|
| 1 | Teapoy wooden (1.01 to 1.03) :Removing following old unserviceable wooden part and S&F new part made out of 1st class hard wood (Teak wood) size, shape & design as shown on drg . All new surfaces shall be two coatof french polish with high gloss finish.including tightening the joints by pinning, screwing, nailingand placing every part intact all as specified in drg and directed by Engr-in-charge. FD-278, 382 |
| 2 | Leg |
| 3 | Side rail |
| 4 | Front/back rail |
| 5 | Table 3\"x2\" with or without drawer (2.01 to 2.07): Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be painted with two coatof french polish with high gloss finish all as specified in drg and directed by Engr-in-charge. FD-283, 284 |
| 6 | Leg |
| 7 | Front/rear rail |
| 8 | Side rail |
| 9 | Middle stiffeners |
| 10 | Side stiffeners |
| 11 | Bottom ply of drawers (commercial ply woods of size 550mm x 310mm x 6mm). |
| 12 | Side members of drawer |
| 13 | Table4 x 3 (3.01 to 3.03):Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, All new surfaces shall be painted with two coatof french polish with high gloss finish and placing every part intact all as specified in drg and directed by Engr-in-charge. FD/MAP-II/-03 |
| 14 | Front/back rail |
| 15 | Side rail |
| 16 | Leg |
| 17 | Table dining 6 person (4.01 to 4.03):Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing. All new surfaces shall be painted with two coatof french polish with high gloss finish and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-239, 269, 273, FD/Map-II/03 |
| 18 | Front/ back rail |
| 19 | Side rail |
| 20 | Leg |
| 21 | Table dining 8 person (Item No 5.01 to 5.03) :Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-239,FD-273,FD-376 |
| 22 | Front/back rail |
| 23 | Side rail |
| 24 | Leg |
| 25 | Table writing(Item No 6.01 to 6.07) :Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood ) size and shape as per drgincluding tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-249, 275 |
| 26 | Leg |
| 27 | Front/ back rail |
| 28 | Bottom base of box 18mm thick commercial particle board (ISI marked) |
| 29 | Back ply box 6mm thick commercial ply (ISI marked) |
| 30 | Front door 18mm pre-laminated particle board including hinges piano type continuous. |
| 31 | Bottom of drawer 6mm thick commercial ply (ISI marked) of size 600mm x 450mm . |
| 32 | Knobs 50mm of chromium plated of approved coloured and standard quality. |
| 33 | Table 3x3 (7.01 to 7.02) :Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-88M, 291 |
| 34 | Leg |
| 35 | Front/side rail |
| 36 | Table Peg (8.01 to 8.04) :Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.FD-25, 277, 384, 236 |
| 37 | Leg |
| 38 | Front rail |
| 39 | Side rail |
| 40 | PVC Shoes (4 nos in one chair) |
| 41 | Table Centre (9.01 to 9.04) :Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.FD-274, 134(M), 235,267,393 |
| 42 | Leg |
| 43 | Front/rear rail |
| 44 | Side rail |
| 45 | PVC Shoes (4 nos in one chair) |
| 46 | Chair WB (10.01 to 10.07) :Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-285 |
| 47 | Stiffener |
| 48 | Front/Side/ rear rail |
| 49 | Back Support |
| 50 | Front leg |
| 51 | Rear leg |
| 52 | PVC Shoes (4 nos in one chair) |
| 53 | S&F Plywood 6 mm thick BWR grade ISI marked as per drg |
| 54 | Chair Easy with cusioned (11.01 to 11.08) : FD-358 |
| 55 | Taking out unserviceable seatof Chair Easy cusioned and S&F new seat 12mm, teak ply with ploy urethane foam 75mm thick moulded with density 40 Kgs per cum with rexine of approved colour and shade with black pvc beeding including necessary nut bolts and washer. |
| 56 | Taking out unserviceable back of Chair Easy cusioned and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with rexine of approved colour and shade with black pvc beeding including necessary nut bolts and washer. |
| 57 | S&F in repair Stiffener |
| 58 | S&F in repair Front/Side/ rear rail |
| 59 | S&F in repair Back Support |
| 60 | S&F in repair Front leg |
| 61 | S&F in repair Rear leg |
| 62 | S&F in repair PVC Shoes (4 nos in one chair) |
| 63 | Sofa Set (12.01 to 12.06): FD-373, 281Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. |
| 64 | Leg |
| 65 | Side planks of sofa seat |
| 66 | Bottom planks of sofa set |
| 67 | Handle of single seat |
