Building Construction Department-BCD has published Tender For Proposed Human Resource Development For Emergency Medical Service(Prefabricated Structure) At Sahid Nirmal Mahto Medical College Hospital Dhanbad. Submission Date for this Tender is 06-01-2023. Man Power Supply Tenders in dhanbad Jharkhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 2 | Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l. |
| 3 | Reinforcement cement concrete work in walls ( any thickness ) including attached pilasters buttresses plinth and string courses fillets columns pillars piers aboumentpost and strutsetc above plinth level level up to floor five level excluding cost of centering shuttering finishing and reinfircement 1:15:3 (1 cement : 1.5 coarse sand (Zone lll) : 3 graded stone aggregate 20 mm nominal size) |
| 4 | Reicement concrete work in beams suspended flore foofs having siope up to 15` landings balconies shelves chajja lintels bands plain windowsills staircases and spiral stair cases above plinth level up to floor five level excluding the cost of centering shuttering finishing and reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand ( zone 111) : 3 graded stone aggregate 20 mm nominal size |
| 5 | Providing 35 mm thick precast R.C.C.M -150 with nominal mix of (1:2:4) in shelves with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 with 1.5 mm cement punning at top and side and 6mm cement plaster (1:4) at bottom including screening, curing and placing the slab in position (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l. |
| 6 | Shelevs (Cast in situ) |
| 7 | lintel, beams plinth beams girders bressumers and cantilevers |
| 8 | Columns pillars piers abutment posts and struts |
| 9 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l. |
| 10 | Providing Tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. TMTFe 500 |
| 11 | 8 MM @25% |
| 12 | 10 MM @ 25% |
| 13 | 12 MM @ 25% |
| 14 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.) |
| 15 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 16 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 17 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l. |
| 18 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l. |
| 19 | Providing 12mm, cement lime plaster (1:2:4) ( cement:lime putty:sand) with approved quality of lime and clean coarse sand of F.M. 1.5including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 20 | Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l. |
| 21 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification) |
| 22 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. |
| 23 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 24 | Dismantling R.C.C.work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 25 | Dismantling lime terracing upto average 115 mm depth with chisel and hammer including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 26 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. |
| 27 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm |
| 28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 29 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :150x10 mm |
| 30 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
| 31 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Fixing with adjustable lugs with split end tail to each jamb |
| 32 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm |
| 33 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 34 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 35 | Coupler 110MM |
| 36 | BEND 110MM |
| 37 | SHOE 110MM |
| 38 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110MM |
| 39 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost ofainting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 40 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 41 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : |
| 42 | Ridges plain (500 - 600mm) |
| 43 | Flashings/ Aprons.( Upto 600 mm) |
| 44 | Gutter (600 mm over all girth) |
| 45 | Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge. |
| 46 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 47 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 48 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 49 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 50 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 51 | 4 MM THICK ACP |
| 52 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) sqm 1019.80 21.3.2 With float glass panes |
| 53 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 54 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 55 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-incharge |
| 56 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. |
| 57 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threadedstar headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, ater/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 58 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 59 | Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875-1987, ISO 800-1984 and IS:801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/ STAAD PRO-V8i/ ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/ slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above. |
