|
| 1 | Loading unloading & carriage of material from store KESCo to work site. |
| 2 | Loading unloading of H.T. Pole from store to site. |
| 3 | 11 KV XLPE Cabe 3x70 to 3x300 Sqmm |
| 4 | M.S.Channel &Angle |
| 5 | 11 KV St. Th. Joint Box/Indoor/Outdoor Box |
| 6 | Nut and Bolt, M.S.Item, ABC Material, 11 KVA Material, M.S. Item and otherall material. |
| 7 | Cost of Material to be Supplied by Contractor |
| 8 | LT XLPE Cable 1x400 Sqmm |
| 9 | M.S. Earthing Rod 2520x20 mm with earth wire of size 7x16 |
| 10 | 11 KV 3x70 Sqmm outdoor cable box |
| 11 | C.I. Paking 5½\" |
| 12 | G.I. Pipe 6\" Dia |
| 13 | L.T. Armoud XLPE Cable 3½ x70 Sqmm |
| 14 | L.T. Armoud XLPE Cable 3½ x240 Sqmm |
| 15 | Aluminium Cable Armoud 2x10Sqmm |
| 16 | Aluminium Cable Armoud 4x25Sqmm |
| 17 | PVC Pipe 40 mm Dia |
| 18 | PVC Pipe 50 mm Dia |
| 19 | Distribution Box of Size 450x400 Sqmm with bus bar 100 Amp. C.Type Pannel |
| 20 | Supply of outdoor type feeder piller panel to be made of 2mm CRCA sheet & Covers will be 1.6 mm CRCA sheet duly power paint including suaitable foundation with 400 amp. Aluminim Bus bar (Type B-1 Incomer 250 amp TP MCCB 1 no. outgoing 63 amp. TP MCCB 6 No.) |
| 21 | Cable end termination using Total double compersation brass gland and climping type almunium thimble 3.5x70 Sqmm XLPE Cable. |
| 22 | Cable end termination using Total double compersation brass gland and climping type almunium thimble 3.5x240 Sqmm XLPE Cable. |
| 23 | Danger Board |
| 24 | Erection of Material |
| 25 | Construction of T/F plinth, suitable for mounting of distribution transformer size of the plinth will be 1.2×1.2x1.2 meter solid with brick work. 75mm. Thick C.C. in ratioo 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75mm. Thick done on all the exposed sides to the plinth. |
| 26 | Fabrication and fencing of yard Including cost of M.S. angle size 35×35×5 and M.S. flat size 30×5, fixing of welded steel wire fabric on steel frams by welding of 10 SWG wire fabric, including Painting of two coats of paint on iron based surfaces with ready mixed Paint to give bus green shade including of oil & dust. |
| 27 | Errection of Double Pole |
| 28 | Grouting of Pole |
| 29 | Painting of double pole structure with one coat of red oxide and two coats of Alm. Paint above fuse set including cost os Ist Class enamel paint. |
| 30 | Making plinth of Double Pole of 450 mm dia x2250x 600mm. Height (200mm underground) with C.C. in ratio 1:4:8 of cement stone ballast and coarse sand including cost of material. |
| 31 | Earthing of Pole |
| 32 | Cost of T/f Earthing of Supply of G.I. Pipe Errection of bore earthing 40 feet deep clamp dia 40 mm. including assessories |
| 33 | Provideing and laying of HDPE 160 mm Pipe with depth of 1.2 to 2.0 Mtr. as per site conditin through HDD Method at road crossing and railway line for laying of cable (HDPE Pipe provided by Contractor) |
| 34 | Laying of HT Cable 3x300 Sqmm. For HDD Method |
| 35 | Laying of 11 KV Cable Via above laid HDPE Pipe through HDD method/manual method. |
| 36 | Digging and Laying of 11 KV Cable 3x370 Sqmm XLPE Cable |
| 37 | Digging of tranch0.06 mtr. to 0.09 mtr. Deep and 0.3 Mtr. wide for laying of L.T. XLPE Cable. |
| 38 | Laying and erection of L.T. 3½x70 and 3 ½x 240 Sqmm. XLPE Cable in above digged trench overing with bricks and sand as per standred specification. |
| 39 | Laying of G.I. Pipe 40mm dia to houses (external area) |
| 40 | Laying of G.I. Pipe 50mm dia to houses (external area) |
| 41 | Laying of under ground PVC Pipe 40 mm dia. |
| 42 | Laying of under ground PVC Pipe 50 mm dia. |
| 43 | Painting of steet structure with two coats of primer and two coadts of enamel paint. |
| 44 | Erection and grouting of B Type Pannels. |
| 45 | Erection and grouting of C Type Pannels. |
| 46 | Making of Cable termination Joint. |
| 47 | Mounting of Cable termination Joint with pipe. |
| 48 | Mounting of Cable termination Joint without pipe. |
| 49 | Digging of tranch and makin St. Th. Joint Box. |
| 50 | Laying of Armoured Cable 2x10 Sqmm. |
| 51 | Laying of Armoured Cable 4x25 Sqmm. |
| 52 | Dismentalling of S.T. Pole. |
| 53 | Dismentalling of ACSR Mixed Conductor. |
| 54 | Dismentalling of AB Cable. |
| 55 | Dismentalling of M.S. Channel, V Type cross arm and M.S. Angle. |
| 56 | Providing and fixing of concrete stone Route marker |
| 57 | Dismantalling/Shifting and errection of existing distribution transformer from existing plinth/D.Pole to newly erected plinth/D. Pole. |
| 58 | Making suitable plinth for ACB for existing distribution transformer at near by newly shifted transformer and shifting and erection of ACB on newly erected ACB plinth. |
| 59 | Connection of Newly constructed HT/LT 11 KV network including testing, commissioning and energisation of the same completely. |
| 60 | Digging of Pit Size 2x2x2 |
| 61 | Febraction and modification of M.S. Item |
