|
| 1 | Supply erection and Commissioning of 6 MLD Horizontal pressure sand Filtration System 2 nos of 3 MLD Independent Filtration System at site including Transportation but Excluding GST with the following 1 HORIZONTAL PRESSURE SAND FILTER 2 ACTIVATED CARBON FILTER 3 MICRON FILTER 4) FILTER MEDIA SAND FILTER FILLING SYSTEM 5) ACTIVATED CORBON FILTER FILLING SYSTEM 6 Pumps Motors 2 nos of 30 HP mono block of Kirloskar Texmo Lubi with ISI mark with starters and electrical calbes for motors from Starters to Pumps etc as directed during execution Detailed specifications are mentioned in the schedule |
| 2 | Cutting open Cement concrete road surface including stacking of excavated materials for pipe line trench work |
| 3 | HIRE CHARGES FOR PLANT AND MACHINARY FOR ROAD AND BRIDGE WORKS Drilling Equipment |
| 4 | Filling of foundations and basement with best river sand in layers of not more than 15 cms thick each well watered to saturation and consolidated including cost and conveyance of all materials incidental charges etc complete. |
| 5 | Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational incidental labour charges such as shoring sheeting planking strutting etc complete for finished item of work. |
| 6 | Construction of Brick Masonry using well burnt Bricks 2nd class or ground moulded Non modular or traditional size 230 x 110 x 70 mm including curing cost and conveyance of all materials as directed during execution and complying with standard specifications etc complete do in CM ( 1: 5) |
| 7 | Plastering in Cement mortar 12 mm thick IN CM 1: 4 using best river sand from approved quarry including cost and conveyance of all materials screening, curing rounding of corners incidental charges as directed during execution complying with standard specifications etc complete |
| 8 | Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20mm HBG crushed metal 0.480 cu.m , 10mm HBG crushed metal 0.320 cu.m , sand 0.400 cu.m and cement 350 kg with water cement ratio of 0.53 (185.5 Lit per cu.m of CC) etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department, but excluding cost of centering, shuttering charges and excluding cost of steel and its fabrication charges, for finished item of work (APSS No. 402) FOUNDATIONS, PLINTH, PEDASTALS (BELOW PLINTH). |
| 9 | Cement Concrete using 40 mm ( 0.54 cu.m), 20mm (0.27cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.- C.C(1:4:8) |
| 10 | Manufacture, Supply, Delivery of OD 125 mm dia PE 100 Grade 10.0 kg/ sqcm HDPE Pipes are conforming to IS 14333 - 2000 for using underground drainage and sewerage systems including transportation to anywhere in A.P excluding all taxes (Supply up to 90 mm drain coil above 90 mm dia. straight length) |
| 11 | Manufacture, Supply, Delivery of HDPE (PE 100 Grade) fittings conforming to IS 4984 - 2016 including transportation to anywhere in A.P. OD 125 mm dia PIPE ENDS LONG NECK |
| 12 | Manufacture, Supply, Delivery of HDPE PE 100 Grade) fittings conforming to IS 4984 - 2016 including transportation to anywhere in A.P. .OD 125 mm dia MS FLANGES |
| 13 | Manufacture, Supply, Delivery of HDPE PE 100 Grade fittings conforming to IS 4984 - 2016 including transportation to anywhere in A.P. ..OD 125 mm dia END CAPS |
| 14 | Manufacture, Supply, Delivery of HDPE (PE 100 Grade) fittings conforming to IS 4984 2016 including transportation to anywhere in A.P. OD 125 mm x 140 mm REDUCERS |
| 15 | Manufacture, Supply, Delivery of HDPE (PE 100 Grade) fittings conforming to IS 4984 2016 including transportation to anywhere in A.P. OD 125 mm dia TEES |
| 16 | Manufacture, Supply, Delivery of HDPE (PE 100 Grade) fittings conforming to IS 4984 2016 including transportation to anywhere in A.P. OD 125 mm dia BENDS |
| 17 | Supply of following G.I. pipes of B class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc and properties and weight as per IS 1239 marked TATA make or equivalent 150 mm dia |
| 18 | Supply of following G.I. pipes of B class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc and properties and weight as per IS 1239 marked (TATA make or equivalent) 80 mm dia |
| 19 | MS FLANGES OD 160 mm |
| 20 | Supply and delivery of Resilient Seated Soft Sealing Gate Valves Sluice Valves with Body and Bonnet of Ductile Iron GGG-40 SG 400 15 or GGG 50 SG 500 7 or Equivalent as per IS1865 IS 3896 2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM Replaceable Spindle Nut without gland packing with 3 O ring protection system on the Shaft and Seals of NBR The Valves should be Vacuum tight and 100 percent leak proof with face to face dimensions as BS 5163 Type A IS 14846 All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside Min 250 Microns RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN 3202F4 BS 5163 Type A Flange drilling as per IS 1538 excluding all taxes duties and transportation PN 1.0 Mpa 200mm dia without bypass |
| 21 | Supply, Delivery of D.I double flanged short Long body or Wafer Type pattern Butterfly Valves for the following dia. conforming to IS 13095 (with up to date amendments, if any) manually operated having Body, Disc with D.I Shaft, Seating ring, internal fastenings with Stainless steel (IS 6603) External bolting with Carbon steel Seat with Nitrite or EPDM rubber excluding transportation and all taxes, complete PN 2.5 MPa 200mm dia |
| 22 | Manufacture as per BIS 12820 89 with S.B.R. Quality Rubber confirming to BIS 5382 85 supply and delivery of Rubber Gaskets suitable for C.I D.I SS pipes anywhere in A.P. F.O.R. Destination departmental stores including cost of material, loading, incidental handling with companies standard packing, transportation, unloading stacking but excluding all taxes. 125mm dia. |
| 23 | SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING TAXES AND CONVEYANCE ETC COMPLETE (1/2 Inch TO 1 Inch |
| 24 | Supply and delivery of rubber packing of 6 mm thick including cost, conveyance and incidental charges and excluding all taxes etc., complete. |
| 25 | Removing the existing cut stone flooring carefully without damage. The stone should be conveyed and stacked as specified by the department as directed during execution. The rate is including labour charges for removing the slab carefully without damage, loading lifting stacking at site etc., complete as directed during execution. |
| 26 | Supply and Fixing of ISI mark 25mm outer dia heavy grade (2.20mm thickness) with IS 9537 part 3 P.V.C. pipe for concealed wiring in walls of brick building duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and for surface wiring on chromium plated metallic base saddles on ceiling of roof existing brick building walls, columns, beams, roofs / trusses / channel etc and masonry work for light, fan and separate plug point including all labour charges etc complete. Makes Sudhakar / Finolex / Polycab / Kumar / AKG / Indian tubes / GM / Anchor / Nandi / Polyline / Gold Medal |
| 27 | Supply and fixing of fabricated M.S clamps made out of various sizes of (25mm x 3mm, 25mm x 6mm etc.) MS flat with necessary holes on either side with suitable MS bolts and nuts and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of PVC pipes, Conduit pipes etc., on Trusses / Channels etc. including all labour charges etc., complete. |
| 28 | Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing caping with pilot ceiling rose, 6 Amp 1 Way Module Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Non-Residential Buildings.Grade-A Wire Makes: Finolex / RRKabel / Havells / Polycab / L T / KEI Grade A Modular Switch Makes Legrand Arteor / Schneider Zen cello / Gold Medal / GIFA / LandT englaze / Crabtree Murano / Amare / Ducor / GM Four Five |
| 29 | Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete.Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L and T / KEI |
| 30 | Supply and run of 5 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete.Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / Land T / KEI |
| 31 | Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete.Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / LT / KEI |
| 32 | Supply and run of 5 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete.Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / Land T / KEI |
| 33 | Supply and run of 5 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete.Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / LT / KEI |
| 34 | Supply and fixing of 16 / 6 Amps 1 Way Combined 2 Module Modular Socket with Shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / LT englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five |
| 35 | Supply and fixing of 100 W Fan Step Regulator of 2 Module on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete.Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / LT englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five |
| 36 | Supply and fixing of 6 Modular Cover Plate Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete.Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / LT englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five |