| 68 | Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of \"cool\" foam of 40 density 530 mm x500 mm covered with best quality of tapestry clothMake - Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth shouldnot be less than Rs.250/Mtr |
| 69 | Removing of old unserviceable tapestry cloth from cushion of sofa set and S&F new tapestry cloth and stitched on cushion as shown on drawing.Tapestry cloth shouldnot be less than Rs.250/Mtr |
| 70 | Sofa set Satee type 6\"6\"x1\"6\". (Item No 13.01 to 13.05) (Drawing - TP) |
| 71 | Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of \"cool\" foam of 40 density 1980mm mm x458 mm covered with best quality of tapestry clothMake : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth shouldnot be less than Rs.450/Mtr |
| 72 | Removing u/s Front rail new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. |
| 73 | All as per Item No 13.02 above but back rail |
| 74 | All as per Item No 13.02 above but leg |
| 75 | All as per Item No 13.02 above but Handle of sofa seat |
| 76 | Sofa set sette type 5\"x1\"-6\".(14.01 to 14.05): (TP) |
| 77 | Removing the existing unserviceable cushion and S&F new 100mm thick cushion of \"cool\" foam of 40 density 1524 mm x458 mm covered with best quality of tapestry clothMake : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth shouldnot be less than Rs.450/Mtr |
| 78 | Removing u/s Front rail and S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. |
| 79 | All as per Item No 14.02 above but back rail |
| 80 | All as per Item No 14.02 above but leg |
| 81 | All as per Item No 14.02 above but Handle of single seat |
| 82 | Sofa Set three seater enthic(15.01 to 15.05): TP |
| 83 | Removing the existing unserviceable cushion and S&F new 100mm thick cushion of \"cool\" foam of 40 density 1930 mm x635mm mm covered with best quality of tapestry clothMake : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth shouldnot be less than Rs.450/Mtr |
| 84 | Removing u/s Front rail, S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. |
| 85 | All as per Item No 15.02 above but back rail |
| 86 | All as per Item No 15.02 above but leg |
| 87 | All as per Item No 15.02 above but Handle of single seat |
| 88 | Sofa Set single seater enthic (16.01 to 16.05): TP |
| 89 | Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of U foam of 40 density 711 mm x635mm mm covered with best quality of tapestry clothMake : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth shouldnot be less than Rs.450/Mtr |
| 90 | Removing u/s Front rail, S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. |
| 91 | All as per Item No 16.02 above but back rail |
| 92 | All as per Item No 16.02 above but leg |
| 93 | All as per Item No 16.02 above but Handle of single seat |
| 94 | Sofa Set single seater enthic(17.01 to 17.05): TP |
| 95 | Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of \"cool\" foam of 40 density 1250 mm x635mm mm covered with best quality of tapestry clothMake : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE.Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth shouldnot be less than Rs.450/Mtr |
| 96 | Removing u/s Front rail, S&F new part made out of 1st class hard wood (Teak wood) size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. |
| 97 | All as per Item No 17.02 above but back rail |
| 98 | All as per Item No 17.02 above but leg |
| 99 | All as per Item No 17.02 above but Handle of single seat |
| 100 | Dinning Chair enthic(Item No. 18.01 to 18.03):TP |
| 101 | Removing the existing unserviceable seat cushion and replacing with new100mm thick cushion of U foam of 40 density 460 mm x 460mm mm covered with best quality of tapestry cloth front and backMake : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth shouldnot be less than Rs.450/Mtr |
| 102 | Removing the existing unserviceable back cushion and replacing with new100mm thick cushion of \"cool\" foam of 40 density 710 mm x 510mm mm covered with best quality of tapestry cloth front and back Make : Sleepwell/Kurlon/ MM Foam all as shown on drgs and approved by GE.Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth shouldnot be less than Rs.450/Mtr |
| 103 | S&F in repair leg |
