Tender For Repair And Renovation Of The Head Work Site Pump House (3.65 M X 2.45 M) Size And Boundary Wall At Head Work Site Allied With Additional Works Like Shifting Of Rising Main And Drain Under Augmentation Of Salbari W/S Scheme
Tender Value
9.84 Lakhs
Estimated cost
Bid Submission
19 Jan 2023
0 days left
EMD
19690
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
matigara → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Of The Head Work Site Pump House ( 3.65 M X 2.45 M ) Size And Boundary Wall At Head Work Site Allied With Additional Works Like Shifting Of Rising Main And Drain Under Augmentation Of Salbari W / S Scheme
BOQ
| Sl. No. | Item Description |
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any heightand in any floor including removing rubbish within a lead of 75m as directed. |
| 3 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] ii) With 1:6 cement mortar.20 mm thick plaster |
| 4 | 15 mm thick plaster(1:4) |
| 5 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. |
| 6 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface toreceive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. (In Ground Floor)b) Two Coats. i) Water based interior grade Acrylic Primer |
| 7 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC.In Ground Floor:(b) Two Coats. |
| 8 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) b) Premium 100% Acrylic Emulsion. |
| 9 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification.In Ground floor .(i) One coat on old surface |
| 10 | Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth. |
| 11 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 12 | Ordinary cement concrete( Mix 1:1.5:3 ) with graded stone chips (20mm.) excluding shuttering and reinforcement if any,in ground floor as perrelevant IS codes.(b) River bazree,N.B.Variety. |
| 13 | Reinforcement for reinforced concrete work in all sorts of structures includingistribution bars, stirrups, binders etc initial traightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection,complete as per drawing and direction.II. Other than SAIL/ TATA/RINL |
| 14 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering without staging in foundation. |
| 15 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(c) Sal : Siliguri |
| 16 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor.b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 17 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.75mm. X 60mm. X 3.15mm |
| 18 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)a) 40mm X 6mm, 250mm Length. |
| 19 | Supplying \"Godrej\" mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete |
| 20 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base (Hexagonal/ Round rod)(ii) 100 mm grip x 10 mm dia rod. |
| 21 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(b) 300 mm long. |
| 22 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheicomposite structure as per approved technology of Department of Science and TechnologyDST) to safisfy IS: 4020 door testing performance criteria.(ii) 66mm x 70mm |
| 23 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibrereinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.In ground floo .(ii) 25 mm thick |
| 24 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. |
| 25 | In ground floor 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement.(iii) 35 mm. thick G.F & Roof top floor |
| 26 | Supplying ,fitting and fixing Alloy Iron with brass spindle stop cock /bib cock of approved make and brand spray painted andtested to 21kg. per sq. cm. |
| 27 | ( i ) 15 mm dia.. |
| 28 | Supplying ,fitting and fixing 10 litre P.V.C.low-down cistern conforming to I.S.specification with P.V.C. fitting complete,C.I.brackets including two coats of painting to bracket etc. |
| 29 | Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 .A 6 kg / Sq. Cm working pressure. (Dia) [PE - 63] ForRainwater down pipe.i) 75 mm dia ( External) |
| 30 | Supply fitting,fixing C.I. Speacials of down pipes in position with clamps,nails,etc. with jointing materials including cutting holes in masonary or concrete mending good damages complete. |
| 31 | b) C.I. Bend of down pipes(With door),75 mm dia. |
| 32 | Supplying,fitting and fixing approved brand P.V.C.CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. |
| 33 | (i) 900 mm long |
| 34 | Orissa pattern water closet in white glazed vitreous chinaware of approved make supplied,fittedand fixed in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing. ) |
| 35 | i)580 mmX 440 mm size |
| 36 | Supplying ,fitting ,fixing cast iron\"P\" or \"S\" trap conforming to I.S. 3989/1970 & 1729/1964 including lead colk joints & painting two coats to the exposed surface. |
| 37 | (a)\"S\" trap 100mm dia.With A.S horn. |
| 38 | Priming one coat of timber,plasteredsurface with synthetic enamel / oil bound primer of approved quality including smoothening surface by sand papering etc. |