| 37 | Supply and fixing of 8 Modular Horizontal / Vertical Cover Plate Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete.Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / LT englaze / Crabtree Murano - Amare - Ducor / GM Four-Five |
| 38 | Supply and fixing of 12 Modular Vertical Cover Plate Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete.Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / LT englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five |
| 39 | Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete. |
| 40 | Fixing of given (9 inches to 24 inches ) Exhaust fan of in wall with necessary connections and masonry work of making hole, finishing etc., complete |
| 41 | Supply and fixing of 4 Way VTPN Distribution board as per IS 8623 IS 13032 IEC 61439 3 with IP 43 protection (Metal door) firmly concealed in the wall with neat plastering etc., complete.Grade-A Make Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello / Seimens / Havells STADx / LT-Newrang / Indoasian (Opti Pro) |
| 42 | Supply and fixing of 4 Way VTPN D.Bs suitable for accomodating 125A / 160A 4 Pole MCCB as incomer and TP/SP MCBs as outgoing with IP-43 protection as per IS 8623 IS 13032 IEC 61439-3. (Metal door) firmly concealed in the wall with neat plastering etc., completed. Excluding Incomer OutgoingsGrade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello / Seimens / Havells STADx / LT-Newrang / Indoasian (Opti Pro) |
| 43 | Supply and fixing of 8 Way VTPN D.Bs suitable for accomodating 125A / 160A 4 Pole MCCB as incomer and TP/SP MCBs as outgoing with IP-43 protection as per IS 8623 IS 13032 IEC 61439-3. (Metal door) firmly concealed in the wall with neat plastering etc., completed. Excluding Incomer OutgoingsGrade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello / Seimens / Havells STADx / LT-Newrang / Indoasian (Opti Pro) |
| 44 | Supply and fixing of 63 Amp FP Isolator as per IEC:60947 Part-III in the existing board and giving necessary connections.Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello / Seimens / Havells STADx / LT- Newrang / Indoasian (Opti pro). |
| 45 | Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity C/ D Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections.Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello / Seimens / Havells STADx / LT- Newrang / Indoasian (Opti pro). |
| 46 | Supply and fixing of 63A / 60A 3 Pole MCCB, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1 and 2 having Breaking Capacity 16KA, with thermal magnetic release in the existing board including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello / Seimens / Havells STADx / LT- Newrang / Indoasian (Opti pro). |
| 47 | Supply and fixing of 250A 3 Pole MCCB, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1and 2 having Breaking Capacity 36/35 KA with thermal magnetic release in the existing board including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello / Seimens / Havells STADx / LT- Newrang / Indoasian (Opti pro). |
| 48 | Supply and fixing of 63A Four Pole,30mA RCCB for earth leakage protection, confirms to IEC:61008 and IS:12640-1 in the existing boards including internal connections and Labour charges etc., complete. Grade-B: Makes: ABB / Standard / Havells-euro II / C S / LT / GM / Goldmedal / Hager / Indoasian. |
| 49 | Supply and transportation of 25 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1.Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex. |
| 50 | Supply and transportation of 50 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1.Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex. |
| 51 | Supply and transportation of 240 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1.Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex. |
| 52 | Laying of U.G cables upto 50 Sq. mm with sand cushion covering the cable with bricks and back filling of Trench including cost and conveyance of materials and labour charges etc., complete. |
| 53 | Laying of U.G cables size from 185 Sq.mm to 400 sq.mm and back filling of trench including labour charges etc., complete. |
| 54 | Supply Laying and Transportation of Outer dia 120mm and inner dia 103.5mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make. |
| 55 | Supply of 50 mm dia G.I. pipes of B class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked .Make: Jindal / Appollo / TATA. |
