronic timer |
| 19 | Supply & replacement offollowing rating 240/415 V, 10 KA, \"C curve, MCBsuitable for inductive load of following poles in the existing MCB DB complete with connections, testiingand commissiioning etc as required . a) 16 Amp SPN MCB |
| 20 | b) 32 Amp TP MCB |
| 21 | Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required. A) 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 22 | Spray painting of 8 nos. passenger lift car with two coats of synthetic enamel paint of approved colour i/c removing the old paint from rough & rusted of lift car and making smooth surface with painting,filling,rubbing & cleaning etc as required. |
| 23 | Spray painting of 13 nos. passenger lift car with two coats of synthetic enamel paint of approved colour i/c removing the old paint from rough & rusted of lift car and making smooth surface with painting,filling,rubbing & cleaning etc as required. |
| 24 | Refillingand Refixing of Water type Fire extinguishers of capacity 9 Kg complete as required |
| 25 | Refilling and Refixing of Mechanical foam type Fire extinguishers of capacity 9 Kg complete as required |
| 26 | Refilling Refixing of 4.5 kg capacity CO2 gas cylinder with CO2 gas i/c testing etc complete as required. |
| 27 | Supply and Replacement of butterfly valve of PN 1.6 rating with bronze/gunmetal seal duly ISI marked complete with nuts,bolts,washers,gaskets confirming to IS 13095 of following sizes as required:-A) 150 mm dia |
| 28 | Providing, replacement, testing & commissioning of \"C\" classheavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paintof required shade complete as required : a) 100 mm dia. |
| 29 | b) 150 mm dia |
| 30 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. A) 3.5C x 185 sq. mm |
| 31 | Supplying of following size of XLPE insulated / PVC sheathed al. Conductor armourd power cable of 1.1 KV grade i/c making, connection testing etc. as reqd.i) 3.5C x 185sq.mm |
| 32 | Laying of one number PVC insulated and PVC sheathed / XLPEpower cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.(a)Above 95 sq. mm and upto 185 sq. mm |
| 33 | Repairing of 160 KVA DG set panel i/c supply and replacement of following items i/c testing etc complete as required:-a)S/R of display-1 No.b) S/R of starter relay -1 Noc) S/R of AVR-1 Nod) S/R of MVR-1 Noe) S/R of Battery charger-1 Nof)S/R ofsuitable contactor--1 No.g)S/R of 12 V relays--4 Nos |
