|
| 1 | Demolition of brick work/precast concrete article built incement mortar any description all as directed. |
| 2 | Brick work with sub class \"B\" bricks, straight or curved on plan exceeding 6 metre mean radius, using old size bricks, built in cement mortar 1:6 , complete all as specified andas directed. . |
| 3 | All as per item No. above herein before, but except bricks. Note-Old bricks obtained against dismantling shall be used. |
| 4 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete, all as specified and directed by the Engr-in-charge. |
| 5 | Demolition of cement concrete (un reinforced) in ground floor and paving n/exe 15 cm thickness (below or above ground level)complete all as specified and as directed. |
| 6 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories).complete all as specified andas directed. |
| 7 | Demolition of rerinforced cement concrete of any description and in any position complete all as specified andas directed. |
| 8 | Dismantling of structural steel work in any description complete all as specified and directed. |
| 9 | Dismantling of mild steel barbed wire of any description not otherwise provided for, complete all as specified and as directed. |
| 10 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in mortar complete all as specified andas directed. |
| 11 | Dismantling posts or struts (wood, steel or R.C.C.) embeded in concrete of any section, including taking out embedded portion and making good disturbed ground, complete all as specified and as directed. |
| 12 | Excavation in trenches in hard/dense soil not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or for shafts, manholes, pier holes etc n.exc 10 sqm on plan and not exc 1.50m in depth and getting out inany type of soil, complete all as specified and directed by the Engr-in-charge. |
| 13 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge |
| 14 | Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting pointturning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge |
| 15 | M&L for 15 mm thick rendring in two layer (10mm + 5mm) on fair faces of brick concrete on wall including facia chhajja etc. Surfaces in cement mortar 1:4 and finished even and smooth without using extra cemet, complete all as specified and as directed by Engr-in-charge. |
| 16 | M&L for two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered of wall. |
| 17 | Demolition and breaking up drain pipes AC/ RCC/SCGW/HDPE DWC Pipe line etc any dia of pipe (upto200 mm dia) |
| 18 | M&L HDPE DWC (Double wall corrugated) pipes confirming to IS-16098 of 170 mm internal dia pressure ratting SN--08 fixed with rubber seal and coupler required with and including suitable bends 90/60/45 degree etc single Y Jn complete as required fixed as per manufactures instructions laid in trenches for sewage line including demolition/dismantling of any type of sewage pipe line completeall as specified. |
| 19 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamps, all as specified and directed by the Engr-in-charge. |
| 20 | do but refixing only (except pipe) with clamp complete. |
| 21 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floorsall as specified and directed by the Engr-in-charge. |
| 22 | S&F110 mm bore PVC (SWR) bends with access door any radius,all as specified and directed by the Engr-in-charge. |
| 23 | M&L for75mm thick PCC 1:4:8 type D1 (using 20mm graded stone aggregate) as in Sub base complete all as specified and directed. |
| 24 | M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified andas directed. |
| 25 | Providing cement cncrete 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in coping incl necessary formwork, complete all as specified. |
| 26 | Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels encl necessary formwork complete all as specified and as directed by Engr-in-charge. |
| 27 | Plain cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate as in coping etc including weathering, slightly rounded or chamfered and trading as directed by Engr-in-Charge complete all as specified and directed. |
| 28 | M & L for Plain cement concrete as in 1:3:6, type C-1, (using 20mm graded stone aggregates) for kerbing including all necessary formworks finished even & fair, complete all as specified and directed. |
| 29 | Providing precast cement concrete 1:2:4 in road side kerb stone etc (of any section indicated) with plain fair faces, including chamfers, weathering, throating etc and setting in cement mortar 1:4 complete with joints to match as directed by Engr-in-Charge. |
| 30 | Precast RCC(1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in manhole/Drain covers including necessary formwork required including setting in cement mortar (1:4), complete, all as specified and as direced. |
| 31 | M&L Mild steel TMT bars8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed by Engr-in-Charge |
| 32 | TMT mild steel bars, 6-8mm dia and over, as in reeinforcement cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed not less than 0.9mm dia), complete all as specified and as directed by Engr-in-Charge. |
| 33 | S & F factory made, heavy duty full body digital, paving coloured tiles (Reflective) of size 300 x 300 x 10mm thick for external use laid over and including 15mm thick screed bed or bedding layer in CM (1:4) including jointed with neat cement slurryand pointed in coloured tile grout to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge.Make :- Durastone of somany or equivalent in Bell/Nitco/Johnson/AGL/pavings of kajaria. |
| 34 | M&L Walling of random rubble, uncursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed by the Engr-in-charge. |
| 35 | All as per Srl No. above here n before but except stone. |
| 36 | M&L Flush pointing to random rubble, uncoursed on brought upto course on masonry or concrete block walling in cement mortar 1:4 complete all as specified and as directed by the Engr-in-charge. |
| 37 | M & L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 38 | Machine pressed rubber moulded manufactured/compacted by vibrating table method pre-cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand complete all as specified and directed. |
| 39 | All as per Srl No. above here n before but except tiles, complete all as specified and as directed. |
| 40 | Mild steel framed work for grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 41 | Mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 42 | Excavating in post holes (or similar holes) as in hard/dence soil each n exc 0.5 cu. m, getting out, complete all as specified and directed. |
| 43 | Supply only GI wire 3mm dia, cut to length bent to shape required including cranking bending spirally for hooping for securing wire links at (Top & bottom), complete all as specified and directed. |
| 44 | Supply only chain link fencing galvanised mild steel wires 3mm dia mesh size not less than 50mm x 50mm , including provision of MS binding wires or fixing with nut and bolts with angle iron post complete all as per directions of Engr-in-charge. |
| 45 | Fixing only chain link fencing including line wires wearing alternate mesh, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 46 | Mild steel bolts, purpose made, with hexagonal or square head at one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30 cm long and dia of neck exceeding 12 but not exceeding 20mm complete. |
| 47 | Preparation of new or previously untreated steelsurface of any description exc 10cm with or girth an applying two coats of synthetic enamel paint over a coat of red oxideprimer complete all as specified and directed. |
| 48 | All as per item above but n. exc. 10cm in width, complete all as specified and as directed. |
| 49 | Preparation of new concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed. |
| 50 | Preparation of old concrete surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 51 | Preparation of plastered or un-plastered surface old decorative and washing down, brooming down or steel wire brushing, etc and applying one coats of cement base paint on walls, complete, all as specified and directed. |
| 52 | Preparation of plastered or un-plastered surface old decorative and washing down, brooming down or steel wire brushing, etc and applying one coats of first quality exterior grade wheather proofing acrylic emulsionpaint on walls, complete, all as specified and directed. |
| 53 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction ofEngr-in-Charge. |