| 104 | Table Bed Side (Item No. 19.01 to 19.03):Removing u/s part and S&F new part made out of 1st class hard wood (Teak wood)and both side pre laminated particle board 18mm thick ISI marked including teak wood edging duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-248,FD-276 |
| 105 | All as per Item No 19 above but Top/ middle/ bottom shelf |
| 106 | All as per Item No 19 above but Sides pane including legs |
| 107 | Side board (Item No. 20.01 to 20.05): Removing following u/s part and S&F new part made out of 1st class hard wood (Teak wood)and both side pre laminated particle board 18mm thick ISI marked including teak wood edging duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. FD-241, 371, 372 |
| 108 | Back side 6mm thick commercial ply wood (ISI marked) |
| 109 | Shutter fixed with piano type hinges continuous 20mm. |
| 110 | Top base |
| 111 | Sides pane including legs |
| 112 | S&F in repair Knobs 50mm of chromium plated of approved coloured and standard quality. |
| 113 | Table dressing (Ladies) :Removing of unserviceable part of furniture and supply and fixing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.5mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent as approved by GE) with 6mm thick ply fixed at back and Teak ply all three side.FD-251,378, |
| 114 | Table dressing (Ladies) :Removing of unserviceable part of furniture and supply and fixing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.5mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent as approved by GE) with 6mm thick ply fixed at back and with MDF Board all three side. FD/E6/MAP/16 |
| 115 | Table dressing gents: All as per item No 21.00 above but Removing existing U/S mirror with plyand S/F new mirror 5.5 mm thick of clear vision (Make : Modiguard, Saint Gobin or equivalent as approved by GE) with 6mm ply on back. FD-230,379 |
| 116 | Polishing description (Item No 24.01 to 24.19) :M&L preparation of wooden surfaces by cleaning, scrapping through electric grinder and smoothing of surfaces with sandpaper and applying one coat of French polish on thewooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing |
| 117 | Teapoy woodenFD-278,382 |
| 118 | Table 3\"x2\" with drawerFD-284 |
| 119 | Table 3\"x2\" without drawerFD-283 |
| 120 | Table dining 4’ x 3’.FD-273 |
| 121 | Table dining 6 person FD-239, 269, 273, FD/Map-II/03 |
| 122 | Table dining 8 personFD-239,FD-273,FD-376 |
| 123 | Table writing FD-249, 275 |
| 124 | Table 3x3 woodenFD-88M, 291 |
| 125 | Table Peg FD-25, 277, 384, 236 |
| 126 | Table Centre FD-274, 134(M), 235,267,393 |
| 127 | Chair WB without armsFD-285 |
| 128 | Table Bed Side woodenFD-248,FD-276 |
| 129 | Side board FD-241, 371, 372 |
| 130 | Bed with plytop |
| 131 | Table dressing (Ladies) FD-251,378, |
| 132 | Table dressing gentsFD-230,379 |
| 133 | Sofa set 5 seater. FD-281, FD-373 |
| 134 | Sofa set 4 seater.FD-281, FD-373 |
| 135 | Dinning Chair enthicDrawing : TP |
| 136 | Replacement of TOP (25.01 to 25.09): Taking out unserviceable top from Tables and S&F new top made out of 18mm thick pre laminated particle board exterior quality including 4mm thick teak wood edging al- around the top duly polished size shall be as shown on drg andas directed. |
| 137 | Teapoy woodenFD-278,382 |
| 138 | Table 3\"x2\" with or without drawerFD-284 |
| 139 | Table dining 4’ x 3’.FD-273 |
| 140 | Table dining 6 person FD-239, 269, 273, FD/Map-II/03 |
| 141 | Table dining 8 person FD-239,FD-273,FD-376 |
| 142 | Table writing FD-249, 275 |
| 143 | Table 3x3 FD-88M, 291 |
| 144 | Table Peg FD-25, 277, 384, 236 |
| 145 | Table Centre FD-274, 134(M), 235,267,393 |
| 146 | Bed with plytop (Item No. 26.01 to 26.06):Removing following unserviceable / broken parts and S&F first class hard wood (Teak wood) new parts complete all as specified and shown on drgs shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. FD-246 & 247 |
| 147 | Head board alongwith the legs |
| 148 | Footboard alongwith the legs |
| 149 | Centre stiffeners |
| 150 | Long rail for following size 35x90x1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles to be provided as directed by Engr-in-Charge |
| 151 | Short rail |
| 152 | Ply wood of size 1950x900x12mm commercial BWR complete all as directed. |
| 153 | S&F‘L’ type bracket of size 75mm x 75mm x 20mm and 2mm thick of Mild steel falt iron fixed with screws complete all as required and directed. |
| 154 | Schedule of Credit |
