Bhakra Beas Management Board-BBMB has published Tender For Replacement Of 3 Nos. 35 Hp Horizontal Motors With Pump And 1 No. 20 Hp Horizontal Motor With Pump In Subsidiary Pumping Station Near Ff Block At Nangal Township. Submission Date for this Tender is 30-01-2023. Motor Work Tenders in nangal Punjab. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dismantling/Removing of 20/35HP Horizontal motors with pump with control pane in all respect. (MR) |
2 | Supply, Erection, Testing andCommissioning of pull back type centrifugal pump confirming to IS-5120/1977with latest amendment if anyhaving discharge of 252 m3/hr.against minimum head of20 mtr. coupled with 35 HP 3 phase electric motor with 1450RPM confirming for IS-325/1976 with latest amendment if any on a common base frame, complete with allaccessories along with control panel. (MR) |
3 | Supply, Erection, Testing andCommissioning of pull back type centrifugal pump confirming to IS-5120/1977with latest amendment if anyhaving discharge of 115 m3/hr against minimum head of 20 mtr. coupled with 20 HP 3 phase electric motor with 1450RPM confirming for IS-325/1976 with latest amendment if any on a common base frame, complete with allaccessories along with control panel. (MR) |
4 | Dismantling concrete (e) Reinforced cement concrete (CSR Item No. 8.6 (e)) |
5 | Reinforced cement concrete M-20mechanically batch mixed using batch typeconcrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth (CSR Item No. 10.15) |
6 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) (CSR Item No. 9.1) |
7 | Steel work fixed independently without connecting plates including cutting hoisting and fixing in position (c) Tees angles & channels (CSR Item No. 18.1 (c.)) |
8 | Nuts & Bolts of all sizes and length required (CSR Item No. 18.15) |
9 | Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete. (CSR Item No. 18.18) |
10 | C.I. Reducer 100 x 150mm 3" (Havey Duty) (MR) |
11 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). B.Class PN-1.6 as per ISI (d) 200mm i/d Sluice Valves flanged (CSR Item No. 28.27 B (d) ) |
12 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). B.Class PN-1.6 as per ISI (e) 250mm i/d Sluice Valves flanged (CSR Item No. 28.27 B (e) ) |
13 | Supply and erection of Switch Disconnector Fuse Unit with HRC Fuses (Suitable for DIN HRC Fuses) in sheet enclosure on the existing surface Confirms to IS 13947 (Part-III), IEC 60947- 3 complete with G.I. Bolts, Nuts & Connections on both sides of switch with suitable size of thimbles, including cost of DIN HRC fuses as per PWD General Specifications:-(iii)SDF TP&N 100Amp., 415volts (With Sheet Enclosure) (CSR Item No. 34.21 B (iii)) |
14 | PVC INSULATED FR COPPER CONDUCTOR CABLES - Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (vi)Overall size 10sq.mm (Un-sheathed) (CSR Item No. 34.09 (vi)) |
15 | P/F of automatic Star-Delta Starter 35 HP (MR) |
16 | P/F of automatic Star-Delta Starter 20 HP (MR) |
17 | Voltmeter 440 volt (MR) |
18 | Amperemeter 200 Ampere (MR) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail