Tender For Specialized Tools For Central Workshop., Khordha-Odisha

Tender For Specialized Tools For Central Workshop. 1 Toolmaker Vice VICE WIDTH minimum 100 MM 1 No. 2 Cast Iron Box Angle Plates (Standard) 1 No. 3 Cast Iron Angle plate (Standard) 1 No. 4 SS Parallel Block Set (Standard) 1 No. 5 Milling Machine Vice (Plain), Width of jaw: min. 150mm, Opening of Jaws should be 200mm 2 Nos. 6 Milling Machine Vice (Swivel type) Width of jaw min. 150mm, Opening of jaws: 200mm 1 No. 7 Hardened V- Blocks with Clamps, Sizes: 50mmx40mmx40 mm and 75mmx60mmx60 mm 1 No. 8 Vernier Height Gauge 300 mm Vernier Height Gauge; Range: 0-300mm; Resolution: 0.02mm Make: ISO certified brands only 1 No. 9 Surface Plate with Table Cast Iron Surface Plate with Table, Size-1000mm × 630mm × 150mm 1 No. 10 Dividing Head for Milling Machine Semi Universal Dividing Head for Milling Machine Rotary Table T with attachment 1 No. 11 T- BOLT and Hex. MS Washer Faced Nut T- BOLT (Ø12,Ø10) and Hex. Mild Steel Washer Faced Nut 40 Nos. 12 T-NUT and Allen BOLT Size- Ø12, Ø10 40 Nos. 13 Dovetail Cutters-HSS Dovetail Cutters ANGLE: 45°, with dia: Ø12, Ø16, Ø20 1 No. 14 T Slot Cutter-HSS T Slot Cutter DIA 10mm, 12mm, 14mm 1 No. 15 CARBIDE Slot drill (Standard) (Dia- 1 mm to 10 mm) 1 No. 16 Taper shell End mill Holder with HSS Cutter Taper shell End mill Holder ISO 40 / 22 mm with HSS Cutter 1 No. 17 Carbide drill bit set; 1mm to 15 mm Carbide drill bit set; Size Range: 01 mm to 15 mm 1 No. 18 HSS-Drill bit Set (2 mm to 15 mm) with 0.2 mm increment 1 No. 19 Centre Drill, Dia Range: Ø5mm and Ø10 mm (10 numbers from each Dia) 20 Nos. 20 Drill grinding Attachment 1 No. 21 Straight TAP Set with Handle (Metric) Diameter range: 3 mm to 16 mm 3 Nos. 22 TAP EXTRACTOR 3 Nos. 23 BOLT EXTRACTOR 3 Nos. 24 BOX SPANNER set 1 No 25 Lever type dial test indicator 3 Nos. 26 Carbon Steel HAMMER HAMMER (500 gm); Material: Carbon steel 3 Nos. 27 Goose Nose Clamp Length= 125mm - 250mm; Width= 40-70mm; Height= 40mm -80 mm; Material: Standard 6 Nos. 28 Standard Universal Strap Clamp 6 Nos. 29 Standard Nose Clamp Nose Clamp; Sizes- 3inches, 4 inches, 5 inches; Material: Standard; Quantity: 04 No.s from each size 12 Nos. 30 EN8-Step Blocks Pair Step blocks Pair; Material- EN-8 6 Nos. 31 PENETRATING OIL Spray Make: ISO certified brands only 6 Nos. 32 T-Handle Hex Allen Key Set(Metric) Make: ISO certified brands only 2 sets 33 Brass Hammer set with wooden handle (250gm, 500gm, 1 kg); Quantity: 02 No.s each weight (1 set) 1 set 34 CUT-RESISTANT SAFETY GLOVES (Sizes-M, XL); 20 Pair each 40 Nos. 35 Indexable U-drill with inserts for Aluminum and SS; Dia Sizes- Ø10mm, Ø12 mm, Ø14 mm, Ø20 mm; Quantity: 1 Set (10 no.s of inserts from each) 1 set 36 Knurling Tools (Diamond wheel) Material HSS/Carbide, Size: Standard Make: ISO certified brands only 2 Nos. 37 Standard CENTER PUNCH CENTER PUNCH: Material: TOOL STEEL; Size: Standard; 6 length 5 Nos. Partially quoted bids will not be considered for further processi

Refer document

Refer document

Refer document