| 60 | Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on cement board as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately Cement Fiber Board 8 mm thick as per IS 14862:2000 of type B (High pressure Steam Cured) |
| 61 | CARRIAGE OF MATERIAL |
| 62 | BRICKS |
| 63 | SAND |
| 64 | CHIPS |
| 65 | providing and fixing male ended 15mm dia brass bib cock of approved quality ( wt. not less than 350gms) with extra socket all complete as per specification and direction of e/i |
| 66 | providing and fixing g.m. non return valve horizontal/vertical type of approved quality as per specification of e/i |
| 67 | horizontal 32mm dia |
| 68 | vertical 25mm dia |
| 69 | providing and fixing 15mm size c.p. brass pillar cock (weight not less than 350 gms) c/i/ body brass spindle pillar cock of approved quality as per specification and direction of e/I C.Ibody brass spindle |
| 70 | cutting chajja or corince for laying g.i /c.p.v.c pipe and restoring the same with R.C.C (1:2:4) brick work in cement mortor (1:4) as per specification and direction of e/i |
| 71 | making holes in wall for laying g.i/c.p.v.c pipe and restoring the same after pipe laying as per specification and direction of e/i |
| 72 | 125 mm thick wall |
| 73 | 250 mm thick wall |
| 74 | Supplying fitting and fixing the following items complete with all with complete job mirror of 6mm thick plate glass bevelled edge mirror including c.p. brass revolving fitting 3mm ply wood board and c.p hinges to fix with mirror 600mmx450mm |
| 75 | glass shelf with c.p. brass rail 450mmx125mm |
| 76 | c.p. brass towel rail 20mm x600 mm withbracket container |
| 77 | c.p. brass soap dish container medium quality with screw and hinges |
| 78 | Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. |
| 79 | with P trap 10.0 ltr low level PVC cistern |
| 80 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthenware urinal of "Hindustan" " Parry" or any other approved I.S.S. make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grms. , 15 mm P.V.C. alkathene pipe 450 mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l. (a) flat back or standing corner (600mmx350mm) |
| 81 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l. |
| 82 | Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes & G.I.pipeand with complete job 20X0.450X0.600 |
| 83 | Labour for laying , fitting and fixing NP2 R.C.C. spun pipe with collars in lines , level and grade with complete job |
| 84 | Supplying materials and labour for construction inspection chamber with complete job with complete job |
| 85 | supplying NP2 R.C.C hume pipe with colour as work site as per firection of e/I 150mm dia |
| 86 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm |
| 87 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 88 | single tee with door 110x110x110mm |
| 89 | single tee without door 110x110x110mm |
| 90 | bend 87.5" - 110mm |
| 91 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : kitchen sink without drain board |
| 92 | 610x460 mm bowl depth 200 mm |
| 93 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 94 | 25 mm nominal dia pipes |
| 95 | 32 mm nominal outer dia pipes |
| 96 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 97 | 15 MM NOMINAL OUTER DIA PIPES |
| 98 | 20 MM NOMINAL OUTER DIA PIPES |
| 99 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 100 | Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia |
| 101 | supplying the following bathroom fittings all complete (VIP) |
| 102 | Angular stop cock (long thread)/2 way bib cock |
| 103 | toilet paper holder |
| 104 | telephone shower with flexible pipe /health façade |
| 105 | "point wiring in PVC conduit, with modular type switch:-"Wiring for light point / exhaust fan point / callbell point with 1.5 sq .mm FRPVC insulated copper conductor single core cable in surface / recessed PVC Conduct, with modular piano type switch, phenolic laminated sheet, suitable size PVC/G.l. box etx. A |
| 106 | Power plug wiring in PVC conduit (2x4 sq.mm):-Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper connductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required. |
| 107 | Circuit / submain Wiring in PVC conduit :-Wiring for Circuit / submain wiring along with the following size PVC /insulated copper conductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required. |
| 108 | 2x2.5 sq mm+1x2.5 sq mm earth wire ( for 5/6A plug point) |
| 109 | 2x2.5 sq mm+1x2.5 sq mm earth wire (for switch board) |
| 110 | 2x6.0 sq mm+1x6.0 sq mm earth wire(for 20 A industrial ) |
| 111 | 4x6.0sq mm+2x6.0 sq mm earth wire( for essential TPN DB) |
| 112 | 4x10sq mm+2x10 sq mm earth wire(for essential TPN DB) |
| 113 | S/F Modullar type switch / socket :-Supplying and fixing following size / modules G.I box along with modular base & cover plate for modular switch in recess etc as required. |
| 114 | 5/6 amps , one way switch( for existing switch board) |
| 115 | 5/6 amps , 3 pin socket outlet(for existing switch board) |
| 116 | S/F Modullar type electronic fan regulator :- Supplying and fixing following size / modules G.I box along with modular base & cover plate for modular switch in recess etc as required. |
| 117 | S/F Modullar type electronic fan regulator :- Supplying and fixing modular blanking plateon the existing modular plate and switch box including connectionsas required. |