| 56 | Supply of 100 mm dia G.I. pipes of B class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked.Make: Jindal / Appollo / TATA. |
| 57 | Supply and fixing of 6 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete.Make: Legrand / G.M / LT / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art. |
| 58 | Supply and fixing of 8 or 9 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete.Make: Legrand / G.M / LT / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art. |
| 59 | Supply and fixing of 12 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete.Make: Legrand / G.M / LT / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art. |
| 60 | Providing of Independent Chemical Earthing after excavating an earth pit of size1.5 m X 0.9 m X 2.05 m(Top 1.50 m X 0.90 m X 0.9m and bottom 1.20 m X 0.90 m X 1.15 m) with the following specification (a) Supply of Copper Earth Electrode, 38 mm dia wall thickness 1.60 mm, 2 meter long, inner space of pipe filled with high conductive material along with 1 bag (25Kg to a bag) of Earth Life Compound. Makes: Potential / Shake Hands / Mars / Tirumala / Arshlok earthing.b) The Earth Electrode shall be inserted into the ground for 1.75 Mtrs. Below the inspection chamber bottom 300mm all around this Earth Electrode shall be covered with 25 Kgs. Of Earth Life Compound (c) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water. (d) The top 0.25 m of Earth pipe shall be exposed into inspection chamber of Hume pipe . The all around inspection chamber shall be providied with 18 inches dia hume pipe. Earth connections shall be given to the Earth Elecrods with bolts, nuts washers. (e) A 65 mm dia PVC conduit is to be embeded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound. (f) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards. |
| 61 | Supply and run of 25mm X 6mm G.I Strip for earth electrode to required places by concealing in walls, flooring by cutting the grooves and replastering neatly and giving necessary connection with 3/8 x2 GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete. |
| 62 | Supply and run of 25mm X 6mm G.I Strip for earth electrode to required places by Surface in walls, flooring including cost of all accessories and giving necessary connection with 3/8 x2 GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete. |
| 63 | Supply and run of 25mm X 6mm G.I Strip for earth electrode to required places buried in ground at not less than 0.5 mtrs below the ground level after excavation of trench and filling with 6 sand all around the earth strip and refilling etc., and giving necessary connections with 3/8 x 2 G.I Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete. |
| 64 | Design, Engineering, Manufacturing and Supply of 28W, 1200mm BLDC Ceiling FansSweep:1200mm(48)Rated Voltage:230V,Frequency:48-52Hz,Operating Voltage: 140-290V single phase AC.Power Factor : 0.99 AirDelivery: 230CMMRated Power: 28 W - 30 W,Motor Speed : 350 RPM with speed control,Bearing:Double Ball BearingDown Rod Size: 260 mm,Service Value:8.2 CMM/W,Operating temperature within 2 degree of ambientwarranty:3 years on site,Speed Control:Regulator CompatibleConforming as per IS 374-2019 LatestMakes : Atomberg / Havells / Halonix |
| 65 | Supply of 15 (375mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark. Makes: Crompton / Almounard / Havells Turbo Force/Halonix Krypton |
| 66 | Supply and Fixing of 4 feet T5, 18W LED Batten type fitting with Internal driver with Polycarbonate housing and PC diffuser suitable to operate on 230V AC, 50 Hz power supply as per the following specificationMake: Philips / Osram / Havells / Crompton Greaves / GE / Orkus. Detailed specification given in the BOQ |
| 67 | Design, Fabrication, Supply, Installation, Testing and commissioning of LT Outdoor free standing floor mounted dust and vermin proof compartmentalized cubical panel of size 1750mm(H) X 2050mm (W) X 350mm (D) made out of CRCA sheet, required hardware, duly painted by two coats of Zinc/red oxide primer followed by powder coated/ epoxy/ PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3 mm thickness, separate detachable, gland plate MS base channel, hinged door with locking arrangement for equipment / switchgear. Thickness of sheet shall not be less than 1.6mm upto 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base MS channel if required. Side walls and cable alley compartments having bolted type doors with detachable extensin type structure. Detailed specification given in BOQ |
