|
| 1 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing downwith water etc complete all as specified and directed. |
| 2 | M & L for dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 3 | M & L for rendering5mm thick cement plaster in cm (1:3) on ceiling including finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M & L for rendering10mm thick cement plaster in cm (1:6) on fair faces brick or concrete surfaces of wall including finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M & L for rendering15mm thick cement plaster in cm(1:4) on fair faces brick or concrete surfacesusing Liquid water proofing compound of wall including finished even and smooth without using extra cement complete all as specified and directed. (WPC Shall be paid and meassured separately) |
| 6 | Supply only Liquid water proofing compound complete all as specified and directed. (Make:Pidillite/Fosroc) |
| 7 | M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 8 | Material and labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whitening primer on walls complete all as specified and directed. |
| 9 | Material & Labour for preparation of new plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirtresistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of weather proof putty (anti efflorescent/water repellent) putty 1 mm thick wall care putty over new plastered surfacecomplete all as specified and directed. |
| 10 | M&L for preparation of old decorated surface of wallsby washing,rubbing down, stopping including brooming down smoke shoot ,mould moss and efflorescent salts and trading oil greasy spots and applyingone coats of oil bound distemper complete including putty /filler work where ever depressions found in wall of acrylic Emulsion distemperanytint complete all as specified and directed. |
| 11 | M&L for Preparation of old decorated surface of ceiling by brooming down steel wire brushing ,scraping down moulds,efflorescent salts and treading oil greasy spotsand applying one coat of white wash complete all as specified and directed. |
| 12 | Material & Labour for complete removal of existing treatment of walland applying Twocoats of 100% Premium acrylic emulsion exterior weather proof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirtresistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat plaster of paris putty 1 mm thick over newly preparedsurfacecomplete all as specified and directed. |
| 13 | M&L for preparation of oldpainted surface of steel or steel based materials of any description over 10cm width or girth and applying one coats of synthetic enamel paint over a coatcomplete all as specified and directed. |
| 14 | Material and labour preparation of old wooden paintedsurfaces of any descriptionexceeding 10 cm in width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 15 | Hacking out old broken glass (any thickness size quality or description) from metal /wooden/aluminiumframes complete all as specified and directed. |
| 16 | S & F for sheet glass 5.00 mm thick ordinary quality and glazing with oil putty/wooden beading in squares n.exc 0.50sqm in each pane complete all as specified and directed. |
| 17 | S & F for sheet glass 5.00 mm thick ordinary quality and glazing with oil putty/wooden beading in squares exc 0.50sqmin each pane complete all as specified and directed. |
| 18 | S & F in repairs rubber beading 10 mm width 6 mm thick for fixingaluminium glasses complete all as specified and directed. |
| 19 | S & F for 5.00mm thick frosted on one side glass, pin headed type and glazing with oil putty/wooden beading in squares n.exc 0.50sqm in each pane complete all as specified and directed. |
| 20 | S & F Sheet glass 5mm thick (Reflective type) of good quality matched the colour with existing glass glazing with oil putty/wooden beading in square n exc 0.50 sqm in each pane complete all as specified and directed. |
| 21 | S & F Sheet glass 5mm thick (Reflective type) of good quality matched the colour with existing glass glazing with oil putty/wooden beading in squareexc 0.50 sqm in each pane complete all as specified and directed. |
| 22 | Taking down chowkats or frames with shutter not exc1.50 sqm (without taking of shutters from the frame) complete all as specified and directed. |
| 23 | Taking down chowkats of frames with shutter exceeding 1.50 sqm and not exceeding 4 sqm (without taking of shutter from frame)each of any description any type complete all as specified and directed. |
| 24 | Taking down shutters of any descriptionexc 1sqm n exc 2 sqm each complete all as specified and directed. |
| 25 | Taking down shutters of any descriptionn exc 1 Sqm each and refixing in same opening after easing and adjusting complete in aluminium/wooden door shutter complete all as specified and directed. |
| 26 | All as per item No 25 abovebut exc 1 sq. m and n exc 2 sq. m each |
| 27 | Taking down chowkats or frame not exc 1.50 sq. m each complete all as specified and directed. |
| 28 | Taking down chowkats or frameexc 1.50 sq. m but n.exc 4 sqm eachcomplete all as specified and directed. |
| 29 | Supply and fixing powder coated anodised aluminium frame 1.50 mm (minimum thickness of frame) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron complete all as specified complete all as specified and directed. (Note- Glass shall be measured and paid separately) |
| 30 | Supply and fixing powder coated anodised aluminium window and ventilator shutters, fixed, openable/ sliding type without sash bar, aluminium section weighing 0.55 kg/mincluding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.(Note- Glass and wire mesh shall be measured and paid separately) |
| 31 | Supply and fixing powder coated anodised aluminium window and ventilator shutters side hugtype without sash bar, aluminium section weighing 0.55 kg/mincluding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws ,anodised aluminium fittings such as peg stay 150 mm long (1 no)hinges type B-21 100mm long (2 nos) suitable handle (01 no) etc complete all as specified and directed.(Note- Glass and wire mesh shall be measured and paid separately) |
| 32 | S & F Anodised aluminium grill(anodised transparent or dyed to required shade according to IS :1868 with minimum anodic coating of grade AC 15) of approved design/pattern ,with apprved standard section and fixed to existing window frame with CP brass stainless steel screws@200 mm centre to centre,including cutting thr grill to proper opening size for fixing and operation of handle and fixing approved anodised aluminium standardsection around the opening ,complete all as specified and directed. |
| 33 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 34 | S & F factory made solid PVC moulded door shutter with particle board core shutter 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face in frame at site as per specification and drawing complete all as specified and directed. |
| 35 | Supply and fixingbutt hinges 125mm size mediumweight, cold rolled mild steel, and fixed to wooden frames complete all as specified and directed. |
| 36 | Supply and fixing stainless steel Butt hinges 100mm size fixed to PVC framescomplete, complete all as specified and directed. |
| 37 | Supply and fixing 150mm size aluminum handles, cast type anodised complete all as specified and directed. |
| 38 | Supply and fixing Aluminum anodized barrel tower bolt of extruded section150 mm long complete all as specified and directed. |
| 39 | Supply and fixing Aluminum anodized barrel tower bolt of extruded section300 mm long complete all as specified and directed. |
| 40 | S & F infor providing 20mm diastainless steelcurtain rods including necessary brackets fittings etc complete for doors and windows complete all as specified and directed. |
| 41 | S & FRoller blind sun screenand drop size as per window size (Materials 100 % synthetic cloths) with head rail chain.top fix or universal extension brackets that co-ordinates with the roller channel size 38 mm approved complete all as specified and directed. |
| 42 | S & F stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 43 | M & L 2nd classhard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied complete all as specified and directed. |
| 44 | Supply and fixing of 40 mm thick 2nd classhard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 45 | Supply and fixing aluminum alloy, anodized, sliding door bolt of length 300mm with hasp & staple (bolt type) & fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed. |
| 46 | Supply and fixing door closer hydraulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 47 | Cutting holes in brick walls built in cement mortar for inserting hold fasts & making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1, depth of embedded portion of hold fasts or lugs measured from the face of the jamb into the wall exc half brick but n.exc one brick complete all as specified and directed. |
| 48 | S & F 25 x 5 mm flat ironas in hold fast for fix wooden door frame complete all as specified and directed. |
| 49 | Supply and fixing Floor door stopper 150mm long of brass body and with hard drawn steel spring and tongue,fixed in floor complete all as specified and directed. |
| 50 | Material and labour preparation of new wooden surfaces of any descriptionexceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 51 | M & L for Application of ATT post construction at apoints of contact of wood work bychemical emulsion (in oil or kerosenebased solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 52 | Material and labour 18-20 mm thick Granite (of any type) stone machine cut, in skirting, dado, riser, cooking platform etc laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick rendering in cement mortar(1:4) complete all as specified and directed. |
| 53 | Demolition of brick work built in cement mortar or cement lime mortar as in manholes/septic tanks etc complete all as specified and directed. |
| 54 | M & L Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar( 1:6) complete all as specified and directed. |
| 55 | M & L Brickwork with flyash bricks,straight or curved on plan to any radius half brick thick wall,built in Cement mortar (1:6) complete all as specified and directed. |
| 56 | Material & Labour for complete removal of existing treatment of walland applying Twocoats of 100% Premium acrylic emulsion exterior weather proof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirtresistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over newly preparedsurfacecomplete all as specified and directed. |
| 57 | Material & Labour for preparation of new plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirtresistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat ofnew plastered surface complete all as specified and directed. |
| 58 | S & FCONSEC ZAL Super punch barb tape (SRPBT) Aluminium base helix coil with and include necessary GI fixing clips for securing complete all as specified and as directed with following specification:- (i) Dia of coil(unstreched-610 mm (ii)No of circle-51 turns per coil(iii) weight of each coil with hessian pack-8.5kg.(iv) Coverage per coil-8RM (v) Central core wire:-made from 2.6 mm dia GI-H.T.S.S wireas per IS -4454 galvanised as per IS 2629.(vi) Razor Punched tape is CONSEC-ZAL steel comprising of AL base with Zinc alloy @150 gm/m2 conforming to ASTM-729/A-729M with additional primer treatment of Epoxy/Polyurethane & final paint top coat of Caulifieid green shade(BSL 139) by Hot Dipping process. The item also includings supply of 3 Nos of Horizontal ZAL runner wire for fixing of concertina coil including taking down the old unserviceable concertina coil complete all as specified and directed.Note :Only Net weight of coil incorporated at site shall be considered for measurement. |
| 59 | S & F Hand rails, half round or others teel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh ,concentrina coil etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 60 | M&L for PCC 1:2:4 Type B1 20 mm aggregate for fixing angle iron in coping of boundary wall lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 61 | M & L for preparation of new steel suface of any description not otherwise described,over 10 cmwidth or girthand applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed. |