| 118 | S/F light plug point with modular type accessories :- Supplying and fixing suitable size G.I boxwith modular plate and cover in front on surface or in recess with including provideng and fixing 3 pin 5/6 amps modular socket out let and 5/6 amps modular type switch in connection painting etc as required. |
| 119 | S/F power plug point with Piano type accessories :- Supplying and fixing suitable size G.Ibox with modulaer plate cover in front on surface or in recessin front including provideng and fixing 6 pin 15/16 amps socket out let and 15/16 amps modulaer switch in connection painting etc as required. |
| 120 | S/F Ceilling rose Supplying and fixing 3 pin 5ams Ceilling rose on the existing junction box/ wooen including connectionetc as required. |
| 121 | ITC fluorescent fitting directly on surface :- Installation testing and commissioning of Pre- wired,fluorescet fitting compact fluorscent fitting of all types complete with all accessories and tube etc. directly on ceilling / wall , including connection with 1.5 sq mm FRPVC insulated copper cond. |
| 122 | ITC ceilling fan :- Installation testing and commissioning of of Ceilling fan including wiring the down rods of standard length (upto 30 cm ) with 1.5sq mm FR PVC insulated copper conductor single core cable etc.as required. |
| 123 | ITC exhaust fan upto 450 mm sweep :- Installation exhaust fan upto 450 mm sweep in the existing opening including making the hole to suit the size of theabove fan making good the damage connection testing commissioningetc.as required. |
| 124 | S/FMCCB in cubical panel board :- Providing and fixing following capacity FOUR POLE MCCB INexisting cubicle panel boardincluding drilling holes in cubicle board making connectionetc. 124A |
| 125 | S/F P.T.MCB DB :-Supplying & fixing following way three pole neutral sheet MCB distriution board 415 volts on surface / recess complete with tinned copper busbar neutral busbar earth bar din bar detachable gland plate interconnection phosphatized powder painted including 6 way ( 4+18),Double door ,Horizontal type |
| 126 | S/F VERTICAL TYPE T.P.MCBDB :-Supplying & fixing following way three pole neutral sheet MCB distriution board 415 volts on surface / recess complete with tinned copper busbar neutral busbar earth bar din bar detachable gland plate interconnection phosphatized powder painted including |
| 127 | 12 WAY DOUBLE DOOR |
| 128 | S/F "C" series MCB :-Supplying & fixing following 240 volts "C" series miniature circuit breaker suitable for inductive loads of folloing poles in the existingMCBDB complete with connection testing and commissioning etc. |
| 129 | 6/32A SINGLE POLE |
| 130 | 40A TPN MCB |
| 131 | 50/63A TPN MCB |
| 132 | S/F 20 amps SPN MCB industrial socket outlet supplying and fixing 20 amps 240 volt SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top along with 20 amps "C" seris SP MCCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket outlet and |
| 133 | Copper earth plate electrode :- Earthing with G.I.eath plate 600mmx600mmx3mm thick including accessories and providing masonary enclosure with coverplate having locking arrangement and watering pipe etcas required. |
| 134 | Salt Charcoal for plate earth electrode :- Extra for using salt and charcoal forG.Ior Copper plate earth electrode as required. |
| 135 | MV Cable laying upto 120 sq mm in ground :- Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1kv grade of size not exceeding 25sq.mm but not exceeding 120 sq mm direct in ground including excavation sand cushioning protective covering and refiffing the trench etc as require |
| 136 | s.i.t.c of floowing rating led street lighting luminarie with pressure die cast housing and toughened glass cover ( ip 66 protrction) in existing pole/pipe for supply voltage 100-270v AC 50hz luminarie shall be confirm to is 10322 part 5 /section 3 and shall be completed with all neccssary accessories as required 45/48w led street light |
| 137 | s.i.t.c of floowing rating reccess/ surface mounted led round/squire shape down light luminarie with pressure die cast housingfor single phase supply voltage luminarie shall be confirm to is 10322 part 18/20w led round down light |
| 138 | supply instalation teasting and commissioning of following size ceiling fan 3 blades confirming to is:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5sq.mm FR pvc insulated copper wire suitable for 230v 50hzsingle phase supply etc complete as required 1200mm (48") ceiling fan |
| 139 | s.i.t.c of floowing rating surface mounted led tube light fitting suitable for 230 v 50 hz single phase supplyetc complete as required 20/22w led tube light |
| 140 | bulk head fitting with 9/10 watt cfl/led |
| 141 | 15/16 watt led bulb |
| 142 | 12" (300mm) metal exaust fan |
| 143 | supply of following size and core PVC/XLPE insulated pvc sheated armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required 3.5cx120 sq.mm |
| 144 | 1.1 KV cable end termination :- Supplying and making indoor cable end terminatin with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.3.5c x 120 sq.mm (45mm) |
| 145 | Add 18 % GST |
| 146 | Add 1% Labour Cess |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