| 39 | B) Priming one coat on steel and other metalsurface with synthetic enamel/ oil bound primer of approved quality including smooth ening surfaces by sand papering etc. |
| 40 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc, on the surface if necessary: |
| 41 | (a) On steel or other metal surface. |
| 42 | i)Two coats (with any shade except white.) |
| 43 | (b) On timber or plastered surface. |
| 44 | i)Two coats (with any shade except white.) |
| 45 | Supplying, fitting & fixing G.I. pipes of TATAmake with all necessary accessories, specials viz. socket, bend, tee,union,cross,elbo, nipple,long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in allrespectincludingcostof all necessary fittings as required, jointing materialsandtwocoatsof painting with approved paint in any position above ground. (payment will be made onthecenterlinemeasurements of total pipe line including all specials. No separate paymentwill bemadefor accessories, specials). |
| 46 | 15 mm dia. medium quality. |
| 47 | 20 mm dia. medium quality. |
| 48 | Cement concrete with 30 mm down graded shingles excluding shuttering (6:3:1) Proportion. N.B Variety |
| 49 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer.a) 500 litre capacity |
| 50 | Iron socket bolt of approved quality fitted and fixed complete. 100 mmlong 10 mm dia bolt. |
| 51 | Earth work in excavation of foundation trenches or drains, in all sorts of soil(including mixed soil but excluding laterite orsandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 52 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis ofmasurement of finished quantity of work)(a) With earth obtained from excavation of foundation |
| 53 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. In ground floor. |
| 54 | Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensionedand fixed with the vertical M.S angle iron posts by means of security fasteners (such as \"C\" clips, R.B.T clips etc.) |
| 55 | Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid inpattern as directed in pavement, footpath, driveway (paverblock only), etc including necessary underlay complete in allrespect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 60 mm thick interlocking designer concrete paver block M-35 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge. Colour Decorative |
| 56 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge. |
| 57 | Dismantling all type of plain cement concrete works, stacking serviceable materials of site and removing rubbish as directed within a lead of 75 mtr. for laying all dia pipe line in ground floor, upto 150 mm thick. |
| 58 | above 150mm thick |
| 59 | 150mm thick upto |
| 60 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. |
| 61 | Withdrawing of DI/CI pipes / AC pipe after excavation of earth and with the help of chain pully derrick etc. by dismantling of jointing of rubber gasket joint or lead joint or flange joint and stacking the withdrawn pipes and specials at site store /road flank godown etc. all complete as per direction of ElC. NOTE: SHIFTING |
| 62 | i) 80 mm to 125 mm AC/DI/CI Pipe |
| 63 | ii) 150 mm dia to 200 mm AC/DI/CI Pipe |
| 64 | Repairing of flange joint after dismantling the joints, removing the unserviceable rubber insertion and supply new rubber insertion and supply upto 50 % of new nuts and bolts all complete including necessary earth work dewatering & supply of washer etc. all complete as per direction of EIC I) a) 80 mm dia. to 100 mm dia. |
| 65 | b) 125 mm dia. to 200 mm dia. |
| 66 | Carrying CI/DI pipes with specials and valves and lowering placing in position and laying carefully inside the trenches in proper alignment and gradient etc. including earth work in excavation of adequate width as per specification having min. clear cover from top of pipe is 1.10mtr. below existing ground level in any kind of soil including mixed with boulder, road sub grade and its flank, but excluding moorum and laterite and stone etc.without damaging the exisiting telephone/electric cable etc.(in case of damaged if any type of cable line during excecution, necessary damaged charges as applicable by the respective authority will be borne by the agency in his own cost) preparing the bottom surface for continuous bedding of pipe line and laying pipes, fitting, fixing specials and valves with bailing out water if any including carriage of pipes, specials and valves from local deptt. store within 8KM and back filling the trenches with excavated earth in layers to original condition as per specification and direction of EIC. The surplus materials after execution of work are to be return to the deptt. store. 100mm dia. |
| 67 | 150 mm dia. |
| 68 | 200mm dia. |
| 69 | M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows, railing etc fitted and fixed with necessary screws and lugs in ground floor |
| 70 | (i) Grill weighing above 10 kg. / sq.m. and upto 16 kg. / sq.m. |
| 71 | Add GST 18% |
| 72 | Add CESS 1% |
AI Tender Summary
Tender Timeline
Jan 02, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 19, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender