Tender For Provision Of Dg Set Along With Amf Panel And Allied Services For Mri Room At Aiims Bibinagar, Telangana
Tender Value
51.79 Lakhs
Estimated cost
Bid Submission
16 Jan 2023
0 days left
EMD
1.55 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bibinagar → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Dg Set Along With Amf Panel And Allied Services For Mri Room At Aiims Bibinagar, Telangana
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil |
| 2 | Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required (excluding reinforcement). |
| 3 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel 12 mm bars as perthe directions of Engineer in-charge. |
| 4 | Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels. |
| 5 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 6 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm). |
| 7 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. |
| 8 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required |
| 9 | Supply of the following size 1.1KV grade with ISI Marked XLPE insulated PVC sheathed, armored Aluminium conductor power cable approved makes and confirming to IS 7098 (part 1) amended up to date. |
| 10 | 3.5 Core x 185 sq.mm |
| 11 | 3.5 Core x 300 sq.mm |
| 12 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade size of 3.5 core x 300 sq mm armoured aluminium conductor cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 13 | Supplying, fixing and making end termination ofwith brass compression gland and aluminium lugs for size of3.5 Core X 300 Sqmm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Set Includes RYBN Lugs with gland |
| 14 | Supplying , fixing and making end termination of with brass compression gland and aluminium lugs for size of3.5 core X 185 sq. mm (57mm) PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Set Includes RYBN Lugs with gland |
| 15 | Supplying and installing following size of perforated Hot Dipped GalvanisedIron cable tray(Galvanisation thickness not less than 50 microns) 300 mm width X 50 mm depth X 1.6 mm thickness with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I.bolts & nuts, etc. as required. |
| 16 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"bends\" (galvanisation not less than 50 microns) 300 mm width X 50 mm depth X 1.6 mm thicknesswith perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. |
| 17 | Supplying and installing following size of perforated Hot Dipped GalvanisedIroncable tray \"Tee\" (galvanisation not less than 50 microns) 300 mm width X 50 mm depth X 1.6 mm thicknesswith perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. |
| 18 | Laying and fixing of one number PVC insulated , PVC sheathed / XLPE power cable of1.1 KV gradesize of 300 Sq mm on cable tray as required. |
| 19 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 20 | 400 A, 35 KA,TPMCCB |
| 21 | 630 A, 50 KA,TPMCCB |
| 22 | Providing and fixing of steel work intubular,(round, square or rectangular hollow tubes etc.) or L- Type Section trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including applyingPaintingwithsyntheticenamelpaintof approved brand and manufacture to give an even shade : Two or more coatsas perthe directions of Engineer in-charge. |
| 23 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 24 | Providing and fixing G.I. chain linkfencing of required width in mesh size 50x50 mm wire of dia 4 mm including strengthening with 4 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 25 | Supply, installation in position, testing,commissioning and handing over of a diesel generator set of minimum capacity of 320KVA, 3 phase, 415 volts, 50Hz (256 KW at 0.8 PF lag) complete with diesel engine, with radiator, (water cooled) along with self starting device,batteries, battery charger, engine panel,base frame, anti-vibration mounts,diesel tank, including necessary accessories to connect AMF Panel and all connected accessories including standard set of tools and sparescomplete as described in detailed technical specifications. |
| 26 | Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for Diesel Generating Set of above 320 kVA upto 500 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specifications |
AI Tender Summary
Tender Timeline
Jan 02, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 16, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender