Rate Contract Of Power Pump Spare Parts Etc For The Year 2022-2023
Tender Overview
Project Description
Rate Contract Of Power Pump Spare Parts Etc For The Year 2022-2023-2 A 1 ) India Mark -2 & 3 Hand Pump Repairing Drive Out Thepipe Line With Diameter Of 65.0 M.M. 3 A 1 ) India Mark -2 & 3 Hand Pump Repairing Drive Outthepipe Line With Diameter Of 65.0 M.M Which Fell In Borewell. 4 A 1 ) India Mark -2 & 3 Hand Pump Repairing Drive Out Thepipe Line With Diameter Of 32.0 M.M From Whichfell In Borewell. 5 A 1 ) India Mark -2 & 3 Hand Pump Repairing Drive Out Thepipe Line With Diameter Of 32.0 M.M From In Borewell. 6 B ) 1 ) Repairing Of Jet Motor Pump & Pipelinedrive Out Inner Pipeline With Jet Assembly Of Jetpump From 1.0 Hp To 5.0 Hp In Borewell. 7 B ) 1 ) Repairing Of Jet Motor Pump & Pipelineto Fit The Inner And Outer Pipeline Of The Jet Pump In 1.0 Hp To5.0 Hp In Borewell. 8 B ) 1 ) Repairing Of Jet Motor Pump & Pipeline To Insert Inner Pipeline Of Jetpump In Borewell. ( After Repairing. ) 9 B ) 1 ) Repairing Of Jet Motor Pump & Pipeline To Insert Inner & Outer Pipeline Of Jetpump In Borewell. ( After Repairing. ) 10 B ) 1 ) Repairing Of Jet Motor Pump & Pipelineto Pull Out The Stucked, Fell Or Caught In Dreg Pump Set. ( Contracter Use Their Own Tools. ) 11 B ) 1 ) Repairing Of Jet Motor Pump & Pipelineto Increse Or Reduse The Pipe Line Of Jet Pump Inh Well. ( For Every 3.0 M. ) 12 B ) 1 ) Repairing Of Jet Motor Pump & Pipelineto Submit In The Officejet Pump, Motor Pipeline, Starter Panel Board Tin & Other Assesaries Of Laghu Panee Purwatha Yojna In Well. 13 B ) 1 ) Repairing Of Jet Motor Pump & Pipeline New Pump Set ( Upto 1.0 To 5.0 Hp ) To Fit In Well, To Give Panel Wiring Arthig Test Report & Start After Electric Supply. ( Z.P. Providespumpset Panel, Arthing Material G.I. Wire, Plate, Pipe Andother Assesaries. ) 14 B ) 1 ) Repairing Of Jet Motor Pump & Pipelinea ) To Drive Out Motor And Pump From Jet Pump 15 B ) 1 ) Repairing Of Jet Motor Pump & Pipelineb ) To Fit1.0 Hp To 5.0 Hp Jet Motor Pump. 16 B ) 1 ) Repairing Of Jet Motor Pump & Pipeline To Rewinding Electric Motor With Copper Wire , Above Rate Valid Forwithout Returning Old Copper Wire, 1.0 Hp To 5.0 Hp Open Pump Motor Rewinding. 17 B ) 1 ) Repairing Of Jet Motor Pump & Pipelineto Open The Jet Motor, Over Oiling, Fitting And Testing 18 B ) 1 ) Repairing Of Jet Motor Pump & Pipeline Rotor Pump Shaft Turning And Polishing. 19 B ) 1 ) Repairing Of Jet Motor Pump & Pipelineto Make Upper And Lower Bush Of Baring Cover Sit And Housing Of Jet Pump. 20 B ) 1 ) Repairing Of Jet Motor Pump & Pipelineto Test Electric Pump On Site ( Transport And With Minor Repairing ) 21 B ) 1 ) Repairing Of Jet Motor Pump & Pipelineto Repaire Panel Board & Starter Of All Types Motor & Any Hp Control Panel Starter Minor Repairing To Fit Grif Set, Rottery Swich, Contracter Plate, Ampear Meter, Volt Meter, On-Off Switch, Fuse And Minor Wiring. 22 B ) 1 ) Repairing Of Jet Motor Pump & Pipelinestarter Panel Board Main Repairing & To Fit Coilrelay, Single Phasing Preventer Water Label Guard & Totle Wiring Of 1.0 Hp To 10.0 Hp Pump. 23 B ) 1 ) Repairing Of Jet Motor Pump & Pipelinestarter Panel Board Main Repairing & To Fit Coilrelay, Single Phasingpreventer Water Label Guard & Totle Wiring Of 10.0 Hp To 30 Hp Pump. 24 B ) 1 ) Repairing Of Jet Motor Pump & Pipeline Starter Panel Board Main Repairing & To Fit Coilrelay, Single Phasing Preventer Water Label Guard & Totle Wiring Of 31.0 Hp To 40 Hp Pump. 25 B ) 1 ) Repairing Of Jet Motor Pump & Pipelineto Remove Tin Shed Flashing Of Pump If Necessary And Fit As It Is After Work. 26 B ) 1 ) Repairing Of Jet Motor Pump & Pipeline To Remove Handpump With Pipeline For Flashing And Insert 10 Feet G.I.Pipeline Towards 32 M.M. Dimeter& Remove After Flashing And Fithandpump As It Is Before. 27 B ) 1 ) Repairing Of Jet Motor Pump & Pipeline To Remove Handpump For Capacity Test And After Testing Fit As It Is Before. 28 B ) 1 ) Repairing Of Jet Motor Pump & Pipeline Single Phase 1 Hp To 2 Hp Electric Pump Capacity Test For Regular Three Hour With The Help Of Generator. 29 C ) Spare Parts Of Jet Pumpbearing Upper 30 C ) Spare Parts Of Jet Pumpbearing Lower 31 C ) Spare Parts Of Jet Pumpimpeller Key 32 C ) Spare Parts Of Jet Pump Pump Bush 33 C ) Spare Parts Of Jet Pump Air Fan ( With Pvc Pin ) 34 C ) Spare Parts Of Jet Pumpstand Nut Kit 35 C ) Spare Parts Of Jet Pump Nut Bolt Kit 36 C ) Spare Parts Of Jet Pump Air Cock 37 C ) Spare Parts Of Jet Pump Pressure Regulating Volve 38 C ) Spare Parts Of Jet Pump Pressure Regulating Difrom 39 C ) Spare Parts Of Jet Pumpbearing Plate Top / Bottom 40 C ) Spare Parts Of Jet Pumpjet Assembly Packer Type Full 41 C ) Spare Parts Of Jet Pumppacker Foot Volve 42 C ) Spare Parts Of Jet Pumppacker Rubber Seal Set 43 C ) Spare Parts Of Jet Pump Packer Bucket Set 44 C ) Spare Parts Of Jet Pump Gland Rope 45 C ) Spare Parts Of Jet Pump Rubber Packing Set 46 C ) Spare Parts Of Jet Pump Gland Rope Plate 47 C ) Spare Parts Of Jet Pump Impeller 48 D ) Other Material 1 ) G. I. Coplling Heavy Duty 49 D ) Other Materiali ) 32 M.M. 50 D ) Other Materialii ) 40 M.M. 51 D ) Other Material Iii ) 50 M.M. 52 D ) Other Materialiv ) 65 M.M. 53 D ) Other Materialv ) 75 M.M. 54 D ) Other Materialvi ) 100 M.M. 55 D ) Other Materialvii ) 125 M.M. 56 D ) Other Materialviii ) 150 M.M. 57 D ) Other Material 2 ) Bend Heavy Duty 58 D ) Other Material I ) 32 M.M. 59 D ) Other Material Ii ) 40 M.M. 60 D ) Other Material Iii ) 50 M.M. 61 D ) Other Material Iv ) 65 M.M. 62 D ) Other Material V ) 75 M.M. 63 D ) Other Materialvi ) 100 M.M. 64 D ) Other Material Vii ) 125 M.M. 65 D ) Other Material Viii ) 150 M.M. 66 D ) Other Material 3 ) Foot Volve 67 D ) Other Material I ) 32 M.M. 68 D ) Other Materialii ) 40 M.M. 69 D ) Other Materialiii ) 50 M.M. 70 D ) Other Material Iv ) 65 M.M. 71 D ) Other Material V ) 75 M.M. 72 D ) Other Material Vi ) 100 M.M. 73 D ) Other Materialvii ) 125 M.M. 74 D ) Other Material Viii ) 150 M.M. 75 D ) Other Material 4 ) Wooden Board 3 X 2 F X ½ “ 76 D ) Other Material 5 ) Iron Box 18 Guage Tin 3F X 2F X 1F 77 D ) Other Material 6 ) G.I.Pipe 1½“ / 1¼ “ Cutting Threding 78 D ) Other Material 7 ) G.I.Pipe 2“ Cutting Threding 79 D ) Other Material 8 ) G.I.Pipe 2½“ / 3 “ Cutting Threding 80 E ) Submersible Pump Repairing Motor Rewinding With Copper Wire Aove Rate Mension Without Returned Old Copper Wire1.0 Hp To 3.5 Hp 81 E ) Submersible Pump Repairing Motor Rewinding With Copper Wire Aove Rate Mension Without Returned Old Copper Wire 4.0 Hp To 5.0 Hp 82 E ) Submersible Pump Repairing Motor Rewinding With Copper Wire Aove Rate Mension Without Returned Old Copper Wire 6.0 Hp To 10.0 Hp 83 E ) Submersible Pump Repairing Motor Rewinding With Copper Wire Aove Rate Mension Without Returned Old Copper Wire 11.0 Hp To 15.0 Hp 84 E ) Submersible Pump Repairing Motor Rewinding With Copper Wire Aove Rate Mension Without Returned Old Copper Wire 16.0 Hp To 20.0 Hp 85 E ) Submersible Pump Repairing Motor Rewinding With Copper Wire Aove Rate Mension Without Returned Old Copper Wire 21.0 Hp To 30.0 Hp 86 E ) Submersible Pump Repairing Motor Rewinding With Copper Wire Aove Rate Mension Without Returned Old Copper Wire 31.0 Hp To 50.0 Hp 87 E ) Submersible Pump Repairing Motor Rewinding With Copper Wire Aove Rate Mension Without Returned Old Copper Wire 51.0 Hp To 70.0 Hp 88 E ) Submersible Pump Repairing Motor Rewinding With Copper Wire Aove Rate Mension Without Returned Old Copper Wire 71.0 Hp To 90.0 Hp 89 F ) To Remove Motor Pump Set With Pipelinefrom Well1 Hp To 6.0 Hp 90 F ) To Remove Motor Pump Set With Pipelinefrom Well 7.0 Hp To 15 Hp 91 F ) To Remove Motor Pump Set With Pipelinefrom Well16.0 Hp To 30.0 Hp 92 F ) To Remove Motor Pump Set With Pipelinefrom Well31.0 Hp To 50.0 Hp 93 F ) To Remove Motor Pump Set With Pipelinefrom Well 51.0 Hp To 70.0 Hp 94 F ) To Remove Motor Pump Set With Pipelinefrom Well71.0 Hp To 90.0 Hp 95 G ) To Pull Out The Stucked, Fell Or Caught In Dreg Pump Set With Pipelinefrom Well 1 Hp To 6.0 Hp 96 G ) To Pull Out The Stucked, Fell Or Caught In Dreg Pump Set With Pipelinefrom Well7.0 Hp To 15 Hp 97 G ) To Pull Out The Stucked, Fell Or Caught In Dreg Pump Set With Pipelinefrom Well 16.0 Hp To 30.0 Hp 98 G ) To Pull Out The Stucked, Fell Or Caught In Dreg Pump Set With Pipelinefrom Well 31.0 Hp To 50.0 Hp 99 G ) To Pull Out The Stucked, Fell Or Caught In Dreg Pump Set With Pipelinefrom Well51.0 Hp To 70.0 Hp 100 G ) To Pull Out The Stucked, Fell Or Caught In Dreg Pump Set With Pipelinefrom Well 71.0 Hp To 90.0 Hp 101 H ) To Fit Motor Pump In Well With Pipe Line 1 Hp To 6.0 Hp 102 H ) To Fit Motor Pump In Well With Pipe Line 7.0 Hp To 15 Hp 103 H ) To Fit Motor Pump In Well With Pipe Line16.0 Hp To 30.0 Hp 104 H ) To Fit Motor Pump In Well With Pipe Line 31.0 Hp To 50.0 Hp 105 H ) To Fit Motor Pump In Well With Pipe Line 51.0 Hp To 70. Hp 106 H ) To Fit Motor Pump In Well With Pipe Line 71.0 Hp To 90.0 Hp 107 I ) To Increase Or Reduse Pipeline Of Subnercible Pump In Wellrate 3 Meter / Per Pipe1 Hp To 5.0 Hp 108 I ) To Increase Or Reduse Pipeline Of Subnercible Pump In Wellrate 3 Meter / Per Pipe6.0 Hp To 15 Hp 109 I ) To Increase Or Reduse Pipeline Of Subnercible Pump In Wellrate 3 Meter / Per Pipe 16.0 Hp To 30.0 Hp 110 I ) To Increase Or Reduse Pipeline Of Subnercible Pump In Wellrate 3 Meter / Per Pipe31.0 Hp To 50.0 Hp 111 I ) To Increase Or Reduse Pipeline Of Subnercible Pump In Wellrate 3 Meter / Per Pipe51.0 Hp To 70.0 Hp 112 I ) To Increase Or Reduse Pipeline Of Subnercible Pump In Wellrate 3 Meter / Per Pipe 71.0 Hp To 90.0 Hp 113 J ) To Submit In The Officejet Pump, Motor Pipeline, Starter Panel Board Tin & Other Assesaries Of Laghu Panee Purwatha Yojna In Well1 Hp To 7.5 Hp 114 J ) To Submit In The Officejet Pump, Motor Pipeline, Starter Panel Board Tin & Other Assesaries Of Laghu Panee Purwatha Yojna In Well 8.5 Hp To 15 Hp 115 J ) To Submit In The Officejet Pump, Motor Pipeline, Starter Panel Board Tin & Other Assesaries Of Laghu Panee Purwatha Yojna In Well 16.0 Hp To 30.0 Hp 116 J ) To Submit In The Officejet Pump, Motor Pipeline, Starter Panel Board Tin & Other Assesaries Of Laghu Panee Purwatha Yojna In Well31.0 Hp To 50. Hp 117 J ) To Submit In The Officejet Pump, Motor Pipeline, Starter Panel Board Tin & Other Assesaries Of Laghu Panee Purwatha Yojna In Well 51.0 Hp To 70. Hp 118 J ) To Submit In The Officejet Pump, Motor Pipeline, Starter Panel Board Tin & Other Assesaries Of Laghu Panee Purwatha Yojna In Well 71.0 Hp To 90.0 Hp 119 K ) New Pump Set ( Upto 1.0 To 5.0 Hp ) To Fit In Well, To Give Panel Wiring Arthig Test Report & Start After Electric Supply. ( Z.P. Provides Pumpset Panel, Arthing Material G.I. Wire, Plate, Pipe And Other Assesaries. ) 1 Hp To 7.5 Hp 120 K ) New Pump Set ( Upto 1.0 To 5.0 Hp ) To Fit In Well, To Give Panel Wiring Arthig Test Report & Start After Electric Supply. ( Z.P. Provides Pumpset Panel, Arthing Material G.I. Wire, Plate, Pipe And Other Assesaries. ) 8.5 Hp To 15 Hp 121 K ) New Pump Set ( Upto 1.0 To 5.0 Hp ) To Fit In Well, To Give Panel Wiring Arthig Test Report & Start After Electric Supply. ( Z.P. Provides Pumpset Panel, Arthing Material G.I. Wire, Plate, Pipe And Other Assesaries. ) 16.0 Hp To 30.0 Hp 122 K ) New Pump Set ( Upto 1.0 To 5.0 Hp ) To Fit In Well, To Give Panel Wiring Arthig Test Report & Start After Electric Supply. ( Z.P. Provides Pumpset Panel, Arthing Material G.I. Wire, Plate, Pipe And Other Assesaries. ) 31 Hp To 50. Hp 123 K ) New Pump Set ( Upto 1.0 To 5.0 Hp ) To Fit In Well, To Give Panel Wiring Arthig Test Report & Start After Electric Supply. ( Z.P. Provides Pumpset Panel, Arthing Material G.I. Wire, Plate, Pipe And Other Assesaries. ) 51.0 Hp To 70.0 Hp 124 K ) New Pump Set ( Upto 1.0 To 5.0 Hp ) To Fit In Well, To Give Panel Wiring Arthig Test Report & Start After Electric Supply. ( Z.P. Provides Pumpset Panel, Arthing Material G.I. Wire, Plate, Pipe And Other Assesaries. ) 71.0 Hp To 90.0 Hp 125 L ) To Open Sub Motor, Repairing, Fitting And Testing. 1 Hp To 7.5 Hp 126 L ) To Open Sub Motor, Repairing, Fitting And Testing. 8.5 Hp To 15 Hp 127 L ) To Open Sub Motor, Repairing, Fitting And Testing. 16.0 Hp To 30.0 Hp 128 L ) To Open Sub Motor, Repairing, Fitting And Testing. 31.0 Hp To 50.0 Hp 129 L ) To Open Sub Motor, Repairing, Fitting And Testing. 51.0 Hp To 70.0 Hp 130 L ) To Open Sub Motor, Repairing, Fitting And Testing. 71.0 Hp To 90.0 Hp 131 M ) To Open Sub Pump, Repairing, Fitting And Testing.1 Hp To 7.5 Hp 132 M ) To Open Sub Pump, Repairing, Fitting And Testing. 8.5 Hp To 15 Hp 133 M ) To Open Sub Pump, Repairing, Fitting And Testing. 16.0 Hp To 30.0 Hp 134 M ) To Open Sub Pump, Repairing, Fitting And Testing.31.0 Hp To 50.0 Hp 135 M ) To Open Sub Pump, Repairing, Fitting And Testing. 51.0 Hp To 70.0 Hp 136 M ) To Open Sub Pump, Repairing, Fitting And Testing. 71.0 Hp To 90.0 Hp 137 N ) To Repaire Sub Motor And Sub Pumpto Sub Motor / Pump Bush Fitting Per 138 N ) To Repaire Sub Motor And Sub Pumpdamage Stater Repairing 139 N ) To Repaire Sub Motor And Sub Pump Rotor Shaft Turning And Polishing 140 N ) To Repaire Sub Motor And Sub Pump Damage Roter Repairing ( Rewinding ) 141 N ) To Repaire Sub Motor And Sub Pumpsub Pump Shaft Turning & Polishing 142 N ) To Repaire Sub Motor And Sub Pump To Joint Cable With Kit 143 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 I ) Sub Motor Bush 144 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Ii ) Sub Pump Bush 145 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4Thirst Bearing Block 146 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Thirst Bearing Full 147 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4Block 148 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Ring 149 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Upper Stage Casing 150 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Lower Stage Casing 151 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Middle Stage Casing 152 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 I ) Impeller 153 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Ii ) Brass Impeller 154 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Neckring 155 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Defuser 156 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Pump Key 157 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Rubber Parts Kit 158 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Submotor Base 159 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Stenner 160 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Male- Female Bush 161 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Male- Famale Key 162 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Nrv Stage Casing 163 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Stud Big 164 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Hp Stud Small 165 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Motor Bush Housing 166 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 I ) Upper 167 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Ii ) Lower 168 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Alen Screw 169 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Ss Sleevemotor / Pump 170 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Ss Sleeve Cover 171 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 I ) Sub Motor Bush 172 O ) Sub Motor & Sub Pump Spare Parts1 To 5 Hp 4 Ii ) Sub Pump Bush 173 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hpthirst Bearing Block 174 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Thirst Bearing Full 175 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Block 176 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Ring 177 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Upper Stage Casing 178 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Lower Stage Casing 179 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Middle Stage Casing 180 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hpi ) Impeller 181 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hpii ) Brass Impeller 182 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Neckring 183 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Defuser 184 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Pump Key 185 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Rubber Parts Kit 186 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Submotor Base 187 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Stenner 188 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hpmale- Female Bush 189 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Male- Famale Key 190 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Nrv Stage Casing 191 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Stud Big 192 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Stud Small 193 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hpmotor Bush Housing 194 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hpi ) Upper 195 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hpii ) Lower 196 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Alen Screw 197 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hp Ss Sleevemotor / Pump 198 O ) Sub Motor & Sub Pump Spare Parts3 To 7.5 Hpss Sleeve Cover 199 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hpi ) Sub Motor Bush 200 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Ii ) Sub Pump Bush 201 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hpthirst Bearing Block 202 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Thirst Bearing Full 203 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Block 204 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Ring 205 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Upper Stage Casing 206 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Lower Stage Casing 207 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Middle Stage Casing 208 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hpi ) Impeller 209 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hpii ) Brass Impeller 210 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Neckring 211 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Defuser 212 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Pump Key 213 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Rubber Parts Kit 214 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Submotor Base 215 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Stenner 216 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hpmale- Female Bush 217 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Male- Famale Key 218 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Nrv Stage Casing 219 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Stud Big 220 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Stud Small 221 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hpmotor Bush Housing 222 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hpi ) Upper 223 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hpii ) Lower 224 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Alen Screw 225 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hp Ss Sleevemotor / Pump 226 O ) Sub Motor & Sub Pump Spare Parts8 To 15 Hpss Sleeve Cover 227 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hpi ) Sub Motor Bush 228 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Ii ) Sub Pump Bush 229 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hpthirst Bearing Block 230 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Thirst Bearing Full 231 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Block 232 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Ring 233 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Upper Stage Casing 234 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Lower Stage Casing 235 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Middle Stage Casing 236 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hpi ) Impeller 237 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hpii ) Brass Impeller 238 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Neckring 239 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Defuser 240 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Pump Key 241 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Rubber Parts Kit 242 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Submotor Base 243 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Stenner 244 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hpmale- Female Bush 245 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Male- Famale Key 246 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Nrv Stage Casing 247 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Stud Big 248 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Stud Small 249 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hpmotor Bush Housing 250 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hpi ) Upper 251 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hpii ) Lower 252 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Alen Screw 253 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hp Ss Sleevemotor / Pump 254 O ) Sub Motor & Sub Pump Spare Parts16 To30 Hpss Sleeve Cover 255 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hpi ) Sub Motor Bush 256 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Ii ) Sub Pump Bush 257 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hpthirst Bearing Block 258 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Thirst Bearing Full 259 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Block 260 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Ring 261 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Upper Stage Casing 262 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Lower Stage Casing 263 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Middle Stage Casing 264 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hpi ) Impeller 265 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hpii ) Brass Impeller 266 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Neckring 267 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Defuser 268 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Pump Key 269 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Rubber Parts Kit 270 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Submotor Base 271 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Stenner 272 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hpmale- Female Bush 273 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Male- Famale Key 274 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Nrv Stage Casing 275 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Stud Big 276 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Stud Small 277 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hpmotor Bush Housing 278 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hpi ) Upper 279 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hpii ) Lower 280 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Alen Screw 281 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hp Ss Sleevemotor / Pump 282 O ) Sub Motor & Sub Pump Spare Parts31 To 50 Hpss Sleeve Cover 283 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hpi ) Sub Motor Bush 284 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Ii ) Sub Pump Bush 285 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hpthirst Bearing Block 286 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Thirst Bearing Full 287 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Block 288 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Ring 289 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Upper Stage Casing 290 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Lower Stage Casing 291 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Middle Stage Casing 292 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hpi ) Impeller 293 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hpii ) Brass Impeller 294 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Neckring 295 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Defuser 296 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Pump Key 297 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Rubber Parts Kit 298 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Submotor Base 299 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Stenner 300 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hpmale- Female Bush 301 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Male- Famale Key 302 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Nrv Stage Casing 303 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Stud Big 304 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Stud Small 305 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hpmotor Bush Housing 306 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hpi ) Upper 307 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hpii ) Lower 308 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Alen Screw 309 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hp Ss Sleevemotor / Pump 310 O ) Sub Motor & Sub Pump Spare Parts51 To 70 Hpss Sleeve Cover 311 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hpi ) Sub Motor Bush 312 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Ii ) Sub Pump Bush 313 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hpthirst Bearing Block 314 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Thirst Bearing Full 315 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Block 316 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Ring 317 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Upper Stage Casing 318 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Lower Stage Casing 319 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Middle Stage Casing 320 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hpi ) Impeller 321 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hpii ) Brass Impeller 322 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Neckring 323 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Defuser 324 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Pump Key 325 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Rubber Parts Kit 326 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Submotor Base 327 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Stenner 328 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hpmale- Female Bush 329 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Male- Famale Key 330 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Nrv Stage Casing 331 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Stud Big 332 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Stud Small 333 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hpmotor Bush Housing 334 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hpi ) Upper 335 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hpii ) Lower 336 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Alen Screw 337 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hp Ss Sleevemotor / Pump 338 O ) Sub Motor & Sub Pump Spare Parts71 To 90 Hpss Sleeve Cover 339 1 ) Three Ply Coreflat Flexible Submercible Cable I ) 1.5 Sq.M.M. 340 1 ) Three Ply Coreflat Flexible Submercible Cable Ii ) 2.5 Sq.M.M. 341 1 ) Three Ply Coreflat Flexible Submercible Cable Iii ) 4 Sq.M.M. 342 1 ) Three Ply Coreflat Flexible Submercible Cable Iv ) 6 Sq.M.M. 343 1 ) Three Ply Coreflat Flexible Submercible Cable V ) 10 Sq.M.M. 344 1 ) Three Ply Coreflat Flexible Submercible Cable Vi ) 16 Sq.M.M. 345 1 ) Three Ply Coreflat Flexible Submercible Cable Vii ) 25 Sq.M.M. 346 Arm Cable I ) 1.00 Sq.M.M. 347 Arm Cable Ii ) 1.50 Sq.M.M. 348 Arm Cable Iii ) 2.50 Sq.M.M. 349 Arm Cable Iv ) 4.00 Sq.M.M. 350 Arm Cable V ) 6.00 Sq.M.M. 351 Arm Cable Vi ) 10.00 Sq.M.M. 352 Arm Cable Vii ) 16.00 Sq.M.M. 353 Arm Cable Viii ) 25.00 Sq.M.M. 354 Arm Cable Ix ) 35.00 Sq.M.M. 355 Arm Cable X ) 50.00 Sq.M.M. 356 Copper Wire P.V.C. Insulated & P.V.C. Coated I ) 3 / 20 357 Copper Wire P.V.C. Insulated & P.V.C. Coated Ii ) 7 / 20 358 Copper Wire P.V.C. Insulated & P.V.C. Coated Iii ) 7 / 16 359 New Pump Shaft I ) 1.5 Hp To 6 Hp 360 New Pump Shaft Ii ) 7.5 Hp To 15 Hp 361 New Pump Shaft Iii ) 16 Hp To 30 Hp 362 New Pump Shaft Iv ) 31 Hp To 50 Hp 363 New Pump Shaft V ) 51 Hp To 70 Hp 364 New Pump Shaft Vi ) 71 Hp To 90 Hp 365 Borewell Protecting Plate 366 Borewell Protecting Cover 367 P ) 25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing Drive Out V.T. Motor From Well 368 P ) 25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing V.T. Pump Fit In Well 369 P ) 25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing Drive Out Colume Assembly With Pipeline From Well 370 P ) 25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing To Fit Colume Assembly With Pipeline In Well 371 P ) 25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing To Open V.T. Motor 372 P ) 25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing V.T. Motor Fitting & Testing 373 P ) 25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing Bowl Assembly Fitting & Testing 374 P ) 25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing To Open Bowl Assembly 375 P ) 25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing V.T. Pump Rewinding With Copper Wire. Withoutreturning Old Copper Wire 376 P ) Allignment Checking & Repairingi ) Line Shaft 377 P ) Allignment Checking & Repairingii ) Colume Pipe 378 P ) Allignment Checking & Repairingiii ) Oil Tube 379 P ) Cutting & Threading I ) Line Shaft ( R.H. / L.H ) 380 P ) Cutting & Threading Ii ) Colume Pipe ( R.H. / L.H ) 381 P ) Cutting & Threading Iii ) Oil Tube ( R.H. / L.H ) 382 P ) To Fit New Flage, Threading Coller, Welding, Nutboltin Colume Pipe 383 P ) 41.0 Hp To 65 Hp V.T. Motor Pump Set Repairing Drive Out V.T. Motor From Well 384 P ) 41.0 Hp To 65 Hp V.T. Motor Pump Set Repairing V.T. Pump Fit In Well 385 P ) 41.0 Hp To 65 Hp V.T. Motor Pump Set Repairing Drive Out Colume Assembly With Pipeline From Well 386 P ) 41.0 Hp To 65 Hp V.T. Motor Pump Set Repairing To Fit Colume Assembly With Pipeline In Well 387 P ) 41.0 Hp To 65 Hp V.T. Motor Pump Set Repairing To Open V.T. Motor 388 P ) 41.0 Hp To 65 Hp V.T. Motor Pump Set Repairing V.T. Motor Fitting & Testing 389 P ) 41.0 Hp To 65 Hp V.T. Motor Pump Set Repairing Bowl Assembly Fitting & Testing 390 P ) 41.0 Hp To 65 Hp V.T. Motor Pump Set Repairing To Open Bowl Assembly 391 P ) 41.0 Hp To 65 Hp V.T. Motor Pump Set Repairing V.T. Pump Rewinding With Copper Wire. Withoutreturning Old Copper Wire 392 P ) Allignment Checking & Repairingi ) Line Shaft 393 P ) Allignment Checking & Repairingii ) Colume Pipe 394 P ) Allignment Checking & Repairingiii ) Oil Tube 395 P ) Cutting & Threading I ) Line Shaft ( R.H. / L.H ) 396 P ) Cutting & Threading Ii ) Colume Pipe ( R.H. / L.H ) 397 P ) Cutting & Threading Iii ) Oil Tube ( R.H. / L.H ) 398 P ) To Fit New Flage, Threading Coller, Welding, Nutboltin Colume Pipe 399 P ) 66.0 Hp To 90 Hp V.T. Motor Pump Set Repairing Drive Out V.T. Motor From Well 400 P ) 66.0 Hp To 90 Hp V.T. Motor Pump Set Repairing V.T. Pump Fit In Well 401 P ) 66.0 Hp To 90 Hp V.T. Motor Pump Set Repairing Drive Out Colume Assembly With Pipeline From Well 402 P ) 66.0 Hp To 90 Hp V.T. Motor Pump Set Repairing To Fit Colume Assembly With Pipeline In Well 403 P ) 66.0 Hp To 90 Hp V.T. Motor Pump Set Repairing To Open V.T. Motor 404 P ) 66.0 Hp To 90 Hp V.T. Motor Pump Set Repairing V.T. Motor Fitting & Testing 405 P ) 66.0 Hp To 90 Hp V.T. Motor Pump Set Repairing Bowl Assembly Fitting & Testing 406 P ) 66.0 Hp To 90 Hp V.T. Motor Pump Set Repairing To Open Bowl Assembly 407 P ) 66.0 Hp To 90 Hp V.T. Motor Pump Set Repairing V.T. Pump Rewinding With Copper Wire. Withoutreturning Old Copper Wire 408 P ) Allignment Checking & Repairingi ) Line Shaft 409 P ) Allignment Checking & Repairingii ) Colume Pipe 410 P ) Allignment Checking & Repairingiii ) Oil Tube 411 P ) Cutting & Threading I ) Line Shaft ( R.H. / L.H ) 412 P ) Cutting & Threading Ii ) Colume Pipe ( R.H. / L.H ) 413 P ) Cutting & Threading Iii ) Oil Tube ( R.H. / L.H ) 414 P ) To Fit New Flage, Threading Coller, Welding, Nutboltin Colume Pipe 415 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part Forv.T. Motor Baringi ) Upper 416 V.T. Motor Baring Ii ) Lower 417 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Pdischarge & Sectioncase Baring Bush Gun Metal 418 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Water Seal ( Oil Water Separater ) 419 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Line Shaft 420 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part Foroil Tube 421 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For T.T. Plate Cast Iron 422 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Brain Rubber Bush ( Spider ) 423 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part Fornet ( Cast Iron ) 424 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Nut Bolt ¾“ X 2 “ 425 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Nut Bolt ¾“ X 6 “ 426 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Rubber Shit 427 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For T.T. Plate Bush 428 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Neck Ring ( Gun Metal ) 429 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Impelole ( Gun Metal ) 430 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Browl Assembly Casing 431 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For6” Colume Pipe M.S. 432 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For 8” Colume Pipe M.S. 433 Transformer Oil 434 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Pump Colet 435 Shaft Tube Oil 10 No. 436 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part Forimpeller Pump Shaft 437 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Litern Ring 438 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Gide Spider 439 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Colume Pipe Coplling 440 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Line Shaft Coplling 441 Oil Tube Baring 442 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Glad Nut 443 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Top Oil Tube 444 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Spider Baring Bush 445 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Guide Spider Rubber Bush With Sirclip 446 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Rubber Bush / Baring 447 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part Forline Shaft Slive S.S. 448 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Water Lubricating Tube 449 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Stuffing Box Bush & With Gaskit 450 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Stuffing Box Baring 451 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Latern Ring 452 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Sole Plate 453 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Base Plate 454 Q ) 25 Hp To 40 Hp V.T. Pum Spare Part For Water Deflector 455 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part Forv.T. Motor Baringi ) Upper 456 V.T. Motor Baring Ii ) Lower 457 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Pdischarge & Sectioncase Baring Bush Gun Metal 458 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Water Seal ( Oil Water Separater ) 459 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Line Shaft 460 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part Foroil Tube 461 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For T.T. Plate Cast Iron 462 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Brain Rubber Bush ( Spider ) 463 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part Fornet ( Cast Iron ) 464 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Nut Bolt ¾“ X 2 “ 465 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Nut Bolt ¾“ X 6 “ 466 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Rubber Shit 467 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For T.T. Plate Bush 468 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Neck Ring ( Gun Metal ) 469 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Impelole ( Gun Metal ) 470 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Browl Assembly Casing 471 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For6” Colume Pipe M.S. 472 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For 8” Colume Pipe M.S. 473 Transformer Oil 474 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Pump Colet 475 Shaft Tube Oil 10 No. 476 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part Forimpeller Pump Shaft 477 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Litern Ring 478 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Gide Spider 479 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Colume Pipe Coplling 480 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Line Shaft Coplling 481 Oil Tube Baring 482 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Glad Nut 483 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Top Oil Tube 484 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Spider Baring Bush 485 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Guide Spider Rubber Bush With Sirclip 486 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Rubber Bush / Baring 487 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part Forline Shaft Slive S.S. 488 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Water Lubricating Tube 489 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Stuffing Box Bush & With Gaskit 490 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Stuffing Box Baring 491 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Latern Ring 492 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Sole Plate 493 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Base Plate 494 Q ) 41 Hp To 65 Hp V.T. Pum Spare Part For Water Deflector 495 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part Forv.T. Motor Baringi ) Upper 496 V.T. Motor Baring Ii ) Lower 497 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Pdischarge & Sectioncase Baring Bush Gun Metal 498 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Water Seal ( Oil Water Separater ) 499 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Line Shaft 500 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part Foroil Tube 501 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For T.T. Plate Cast Iron 502 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Brain Rubber Bush ( Spider ) 503 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part Fornet ( Cast Iron ) 504 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Nut Bolt ¾“ X 2 “ 505 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Nut Bolt ¾“ X 6 “ 506 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Rubber Shit 507 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For T.T. Plate Bush 508 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Neck Ring ( Gun Metal ) 509 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Impelole ( Gun Metal ) 510 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Browl Assembly Casing 511 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For6” Colume Pipe M.S. 512 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For 8” Colume Pipe M.S. 513 Transformer Oil 514 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Pump Colet 515 Shaft Tube Oil 10 No. 516 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part Forimpeller Pump Shaft 517 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Litern Ring 518 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Gide Spider 519 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Colume Pipe Coplling 520 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Line Shaft Coplling 521 Oil Tube Baring 522 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Glad Nut 523 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Top Oil Tube 524 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Spider Baring Bush 525 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Guide Spider Rubber Bush With Sirclip 526 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Rubber Bush / Baring 527 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part Forline Shaft Slive S.S. 528 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Water Lubricating Tube 529 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Stuffing Box Bush & With Gaskit 530 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Stuffing Box Baring 531 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Latern Ring 532 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Sole Plate 533 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Base Plate 534 Q ) 66 Hp To 90 Hp V.T. Pum Spare Part For Water Deflector 535 S ) Monoblock Pump Repairingi ) Drive Out 1 Hp To 3 Hp Monoblock Pump 536 S ) Monoblock Pump Repairing Ii ) Drive Out 4 Hp To 10 Hp Monoblock Pump 537 S ) Monoblock Pump Repairing I ) 1 To 1½Hp Monoblock Motor Rewinding 538 S ) Monoblock Pump Repairing Ii ) 2 To 3Hp Monoblock Motor Rewinding 539 S ) Monoblock Pump Repairing Iii ) 4 To 5Hp Monoblock Motor Rewinding 540 S ) Monoblock Pump Repairing Iv ) 6 To 7½Hp Monoblock Motor Rewinding 541 S ) Monoblock Pump Repairing V ) 8 To 10Hp Monoblock Motor Rewinding 542 S ) Monoblock Pump Open Repairing And Fitting I ) 1 To 1½Hp 543 S ) Monoblock Pump Open Repairing And Fittingii ) 2 To 5Hp 544 S ) Monoblock Pump Open Repairing And Fitting Iii ) 6 To 10Hp 545 S ) Roter Pump Shaft Turning And Polishing I ) 1 Hp To 5 Hp 546 S ) Roter Pump Shaft Turning And Polishing Ii ) 6 Hp To 10 Hp 547 S ) Monoblock Pump Bush And Create Housing ( Baring ) I ) 1 Hp To 11 / 2 Hp 548 S ) Monoblock Pump Bush And Create Housing ( Baring ) Ii ) 2Hp To 5 Hp 549 S ) Monoblock Pump Bush And Create Housing ( Baring ) Iii ) 6 Hp To 10 Hp 550 S ) Tofit New Pump Set I ) 1 To 1½Hp 551 S ) Tofit New Pump Set Ii ) 2 To 5Hp 552 S ) Tofit New Pump Set Iii ) 6 To 10Hp 553 T ) Monoblock Pump Spare Parts 1 To 1½Hp Bearing ( Driving Side ) 554 T ) Monoblock Pump Spare Parts 1 To 1½Hp Bearing ( Driven Side ) 555 T ) Monoblock Pump Spare Parts 1 To 1½Hp Impeller Key 556 T ) Monoblock Pump Spare Parts 1 To 1½Hppump Bush 557 T ) Monoblock Pump Spare Parts 1 To 1½Hp Air Fan 558 T ) Monoblock Pump Spare Parts 1 To 1½Hp Sturnut Key 559 T ) Monoblock Pump Spare Parts 1 To 1½Hp Bearing Plate Both Side1 Item 560 T ) Monoblock Pump Spare Parts 1 To 1½Hp Water Seal 561 T ) Monoblock Pump Spare Parts 1 To 1½Hp Gland Rope 562 T ) Monoblock Pump Spare Parts 1 To 1½Hp Gland Bush 563 T ) Monoblock Pump Spare Parts 1 To 1½Hp Gland Plate 564 T ) Monoblock Pump Spare Parts 1 To 1½Hp Roter Fitted Shaft 565 T ) Monoblock Pump Spare Parts 1 To 1½Hp Latern Ring 566 T ) Monoblock Pump Spare Parts 1 To 1½Hp Impelor Brass 567 T ) Monoblock Pump Spare Parts 1 To 1½Hp Impelor C.I. 568 T ) Monoblock Pump Spare Parts 1 To 1½Hp Defuser 569 T ) Monoblock Pump Spare Parts 1 To 1½Hpbearing Housing 570 T ) Monoblock Pump Spare Parts 1 To 1½Hp Neck Ring 571 T ) Monoblock Pump Spare Parts 1 To 1½Hp Foot Volve 572 T ) Monoblock Pump Spare Parts 1 To 1½Hp Fluge ( Dilevery / Suction ) 573 T ) Monoblock Pump Spare Parts 1 To 1½Hp Shaft Sleeve 574 T ) Monoblock Pump Spare Parts 1 To 1½Hp Delivery Casing 575 T ) Monoblock Pump Spare Parts 1 To 1½Hp Stater Fitted Motorbody 576 T ) Monoblock Pump Spare Parts 1 To 1½Hp Spacer 577 T ) Monoblock Pump Spare Parts 1 To 1½Hp Fan Cover 578 T ) Monoblock Pump Spare Parts 1 To 1½Hp Water Deflector 579 T ) Monoblock Pump Spare Parts2 To 3 Hpbearing ( Driving Side ) 580 T ) Monoblock Pump Spare Parts2 To 3 Hp Bearing ( Driven Side ) 581 T ) Monoblock Pump Spare Parts2 To 3 Hp Impeller Key 582 T ) Monoblock Pump Spare Parts2 To 3 Hp Pump Bush 583 T ) Monoblock Pump Spare Parts2 To 3 Hp Air Fan 584 T ) Monoblock Pump Spare Parts2 To 3 Hp Sturnut Key 585 T ) Monoblock Pump Spare Parts2 To 3 Hp Bearing Plate Both Side1 Item 586 T ) Monoblock Pump Spare Parts2 To 3 Hp Water Seal 587 T ) Monoblock Pump Spare Parts2 To 3 Hp Gland Rope 588 T ) Monoblock Pump Spare Parts2 To 3 Hp Gland Bush 589 T ) Monoblock Pump Spare Parts2 To 3 Hp Gland Plate 590 T ) Monoblock Pump Spare Parts2 To 3 Hp Roter Fitted Shaft 591 T ) Monoblock Pump Spare Parts2 To 3 Hp Latern Ring 592 T ) Monoblock Pump Spare Parts2 To 3 Hp Impellor Brass 593 T ) Monoblock Pump Spare Parts2 To 3 Hpimpelor C.I. 594 T ) Monoblock Pump Spare Parts2 To 3 Hp Defuser 595 T ) Monoblock Pump Spare Parts2 To 3 Hp Baring Housing 596 T ) Monoblock Pump Spare Parts2 To 3 Hp Neck Ring 597 T ) Monoblock Pump Spare Parts2 To 3 Hp Foot Volve 598 T ) Monoblock Pump Spare Parts2 To 3 Hp Fluge ( Dilevery / Suction ) 599 T ) Monoblock Pump Spare Parts2 To 3 Hp Shaft Sleve 600 T ) Monoblock Pump Spare Parts2 To 3 Hp Delivery Casing 601 T ) Monoblock Pump Spare Parts2 To 3 Hp Stater Fitted Motorbody 602 T ) Monoblock Pump Spare Parts2 To 3 Hp Spacer 603 T ) Monoblock Pump Spare Parts2 To 3 Hp Fan Cover 604 T ) Monoblock Pump Spare Parts2 To 3 Hp Water Deflector 605 T ) Monoblock Pump Spare Parts4 To 5 Hp Bearing ( Driving Side ) 606 T ) Monoblock Pump Spare Parts4 To 5 Hpbearing ( Driven Side ) 607 T ) Monoblock Pump Spare Parts4 To 5 Hp Impelor Key 608 T ) Monoblock Pump Spare Parts4 To 5 Hp Pump Bush 609 T ) Monoblock Pump Spare Parts4 To 5 Hp Air Fan 610 T ) Monoblock Pump Spare Parts4 To 5 Hp Sturnut Key 611 T ) Monoblock Pump Spare Parts4 To 5 Hp Bearing Plate Both Side1 Item 612 T ) Monoblock Pump Spare Parts4 To 5 Hp Water Seal 613 T ) Monoblock Pump Spare Parts4 To 5 Hp Gland Rope 614 T ) Monoblock Pump Spare Parts4 To 5 Hp Gland Bush 615 T ) Monoblock Pump Spare Parts4 To 5 Hp Gland Plate 616 T ) Monoblock Pump Spare Parts4 To 5 Hp Roter Fitted Shaft 617 T ) Monoblock Pump Spare Parts4 To 5 Hp Latern Ring 618 T ) Monoblock Pump Spare Parts4 To 5 Hpimpeller Brass 619 T ) Monoblock Pump Spare Parts4 To 5 Hp Impelor C.I. 620 T ) Monoblock Pump Spare Parts4 To 5 Hp Defuser 621 T ) Monoblock Pump Spare Parts4 To 5 Hp Baring Housing 622 T ) Monoblock Pump Spare Parts4 To 5 Hp Neck Ring 623 T ) Monoblock Pump Spare Parts4 To 5 Hp Foot Volve 624 T ) Monoblock Pump Spare Parts4 To 5 Hp Fluge ( Dilevery / Suction ) 625 T ) Monoblock Pump Spare Parts4 To 5 Hp Shaft Sleve 626 T ) Monoblock Pump Spare Parts4 To 5 Hp Delivery Casing 627 T ) Monoblock Pump Spare Parts4 To 5 Hp Stater Fitted Motorbody 628 T ) Monoblock Pump Spare Parts4 To 5 Hp Spacer 629 T ) Monoblock Pump Spare Parts4 To 5 Hp Fan Cover 630 T ) Monoblock Pump Spare Parts4 To 5 Hp Water Deflector 631 T ) Monoblock Pump Spare Parts6 To 7½Hpbaring ( Driving Side ) 632 T ) Monoblock Pump Spare Parts6 To 7½Hp Bearing ( Driven Side ) 633 T ) Monoblock Pump Spare Parts6 To 7½Hp Impeller Key 634 T ) Monoblock Pump Spare Parts6 To 7½Hppump Bush 635 T ) Monoblock Pump Spare Parts6 To 7½Hp Air Fan 636 T ) Monoblock Pump Spare Parts6 To 7½Hp Sturnut Key 637 T ) Monoblock Pump Spare Parts6 To 7½Hp Bearing Plate Both Side1 Item 638 T ) Monoblock Pump Spare Parts6 To 7½Hp Water Seal 639 T ) Monoblock Pump Spare Parts6 To 7½Hp Gland Rope 640 T ) Monoblock Pump Spare Parts6 To 7½Hp Gland Bush 641 T ) Monoblock Pump Spare Parts6 To 7½Hp Gland Plate 642 T ) Monoblock Pump Spare Parts6 To 7½Hp Roter Fitted Shaft 643 T ) Monoblock Pump Spare Parts6 To 7½Hp Latern Ring 644 T ) Monoblock Pump Spare Parts6 To 7½Hp Impelor Brass 645 T ) Monoblock Pump Spare Parts6 To 7½Hp Impeller C.I. 646 T ) Monoblock Pump Spare Parts6 To 7½Hp Defuser 647 T ) Monoblock Pump Spare Parts6 To 7½Hp Bearing Housing 648 T ) Monoblock Pump Spare Parts6 To 7½Hp Neck Ring 649 T ) Monoblock Pump Spare Parts6 To 7½Hpfoot Volve 650 T ) Monoblock Pump Spare Parts6 To 7½Hp Fluge ( Dilevery / Suction ) 651 T ) Monoblock Pump Spare Parts6 To 7½Hp Shaft Sleve 652 T ) Monoblock Pump Spare Parts6 To 7½Hp Delivery Casing 653 T ) Monoblock Pump Spare Parts6 To 7½Hp Stater Fitted Motorbody 654 T ) Monoblock Pump Spare Parts6 To 7½Hp Spacer 655 T ) Monoblock Pump Spare Parts6 To 7½Hp Fan Cover 656 T ) Monoblock Pump Spare Parts6 To 7½Hp Water Deflector 657 T ) Monoblock Pump Spare Parts 8 To10hp Bearing ( Driving Side ) 658 T ) Monoblock Pump Spare Parts 8 To10hp Bearing ( Driven Side ) 659 T ) Monoblock Pump Spare Parts 8 To10hp Impeller Key 660 T ) Monoblock Pump Spare Parts 8 To10hp Pump Bush 661 T ) Monoblock Pump Spare Parts 8 To10hp Air Fan 662 T ) Monoblock Pump Spare Parts 8 To10hp Sturnut Key 663 T ) Monoblock Pump Spare Parts 8 To10hp Bearing Plate Both Side1 Item 664 T ) Monoblock Pump Spare Parts 8 To10hp Water Seal 665 T ) Monoblock Pump Spare Parts 8 To10hp Gland Rope 666 T ) Monoblock Pump Spare Parts 8 To10hp Gland Bush 667 T ) Monoblock Pump Spare Parts 8 To10hp Gland Plate 668 T ) Monoblock Pump Spare Parts 8 To10hp Roter Fitted Shaft 669 T ) Monoblock Pump Spare Parts 8 To10hp Latern Ring 670 T ) Monoblock Pump Spare Parts 8 To10hp Impelor Brass 671 T ) Monoblock Pump Spare Parts 8 To10hp Impelor C.I. 672 T ) Monoblock Pump Spare Parts 8 To10hp Defuser 673 T ) Monoblock Pump Spare Parts 8 To10hp Baring Housing 674 T ) Monoblock Pump Spare Parts 8 To10hp Neck Ring 675 T ) Monoblock Pump Spare Parts 8 To10hpfoot Volve 676 T ) Monoblock Pump Spare Parts 8 To10hp Fluge ( Dilevery / Suction ) 677 T ) Monoblock Pump Spare Parts 8 To10hp Shaft Sleve 678 T ) Monoblock Pump Spare Parts 8 To10hp Delivery Casing 679 T ) Monoblock Pump Spare Parts 8 To10hp Stater Fitted Motorbody 680 T ) Monoblock Pump Spare Parts 8 To10hp Spacer 681 T ) Monoblock Pump Spare Parts 8 To10hp Fan Cover 682 T ) Monoblock Pump Spare Parts 8 To10hp Water Deflector 683 U ) Bare Pump Repairingto Drive Out Bare Pump I ) 1 To 5 Hp 684 U ) Bare Pump Repairingto Drive Out Bare Pump Ii ) 6 To 9 Hp 685 U ) Bare Pump Repairingto Drive Out Bare Pump Iii ) 10 To 20 Hp 686 U ) Bare Pump Repairingto Drive Out Bare Pump Iv ) 21 To 50 Hp 687 U ) Bare Pump To Open, Repairing, Fitting & Testing I ) 1 To 5 Hp 688 U ) Bare Pump To Open, Repairing, Fitting & Testing Ii ) 6 To 9 Hp 689 U ) Bare Pump To Open, Repairing, Fitting & Testing Iii ) 10 To 20 Hp 690 U ) Bare Pump To Open, Repairing, Fitting & Testing Iv ) 21 To 50 Hp 691 U ) Bare Pump To Open, Repairing, Fitting & Testing V ) 51 To 80 Hp 692 U ) Pump Shaft Turning & Polishing I ) 1 To 5 Hp 693 U ) Pump Shaft Turning & Polishing Ii ) 6 To 9 Hp 694 U ) Pump Shaft Turning & Polishing Iii ) 10 To 20 Hp 695 U ) Pump Shaft Turning & Polishing Iv ) 21 To 50 Hp 696 U ) Pump Shaft Turning & Polishing V ) 51 To 80 Hp 697 U ) To Make Pump Bush & Housing ( Baring ) I ) 1 To 5 Hp 698 U ) To Make Pump Bush & Housing ( Baring ) Ii ) 6 To 9 Hp 699 U ) To Make Pump Bush & Housing ( Baring ) Iii ) 10 To 20 Hp 700 U ) To Make Pump Bush & Housing ( Baring ) Iv ) 21 To 50 Hp 701 U ) To Make Pump Bush & Housing ( Baring ) V ) 51 To 80 Hp 702 U ) To Fit New Bare Pump I ) 1 To 5 Hp 703 U ) To Fit New Bare Pump Ii ) 6 To 9 Hp 704 U ) To Fit New Bare Pump Iii ) 10 To 20 Hp 705 U ) To Fit New Bare Pump Iv ) 21 To 50 Hp 706 U ) To Fit New Bare Pump V ) 51 To 80 Hp 707 U ) Pump Repairing & Fitting I ) 1 To 5 Hp 708 U ) Pump Repairing & Fitting Ii ) 6 To 9 Hp 709 U ) Pump Repairing & Fitting Iii ) 10 To 20 Hp 710 U ) Pump Repairing & Fitting Iv ) 21 To 50 Hp 711 U ) Pump Repairing & Fitting V ) 51 To 80 Hp 712 U ) To Make Gland Bush Housing I ) 1 To 5 Hp 713 U ) To Make Gland Bush Housing Ii ) 6 To 9 Hp 714 U ) To Make Gland Bush Housing Iii ) 10 To 20 Hp 715 U ) To Make Gland Bush Housing Iv ) 21 To 50 Hp 716 U ) To Make Gland Bush Housing V ) 51 To 80 Hp 717 U ) Drive Out Bare Pump Pipe Line With Foot Volve I ) 1 To 5 Hp 718 U ) Drive Out Bare Pump Pipe Line With Foot Volve Ii ) 6 To 9 Hp 719 U ) Drive Out Bare Pump Pipe Line With Foot Volve Iii ) 10 To 20 Hp 720 U ) Drive Out Bare Pump Pipe Line With Foot Volve Iv ) 21 To 50 Hp 721 U ) Drive Out Bare Pump Pipe Line With Foot Volve V ) 51 To 80 Hp 722 U ) To Fit Bare Pump Pipeline With Foot Volve I ) 1 To 5 Hp 723 U ) To Fit Bare Pump Pipeline With Foot Volve Ii ) 6 To 9 Hp 724 U ) To Fit Bare Pump Pipeline With Foot Volve Iii ) 10 To 20 Hp 725 U ) To Fit Bare Pump Pipeline With Foot Volve Iv ) 21 To 50 Hp 726 U ) To Fit Bare Pump Pipeline With Foot Volve V ) 51 To 80 Hp 727 V ) Bare Pump Spare Parts1 To 5Hpbaring ( Ball Baring ) 728 V ) Bare Pump Spare Parts1 To 5Hp Rolar Baring 729 V ) Bare Pump Spare Parts1 To 5Hp Impelor Key 730 V ) Bare Pump Spare Parts1 To 5Hp Pump Bush 731 V ) Bare Pump Spare Parts1 To 5Hp Stud Nut 732 V ) Bare Pump Spare Parts1 To 5Hp Bnut Bolt Kit 733 V ) Bare Pump Spare Parts1 To 5Hp Air Cock 734 V ) Bare Pump Spare Parts1 To 5Hp Base Plate 735 V ) Bare Pump Spare Parts1 To 5Hp Water Seal 736 V ) Bare Pump Spare Parts1 To 5Hp Gland Bush 737 V ) Bare Pump Spare Parts1 To 5Hp Gland Plate 738 V ) Bare Pump Spare Parts1 To 5Hp Pump Shaft 739 V ) Bare Pump Spare Parts1 To 5Hp Latern Ring 740 V ) Bare Pump Spare Parts1 To 5Hp Impeller Brass 741 V ) Bare Pump Spare Parts1 To 5Hp Impeller ( C.I ) 742 V ) Bare Pump Spare Parts1 To 5Hp Difuser 743 V ) Bare Pump Spare Parts1 To 5Hp Bearing Housing 744 V ) Bare Pump Spare Parts1 To 5Hp Neck Ring ( Small ) 745 V ) Bare Pump Spare Parts1 To 5Hp Neck Ring ( Big ) 746 V ) Bare Pump Spare Parts1 To 5Hpflasher 747 V ) Bare Pump Spare Parts1 To 5Hp Foot Volve 748 Check Nut 1 To 5Hp 749 V ) Bare Pump Spare Parts1 To 5Hp Impelor Housing 750 V ) Bare Pump Spare Parts1 To 5Hp Rotor Casing 751 V ) Bare Pump Spare Parts1 To 5Hp Rotor 752 V ) Bare Pump Spare Parts1 To 5Hp Delevery Casing 753 V ) Bare Pump Spare Parts1 To 5Hp Stuffing Box Bush 754 V ) Bare Pump Spare Parts1 To 5Hp Shaft Sleve 755 V ) Bare Pump Spare Parts1 To 5Hp Water Deflector 756 V ) Bare Pump Spare Parts1 To 5Hp Couplling Half Flexible 757 V ) Bare Pump Spare Parts1 To 5Hp Bearing Cover 758 V ) Bare Pump Spare Parts1 To 5Hp Grees Cup 759 V ) Bare Pump Spare Parts1 To 5Hp Flage Section / Delivery 760 V ) Bare Pump Spare Parts6 To 9Hpbaring ( Ball Baring ) 761 V ) Bare Pump Spare Parts6 To 9Hp Rolar Baring 762 V ) Bare Pump Spare Parts6 To 9Hp Impelor Key 763 V ) Bare Pump Spare Parts6 To 9Hp Pump Bush 764 V ) Bare Pump Spare Parts6 To 9Hp Stud Nut 765 V ) Bare Pump Spare Parts6 To 9Hp Bnut Bolt Kit 766 V ) Bare Pump Spare Parts6 To 9Hp Air Cock 767 V ) Bare Pump Spare Parts6 To 9Hp Base Plate 768 V ) Bare Pump Spare Parts6 To 9Hp Water Seal 769 V ) Bare Pump Spare Parts6 To 9Hp Gland Bush 770 V ) Bare Pump Spare Parts6 To 9Hp Gland Plate 771 V ) Bare Pump Spare Parts6 To 9Hp Pump Shaft 772 V ) Bare Pump Spare Parts6 To 9Hp Latern Ring 773 V ) Bare Pump Spare Parts6 To 9Hp Impeller Brass 774 V ) Bare Pump Spare Parts6 To 9Hp Impeller ( C.I ) 775 V ) Bare Pump Spare Parts6 To 9Hp Difuser 776 V ) Bare Pump Spare Parts6 To 9Hp Bearing Housing 777 V ) Bare Pump Spare Parts6 To 9Hp Neck Ring ( Small ) 778 V ) Bare Pump Spare Parts6 To 9Hp Neck Ring ( Big ) 779 V ) Bare Pump Spare Parts6 To 9Hpflasher 780 V ) Bare Pump Spare Parts6 To 9Hp Foot Volve 781 Check Nut 6 To 9Hp 782 V ) Bare Pump Spare Parts6 To 9Hp Impelor Housing 783 V ) Bare Pump Spare Parts6 To 9Hp Rotor Casing 784 V ) Bare Pump Spare Parts6 To 9Hp Rotor 785 V ) Bare Pump Spare Parts6 To 9Hp Delevery Casing 786 V ) Bare Pump Spare Parts6 To 9Hp Stuffing Box Bush 787 V ) Bare Pump Spare Parts6 To 9Hp Shaft Sleve 788 V ) Bare Pump Spare Parts6 To 9Hp Water Deflector 789 V ) Bare Pump Spare Parts6 To 9Hp Couplling Half Flexible 790 V ) Bare Pump Spare Parts6 To 9Hp Bearing Cover 791 V ) Bare Pump Spare Parts6 To 9Hp Grees Cup 792 V ) Bare Pump Spare Parts6 To 9Hp Flage Section / Delivery 793 V ) Bare Pump Spare Parts10 To 20Hpbaring ( Ball Baring ) 794 V ) Bare Pump Spare Parts10 To 20Hp Rolar Baring 795 V ) Bare Pump Spare Parts10 To 20Hp Impelor Key 796 V ) Bare Pump Spare Parts10 To 20Hp Pump Bush 797 V ) Bare Pump Spare Parts10 To 20Hp Stud Nut 798 V ) Bare Pump Spare Parts10 To 20Hp Bnut Bolt Kit 799 V ) Bare Pump Spare Parts10 To 20Hp Air Cock 800 V ) Bare Pump Spare Parts10 To 20Hp Base Plate 801 V ) Bare Pump Spare Parts10 To 20Hp Water Seal 802 V ) Bare Pump Spare Parts10 To 20Hp Gland Bush 803 V ) Bare Pump Spare Parts10 To 20Hp Gland Plate 804 V ) Bare Pump Spare Parts10 To 20Hp Pump Shaft 805 V ) Bare Pump Spare Parts10 To 20Hp Latern Ring 806 V ) Bare Pump Spare Parts10 To 20Hp Impeller Brass 807 V ) Bare Pump Spare Parts10 To 20Hp Impeller ( C.I ) 808 V ) Bare Pump Spare Parts10 To 20Hp Difuser 809 V ) Bare Pump Spare Parts10 To 20Hp Bearing Housing 810 V ) Bare Pump Spare Parts10 To 20Hp Neck Ring ( Small ) 811 V ) Bare Pump Spare Parts10 To 20Hp Neck Ring ( Big ) 812 V ) Bare Pump Spare Parts10 To 20Hpflasher 813 V ) Bare Pump Spare Parts10 To 20Hp Foot Volve 814 Check Nut 10 To 20Hp 815 V ) Bare Pump Spare Parts10 To 20Hp Impelor Housing 816 V ) Bare Pump Spare Parts10 To 20Hp Rotor Casing 817 V ) Bare Pump Spare Parts10 To 20Hp Rotor 818 V ) Bare Pump Spare Parts10 To 20Hp Delevery Casing 819 V ) Bare Pump Spare Parts10 To 20Hp Stuffing Box Bush 820 V ) Bare Pump Spare Parts10 To 20Hp Shaft Sleve 821 V ) Bare Pump Spare Parts10 To 20Hp Water Deflector 822 V ) Bare Pump Spare Parts10 To 20Hp Couplling Half Flexible 823 V ) Bare Pump Spare Parts10 To 20Hp Bearing Cover 824 V ) Bare Pump Spare Parts10 To 20Hp Grees Cup 825 V ) Bare Pump Spare Parts10 To 20Hp Flage Section / Delivery 826 V ) Bare Pump Spare Parts21 To 50Hpbaring ( Ball Baring ) 827 V ) Bare Pump Spare Parts21 To 50Hp Rolar Baring 828 V ) Bare Pump Spare Parts21 To 50Hp Impelor Key 829 V ) Bare Pump Spare Parts21 To 50Hp Pump Bush 830 V ) Bare Pump Spare Parts21 To 50Hp Stud Nut 831 V ) Bare Pump Spare Parts21 To 50Hp Bnut Bolt Kit 832 V ) Bare Pump Spare Parts21 To 50Hp Air Cock 833 V ) Bare Pump Spare Parts21 To 50Hp Base Plate 834 V ) Bare Pump Spare Parts21 To 50Hp Water Seal 835 V ) Bare Pump Spare Parts21 To 50Hp Gland Bush 836 V ) Bare Pump Spare Parts21 To 50Hp Gland Plate 837 V ) Bare Pump Spare Parts21 To 50Hp Pump Shaft 838 V ) Bare Pump Spare Parts21 To 50Hp Latern Ring 839 V ) Bare Pump Spare Parts21 To 50Hp Impeller Brass 840 V ) Bare Pump Spare Parts21 To 50Hp Impeller ( C.I ) 841 V ) Bare Pump Spare Parts21 To 50Hp Difuser 842 V ) Bare Pump Spare Parts21 To 50Hp Bearing Housing 843 V ) Bare Pump Spare Parts21 To 50Hp Neck Ring ( Small ) 844 V ) Bare Pump Spare Parts21 To 50Hp Neck Ring ( Big ) 845 V ) Bare Pump Spare Parts21 To 50Hpflasher 846 V ) Bare Pump Spare Parts21 To 50Hp Foot Volve 847 Check Nut 21 To 50Hp 848 V ) Bare Pump Spare Parts21 To 50Hp Impelor Housing 849 V ) Bare Pump Spare Parts21 To 50Hp Rotor Casing 850 V ) Bare Pump Spare Parts21 To 50Hp Rotor 851 V ) Bare Pump Spare Parts21 To 50Hp Delevery Casing 852 V ) Bare Pump Spare Parts21 To 50Hp Stuffing Box Bush 853 V ) Bare Pump Spare Parts21 To 50Hp Shaft Sleve 854 V ) Bare Pump Spare Parts21 To 50Hp Water Deflector 855 V ) Bare Pump Spare Parts21 To 50Hp Couplling Half Flexible 856 V ) Bare Pump Spare Parts21 To 50Hp Bearing Cover 857 V ) Bare Pump Spare Parts21 To 50Hp Grees Cup 858 V ) Bare Pump Spare Parts21 To 50Hp Flage Section / Delivery 859 V ) Bare Pump Spare Parts 51 To 90 Hpbaring ( Ball Baring ) 860 V ) Bare Pump Spare Parts 51 To 90 Hp Rolar Baring 861 V ) Bare Pump Spare Parts 51 To 90 Hp Impelor Key 862 V ) Bare Pump Spare Parts 51 To 90 Hp Pump Bush 863 V ) Bare Pump Spare Parts 51 To 90 Hp Stud Nut 864 V ) Bare Pump Spare Parts 51 To 90 Hp Bnut Bolt Kit 865 V ) Bare Pump Spare Parts 51 To 90 Hp Air Cock 866 V ) Bare Pump Spare Parts 51 To 90 Hp Base Plate 867 V ) Bare Pump Spare Parts 51 To 90 Hp Water Seal 868 V ) Bare Pump Spare Parts 51 To 90 Hp Gland Bush 869 V ) Bare Pump Spare Parts 51 To 90 Hp Gland Plate 870 V ) Bare Pump Spare Parts 51 To 90 Hp Pump Shaft 871 V ) Bare Pump Spare Parts 51 To 90 Hp Latern Ring 872 V ) Bare Pump Spare Parts 51 To 90 Hp Impeller Brass 873 V ) Bare Pump Spare Parts 51 To 90 Hp Impeller ( C.I ) 874 V ) Bare Pump Spare Parts 51 To 90 Hp Difuser 875 V ) Bare Pump Spare Parts 51 To 90 Hp Bearing Housing 876 V ) Bare Pump Spare Parts 51 To 90 Hp Neck Ring ( Small ) 877 V ) Bare Pump Spare Parts 51 To 90 Hp Neck Ring ( Big ) 878 V ) Bare Pump Spare Parts 51 To 90 Hpflasher 879 V ) Bare Pump Spare Parts 51 To 90 Hp Foot Volve 880 Check Nut51 To 90 Hp 881 V ) Bare Pump Spare Parts 51 To 90 Hp Impelor Housing 882 V ) Bare Pump Spare Parts 51 To 90 Hp Rotor Casing 883 V ) Bare Pump Spare Parts 51 To 90 Hp Rotor 884 V ) Bare Pump Spare Parts 51 To 90 Hp Delevery Casing 885 V ) Bare Pump Spare Parts 51 To 90 Hp Stuffing Box Bush 886 V ) Bare Pump Spare Parts 51 To 90 Hp Shaft Sleve 887 V ) Bare Pump Spare Parts 51 To 90 Hp Water Deflector 888 V ) Bare Pump Spare Parts 51 To 90 Hp Couplling Half Flexible 889 V ) Bare Pump Spare Parts 51 To 90 Hp Bearing Cover 890 V ) Bare Pump Spare Parts 51 To 90 Hp Grees Cup 891 V ) Bare Pump Spare Parts 51 To 90 Hp Flage Section / Delivery 892 W ) Bare Motor Repairing Drive Out Bare Motor I ) 1 Hp To 5 Hp 893 W ) Bare Motor Repairing Drive Out Bare Motor Ii ) 6 Hp To 6 Hp 894 W ) Bare Motor Repairing Drive Out Bare Motor Iii ) 10 Hp To 20 Hp 895 W ) Bare Motor Repairing Drive Out Bare Motor Iv ) 21 Hp To 50 Hp 896 W ) Bare Motor Repairing Drive Out Bare Motor V ) 51 Hp To 90 Hp 897 W ) Bare Motor Rewindingi ) 1 Hp To 5 Hp 898 W ) Bare Motor Rewindingii ) 6 Hp To 6 Hp 899 W ) Bare Motor Rewindingiii ) 10 Hp To 20 Hp 900 W ) Bare Motor Rewindingiv ) 21 Hp To 50 Hp 901 W ) Bare Motor Rewindingv ) 51 Hp To 90 Hp 902 W ) Motor Opening, Over Oiling, Fitting & Testing I ) 1 Hp To 5 Hp 903 W ) Motor Opening, Over Oiling, Fitting & Testing Ii ) 6 Hp To 6 Hp 904 W ) Motor Opening, Over Oiling, Fitting & Testing Iii ) 10 Hp To 20 Hp 905 W ) Motor Opening, Over Oiling, Fitting & Testing Iv ) 21 Hp To 50 Hp 906 W ) Motor Opening, Over Oiling, Fitting & Testing V ) 51 Hp To 90 Hp 907 W ) Rotor Shaft Turning & Polishing I ) 1 Hp To 5 Hp 908 W ) Rotor Shaft Turning & Polishing Ii ) 6 Hp To 6 Hp 909 W ) Rotor Shaft Turning & Polishing Iii ) 10 Hp To 20 Hp 910 W ) Rotor Shaft Turning & Polishing Iv ) 21 Hp To 50 Hp 911 W ) Rotor Shaft Turning & Polishing V ) 51 Hp To 90 Hp 912 W ) To Make Motor Bush & Housing ( Baring Sheet ) I ) 1 Hp To 5 Hp 913 W ) To Make Motor Bush & Housing ( Baring Sheet ) Ii ) 6 Hp To 6 Hp 914 W ) To Make Motor Bush & Housing ( Baring Sheet ) Iii ) 10 Hp To 20 Hp 915 W ) To Make Motor Bush & Housing ( Baring Sheet ) Iv ) 21 Hp To 50 Hp 916 W ) To Make Motor Bush & Housing ( Baring Sheet ) V ) 51 Hp To 90 Hp 917 W ) To Fit New Motor I ) 1 Hp To 5 Hp 918 W ) To Fit New Motor Ii ) 6 Hp To 6 Hp 919 W ) To Fit New Motor Iii ) 10 Hp To 20 Hp 920 W ) To Fit New Motor Iv ) 21 Hp To 50 Hp 921 W ) To Fit New Motor V ) 51 Hp To 90 Hp 922 W ) Panel Board & Starter Repairing I ) 1 Hp To 5 Hp 923 W ) Panel Board & Starter Repairing Ii ) 6 Hp To 6 Hp 924 W ) Panel Board & Starter Repairing Iii ) 10 Hp To 20 Hp 925 W ) Panel Board & Starter Repairing Iv ) 21 Hp To 50 Hp 926 W ) Panel Board & Starter Repairing V ) 51 Hp To 70 Hp 927 W ) Panel Board & Starter Repairing Vi ) 71 Hp To 90 Hp 928 W ) To Fit Motor As It Is I ) 1 Hp To 5 Hp 929 W ) To Fit Motor As It Is Ii ) 6 Hp To 6 Hp 930 W ) To Fit Motor As It Is Iii ) 10 Hp To 20 Hp 931 W ) To Fit Motor As It Is Iv ) 21 Hp To 50 Hp 932 W ) To Fit Motor As It Is V ) 51 Hp To 90 Hp 933 X ) Bare Motor Spare Parts1 To 5Hp Bearing 934 X ) Bare Motor Spare Parts1 To 5Hp Air Fan 935 X ) Bare Motor Spare Parts1 To 5Hp Shaft 936 X ) Bare Motor Spare Parts1 To 5Hp Bearing Plate 937 X ) Bare Motor Spare Parts1 To 5Hp Motor Bush 938 X ) Bare Motor Spare Parts1 To 5Hp Rotor Assembly 939 X ) Bare Motor Spare Parts1 To 5Hp Stud Nut Kit 940 X ) Bare Motor Spare Parts1 To 5Hp Nut Bolt Kit 941 X ) Bare Motor Spare Parts6 To 9Hp Bearing 942 X ) Bare Motor Spare Parts6 To 9Hp Air Fan 943 X ) Bare Motor Spare Parts6 To 9Hp Shaft 944 X ) Bare Motor Spare Parts6 To 9Hp Bearing Plate 945 X ) Bare Motor Spare Parts6 To 9Hp Motor Bush 946 X ) Bare Motor Spare Parts6 To 9Hp Rotor Assembly 947 X ) Bare Motor Spare Parts6 To 9Hp Stud Nut Kit 948 X ) Bare Motor Spare Parts6 To 9Hp Nut Bolt Kit 949 X ) Bare Motor Spare Parts10 To 20Hp Bearing 950 X ) Bare Motor Spare Parts10 To 20Hp Air Fan 951 X ) Bare Motor Spare Parts10 To 20Hp Shaft 952 X ) Bare Motor Spare Parts10 To 20Hp Bearing Plate 953 X ) Bare Motor Spare Parts10 To 20Hp Motor Bush 954 X ) Bare Motor Spare Parts10 To 20Hp Rotor Assembly 955 X ) Bare Motor Spare Parts10 To 20Hp Stud Nut Kit 956 X ) Bare Motor Spare Parts10 To 20Hp Nut Bolt Kit 957 X ) Bare Motor Spare Parts21 To 50Hp Bearing 958 X ) Bare Motor Spare Parts21 To 50Hp Air Fan 959 X ) Bare Motor Spare Parts21 To 50Hp Shaft 960 X ) Bare Motor Spare Parts21 To 50Hp Bearing Plate 961 X ) Bare Motor Spare Parts21 To 50Hp Motor Bush 962 X ) Bare Motor Spare Parts21 To 50Hp Rotor Assembly 963 X ) Bare Motor Spare Parts21 To 50Hp Stud Nut Kit 964 X ) Bare Motor Spare Parts21 To 50Hp Nut Bolt Kit 965 X ) Bare Motor Spare Parts51 To 90Hp Bearing 966 X ) Bare Motor Spare Parts51 To 90Hp Air Fan 967 X ) Bare Motor Spare Parts51 To 90Hp Shaft 968 X ) Bare Motor Spare Parts51 To 90Hp Bearing Plate 969 X ) Bare Motor Spare Parts51 To 90Hp Motor Bush 970 X ) Bare Motor Spare Parts51 To 90Hp Rotor Assembly 971 X ) Bare Motor Spare Parts51 To 90Hp Stud Nut Kit 972 X ) Bare Motor Spare Parts51 To 90Hp Nut Bolt Kit 973 Y ) Vaccume Pump Repairing Drive Out Pump I ) 1 To 3 Hp 974 Y ) Vaccume Pump Repairing Drive Out Pump Ii ) 4 To 5 Hp 975 Y ) Vaccume Pump Repairing Motor Rewinding ( Vaccum Pump ) I ) 1 To 3 Hp 976 Y ) Vaccume Pump Repairing Motor Rewinding ( Vaccum Pump ) Ii ) 4 To 5 Hp 977 Y ) Vaccume Pump Repairing Drive Out Pump Pump Opening, Repairing, Over Oiling, Fitting & Testing I ) 1 To 3 Hp 978 Y ) Vaccume Pump Repairing Drive Out Pump Pump Opening, Repairing, Over Oiling, Fitting & Testing Ii ) 4 To 5 Hp 979 Y ) Rotor Shaft Turning & Polishing I ) 1 To 3 Hp 980 Y ) Rotor Shaft Turning & Polishing Ii ) 4 To 5 Hp 981 Y ) To Make Vaccume Pump Bush & Baring Housing I ) 1 To 3 Hp 982 Y ) To Make Vaccume Pump Bush & Baring Housing Ii ) 4 To 5 Hp 983 Y ) To Fit New Pump Set I ) 1 To 3 Hp 984 Y ) To Fit New Pump Set Ii ) 4 To 5 Hp 985 Y ) Panel Board & Starter Repairing I ) 1 To 3 Hp 986 Y ) Panel Board & Starter Repairing Ii ) 4 To 5 Hp 987 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Bearing 988 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Impeller Key 989 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Pump Bush 990 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Air Fan 991 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Sturnut Key 992 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Bearing Plate Both Side 993 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Mechanical Seal 994 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Gland Rope 995 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Gland Bush 996 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Gland Plate 997 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Rotor Fitted Shaft 998 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Latern Ring 999 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Rotor G.M. 1000 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Fan Cover 1001 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Spacer 1002 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Bearing Housing 1003 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Neck Ring 1004 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Port Plate 1005 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Flage ( Delevery / Section ) 1006 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Shaft Sleve 1007 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Suction & Delivery Chember 1008 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Steter Fitted Motorbody 1009 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Tie Rod 1010 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Rotor Casing 1011 Z ) Vaccume Pump Spare Parts 1 To 3 Hp Liquid Diflector 1012 Z ) Vaccume Pump Spare Parts 4 To 5 Hpbearing 1013 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Impeller Key 1014 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Pump Bush 1015 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Air Fan 1016 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Sturnut Key 1017 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Bearing Plate Both Side 1018 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Mechanical Seal 1019 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Gland Rope 1020 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Gland Bush 1021 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Gland Plate 1022 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Rotor Fitted Shaft 1023 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Latern Ring 1024 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Rotor G.M. 1025 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Fan Cover 1026 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Spacer 1027 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Bearing Housing 1028 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Neck Ring 1029 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Port Plate 1030 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Flage ( Delevery / Section ) 1031 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Shaft Sleve 1032 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Suction & Delivery Chember 1033 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Steter Fitted Motorbody 1034 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Tie Rod 1035 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Rotor Casing 1036 Z ) Vaccume Pump Spare Parts 4 To 5 Hp Liquid Diflector 1037 A.A. ) Assesaries In Control Panel & Starter Spare Parts Starter Reley I ) 6 To 10A. 1038 A.A. ) Assesaries In Control Panel & Starter Spare Parts Starter Reley Ii ) 9 To 14 A. 1039 Ia.A. ) Assesaries In Control Panel & Starter Spare Parts Starter Reley Ii ) 13 To 21 A 1040 A.A. ) Assesaries In Control Panel & Starter Spare Parts Starter Reley Iv ) 19 To 27 A 1041 A.A. ) Assesaries In Control Panel & Starter Spare Parts Starter Reley V ) 21 To 32 A 1042 A.A. ) Assesaries In Control Panel & Starter Spare Parts Starter Reley V ) 30 To 42 A 1043 A.A. ) Assesaries In Control Panel & Starter Spare Parts Starter Reley V ) 40 To 65 A 1044 A.A. ) Assesaries In Control Panel & Starter Spare Parts Starter Reley V ) 60 To 90 A 1045 A.A. ) Assesaries In Control Panel & Starter Spare Parts Starter Reley V ) 90 To 120 A 1046 A.A. ) Assesaries In Control Panel & Starter Spare Parts Starter Reley V ) 120 To 150 A 1047 A.A. ) Assesaries In Control Panel & Starter Spare Parts Starter Reley V ) 150 To 180 A 1048 Starter No Volt & Over Load Coil 1049 Contactor Set Full I ) S. K. -1 1050 Contactor Set Full Ii ) M.L. -1 1051 Contactor Set Full Iii ) M.L. -2 1052 Contactor Set Full Iv ) M.L. -3 1053 Contactor Set Full V ) M.L. - 4 1054 Contactor Set Full V ) M.N. - 45 1055 Contactor Set Full V ) M.N. - 65 1056 Contactor Set Full V ) M.N. - 90 1057 Contactor Set Full V ) M.N. - 120 1058 Contactor Set Full V ) M.N. - 150 1059 Contactor Set Full V ) M.N. - 180 1060 Reley Plate ( Kit ) 1061 Contactor Point Kit I ) M. K. -1 1062 Contactor Point Kit Ii ) M.L. -1 1063 Contactor Point Kit Iii ) M.L. -2 1064 Contactor Point Kit Iv ) M.L. -3 1065 Contactor Point Kit V ) M.L. - 4 1066 Contactor Point Kit Vi ) M.N. - 45 1067 Contactor Point Kit Vii ) M.N. - 65 1068 Contactor Point Kit Viii ) M.N. - 90 1069 Contactor Point Kit Ix ) M.N. - 120 1070 Contactor Point Kit X ) M.N. - 150 1071 Contactor Point Kit Xi ) M.N. - 180 1072 I ) Fuse Grip 16 A. 1073 Ii ) Fuse Grip 32 A. 1074 Iii ) Fuse Grip 63 A. 1075 Iv ) Fuse Grip 100 A 1076 V ) Fuse Grip 200 A.. 1077 Vi ) Fuse Grip 300 A.. 1078 Fuse Basei ) 16 A. 1079 Fuse Baseii ) 32 A. 1080 Fuse Baseiii ) 63 A. 1081 Fuse Baseiv ) 100 A. 1082 Fuse Basev ) 200 A. 1083 Fuse Basevi ) 300 A. 1084 Connector Plate 1085 Connector Plate I ) Volt Meter 0-440 Volt Small 1086 Connector Plate Ii ) Volt Meter 0-440 Volt Big 1087 Ampear Meter I ) 0 To 15 A. 1088 Ampear Meter Ii ) 0 To 50 A. 1089 Ampear Meter Iii ) 0 To 100 A. 1090 Ampear Meter Iv ) 0 150 A. 1091 Ampear Meter Iv ) 0 300 A. 1092 Capacitor 1 K.V.A.R. 1093 Single Phasing Preventor 1094 Water Level Guardwith 60 M. Wire 1095 On-Off Rotery Switch 1096 Volt Meter / Ampere Meter Switch 1097 Neon Indicator Lamp 1098 Main Switch 440 Volt Three Phase I ) 16 A. 1099 Main Switch 440 Volt Three Phase Ii ) 32 A. 1100 Main Switch 440 Volt Three Phase Iii ) 63 A. 1101 Main Switch 440 Volt Three Phase Iv ) 100 A. 1102 Main Switch 440 Volt Three Phase V ) 200 A. 1103 Main Switch 440 Volt Three Phase Vi ) 300 A. 1104 M.C.B.Unit I ) 32 A. 1105 M.C.B.Unit Ii ) 63 A. 1106 M.C.B.Unit Iii ) 100 A. 1107 M.C.B.Unit Iv ) 200 A. 1108 M.C.B.Unit Iv ) 300 A. 1109 H.R. C. Fuse I ) 100 A. 1110 H.R. C. Fuse Ii ) 125 A. 1111 H.R. C. Fuse Iii ) 200 A. 1112 H.R. C. Fuse Iv ) 300 A. 1113 Aquazilary Coil 1114 Timer Coil 1115 C.T. Coil I ) 60 A. 1116 C.T. Coil Ii ) 100 A. 1117 C.T. Coil Iii ) 200 A. 1118 C.T. Coil Iii ) 300 A. 1119 Tog Tester 1120 Multi Meter 1121 Insulation Tester 1122 Meger 1123 Hand Gloves - 1 Pair ( Rubber ) 1124 Insulated Rubber Matting 1125 To Arthing With Arthing 300 X 300 X 50 M.M. Arthing Plate, G I. Pipe & Arthing Wire 1126 To Arthing With Arthing 450 X 450 X 50 M.M. Arthing Plate, G I. Pipe & Arthing Wire 1127 Arthing Wire 14 To 6 Guage 1128 Starter D.O.L I ) 1 To 5 Hp 1129 Star Deltaii ) 5 To 50 Hp 1130 Iii ) Star Delta Auto 10 To 20 Hp 1131 Iv ) Auto Transfarmer Starter 20 To 40 Hp 1132 V ) Star Delta Auto 21 To 30 Hp 1133 Vi ) Auto Transfarmer Starter 31 To 50 Hp 1134 Vii ) Auto Transfarmer Starter 51 To 70 Hp 1135 Viii ) Auto Transfarmer Starter 71 To 90 Hp 1136 Transfarmer Coil Rewinding With Copper Wire In Transfarmer Starter. Without Returning Old Copper Wire. 1137 Change Over Switch 50 A. 3 Phase 1138 Change Over Switch 100 A. 3 Phase 1139 Change Over Switch 200 A. 3 Phase 1140 Buz Bar 30 To 50 Hp 1141 Buz Bar 51 To 90 Hp 1142 Transfarmer Oil 1143 Borewell Yield Test With 3.00 Hp Pump 1144 Borewell Yield Test With Electric Generating Set 1145 1.5 Hp Submersible Pump Set ( Pump Upto 20 Stages ) Providing Erecting And Giving Test Of 100 Mm Dia Submersible Pump Set Confirming To Is 8034 And Motor Confirming Is 9283 1146 2.0Hp Submersible Pump Set ( Pump Upto 20 Stages ) Providing Erecting And Giving Test Of 100 Mm Dia Submersible Pump Set Confirming To Is 8034 And Motor Confirming Is 9283 1147 2.5 Hp Submersible Pump Set ( Pump Upto 20 Stages ) Providing Erecting And Giving Test Of 100 Mm Dia Submersible Pump Set Confirming To Is 8034 And Motor Confirming Is 9283 1148 3.0 Hp Submersible Pump Set ( Pump Upto 20 Stages ) Providing Erecting And Giving Test Of 100 Mm Dia Submersible Pump Set Confirming To Is 8034 And Motor Confirming Is 9283 1149 4.00 Hpsubmersible Pump Set ( Pump Upto 20 Stages ) Providing Erecting And Giving Test Of 100 Mm Dia Submersible Pump Set Confirming To Is 8034 And Motor Confirming Is 9283 1150 5.00 Hp Submersible Pump Set ( Pump Upto 20 Stages ) Providing Erecting And Giving Test Of 100 Mm Dia Submersible Pump Set Confirming To Is 8034 And Motor Confirming Is 9283 1151 Supplying And Eracting Submersibal Pump Set 0.75 Kw / 1Hp Withv 50 Cycles As Supply Sutabel For 100 Mm Dia Borewell. Suitable For 10 To 50 Lpm Discgarge At 7020 M And ( Max Efficiency At 52 M. Head 30 Lpm Discharge ) & Delivery Pipe Of 32Mm Diameter With Nacessary H.Type Clamp As Perspecification No.Wp Smp 1152 Supplying And Eracting 3Cpre Pvc.Insulated Flat Flexible Submersibal Cable With Copper Conductor, Pvc Insulated And Pvc Sheathed 3 Core 2.5 Sq.Mm 1153 Supplying And Eracting 3Cpre Pvc.Insulated Flat Flexible Submersibal Cable With Copper Conductor, Pvc Insulated And Pvc Sheathed 3 Core 4 Sq.Mm 1154 Providing [ Suplying & In Standard Lengts Mdpl Pipes. Conforming To I.S.O. 4427:1996 / With Necessary Jointing Material Like Mechanical Connectiion I.E. Thread / Insert Joint / Quick Release Coupler Joint / Compression Fitting Joint Or Flanged Joint --- Etc Complet .Pn-16 Sdr-9 25 Mm 1155 Providing [ Suplying & In Standard Lengts Mdpl Pipes. Conforming To I.S.O. 4427:1996 / With Necessary Jointing Material Like Mechanical Connectiion I.E. Thread / Insert Joint / Quick Release Coupler Joint / Compression Fitting Joint Or Flanged Joint --- Etc Complet .Pn-16 Sdr-9 32 Mm 1156 Providing [ Suplying & In Standard Lengts Mdpl Pipes. Conforming To I.S.O. 4427:1996 / With Necessary Jointing Material Like Mechanical Connectiion I.E. Thread / Insert Joint / Quick Release Coupler Joint / Compression Fitting Joint Or Flanged Joint --- Etc Complet .Pn-16 Sdr-9 40 Mm 1157 Providing [ Suplying & In Standard Lengts Mdpl Pipes. Conforming To I.S.O. 4427:1996 / With Necessary Jointing Material Like Mechanical Connectiion I.E. Thread / Insert Joint / Quick Release Coupler Joint / Compression Fitting Joint Or Flanged Joint --- Etc Complet .Pn-16 Sdr-9 50 Mm 1158 Providing Isi Mark Gi Pipe With One Coupler Of Following Class And Dia Including All Local And Central Taxces, Octroi [ Inspection Charges, Transportation To Storoes Etc. Complet.Is 1239 / 2004 25Mm Dia Medium 1159 Providing Isi Mark Gi Pipe With One Coupler Of Following Class And Dia Including All Local And Central Taxces, Octroi [ Inspection Charges, Transportation To Storoes Etc. Complet.Is 1239 / 2004 32 Mm Dia Medium 1160 Providing Isi Mark Gi Pipe With One Coupler Of Following Class And Dia Including All Local And Central Taxces, Octroi [ Inspection Charges, Transportation To Storoes Etc. Complet.Is 1239 / 2004 40 Mm Dia Medium 1161 Providing Isi Mark Gi Pipe With One Coupler Of Following Class And Dia Including All Local And Central Taxces, Octroi [ Inspection Charges, Transportation To Storoes Etc. Complet.Is 1239 / 2004 50Mm Dia Medium 1162 Lowering, Laying, Jointing G.I. Pipes And Specials Of Following Class And Dia. Including Conveyance From Stores To Site Of Works, All Labour, Giving Satisfactory Hydraulic Testing Etc. Complet. Either Underground Or In Vertical Position, As Directed By Engineer - In- Charge25 Mm Dia Medium 1163 Lowering, Laying, Jointing G.I. Pipes And Specials Of Following Class And Dia. Including Conveyance From Stores To Site Of Works, All Labour, Giving Satisfactory Hydraulic Testing Etc. Complet. Either Underground Or In Vertical Position, As Directed By Engineer - In- Charge32 Mm Dia Medium 1164 Lowering, Laying, Jointing G.I. Pipes And Specials Of Following Class And Dia. Including Conveyance From Stores To Site Of Works, All Labour, Giving Satisfactory Hydraulic Testing Etc. Complet. Either Underground Or In Vertical Position, As Directed By Engineer - In- Charge40 Mm Dia Medium 1165 Lowering, Laying, Jointing G.I. Pipes And Specials Of Following Class And Dia. Including Conveyance From Stores To Site Of Works, All Labour, Giving Satisfactory Hydraulic Testing Etc. Complet. Either Underground Or In Vertical Position, As Directed By Engineer - In- Charge50 Mm Dia Medium 1166 Supplying And Erecting Automatic Control Panel For 3Ph, 415V, Ac Submersibal / Contrifugal Pumpset Upto 6 Hp Consistaing Of Dol Starter Having Relay Range 9-14 Amp S.P.P. Combined Ametuer / Voltameter, Phase Indicating Lump Inclose In Crca Power Coated Vibration Proof Encloser With Ip 54 Protection Control Panel Shoud Offer Singal Phase Reversal Phase Inbalance Etc. ( Similar To Lt Model No.Mug6 / Cat No.Ss97756 ) 1167 Dol Starter - Supplying And Erecting Dol Starter To Operate Squirrel Cage Indication Motor Working On 380-400 V, 3 Ph, 50Hz, With No Volt Coil, Overloadelement With Necessary Materal & Connected To Supply Etc.Com.Starter With Orignal Sheet Steel Encloserup To 7.5 Hp 1168 Dol Starter - Supplying And Erecting Dol Starter To Operate Squirrel Cage Inddication Motor Working On 380-400 V, 3 Ph, 50Hz, With No Volt Coil, Overloadelement With Necessary Materal & Connected To Supply Etc.Com.Starter With Orignal Sheet Steel Encloserup To 10 Hp 1169 F.A.S.D. Starter Supplying And Erecting Fully Automatic Star Delta Starter To Operate-Squirel Cage Inducation Motor Working On 380 -400 V, 3Ph, 50Hz With On Wolt Coil , Overload Element And On Off Push Button With Necessary Material & Connected To Supply Etc Comp.Above7.5 Hp To 12.5 Hp 1170 F.A.S.D. Starter Supplying And Erecting Fully Automatic Star Delta Starter To Operate-Squirel Cage Inducation Motor Working On 380 -400 V, 3Ph, 50Hz With On Wolt Coil , Overload Element And On Off Push Button With Necessary Material & Connected To Supply Etc Comp.Above12.5 Hp To 20 Hp 1171 F.A.S.D. Starter Supplying And Erecting Fully Automatic Star Delta Starter To Operate-Squirel Cage Inducation Motor Working On 380 -400 V, 3Ph, 50Hz With On Wolt Coil , Overload Element And On Off Push Button With Necessary Material & Connected To Supply Etc Comp.Above20 Hp To 25 Hp 1172 F.A.S.D. Starter Supplying And Erecting Fully Automatic Star Delta Starter To Operate-Squirel Cage Inducation Motor Working On 380 -400 V, 3Ph, 50Hz With On Wolt Coil , Overload Element And On Off Push Button With Necessary Material & Connected To Supply Etc Comp.Above25 Hp To 40 Hp 1173 Erthing For Pumping Machinery Supplying And Erecting Earthing With Galvanised Cast Iron Earth Plate Size 60X60x0.6 Cm Complet With All Materials Testing & Recording The Result As Peron Ea-Ep 1174 Providing And Constructing Two Taps Standpost As Paer Type Design With Excavation 15 Cm Thick Pcc ( 1:3:6 ) Bedding 20 Mm Thick Pcc ( 1:2:4 ) Concrete For Platform Of 1.75 M Dia With Side Curd Andbucket Rest 80Mm Dia, Heavy Duty Gi [ O [ E Central Post Duly Filled Therein With C.C. 1175 Refikking Trenches With Available Excavated Stuff With Soft Material Frist Over Pipeline& Then Hard Material In 15 Mm Layers With All Leads & Lifts Including Consiladation, Surcharging Etc. Complete 1176 Providing , Hosting & Fixing In Position Of Approved Make High Density Polythylene Uv Stabilized Conforming To Is 12701 Water Storage Tank With Necessary Connection Testing Etc. Comkplete 9 Prior Approval Of Sample By Ex. Enginner Is Necessary Before Use ) Spect. No. As Directed By Engineer Incharge For 200 To 1000 Lit. 1177 Providing , Hosting & Fixing In Position Of Approved Make High Density Polythylene Uv Stabilized Conforming To Is 12701 Water Storage Tank With Necessary Connection Testing Etc. Comkplete 9 Prior Approval Of Sample By Ex. Enginner Is Necessary Before Use ) Spect. No. As Directed By Engineer Incharge For1000 To 2000 Lit. 1178 Providing Fixing 15 Mm Dia Screw Down Bib Stop Tap Of Brass Including Necessaary Socket Union Nut Complete ( Pwd Csr 17-18 P No. 288 I O. 41.4 1179 Providingand Laying In Trenches Dia Cpvc Pipe Including Necessary Excavation Fitting Reffiling Trenches Etc. Complete Including Removing Existing Pipe Line If The Same In Pwd Chewky Or As Directed Etc. Complete For 15Mm Dai. 1180 Providingand Laying In Trenches Dia Cpvc Pipe Including Necessary Excavation Fitting Reffiling Trenches Etc. Complete Including Removing Existing Pipe Line If The Same In Pwd Chewky Or As Directed Etc. Complete For 20 Mm Dai. 1181 Providingand Laying In Trenches Dia Cpvc Pipe Including Necessary Excavation Fitting Reffiling Trenches Etc. Complete Including Removing Existing Pipe Line If The Same In Pwd Chewky Or As Directed Etc. Complete For 25Mmdai. 1182 Providingand Laying In Trenches Dia Cpvc Pipe Including Necessary Excavation Fitting Reffiling Trenches Etc. Complete Including Removing Existing Pipe Line If The Same In Pwd Chewky Or As Directed Etc. Complete For 32 Mm Dai. 1183 Providingand Laying In Trenches Dia Cpvc Pipe Including Necessary Excavation Fitting Reffiling Trenches Etc. Complete Including Removing Existing Pipe Line If The Same In Pwd Chewky Or As Directed Etc. Complete For 40Mm Dai. 1184 Transformar Opening 160 Kvr - 200 Kvr 1185 Transformer Rewinding 1186 Transformer Dismantling 1187 Transformer Opening And Repairing 1188 Fiber Bush For 160 Kvr Transformer 1189 Fiber Bush For 200 Kvr Transformer 1190 Bush For 160 Kvr Transformer 1191 Bush 200 Kvr Transformer 1192 Stand Nut Set Copper 1193 Copper Stand 8 1194 Fiber Sleeve Meter 1195 Baseplate 160 Kvr 1196 Baseplate 200 Kvr 1197 Insulating Wwire20mm 1198 Connector For 160 Kvr 1199 Connector For 200 Kvr 1200 2Hp Pully Gear For Filter Plant 1201 Gear Box Bearing For 2 Hp Pulley Ggear 1202 Gear Oil 1203 Ss Shoft 32 Mm 1204 Ss Shoft 40 Mm 1205 Sleeve ( Ss ) 32 Mm 1206 Sleeve ( Ss ) 40 Mm 1207 Bush 32 Mm 1208 Bush 40Mm 1209 Bush Opening And Fitting 1210 Startar 3 To 5 Hp 1211 Startar 1 To3 Hp 1212 Union25mm 1213 Union40 Mm 1214 Union50 Mm 1215 Bend25mm 1216 Bend 40 Mm 1217 Bend 50Mm 1218 Nipple25mm 1219 Nipple32m 1220 Nipple40mm 1221 Nipple50mm 1222 Panel Bord 1223 Cap ( Bore Cap ) 1224 Nut Bolt3 1225 Coupling 2 1226 Rubber Sheet 2 1227 11 To 15 Monobloc Motor Rewinding 1228 Bearing 1229 Bush Sheft Celling
BOQ
| Sl. No. | Item Description |
| 1 | Rate Contract for Power Pump, etc. Spare Parts |
| 2 | A 1)India Mark -2 & 3 Hand Pump Repairing Drive out thePipe line with diameter of 65.0 m.m. |
| 3 | A 1)India Mark -2 & 3 Hand Pump Repairing Drive outthePipe line with diameter of 65.0 m.m which fell in borewell. |
| 4 | A 1)India Mark -2 & 3 Hand Pump Repairing Drive out thePipe line with diameter of 32.0 m.m from whichfell in borewell. |
| 5 | A 1)India Mark -2 & 3 Hand Pump Repairing Drive out thePipe line with diameter of 32.0 m.m from in borewell. |
| 6 | B) 1) Repairing of jet Motor Pump & PipelineDrive out inner Pipeline with Jet assembly of JetPump from 1.0 Hp to 5.0 Hp in borewell. |
| 7 | B) 1) Repairing of jet Motor Pump & PipelineTo fit the inner and outer pipeline of the jet Pump in 1.0 Hp to5.0 Hp in borewell. |
| 8 | B) 1) Repairing of jet Motor Pump & Pipeline To insert inner pipeline of Jetpump in borewell.(after repairing.) |
| 9 | B) 1) Repairing of jet Motor Pump & Pipeline To insert inner & outer pipeline of Jetpump in borewell. (after repairing.) |
| 10 | B) 1) Repairing of jet Motor Pump & PipelineTo pull out the Stucked, fell or caught in dreg Pump Set.( Contracter use their own tools.) |
| 11 | B) 1) Repairing of jet Motor Pump & PipelineTo increse or reduse the pipe line of Jet Pump inh well. ( For every 3.0 m. ) |
| 12 | B) 1) Repairing of jet Motor Pump & PipelineTo submit in the officeJet pump, Motor pipeline, starter panel board tin & other assesaries of Laghu Panee Purwatha Yojna in well. |
| 13 | B) 1) Repairing of jet Motor Pump & Pipeline New pump set (Upto 1.0 to 5.0 HP) to fit in well, to give panel wiring arthig test report & start after electric supply. (Z.P. providesPumpset panel, arthing material G.I. wire, plate, pipe andother assesaries.) |
| 14 | B) 1) Repairing of jet Motor Pump & PipelineA) To drive out motor and pump from Jet pump |
| 15 | B) 1) Repairing of jet Motor Pump & PipelineB)To fit1.0 HP to 5.0 HP Jet motor pump. |
| 16 | B) 1) Repairing of jet Motor Pump & Pipeline To rewinding electric motor with copper wire , above rate valid forwithout returning old copper wire, 1.0 HP to 5.0 HP open pump motor rewinding. |
| 17 | B) 1) Repairing of jet Motor Pump & PipelineTo open the Jet motor, over oiling, fitting and testing |
| 18 | B) 1) Repairing of jet Motor Pump & Pipeline Rotor pump shaft turning and polishing. |
| 19 | B) 1) Repairing of jet Motor Pump & PipelineTo make upper and lower bush of baring cover sit and housing of Jet pump. |
| 20 | B) 1) Repairing of jet Motor Pump & PipelineTo test electric pump on site ( transport and with minor repairing) |
| 21 | B) 1) Repairing of jet Motor Pump & PipelineTo repaire panel board & starter of all types motor & Any HP control panel starter minor repairing to fit grif set, rottery swich, contracter plate, ampear meter, volt meter, on-off switch, fuse and minor wiring. |
| 22 | B) 1) Repairing of jet Motor Pump & PipelineStarter panel board main repairing & to fit coilrelay, single phasing preventer water label guard & totle wiring of 1.0 HP to 10.0 Hp pump. |
| 23 | B) 1) Repairing of jet Motor Pump & PipelineStarter panel board main repairing & to fit coilrelay, single phasingpreventer water label guard & totle wiring of 10.0 HP to 30 Hp pump. |
| 24 | B) 1) Repairing of jet Motor Pump & Pipeline Starter panel board main repairing & to fit coilrelay, single phasing preventer water label guard & totle wiring of 31.0 HP to 40 Hp pump. |
| 25 | B) 1) Repairing of jet Motor Pump & PipelineTo remove tin shed flashing of pump if necessary and fit as it is after work. |
| 26 | B) 1) Repairing of jet Motor Pump & Pipeline To remove handpump with pipeline for flashing and insert 10 feet G.I.pipeline towards 32 m.m. dimeter& remove after flashing and fithandpump as it is before. |
| 27 | B) 1) Repairing of jet Motor Pump & Pipeline To remove handpump for capacity test and after testing fit as it is before. |
| 28 | B) 1) Repairing of jet Motor Pump & Pipeline Single phase 1 HP to 2 Hp electric pump capacity test for regular three hour with the help of generator. |
| 29 | C) Spare parts of Jet PumpBearing upper |
| 30 | C) Spare parts of Jet PumpBearing lower |
| 31 | C) Spare parts of Jet PumpImpeller key |
| 32 | C) Spare parts of Jet Pump Pump bush |
| 33 | C) Spare parts of Jet Pump Air fan ( with PVC pin) |
| 34 | C) Spare parts of Jet PumpStand nut kit |
| 35 | C) Spare parts of Jet Pump Nut bolt kit |
| 36 | C) Spare parts of Jet Pump Air cock |
| 37 | C) Spare parts of Jet Pump Pressure regulating volve |
| 38 | C) Spare parts of Jet Pump Pressure regulating difrom |
| 39 | C) Spare parts of Jet PumpBearing plate top / bottom |
| 40 | C) Spare parts of Jet PumpJet assembly packer type full |
| 41 | C) Spare parts of Jet PumpPacker foot volve |
| 42 | C) Spare parts of Jet PumpPacker rubber seal set |
| 43 | C) Spare parts of Jet Pump Packer bucket set |
| 44 | C) Spare parts of Jet Pump Gland rope |
| 45 | C) Spare parts of Jet Pump Rubber packing set |
| 46 | C) Spare parts of Jet Pump Gland rope plate |
| 47 | C) Spare parts of Jet Pump Impeller |
| 48 | D) Other material 1) G. I. coplling heavy duty |
| 49 | D) Other materiali) 32 m.m. |
| 50 | D) Other materialii) 40 m.m. |
| 51 | D) Other material iii) 50 m.m. |
| 52 | D) Other materialiv) 65 m.m. |
| 53 | D) Other materialv) 75 m.m. |
| 54 | D) Other materialvi) 100 m.m. |
| 55 | D) Other materialvii) 125 m.m. |
| 56 | D) Other materialviii) 150 m.m. |
| 57 | D) Other material 2) Bend heavy duty |
| 58 | D) Other material i) 32 m.m. |
| 59 | D) Other material ii) 40 m.m. |
| 60 | D) Other material iii) 50 m.m. |
| 61 | D) Other material iv) 65 m.m. |
| 62 | D) Other material v) 75 m.m. |
| 63 | D) Other materialvi) 100 m.m. |
| 64 | D) Other material vii) 125 m.m. |
| 65 | D) Other material viii) 150 m.m. |
| 66 | D) Other material 3) Foot volve |
| 67 | D) Other material i) 32 m.m. |
| 68 | D) Other materialii) 40 m.m. |
| 69 | D) Other materialiii) 50 m.m. |
| 70 | D) Other material iv) 65 m.m. |
| 71 | D) Other material v) 75 m.m. |
| 72 | D) Other material vi) 100 m.m. |
| 73 | D) Other materialvii) 125 m.m. |
| 74 | D) Other material viii) 150 m.m. |
| 75 | D) Other material 4)Wooden board 3 x 2 f x ½ “ |
| 76 | D) Other material 5) Iron box 18 guage tin 3f x 2f x 1f |
| 77 | D) Other material 6) G.I.Pipe 1½“ / 1¼ “ cutting threding |
| 78 | D) Other material 7) G.I.Pipe 2“ cutting threding |
| 79 | D) Other material 8) G.I.Pipe 2½“ / 3 “ cutting threding |
| 80 | E)Submersible Pump Repairing Motor rewinding with copper wire Aove Rate mension without returned old copper wire1.0 HP to 3.5 HP |
| 81 | E)Submersible Pump Repairing Motor rewinding with copper wire Aove Rate mension without returned old copper wire 4.0 HP to 5.0 HP |
| 82 | E)Submersible Pump Repairing Motor rewinding with copper wire Aove Rate mension without returned old copper wire 6.0 HP to 10.0 HP |
| 83 | E)Submersible Pump Repairing Motor rewinding with copper wire Aove Rate mension without returned old copper wire 11.0 HP to 15.0 HP |
| 84 | E)Submersible Pump Repairing Motor rewinding with copper wire Aove Rate mension without returned old copper wire 16.0 HP to 20.0 HP |
| 85 | E)Submersible Pump Repairing Motor rewinding with copper wire Aove Rate mension without returned old copper wire 21.0 HP to 30.0 HP |
| 86 | E)Submersible Pump Repairing Motor rewinding with copper wire Aove Rate mension without returned old copper wire 31.0 HP to 50.0 HP |
| 87 | E)Submersible Pump Repairing Motor rewinding with copper wire Aove Rate mension without returned old copper wire 51.0 HP to 70.0 HP |
| 88 | E)Submersible Pump Repairing Motor rewinding with copper wire Aove Rate mension without returned old copper wire 71.0 HP to 90.0 HP |
| 89 | F) To Remove Motor Pump Set with Pipelinefrom well1 HP to 6.0 HP |
| 90 | F) To Remove Motor Pump Set with Pipelinefrom well 7.0 HP to 15 HP |
| 91 | F) To Remove Motor Pump Set with Pipelinefrom well16.0 HP to 30.0 HP |
| 92 | F) To Remove Motor Pump Set with Pipelinefrom well31.0 HP to 50.0 HP |
| 93 | F) To Remove Motor Pump Set with Pipelinefrom well 51.0 HP to 70.0 HP |
| 94 | F) To Remove Motor Pump Set with Pipelinefrom well71.0 HP to 90.0 HP |
| 95 | G) To pull out the Stucked, fell or caught in dreg Pump Set with pipelinefrom well 1 HP to 6.0 HP |
| 96 | G) To pull out the Stucked, fell or caught in dreg Pump Set with pipelinefrom well7.0 HP to 15 HP |
| 97 | G) To pull out the Stucked, fell or caught in dreg Pump Set with pipelinefrom well 16.0 HP to 30.0 HP |
| 98 | G) To pull out the Stucked, fell or caught in dreg Pump Set with pipelinefrom well 31.0 HP to 50.0 HP |
| 99 | G) To pull out the Stucked, fell or caught in dreg Pump Set with pipelinefrom well51.0 HP to 70.0 HP |
| 100 | G) To pull out the Stucked, fell or caught in dreg Pump Set with pipelinefrom well 71.0 HP to 90.0 HP |
| 101 | H) To fit motor pump in well with pipe line 1 HP to 6.0 HP |
| 102 | H) To fit motor pump in well with pipe line 7.0 HP to 15 HP |
| 103 | H) To fit motor pump in well with pipe line16.0 HP to 30.0 HP |
| 104 | H) To fit motor pump in well with pipe line 31.0 HP to 50.0 HP |
| 105 | H) To fit motor pump in well with pipe line 51.0 HP to 70. HP |
| 106 | H) To fit motor pump in well with pipe line 71.0 HP to 90.0 HP |
| 107 | I) To increase or reduse pipeline of subnercible pump in wellRate 3 meter / per pipe1 HP to 5.0 HP |
| 108 | I) To increase or reduse pipeline of subnercible pump in wellRate 3 meter / per pipe6.0 HP to 15 HP |
| 109 | I) To increase or reduse pipeline of subnercible pump in wellRate 3 meter / per pipe 16.0 HP to 30.0 HP |
| 110 | I) To increase or reduse pipeline of subnercible pump in wellRate 3 meter / per pipe31.0 HP to 50.0 HP |
| 111 | I) To increase or reduse pipeline of subnercible pump in wellRate 3 meter / per pipe51.0 HP to 70.0 HP |
| 112 | I) To increase or reduse pipeline of subnercible pump in wellRate 3 meter / per pipe 71.0 HP to 90.0 HP |
| 113 | J) To submit in the officeJet pump, Motor pipeline, starter panel board tin & other assesaries of Laghu Panee Purwatha Yojna in well1 HP to 7.5 HP |
| 114 | J) To submit in the officeJet pump, Motor pipeline, starter panel board tin & other assesaries of Laghu Panee Purwatha Yojna in well 8.5 HP to 15 HP |
| 115 | J) To submit in the officeJet pump, Motor pipeline, starter panel board tin & other assesaries of Laghu Panee Purwatha Yojna in well 16.0 HP to 30.0 HP |
| 116 | J) To submit in the officeJet pump, Motor pipeline, starter panel board tin & other assesaries of Laghu Panee Purwatha Yojna in well31.0 HP to 50. HP |
| 117 | J) To submit in the officeJet pump, Motor pipeline, starter panel board tin & other assesaries of Laghu Panee Purwatha Yojna in well 51.0 HP to 70. HP |
| 118 | J) To submit in the officeJet pump, Motor pipeline, starter panel board tin & other assesaries of Laghu Panee Purwatha Yojna in well 71.0 HP to 90.0 HP |
| 119 | K) New pump set (Upto 1.0 to 5.0 HP) to fit in well, to give panel wiring arthig test report & start after electric supply. (Z.P. provides Pumpset panel, arthing material G.I. wire, plate, pipe and other assesaries.)1 HP to 7.5 HP |
| 120 | K) New pump set (Upto 1.0 to 5.0 HP) to fit in well, to give panel wiring arthig test report & start after electric supply. (Z.P. provides Pumpset panel, arthing material G.I. wire, plate, pipe and other assesaries.)8.5 HP to 15 HP |
| 121 | K) New pump set (Upto 1.0 to 5.0 HP) to fit in well, to give panel wiring arthig test report & start after electric supply. (Z.P. provides Pumpset panel, arthing material G.I. wire, plate, pipe and other assesaries.)16.0 HP to 30.0 HP |
| 122 | K) New pump set (Upto 1.0 to 5.0 HP) to fit in well, to give panel wiring arthig test report & start after electric supply. (Z.P. provides Pumpset panel, arthing material G.I. wire, plate, pipe and other assesaries.) 31 HP to 50. HP |
| 123 | K) New pump set (Upto 1.0 to 5.0 HP) to fit in well, to give panel wiring arthig test report & start after electric supply. (Z.P. provides Pumpset panel, arthing material G.I. wire, plate, pipe and other assesaries.) 51.0 HP to 70.0 HP |
| 124 | K) New pump set (Upto 1.0 to 5.0 HP) to fit in well, to give panel wiring arthig test report & start after electric supply. (Z.P. provides Pumpset panel, arthing material G.I. wire, plate, pipe and other assesaries.)71.0 HP to 90.0 HP |
| 125 | L) To open sub motor, repairing, fitting and testing. 1 HP to 7.5 HP |
| 126 | L) To open sub motor, repairing, fitting and testing. 8.5 HP to 15 HP |
| 127 | L) To open sub motor, repairing, fitting and testing. 16.0 HP to 30.0 HP |
| 128 | L) To open sub motor, repairing, fitting and testing. 31.0 HP to 50.0 HP |
| 129 | L) To open sub motor, repairing, fitting and testing. 51.0 HP to 70.0 HP |
| 130 | L) To open sub motor, repairing, fitting and testing. 71.0 HP to 90.0 HP |
| 131 | M) To open sub pump, repairing, fitting and testing.1 HP to 7.5 HP |
| 132 | M) To open sub pump, repairing, fitting and testing. 8.5 HP to 15 HP |
| 133 | M) To open sub pump, repairing, fitting and testing. 16.0 HP to 30.0 HP |
| 134 | M) To open sub pump, repairing, fitting and testing.31.0 HP to 50.0 HP |
| 135 | M) To open sub pump, repairing, fitting and testing. 51.0 HP to 70.0 HP |
| 136 | M) To open sub pump, repairing, fitting and testing. 71.0 HP to 90.0 HP |
| 137 | N) To repaire sub motor and sub pumpTo sub motor / pump bush fitting per |
| 138 | N) To repaire sub motor and sub pumpDamage stater repairing |
| 139 | N) To repaire sub motor and sub pump Rotor shaft turning and polishing |
| 140 | N) To repaire sub motor and sub pump Damage roter repairing (Rewinding) |
| 141 | N) To repaire sub motor and sub pumpSub pump shaft turning & polishing |
| 142 | N) To repaire sub motor and sub pump To joint cable with kit |
| 143 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" i) Sub motor bush |
| 144 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" ii) sub pump bush |
| 145 | O) Sub motor & sub pump spare parts1 to 5 HP 4\"Thirst bearing block |
| 146 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Thirst bearing full |
| 147 | O) Sub motor & sub pump spare parts1 to 5 HP 4\"Block |
| 148 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Ring |
| 149 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Upper stage casing |
| 150 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Lower stage casing |
| 151 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Middle stage casing |
| 152 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" i) Impeller |
| 153 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" ii) Brass Impeller |
| 154 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Neckring |
| 155 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Defuser |
| 156 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Pump key |
| 157 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Rubber parts kit |
| 158 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Submotor base |
| 159 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Stenner |
| 160 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Male- Female bush |
| 161 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Male- Famale key |
| 162 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" NRV stage casing |
| 163 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Stud big |
| 164 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" HP Stud small |
| 165 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Motor bush housing |
| 166 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" i) Upper |
| 167 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" ii) Lower |
| 168 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" Alen screw |
| 169 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" SS Sleevemotor /pump |
| 170 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" SS Sleeve cover |
| 171 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" i) Sub motor bush |
| 172 | O) Sub motor & sub pump spare parts1 to 5 HP 4\" ii) sub pump bush |
| 173 | O) Sub motor & sub pump spare parts3 to 7.5 HPThirst bearing block |
| 174 | O) Sub motor & sub pump spare parts3 to 7.5 HP Thirst bearing full |
| 175 | O) Sub motor & sub pump spare parts3 to 7.5 HP Block |
| 176 | O) Sub motor & sub pump spare parts3 to 7.5 HP Ring |
| 177 | O) Sub motor & sub pump spare parts3 to 7.5 HP Upper stage casing |
| 178 | O) Sub motor & sub pump spare parts3 to 7.5 HP Lower stage casing |
| 179 | O) Sub motor & sub pump spare parts3 to 7.5 HP Middle stage casing |
| 180 | O) Sub motor & sub pump spare parts3 to 7.5 HPi) Impeller |
| 181 | O) Sub motor & sub pump spare parts3 to 7.5 HPii) Brass Impeller |
| 182 | O) Sub motor & sub pump spare parts3 to 7.5 HP Neckring |
| 183 | O) Sub motor & sub pump spare parts3 to 7.5 HP Defuser |
| 184 | O) Sub motor & sub pump spare parts3 to 7.5 HP Pump key |
| 185 | O) Sub motor & sub pump spare parts3 to 7.5 HP Rubber parts kit |
| 186 | O) Sub motor & sub pump spare parts3 to 7.5 HP Submotor base |
| 187 | O) Sub motor & sub pump spare parts3 to 7.5 HP Stenner |
| 188 | O) Sub motor & sub pump spare parts3 to 7.5 HPMale- Female bush |
| 189 | O) Sub motor & sub pump spare parts3 to 7.5 HP Male- Famale key |
| 190 | O) Sub motor & sub pump spare parts3 to 7.5 HP NRV stage casing |
| 191 | O) Sub motor & sub pump spare parts3 to 7.5 HP Stud big |
| 192 | O) Sub motor & sub pump spare parts3 to 7.5 HP Stud small |
| 193 | O) Sub motor & sub pump spare parts3 to 7.5 HPMotor bush housing |
| 194 | O) Sub motor & sub pump spare parts3 to 7.5 HPi) Upper |
| 195 | O) Sub motor & sub pump spare parts3 to 7.5 HPii) Lower |
| 196 | O) Sub motor & sub pump spare parts3 to 7.5 HP Alen screw |
| 197 | O) Sub motor & sub pump spare parts3 to 7.5 HP SS Sleevemotor /pump |
| 198 | O) Sub motor & sub pump spare parts3 to 7.5 HPSS Sleeve cover |
| 199 | O) Sub motor & sub pump spare parts8 to 15 HPi) Sub motor bush |
| 200 | O) Sub motor & sub pump spare parts8 to 15 HP ii) sub pump bush |
| 201 | O) Sub motor & sub pump spare parts8 to 15 HPThirst bearing block |
| 202 | O) Sub motor & sub pump spare parts8 to 15 HP Thirst bearing full |
| 203 | O) Sub motor & sub pump spare parts8 to 15 HP Block |
| 204 | O) Sub motor & sub pump spare parts8 to 15 HP Ring |
| 205 | O) Sub motor & sub pump spare parts8 to 15 HP Upper stage casing |
| 206 | O) Sub motor & sub pump spare parts8 to 15 HP Lower stage casing |
| 207 | O) Sub motor & sub pump spare parts8 to 15 HP Middle stage casing |
| 208 | O) Sub motor & sub pump spare parts8 to 15 HPi) Impeller |
| 209 | O) Sub motor & sub pump spare parts8 to 15 HPii) Brass Impeller |
| 210 | O) Sub motor & sub pump spare parts8 to 15 HP Neckring |
| 211 | O) Sub motor & sub pump spare parts8 to 15 HP Defuser |
| 212 | O) Sub motor & sub pump spare parts8 to 15 HP Pump key |
| 213 | O) Sub motor & sub pump spare parts8 to 15 HP Rubber parts kit |
| 214 | O) Sub motor & sub pump spare parts8 to 15 HP Submotor base |
| 215 | O) Sub motor & sub pump spare parts8 to 15 HP Stenner |
| 216 | O) Sub motor & sub pump spare parts8 to 15 HPMale- Female bush |
| 217 | O) Sub motor & sub pump spare parts8 to 15 HP Male- Famale key |
| 218 | O) Sub motor & sub pump spare parts8 to 15 HP NRV stage casing |
| 219 | O) Sub motor & sub pump spare parts8 to 15 HP Stud big |
| 220 | O) Sub motor & sub pump spare parts8 to 15 HP Stud small |
| 221 | O) Sub motor & sub pump spare parts8 to 15 HPMotor bush housing |
| 222 | O) Sub motor & sub pump spare parts8 to 15 HPi) Upper |
| 223 | O) Sub motor & sub pump spare parts8 to 15 HPii) Lower |
| 224 | O) Sub motor & sub pump spare parts8 to 15 HP Alen screw |
| 225 | O) Sub motor & sub pump spare parts8 to 15 HP SS Sleevemotor /pump |
| 226 | O) Sub motor & sub pump spare parts8 to 15 HPSS Sleeve cover |
| 227 | O) Sub motor & sub pump spare parts16 to30 HPi) Sub motor bush |
| 228 | O) Sub motor & sub pump spare parts16 to30 HP ii) sub pump bush |
| 229 | O) Sub motor & sub pump spare parts16 to30 HPThirst bearing block |
| 230 | O) Sub motor & sub pump spare parts16 to30 HP Thirst bearing full |
| 231 | O) Sub motor & sub pump spare parts16 to30 HP Block |
| 232 | O) Sub motor & sub pump spare parts16 to30 HP Ring |
| 233 | O) Sub motor & sub pump spare parts16 to30 HP Upper stage casing |
| 234 | O) Sub motor & sub pump spare parts16 to30 HP Lower stage casing |
| 235 | O) Sub motor & sub pump spare parts16 to30 HP Middle stage casing |
| 236 | O) Sub motor & sub pump spare parts16 to30 HPi) Impeller |
| 237 | O) Sub motor & sub pump spare parts16 to30 HPii) Brass Impeller |
| 238 | O) Sub motor & sub pump spare parts16 to30 HP Neckring |
| 239 | O) Sub motor & sub pump spare parts16 to30 HP Defuser |
| 240 | O) Sub motor & sub pump spare parts16 to30 HP Pump key |
| 241 | O) Sub motor & sub pump spare parts16 to30 HP Rubber parts kit |
| 242 | O) Sub motor & sub pump spare parts16 to30 HP Submotor base |
| 243 | O) Sub motor & sub pump spare parts16 to30 HP Stenner |
| 244 | O) Sub motor & sub pump spare parts16 to30 HPMale- Female bush |
| 245 | O) Sub motor & sub pump spare parts16 to30 HP Male- Famale key |
| 246 | O) Sub motor & sub pump spare parts16 to30 HP NRV stage casing |
| 247 | O) Sub motor & sub pump spare parts16 to30 HP Stud big |
| 248 | O) Sub motor & sub pump spare parts16 to30 HP Stud small |
| 249 | O) Sub motor & sub pump spare parts16 to30 HPMotor bush housing |
| 250 | O) Sub motor & sub pump spare parts16 to30 HPi) Upper |
| 251 | O) Sub motor & sub pump spare parts16 to30 HPii) Lower |
| 252 | O) Sub motor & sub pump spare parts16 to30 HP Alen screw |
| 253 | O) Sub motor & sub pump spare parts16 to30 HP SS Sleevemotor /pump |
| 254 | O) Sub motor & sub pump spare parts16 to30 HPSS Sleeve cover |
| 255 | O) Sub motor & sub pump spare parts31 to 50 HPi) Sub motor bush |
| 256 | O) Sub motor & sub pump spare parts31 to 50 HP ii) sub pump bush |
| 257 | O) Sub motor & sub pump spare parts31 to 50 HPThirst bearing block |
| 258 | O) Sub motor & sub pump spare parts31 to 50 HP Thirst bearing full |
| 259 | O) Sub motor & sub pump spare parts31 to 50 HP Block |
| 260 | O) Sub motor & sub pump spare parts31 to 50 HP Ring |
| 261 | O) Sub motor & sub pump spare parts31 to 50 HP Upper stage casing |
| 262 | O) Sub motor & sub pump spare parts31 to 50 HP Lower stage casing |
| 263 | O) Sub motor & sub pump spare parts31 to 50 HP Middle stage casing |
| 264 | O) Sub motor & sub pump spare parts31 to 50 HPi) Impeller |
| 265 | O) Sub motor & sub pump spare parts31 to 50 HPii) Brass Impeller |
| 266 | O) Sub motor & sub pump spare parts31 to 50 HP Neckring |
| 267 | O) Sub motor & sub pump spare parts31 to 50 HP Defuser |
| 268 | O) Sub motor & sub pump spare parts31 to 50 HP Pump key |
| 269 | O) Sub motor & sub pump spare parts31 to 50 HP Rubber parts kit |
| 270 | O) Sub motor & sub pump spare parts31 to 50 HP Submotor base |
| 271 | O) Sub motor & sub pump spare parts31 to 50 HP Stenner |
| 272 | O) Sub motor & sub pump spare parts31 to 50 HPMale- Female bush |
| 273 | O) Sub motor & sub pump spare parts31 to 50 HP Male- Famale key |
| 274 | O) Sub motor & sub pump spare parts31 to 50 HP NRV stage casing |
| 275 | O) Sub motor & sub pump spare parts31 to 50 HP Stud big |
| 276 | O) Sub motor & sub pump spare parts31 to 50 HP Stud small |
| 277 | O) Sub motor & sub pump spare parts31 to 50 HPMotor bush housing |
| 278 | O) Sub motor & sub pump spare parts31 to 50 HPi) Upper |
| 279 | O) Sub motor & sub pump spare parts31 to 50 HPii) Lower |
| 280 | O) Sub motor & sub pump spare parts31 to 50 HP Alen screw |
| 281 | O) Sub motor & sub pump spare parts31 to 50 HP SS Sleevemotor /pump |
| 282 | O) Sub motor & sub pump spare parts31 to 50 HPSS Sleeve cover |
| 283 | O) Sub motor & sub pump spare parts51 to 70 HPi) Sub motor bush |
| 284 | O) Sub motor & sub pump spare parts51 to 70 HP ii) sub pump bush |
| 285 | O) Sub motor & sub pump spare parts51 to 70 HPThirst bearing block |
| 286 | O) Sub motor & sub pump spare parts51 to 70 HP Thirst bearing full |
| 287 | O) Sub motor & sub pump spare parts51 to 70 HP Block |
| 288 | O) Sub motor & sub pump spare parts51 to 70 HP Ring |
| 289 | O) Sub motor & sub pump spare parts51 to 70 HP Upper stage casing |
| 290 | O) Sub motor & sub pump spare parts51 to 70 HP Lower stage casing |
| 291 | O) Sub motor & sub pump spare parts51 to 70 HP Middle stage casing |
| 292 | O) Sub motor & sub pump spare parts51 to 70 HPi) Impeller |
| 293 | O) Sub motor & sub pump spare parts51 to 70 HPii) Brass Impeller |
| 294 | O) Sub motor & sub pump spare parts51 to 70 HP Neckring |
| 295 | O) Sub motor & sub pump spare parts51 to 70 HP Defuser |
| 296 | O) Sub motor & sub pump spare parts51 to 70 HP Pump key |
| 297 | O) Sub motor & sub pump spare parts51 to 70 HP Rubber parts kit |
| 298 | O) Sub motor & sub pump spare parts51 to 70 HP Submotor base |
| 299 | O) Sub motor & sub pump spare parts51 to 70 HP Stenner |
| 300 | O) Sub motor & sub pump spare parts51 to 70 HPMale- Female bush |
| 301 | O) Sub motor & sub pump spare parts51 to 70 HP Male- Famale key |
| 302 | O) Sub motor & sub pump spare parts51 to 70 HP NRV stage casing |
| 303 | O) Sub motor & sub pump spare parts51 to 70 HP Stud big |
| 304 | O) Sub motor & sub pump spare parts51 to 70 HP Stud small |
| 305 | O) Sub motor & sub pump spare parts51 to 70 HPMotor bush housing |
| 306 | O) Sub motor & sub pump spare parts51 to 70 HPi) Upper |
| 307 | O) Sub motor & sub pump spare parts51 to 70 HPii) Lower |
| 308 | O) Sub motor & sub pump spare parts51 to 70 HP Alen screw |
| 309 | O) Sub motor & sub pump spare parts51 to 70 HP SS Sleevemotor /pump |
| 310 | O) Sub motor & sub pump spare parts51 to 70 HPSS Sleeve cover |
| 311 | O) Sub motor & sub pump spare parts71 to 90 HPi) Sub motor bush |
| 312 | O) Sub motor & sub pump spare parts71 to 90 HP ii) sub pump bush |
| 313 | O) Sub motor & sub pump spare parts71 to 90 HPThirst bearing block |
| 314 | O) Sub motor & sub pump spare parts71 to 90 HP Thirst bearing full |
| 315 | O) Sub motor & sub pump spare parts71 to 90 HP Block |
| 316 | O) Sub motor & sub pump spare parts71 to 90 HP Ring |
| 317 | O) Sub motor & sub pump spare parts71 to 90 HP Upper stage casing |
| 318 | O) Sub motor & sub pump spare parts71 to 90 HP Lower stage casing |
| 319 | O) Sub motor & sub pump spare parts71 to 90 HP Middle stage casing |
| 320 | O) Sub motor & sub pump spare parts71 to 90 HPi) Impeller |
| 321 | O) Sub motor & sub pump spare parts71 to 90 HPii) Brass Impeller |
| 322 | O) Sub motor & sub pump spare parts71 to 90 HP Neckring |
| 323 | O) Sub motor & sub pump spare parts71 to 90 HP Defuser |
| 324 | O) Sub motor & sub pump spare parts71 to 90 HP Pump key |
| 325 | O) Sub motor & sub pump spare parts71 to 90 HP Rubber parts kit |
| 326 | O) Sub motor & sub pump spare parts71 to 90 HP Submotor base |
| 327 | O) Sub motor & sub pump spare parts71 to 90 HP Stenner |
| 328 | O) Sub motor & sub pump spare parts71 to 90 HPMale- Female bush |
| 329 | O) Sub motor & sub pump spare parts71 to 90 HP Male- Famale key |
| 330 | O) Sub motor & sub pump spare parts71 to 90 HP NRV stage casing |
| 331 | O) Sub motor & sub pump spare parts71 to 90 HP Stud big |
| 332 | O) Sub motor & sub pump spare parts71 to 90 HP Stud small |
| 333 | O) Sub motor & sub pump spare parts71 to 90 HPMotor bush housing |
| 334 | O) Sub motor & sub pump spare parts71 to 90 HPi) Upper |
| 335 | O) Sub motor & sub pump spare parts71 to 90 HPii) Lower |
| 336 | O) Sub motor & sub pump spare parts71 to 90 HP Alen screw |
| 337 | O) Sub motor & sub pump spare parts71 to 90 HP SS Sleevemotor /pump |
| 338 | O) Sub motor & sub pump spare parts71 to 90 HPSS Sleeve cover |
| 339 | 1)Three ply coreflat flexible submercible cable i) 1.5 sq.m.m. |
| 340 | 1)Three ply coreflat flexible submercible cable ii) 2.5 sq.m.m. |
| 341 | 1)Three ply coreflat flexible submercible cable iii) 4 sq.m.m. |
| 342 | 1)Three ply coreflat flexible submercible cable iv) 6 sq.m.m. |
| 343 | 1)Three ply coreflat flexible submercible cable v) 10 sq.m.m. |
| 344 | 1)Three ply coreflat flexible submercible cable vi) 16 sq.m.m. |
| 345 | 1)Three ply coreflat flexible submercible cable vii) 25 sq.m.m. |
| 346 | Arm cable i) 1.00 sq.m.m. |
| 347 | Arm cable ii) 1.50 sq.m.m. |
| 348 | Arm cable iii) 2.50 sq.m.m. |
| 349 | Arm cable iv) 4.00 sq.m.m. |
| 350 | Arm cable v) 6.00 sq.m.m. |
| 351 | Arm cable vi) 10.00 sq.m.m. |
| 352 | Arm cable vii) 16.00 sq.m.m. |
| 353 | Arm cable viii) 25.00 sq.m.m. |
| 354 | Arm cable ix) 35.00 sq.m.m. |
| 355 | Arm cable x) 50.00 sq.m.m. |
| 356 | Copper wire P.V.C. insulated & P.V.C. coated i) 3/20 |
| 357 | Copper wire P.V.C. insulated & P.V.C. coated ii) 7/20 |
| 358 | Copper wire P.V.C. insulated & P.V.C. coated iii) 7/16 |
| 359 | New Pump Shaft i) 1.5 HP to 6 HP |
| 360 | New Pump Shaft ii) 7.5 HP to 15 HP |
| 361 | New Pump Shaft iii) 16 HP to 30 HP |
| 362 | New Pump Shaft iv) 31 HP to 50 HP |
| 363 | New Pump Shaft v) 51 HP to 70 HP |
| 364 | New Pump Shaft vi) 71 HP to 90 HP |
| 365 | Borewell Protecting Plate |
| 366 | Borewell Protecting Cover |
| 367 | P)25.0 HP to 40 HP V.T. Motor pump set repairing Drive out V.T. Motor from well |
| 368 | P)25.0 HP to 40 HP V.T. Motor pump set repairing V.T. Pump fit in well |
| 369 | P)25.0 HP to 40 HP V.T. Motor pump set repairing Drive out colume assembly with pipeline from well |
| 370 | P)25.0 HP to 40 HP V.T. Motor pump set repairing To fit colume assembly with pipeline in well |
| 371 | P)25.0 HP to 40 HP V.T. Motor pump set repairing To open V.T. Motor |
| 372 | P)25.0 HP to 40 HP V.T. Motor pump set repairing V.T. Motor fitting & testing |
| 373 | P)25.0 HP to 40 HP V.T. Motor pump set repairing Bowl assembly fitting & testing |
| 374 | P)25.0 HP to 40 HP V.T. Motor pump set repairing To open bowl assembly |
| 375 | P)25.0 HP to 40 HP V.T. Motor pump set repairing V.T. Pump rewinding with copper wire. Withoutreturning old copper wire |
| 376 | P) Allignment checking & repairingi) Line shaft |
| 377 | P) Allignment checking & repairingii) Colume pipe |
| 378 | P) Allignment checking & repairingiii) Oil tube |
| 379 | P) Cutting & Threading i) Line shaft (R.H./L.H) |
| 380 | P) Cutting & Threading ii) Colume pipe (R.H./L.H) |
| 381 | P) Cutting & Threading iii) Oil tube (R.H./L.H) |
| 382 | P) To fit new flage, threading coller, welding,nutboltin colume pipe |
| 383 | P)41.0 HP to 65 HP V.T. Motor pump set repairing Drive out V.T. Motor from well |
| 384 | P)41.0 HP to 65 HP V.T. Motor pump set repairing V.T. Pump fit in well |
| 385 | P)41.0 HP to 65 HP V.T. Motor pump set repairing Drive out colume assembly with pipeline from well |
| 386 | P)41.0 HP to 65 HP V.T. Motor pump set repairing To fit colume assembly with pipeline in well |
| 387 | P)41.0 HP to 65 HP V.T. Motor pump set repairing To open V.T. Motor |
| 388 | P)41.0 HP to 65 HP V.T. Motor pump set repairing V.T. Motor fitting & testing |
| 389 | P)41.0 HP to 65 HP V.T. Motor pump set repairing Bowl assembly fitting & testing |
| 390 | P)41.0 HP to 65 HP V.T. Motor pump set repairing To open bowl assembly |
| 391 | P)41.0 HP to 65 HP V.T. Motor pump set repairing V.T. Pump rewinding with copper wire. Withoutreturning old copper wire |
| 392 | P) Allignment checking & repairingi) Line shaft |
| 393 | P) Allignment checking & repairingii) Colume pipe |
| 394 | P) Allignment checking & repairingiii) Oil tube |
| 395 | P) Cutting & Threading i) Line shaft (R.H./L.H) |
| 396 | P) Cutting & Threading ii) Colume pipe (R.H./L.H) |
| 397 | P) Cutting & Threading iii) Oil tube (R.H./L.H) |
| 398 | P) To fit new flage, threading coller, welding,nutboltin colume pipe |
| 399 | P)66.0 HP to 90 HP V.T. Motor pump set repairing Drive out V.T. Motor from well |
| 400 | P)66.0 HP to 90 HP V.T. Motor pump set repairing V.T. Pump fit in well |
| 401 | P)66.0 HP to 90 HP V.T. Motor pump set repairing Drive out colume assembly with pipeline from well |
| 402 | P)66.0 HP to 90 HP V.T. Motor pump set repairing To fit colume assembly with pipeline in well |
| 403 | P)66.0 HP to 90 HP V.T. Motor pump set repairing To open V.T. Motor |
| 404 | P)66.0 HP to 90 HP V.T. Motor pump set repairing V.T. Motor fitting & testing |
| 405 | P)66.0 HP to 90 HP V.T. Motor pump set repairing Bowl assembly fitting & testing |
| 406 | P)66.0 HP to 90 HP V.T. Motor pump set repairing To open bowl assembly |
| 407 | P)66.0 HP to 90 HP V.T. Motor pump set repairing V.T. Pump rewinding with copper wire. Withoutreturning old copper wire |
| 408 | P) Allignment checking & repairingi) Line shaft |
| 409 | P) Allignment checking & repairingii) Colume pipe |
| 410 | P) Allignment checking & repairingiii) Oil tube |
| 411 | P) Cutting & Threading i) Line shaft (R.H./L.H) |
| 412 | P) Cutting & Threading ii) Colume pipe (R.H./L.H) |
| 413 | P) Cutting & Threading iii) Oil tube (R.H./L.H) |
| 414 | P) To fit new flage, threading coller, welding,nutboltin colume pipe |
| 415 | Q)25 HP to 40 HP V.T. Pum Spare Part ForV.T. Motor baringi) Upper |
| 416 | V.T. Motor baring ii) Lower |
| 417 | Q)25 HP to 40 HP V.T. Pum Spare Part For PDischarge & sectioncase Baring bush gun metal |
| 418 | Q)25 HP to 40 HP V.T. Pum Spare Part For Water seal (Oil water separater) |
| 419 | Q)25 HP to 40 HP V.T. Pum Spare Part For Line Shaft |
| 420 | Q)25 HP to 40 HP V.T. Pum Spare Part ForOil Tube |
| 421 | Q)25 HP to 40 HP V.T. Pum Spare Part For T.T. Plate cast iron |
| 422 | Q)25 HP to 40 HP V.T. Pum Spare Part For Brain rubber bush (spider) |
| 423 | Q)25 HP to 40 HP V.T. Pum Spare Part ForNet (cast iron) |
| 424 | Q)25 HP to 40 HP V.T. Pum Spare Part For Nut bolt ¾“ x 2 “ |
| 425 | Q)25 HP to 40 HP V.T. Pum Spare Part For Nut bolt ¾“ x 6 “ |
| 426 | Q)25 HP to 40 HP V.T. Pum Spare Part For Rubber Shit |
| 427 | Q)25 HP to 40 HP V.T. Pum Spare Part For T.T. Plate Bush |
| 428 | Q)25 HP to 40 HP V.T. Pum Spare Part For Neck Ring (Gun Metal) |
| 429 | Q)25 HP to 40 HP V.T. Pum Spare Part For Impelole(Gun Metal) |
| 430 | Q)25 HP to 40 HP V.T. Pum Spare Part For Browl assembly casing |
| 431 | Q)25 HP to 40 HP V.T. Pum Spare Part For6” colume pipe M.s. |
| 432 | Q)25 HP to 40 HP V.T. Pum Spare Part For 8” colume pipe M.s. |
| 433 | Transformer Oil |
| 434 | Q)25 HP to 40 HP V.T. Pum Spare Part For Pump Colet |
| 435 | Shaft Tube Oil 10 no. |
| 436 | Q)25 HP to 40 HP V.T. Pum Spare Part ForImpeller pump shaft |
| 437 | Q)25 HP to 40 HP V.T. Pum Spare Part For Litern Ring |
| 438 | Q)25 HP to 40 HP V.T. Pum Spare Part For Gide spider |
| 439 | Q)25 HP to 40 HP V.T. Pum Spare Part For Colume Pipe coplling |
| 440 | Q)25 HP to 40 HP V.T. Pum Spare Part For Line shaft coplling |
| 441 | Oil tube baring |
| 442 | Q)25 HP to 40 HP V.T. Pum Spare Part For Glad nut |
| 443 | Q)25 HP to 40 HP V.T. Pum Spare Part For Top Oil Tube |
| 444 | Q)25 HP to 40 HP V.T. Pum Spare Part For Spider Baring Bush |
| 445 | Q)25 HP to 40 HP V.T. Pum Spare Part For Guide Spider Rubber Bush with Sirclip |
| 446 | Q)25 HP to 40 HP V.T. Pum Spare Part For Rubber Bush/ Baring |
| 447 | Q)25 HP to 40 HP V.T. Pum Spare Part ForLine Shaft Slive S.S. |
| 448 | Q)25 HP to 40 HP V.T. Pum Spare Part For Water Lubricating Tube |
| 449 | Q)25 HP to 40 HP V.T. Pum Spare Part For Stuffing Box Bush & with gaskit |
| 450 | Q)25 HP to 40 HP V.T. Pum Spare Part For Stuffing Box Baring |
| 451 | Q)25 HP to 40 HP V.T. Pum Spare Part For Latern Ring |
| 452 | Q)25 HP to 40 HP V.T. Pum Spare Part For Sole Plate |
| 453 | Q)25 HP to 40 HP V.T. Pum Spare Part For Base Plate |
| 454 | Q)25 HP to 40 HP V.T. Pum Spare Part For Water Deflector |
| 455 | Q)41 HP to 65 HP V.T. Pum Spare Part ForV.T. Motor baringi) Upper |
| 456 | V.T. Motor baring ii) Lower |
| 457 | Q)41 HP to 65 HP V.T. Pum Spare Part For PDischarge & sectioncase Baring bush gun metal |
| 458 | Q)41 HP to 65 HP V.T. Pum Spare Part For Water seal (Oil water separater) |
| 459 | Q)41 HP to 65 HP V.T. Pum Spare Part For Line Shaft |
| 460 | Q)41 HP to 65 HP V.T. Pum Spare Part ForOil Tube |
| 461 | Q)41 HP to 65 HP V.T. Pum Spare Part For T.T. Plate cast iron |
| 462 | Q)41 HP to 65 HP V.T. Pum Spare Part For Brain rubber bush (spider) |
| 463 | Q)41 HP to 65 HP V.T. Pum Spare Part ForNet (cast iron) |
| 464 | Q)41 HP to 65 HP V.T. Pum Spare Part For Nut bolt ¾“ x 2 “ |
| 465 | Q)41 HP to 65 HP V.T. Pum Spare Part For Nut bolt ¾“ x 6 “ |
| 466 | Q)41 HP to 65 HP V.T. Pum Spare Part For Rubber Shit |
| 467 | Q)41 HP to 65 HP V.T. Pum Spare Part For T.T. Plate Bush |
| 468 | Q)41 HP to 65 HP V.T. Pum Spare Part For Neck Ring (Gun Metal) |
| 469 | Q)41 HP to 65 HP V.T. Pum Spare Part For Impelole(Gun Metal) |
| 470 | Q)41 HP to 65 HP V.T. Pum Spare Part For Browl assembly casing |
| 471 | Q)41 HP to 65 HP V.T. Pum Spare Part For6” colume pipe M.s. |
| 472 | Q)41 HP to 65 HP V.T. Pum Spare Part For 8” colume pipe M.s. |
| 473 | Transformer Oil |
| 474 | Q)41 HP to 65 HP V.T. Pum Spare Part For Pump Colet |
| 475 | Shaft Tube Oil 10 no. |
| 476 | Q)41 HP to 65 HP V.T. Pum Spare Part ForImpeller pump shaft |
| 477 | Q)41 HP to 65 HP V.T. Pum Spare Part For Litern Ring |
| 478 | Q)41 HP to 65 HP V.T. Pum Spare Part For Gide spider |
| 479 | Q)41 HP to 65 HP V.T. Pum Spare Part For Colume Pipe coplling |
| 480 | Q)41 HP to 65 HP V.T. Pum Spare Part For Line shaft coplling |
| 481 | Oil tube baring |
| 482 | Q)41 HP to 65 HP V.T. Pum Spare Part For Glad nut |
| 483 | Q)41 HP to 65 HP V.T. Pum Spare Part For Top Oil Tube |
| 484 | Q)41 HP to 65 HP V.T. Pum Spare Part For Spider Baring Bush |
| 485 | Q)41 HP to 65 HP V.T. Pum Spare Part For Guide Spider Rubber Bush with Sirclip |
| 486 | Q)41 HP to 65 HP V.T. Pum Spare Part For Rubber Bush/ Baring |
| 487 | Q)41 HP to 65 HP V.T. Pum Spare Part ForLine Shaft Slive S.S. |
| 488 | Q)41 HP to 65 HP V.T. Pum Spare Part For Water Lubricating Tube |
| 489 | Q)41 HP to 65 HP V.T. Pum Spare Part For Stuffing Box Bush & with gaskit |
| 490 | Q)41 HP to 65 HP V.T. Pum Spare Part For Stuffing Box Baring |
| 491 | Q)41 HP to 65 HP V.T. Pum Spare Part For Latern Ring |
| 492 | Q)41 HP to 65 HP V.T. Pum Spare Part For Sole Plate |
| 493 | Q)41 HP to 65 HP V.T. Pum Spare Part For Base Plate |
| 494 | Q)41 HP to 65 HP V.T. Pum Spare Part For Water Deflector |
| 495 | Q)66 HP to 90 HP V.T. Pum Spare Part ForV.T. Motor baringi) Upper |
| 496 | V.T. Motor baring ii) Lower |
| 497 | Q)66 HP to 90 HP V.T. Pum Spare Part For PDischarge & sectioncase Baring bush gun metal |
| 498 | Q)66 HP to 90 HP V.T. Pum Spare Part For Water seal (Oil water separater) |
| 499 | Q)66 HP to 90 HP V.T. Pum Spare Part For Line Shaft |
| 500 | Q)66 HP to 90 HP V.T. Pum Spare Part ForOil Tube |
| 501 | Q)66 HP to 90 HP V.T. Pum Spare Part For T.T. Plate cast iron |
| 502 | Q)66 HP to 90 HP V.T. Pum Spare Part For Brain rubber bush (spider) |
| 503 | Q)66 HP to 90 HP V.T. Pum Spare Part ForNet (cast iron) |
| 504 | Q)66 HP to 90 HP V.T. Pum Spare Part For Nut bolt ¾“ x 2 “ |
| 505 | Q)66 HP to 90 HP V.T. Pum Spare Part For Nut bolt ¾“ x 6 “ |
| 506 | Q)66 HP to 90 HP V.T. Pum Spare Part For Rubber Shit |
| 507 | Q)66 HP to 90 HP V.T. Pum Spare Part For T.T. Plate Bush |
| 508 | Q)66 HP to 90 HP V.T. Pum Spare Part For Neck Ring (Gun Metal) |
| 509 | Q)66 HP to 90 HP V.T. Pum Spare Part For Impelole(Gun Metal) |
| 510 | Q)66 HP to 90 HP V.T. Pum Spare Part For Browl assembly casing |
| 511 | Q)66 HP to 90 HP V.T. Pum Spare Part For6” colume pipe M.s. |
| 512 | Q)66 HP to 90 HP V.T. Pum Spare Part For 8” colume pipe M.s. |
| 513 | Transformer Oil |
| 514 | Q)66 HP to 90 HP V.T. Pum Spare Part For Pump Colet |
| 515 | Shaft Tube Oil 10 no. |
| 516 | Q)66 HP to 90 HP V.T. Pum Spare Part ForImpeller pump shaft |
| 517 | Q)66 HP to 90 HP V.T. Pum Spare Part For Litern Ring |
| 518 | Q)66 HP to 90 HP V.T. Pum Spare Part For Gide spider |
| 519 | Q)66 HP to 90 HP V.T. Pum Spare Part For Colume Pipe coplling |
| 520 | Q)66 HP to 90 HP V.T. Pum Spare Part For Line shaft coplling |
| 521 | Oil tube baring |
| 522 | Q)66 HP to 90 HP V.T. Pum Spare Part For Glad nut |
| 523 | Q)66 HP to 90 HP V.T. Pum Spare Part For Top Oil Tube |
| 524 | Q)66 HP to 90 HP V.T. Pum Spare Part For Spider Baring Bush |
| 525 | Q)66 HP to 90 HP V.T. Pum Spare Part For Guide Spider Rubber Bush with Sirclip |
| 526 | Q)66 HP to 90 HP V.T. Pum Spare Part For Rubber Bush/ Baring |
| 527 | Q)66 HP to 90 HP V.T. Pum Spare Part ForLine Shaft Slive S.S. |
| 528 | Q)66 HP to 90 HP V.T. Pum Spare Part For Water Lubricating Tube |
| 529 | Q)66 HP to 90 HP V.T. Pum Spare Part For Stuffing Box Bush & with gaskit |
| 530 | Q)66 HP to 90 HP V.T. Pum Spare Part For Stuffing Box Baring |
| 531 | Q)66 HP to 90 HP V.T. Pum Spare Part For Latern Ring |
| 532 | Q)66 HP to 90 HP V.T. Pum Spare Part For Sole Plate |
| 533 | Q)66 HP to 90 HP V.T. Pum Spare Part For Base Plate |
| 534 | Q)66 HP to 90 HP V.T. Pum Spare Part For Water Deflector |
| 535 | S)Monoblock Pump Repairingi) Drive out 1 HP to 3 HP Monoblock Pump |
| 536 | S)Monoblock Pump Repairing ii) Drive out 4 HP to 10 HP Monoblock Pump |
| 537 | S)Monoblock Pump Repairing i) 1 to 1½HP Monoblock Motor Rewinding |
| 538 | S)Monoblock Pump Repairing ii) 2 to 3HP Monoblock Motor Rewinding |
| 539 | S)Monoblock Pump Repairing iii) 4 to 5HP Monoblock Motor Rewinding |
| 540 | S)Monoblock Pump Repairing iv) 6 to 7½HP Monoblock Motor Rewinding |
| 541 | S)Monoblock Pump Repairing v) 8 to 10HP Monoblock Motor Rewinding |
| 542 | S)Monoblock Pump Open Repairing And Fitting i) 1 to 1½HP |
| 543 | S)Monoblock Pump Open Repairing And Fittingii) 2 to 5HP |
| 544 | S)Monoblock Pump Open Repairing And Fitting iii) 6 to 10HP |
| 545 | S) Roter Pump shaft Turning And Polishing i) 1 HP to 5 HP |
| 546 | S) Roter Pump shaft Turning And Polishing ii) 6 HP to 10 HP |
| 547 | S)Monoblock Pump bush and create housing (baring) i) 1 HP to 11/2 HP |
| 548 | S)Monoblock Pump bush and create housing (baring) ii) 2HP to 5 HP |
| 549 | S)Monoblock Pump bush and create housing (baring) iii) 6 HP to 10 HP |
| 550 | S) ToFit New Pump Set i) 1 to 1½HP |
| 551 | S) ToFit New Pump Set ii) 2 to 5HP |
| 552 | S) ToFit New Pump Set iii) 6 to 10HP |
| 553 | T) Monoblock Pump Spare Parts 1 to 1½HP Bearing (Driving side) |
| 554 | T) Monoblock Pump Spare Parts 1 to 1½HP Bearing (Driven side) |
| 555 | T) Monoblock Pump Spare Parts 1 to 1½HP Impeller Key |
| 556 | T) Monoblock Pump Spare Parts 1 to 1½HPPump Bush |
| 557 | T) Monoblock Pump Spare Parts 1 to 1½HP Air Fan |
| 558 | T) Monoblock Pump Spare Parts 1 to 1½HP Sturnut Key |
| 559 | T) Monoblock Pump Spare Parts 1 to 1½HP Bearing Plate both side1 item |
| 560 | T) Monoblock Pump Spare Parts 1 to 1½HP Water seal |
| 561 | T) Monoblock Pump Spare Parts 1 to 1½HP Gland Rope |
| 562 | T) Monoblock Pump Spare Parts 1 to 1½HP Gland Bush |
| 563 | T) Monoblock Pump Spare Parts 1 to 1½HP Gland Plate |
| 564 | T) Monoblock Pump Spare Parts 1 to 1½HP Roter fitted shaft |
| 565 | T) Monoblock Pump Spare Parts 1 to 1½HP Latern Ring |
| 566 | T) Monoblock Pump Spare Parts 1 to 1½HP Impelor brass |
| 567 | T) Monoblock Pump Spare Parts 1 to 1½HP Impelor C.I. |
| 568 | T) Monoblock Pump Spare Parts 1 to 1½HP Defuser |
| 569 | T) Monoblock Pump Spare Parts 1 to 1½HPBearing housing |
| 570 | T) Monoblock Pump Spare Parts 1 to 1½HP Neck Ring |
| 571 | T) Monoblock Pump Spare Parts 1 to 1½HP Foot volve |
| 572 | T) Monoblock Pump Spare Parts 1 to 1½HP Fluge (Dilevery/ suction) |
| 573 | T) Monoblock Pump Spare Parts 1 to 1½HP Shaft sleeve |
| 574 | T) Monoblock Pump Spare Parts 1 to 1½HP Delivery casing |
| 575 | T) Monoblock Pump Spare Parts 1 to 1½HP Stater Fitted motorbody |
| 576 | T) Monoblock Pump Spare Parts 1 to 1½HP Spacer |
| 577 | T) Monoblock Pump Spare Parts 1 to 1½HP Fan cover |
| 578 | T) Monoblock Pump Spare Parts 1 to 1½HP Water Deflector |
| 579 | T) Monoblock Pump Spare Parts2 to 3 HPBearing (Driving side) |
| 580 | T) Monoblock Pump Spare Parts2 to 3 HP Bearing (Driven side) |
| 581 | T) Monoblock Pump Spare Parts2 to 3 HP Impeller Key |
| 582 | T) Monoblock Pump Spare Parts2 to 3 HP Pump Bush |
| 583 | T) Monoblock Pump Spare Parts2 to 3 HP Air Fan |
| 584 | T) Monoblock Pump Spare Parts2 to 3 HP Sturnut Key |
| 585 | T) Monoblock Pump Spare Parts2 to 3 HP Bearing Plate both side1 item |
| 586 | T) Monoblock Pump Spare Parts2 to 3 HP Water seal |
| 587 | T) Monoblock Pump Spare Parts2 to 3 HP Gland Rope |
| 588 | T) Monoblock Pump Spare Parts2 to 3 HP Gland Bush |
| 589 | T) Monoblock Pump Spare Parts2 to 3 HP Gland Plate |
| 590 | T) Monoblock Pump Spare Parts2 to 3 HP Roter fitted shaft |
| 591 | T) Monoblock Pump Spare Parts2 to 3 HP Latern Ring |
| 592 | T) Monoblock Pump Spare Parts2 to 3 HP Impellor brass |
| 593 | T) Monoblock Pump Spare Parts2 to 3 HPImpelor C.I. |
| 594 | T) Monoblock Pump Spare Parts2 to 3 HP Defuser |
| 595 | T) Monoblock Pump Spare Parts2 to 3 HP Baring housing |
| 596 | T) Monoblock Pump Spare Parts2 to 3 HP Neck Ring |
| 597 | T) Monoblock Pump Spare Parts2 to 3 HP Foot volve |
| 598 | T) Monoblock Pump Spare Parts2 to 3 HP Fluge (Dilevery/ suction) |
| 599 | T) Monoblock Pump Spare Parts2 to 3 HP Shaft sleve |
| 600 | T) Monoblock Pump Spare Parts2 to 3 HP Delivery casing |
| 601 | T) Monoblock Pump Spare Parts2 to 3 HP Stater Fitted motorbody |
| 602 | T) Monoblock Pump Spare Parts2 to 3 HP Spacer |
| 603 | T) Monoblock Pump Spare Parts2 to 3 HP Fan cover |
| 604 | T) Monoblock Pump Spare Parts2 to 3 HP Water Deflector |
| 605 | T) Monoblock Pump Spare Parts4 to 5 HP Bearing (Driving side) |
| 606 | T) Monoblock Pump Spare Parts4 to 5 HPBearing (Driven side) |
| 607 | T) Monoblock Pump Spare Parts4 to 5 HP Impelor Key |
| 608 | T) Monoblock Pump Spare Parts4 to 5 HP Pump Bush |
| 609 | T) Monoblock Pump Spare Parts4 to 5 HP Air Fan |
| 610 | T) Monoblock Pump Spare Parts4 to 5 HP Sturnut Key |
| 611 | T) Monoblock Pump Spare Parts4 to 5 HP Bearing Plate both side1 item |
| 612 | T) Monoblock Pump Spare Parts4 to 5 HP Water seal |
| 613 | T) Monoblock Pump Spare Parts4 to 5 HP Gland Rope |
| 614 | T) Monoblock Pump Spare Parts4 to 5 HP Gland Bush |
| 615 | T) Monoblock Pump Spare Parts4 to 5 HP Gland Plate |
| 616 | T) Monoblock Pump Spare Parts4 to 5 HP Roter fitted shaft |
| 617 | T) Monoblock Pump Spare Parts4 to 5 HP Latern Ring |
| 618 | T) Monoblock Pump Spare Parts4 to 5 HPImpeller brass |
| 619 | T) Monoblock Pump Spare Parts4 to 5 HP Impelor C.I. |
| 620 | T) Monoblock Pump Spare Parts4 to 5 HP Defuser |
| 621 | T) Monoblock Pump Spare Parts4 to 5 HP Baring housing |
| 622 | T) Monoblock Pump Spare Parts4 to 5 HP Neck Ring |
| 623 | T) Monoblock Pump Spare Parts4 to 5 HP Foot volve |
| 624 | T) Monoblock Pump Spare Parts4 to 5 HP Fluge (Dilevery/ suction) |
| 625 | T) Monoblock Pump Spare Parts4 to 5 HP Shaft sleve |
| 626 | T) Monoblock Pump Spare Parts4 to 5 HP Delivery casing |
| 627 | T) Monoblock Pump Spare Parts4 to 5 HP Stater Fitted motorbody |
| 628 | T) Monoblock Pump Spare Parts4 to 5 HP Spacer |
| 629 | T) Monoblock Pump Spare Parts4 to 5 HP Fan cover |
| 630 | T) Monoblock Pump Spare Parts4 to 5 HP Water Deflector |
| 631 | T) Monoblock Pump Spare Parts6 to 7½HPBaring (Driving side) |
| 632 | T) Monoblock Pump Spare Parts6 to 7½HP Bearing (Driven side) |
| 633 | T) Monoblock Pump Spare Parts6 to 7½HP Impeller Key |
| 634 | T) Monoblock Pump Spare Parts6 to 7½HPPump Bush |
| 635 | T) Monoblock Pump Spare Parts6 to 7½HP Air Fan |
| 636 | T) Monoblock Pump Spare Parts6 to 7½HP Sturnut Key |
| 637 | T) Monoblock Pump Spare Parts6 to 7½HP Bearing Plate both side1 item |
| 638 | T) Monoblock Pump Spare Parts6 to 7½HP Water seal |
| 639 | T) Monoblock Pump Spare Parts6 to 7½HP Gland Rope |
| 640 | T) Monoblock Pump Spare Parts6 to 7½HP Gland Bush |
| 641 | T) Monoblock Pump Spare Parts6 to 7½HP Gland Plate |
| 642 | T) Monoblock Pump Spare Parts6 to 7½HP Roter fitted shaft |
| 643 | T) Monoblock Pump Spare Parts6 to 7½HP Latern Ring |
| 644 | T) Monoblock Pump Spare Parts6 to 7½HP Impelor brass |
| 645 | T) Monoblock Pump Spare Parts6 to 7½HP Impeller C.I. |
| 646 | T) Monoblock Pump Spare Parts6 to 7½HP Defuser |
| 647 | T) Monoblock Pump Spare Parts6 to 7½HP Bearing housing |
| 648 | T) Monoblock Pump Spare Parts6 to 7½HP Neck Ring |
| 649 | T) Monoblock Pump Spare Parts6 to 7½HPFoot volve |
| 650 | T) Monoblock Pump Spare Parts6 to 7½HP Fluge (Dilevery/ suction) |
| 651 | T) Monoblock Pump Spare Parts6 to 7½HP Shaft sleve |
| 652 | T) Monoblock Pump Spare Parts6 to 7½HP Delivery casing |
| 653 | T) Monoblock Pump Spare Parts6 to 7½HP Stater Fitted motorbody |
| 654 | T) Monoblock Pump Spare Parts6 to 7½HP Spacer |
| 655 | T) Monoblock Pump Spare Parts6 to 7½HP Fan cover |
| 656 | T) Monoblock Pump Spare Parts6 to 7½HP Water Deflector |
| 657 | T) Monoblock Pump Spare Parts 8 to10HP Bearing (Driving side) |
| 658 | T) Monoblock Pump Spare Parts 8 to10HP Bearing (Driven side) |
| 659 | T) Monoblock Pump Spare Parts 8 to10HP Impeller Key |
| 660 | T) Monoblock Pump Spare Parts 8 to10HP Pump Bush |
| 661 | T) Monoblock Pump Spare Parts 8 to10HP Air Fan |
| 662 | T) Monoblock Pump Spare Parts 8 to10HP Sturnut Key |
| 663 | T) Monoblock Pump Spare Parts 8 to10HP Bearing Plate both side1 item |
| 664 | T) Monoblock Pump Spare Parts 8 to10HP Water seal |
| 665 | T) Monoblock Pump Spare Parts 8 to10HP Gland Rope |
| 666 | T) Monoblock Pump Spare Parts 8 to10HP Gland Bush |
| 667 | T) Monoblock Pump Spare Parts 8 to10HP Gland Plate |
| 668 | T) Monoblock Pump Spare Parts 8 to10HP Roter fitted shaft |
| 669 | T) Monoblock Pump Spare Parts 8 to10HP Latern Ring |
| 670 | T) Monoblock Pump Spare Parts 8 to10HP Impelor brass |
| 671 | T) Monoblock Pump Spare Parts 8 to10HP Impelor C.I. |
| 672 | T) Monoblock Pump Spare Parts 8 to10HP Defuser |
| 673 | T) Monoblock Pump Spare Parts 8 to10HP Baring housing |
| 674 | T) Monoblock Pump Spare Parts 8 to10HP Neck Ring |
| 675 | T) Monoblock Pump Spare Parts 8 to10HPFoot volve |
| 676 | T) Monoblock Pump Spare Parts 8 to10HP Fluge (Dilevery/ suction) |
| 677 | T) Monoblock Pump Spare Parts 8 to10HP Shaft sleve |
| 678 | T) Monoblock Pump Spare Parts 8 to10HP Delivery casing |
| 679 | T) Monoblock Pump Spare Parts 8 to10HP Stater Fitted motorbody |
| 680 | T) Monoblock Pump Spare Parts 8 to10HP Spacer |
| 681 | T) Monoblock Pump Spare Parts 8 to10HP Fan cover |
| 682 | T) Monoblock Pump Spare Parts 8 to10HP Water Deflector |
| 683 | U) Bare Pump RepairingTo drive out bare pump i) 1 to 5 HP |
| 684 | U) Bare Pump RepairingTo drive out bare pump ii) 6 to 9 HP |
| 685 | U) Bare Pump RepairingTo drive out bare pump iii) 10 to 20 HP |
| 686 | U) Bare Pump RepairingTo drive out bare pump iv) 21 to 50 HP |
| 687 | U) Bare Pump to open, repairing, fitting & Testing i) 1 to 5 HP |
| 688 | U) Bare Pump to open, repairing, fitting & Testing ii) 6 to 9 HP |
| 689 | U) Bare Pump to open, repairing, fitting & Testing iii) 10 to 20 HP |
| 690 | U) Bare Pump to open, repairing, fitting & Testing iv) 21 to 50 HP |
| 691 | U) Bare Pump to open, repairing, fitting & Testing v) 51 to 80 HP |
| 692 | U) Pump shaft turning & polishing i) 1 to 5 HP |
| 693 | U) Pump shaft turning & polishing ii) 6 to 9 HP |
| 694 | U) Pump shaft turning & polishing iii) 10 to 20 HP |
| 695 | U) Pump shaft turning & polishing iv) 21 to 50 HP |
| 696 | U) Pump shaft turning & polishing v) 51 to 80 HP |
| 697 | U) To make pump bush & housing (baring) i) 1 to 5 HP |
| 698 | U) To make pump bush & housing (baring) ii) 6 to 9 HP |
| 699 | U) To make pump bush & housing (baring) iii) 10 to 20 HP |
| 700 | U) To make pump bush & housing (baring) iv) 21 to 50 HP |
| 701 | U) To make pump bush & housing (baring) v) 51 to 80 HP |
| 702 | U) To fit new bare pump i) 1 to 5 HP |
| 703 | U) To fit new bare pump ii) 6 to 9 HP |
| 704 | U) To fit new bare pump iii) 10 to 20 HP |
| 705 | U) To fit new bare pump iv) 21 to 50 HP |
| 706 | U) To fit new bare pump v) 51 to 80 HP |
| 707 | U) Pump repairing & fitting i) 1 to 5 HP |
| 708 | U) Pump repairing & fitting ii) 6 to 9 HP |
| 709 | U) Pump repairing & fitting iii) 10 to 20 HP |
| 710 | U) Pump repairing & fitting iv) 21 to 50 HP |
| 711 | U) Pump repairing & fitting v) 51 to 80 HP |
| 712 | U) To make gland bush housing i) 1 to 5 HP |
| 713 | U) To make gland bush housing ii) 6 to 9 HP |
| 714 | U) To make gland bush housing iii) 10 to 20 HP |
| 715 | U) To make gland bush housing iv) 21 to 50 HP |
| 716 | U) To make gland bush housing v) 51 to 80 HP |
| 717 | U) Drive out bare pump pipe line with foot volve i) 1 to 5 HP |
| 718 | U) Drive out bare pump pipe line with foot volve ii) 6 to 9 HP |
| 719 | U) Drive out bare pump pipe line with foot volve iii) 10 to 20 HP |
| 720 | U) Drive out bare pump pipe line with foot volve iv) 21 to 50 HP |
| 721 | U) Drive out bare pump pipe line with foot volve v) 51 to 80 HP |
| 722 | U) To fit bare pump pipeline with foot volve i) 1 to 5 HP |
| 723 | U) To fit bare pump pipeline with foot volve ii) 6 to 9 HP |
| 724 | U) To fit bare pump pipeline with foot volve iii) 10 to 20 HP |
| 725 | U) To fit bare pump pipeline with foot volve iv) 21 to 50 HP |
| 726 | U) To fit bare pump pipeline with foot volve v) 51 to 80 HP |
| 727 | V) Bare Pump spare parts1 to 5HPBaring (Ball baring) |
| 728 | V) Bare Pump spare parts1 to 5HP Rolar baring |
| 729 | V) Bare Pump spare parts1 to 5HP Impelor key |
| 730 | V) Bare Pump spare parts1 to 5HP Pump bush |
| 731 | V) Bare Pump spare parts1 to 5HP Stud nut |
| 732 | V) Bare Pump spare parts1 to 5HP bNut bolt kit |
| 733 | V) Bare Pump spare parts1 to 5HP Air cock |
| 734 | V) Bare Pump spare parts1 to 5HP Base plate |
| 735 | V) Bare Pump spare parts1 to 5HP Water seal |
| 736 | V) Bare Pump spare parts1 to 5HP Gland bush |
| 737 | V) Bare Pump spare parts1 to 5HP Gland plate |
| 738 | V) Bare Pump spare parts1 to 5HP Pump shaft |
| 739 | V) Bare Pump spare parts1 to 5HP Latern Ring |
| 740 | V) Bare Pump spare parts1 to 5HP Impeller brass |
| 741 | V) Bare Pump spare parts1 to 5HP Impeller (C.I) |
| 742 | V) Bare Pump spare parts1 to 5HP Difuser |
| 743 | V) Bare Pump spare parts1 to 5HP Bearing housing |
| 744 | V) Bare Pump spare parts1 to 5HP Neck ring (small) |
| 745 | V) Bare Pump spare parts1 to 5HP Neck ring (big) |
| 746 | V) Bare Pump spare parts1 to 5HPFlasher |
| 747 | V) Bare Pump spare parts1 to 5HP Foot volve |
| 748 | Check nut 1 to 5HP |
| 749 | V) Bare Pump spare parts1 to 5HP Impelor housing |
| 750 | V) Bare Pump spare parts1 to 5HP Rotor casing |
| 751 | V) Bare Pump spare parts1 to 5HP Rotor |
| 752 | V) Bare Pump spare parts1 to 5HP Delevery casing |
| 753 | V) Bare Pump spare parts1 to 5HP Stuffing box bush |
| 754 | V) Bare Pump spare parts1 to 5HP Shaft sleve |
| 755 | V) Bare Pump spare parts1 to 5HP Water deflector |
| 756 | V) Bare Pump spare parts1 to 5HP Couplling half flexible |
| 757 | V) Bare Pump spare parts1 to 5HP Bearing cover |
| 758 | V) Bare Pump spare parts1 to 5HP Grees cup |
| 759 | V) Bare Pump spare parts1 to 5HP Flage section/ delivery |
| 760 | V) Bare Pump spare parts6 to 9HPBaring (Ball baring) |
| 761 | V) Bare Pump spare parts6 to 9HP Rolar baring |
| 762 | V) Bare Pump spare parts6 to 9HP Impelor key |
| 763 | V) Bare Pump spare parts6 to 9HP Pump bush |
| 764 | V) Bare Pump spare parts6 to 9HP Stud nut |
| 765 | V) Bare Pump spare parts6 to 9HP bNut bolt kit |
| 766 | V) Bare Pump spare parts6 to 9HP Air cock |
| 767 | V) Bare Pump spare parts6 to 9HP Base plate |
| 768 | V) Bare Pump spare parts6 to 9HP Water seal |
| 769 | V) Bare Pump spare parts6 to 9HP Gland bush |
| 770 | V) Bare Pump spare parts6 to 9HP Gland plate |
| 771 | V) Bare Pump spare parts6 to 9HP Pump shaft |
| 772 | V) Bare Pump spare parts6 to 9HP Latern Ring |
| 773 | V) Bare Pump spare parts6 to 9HP Impeller brass |
| 774 | V) Bare Pump spare parts6 to 9HP Impeller (C.I) |
| 775 | V) Bare Pump spare parts6 to 9HP Difuser |
| 776 | V) Bare Pump spare parts6 to 9HP Bearing housing |
| 777 | V) Bare Pump spare parts6 to 9HP Neck ring (small) |
| 778 | V) Bare Pump spare parts6 to 9HP Neck ring (big) |
| 779 | V) Bare Pump spare parts6 to 9HPFlasher |
| 780 | V) Bare Pump spare parts6 to 9HP Foot volve |
| 781 | Check nut 6 to 9HP |
| 782 | V) Bare Pump spare parts6 to 9HP Impelor housing |
| 783 | V) Bare Pump spare parts6 to 9HP Rotor casing |
| 784 | V) Bare Pump spare parts6 to 9HP Rotor |
| 785 | V) Bare Pump spare parts6 to 9HP Delevery casing |
| 786 | V) Bare Pump spare parts6 to 9HP Stuffing box bush |
| 787 | V) Bare Pump spare parts6 to 9HP Shaft sleve |
| 788 | V) Bare Pump spare parts6 to 9HP Water deflector |
| 789 | V) Bare Pump spare parts6 to 9HP Couplling half flexible |
| 790 | V) Bare Pump spare parts6 to 9HP Bearing cover |
| 791 | V) Bare Pump spare parts6 to 9HP Grees cup |
| 792 | V) Bare Pump spare parts6 to 9HP Flage section/ delivery |
| 793 | V) Bare Pump spare parts10 to 20HPBaring (Ball baring) |
| 794 | V) Bare Pump spare parts10 to 20HP Rolar baring |
| 795 | V) Bare Pump spare parts10 to 20HP Impelor key |
| 796 | V) Bare Pump spare parts10 to 20HP Pump bush |
| 797 | V) Bare Pump spare parts10 to 20HP Stud nut |
| 798 | V) Bare Pump spare parts10 to 20HP bNut bolt kit |
| 799 | V) Bare Pump spare parts10 to 20HP Air cock |
| 800 | V) Bare Pump spare parts10 to 20HP Base plate |
| 801 | V) Bare Pump spare parts10 to 20HP Water seal |
| 802 | V) Bare Pump spare parts10 to 20HP Gland bush |
| 803 | V) Bare Pump spare parts10 to 20HP Gland plate |
| 804 | V) Bare Pump spare parts10 to 20HP Pump shaft |
| 805 | V) Bare Pump spare parts10 to 20HP Latern Ring |
| 806 | V) Bare Pump spare parts10 to 20HP Impeller brass |
| 807 | V) Bare Pump spare parts10 to 20HP Impeller (C.I) |
| 808 | V) Bare Pump spare parts10 to 20HP Difuser |
| 809 | V) Bare Pump spare parts10 to 20HP Bearing housing |
| 810 | V) Bare Pump spare parts10 to 20HP Neck ring (small) |
| 811 | V) Bare Pump spare parts10 to 20HP Neck ring (big) |
| 812 | V) Bare Pump spare parts10 to 20HPFlasher |
| 813 | V) Bare Pump spare parts10 to 20HP Foot volve |
| 814 | Check nut 10 to 20HP |
| 815 | V) Bare Pump spare parts10 to 20HP Impelor housing |
| 816 | V) Bare Pump spare parts10 to 20HP Rotor casing |
| 817 | V) Bare Pump spare parts10 to 20HP Rotor |
| 818 | V) Bare Pump spare parts10 to 20HP Delevery casing |
| 819 | V) Bare Pump spare parts10 to 20HP Stuffing box bush |
| 820 | V) Bare Pump spare parts10 to 20HP Shaft sleve |
| 821 | V) Bare Pump spare parts10 to 20HP Water deflector |
| 822 | V) Bare Pump spare parts10 to 20HP Couplling half flexible |
| 823 | V) Bare Pump spare parts10 to 20HP Bearing cover |
| 824 | V) Bare Pump spare parts10 to 20HP Grees cup |
| 825 | V) Bare Pump spare parts10 to 20HP Flage section/ delivery |
| 826 | V) Bare Pump spare parts21 to 50HPBaring (Ball baring) |
| 827 | V) Bare Pump spare parts21 to 50HP Rolar baring |
| 828 | V) Bare Pump spare parts21 to 50HP Impelor key |
| 829 | V) Bare Pump spare parts21 to 50HP Pump bush |
| 830 | V) Bare Pump spare parts21 to 50HP Stud nut |
| 831 | V) Bare Pump spare parts21 to 50HP bNut bolt kit |
| 832 | V) Bare Pump spare parts21 to 50HP Air cock |
| 833 | V) Bare Pump spare parts21 to 50HP Base plate |
| 834 | V) Bare Pump spare parts21 to 50HP Water seal |
| 835 | V) Bare Pump spare parts21 to 50HP Gland bush |
| 836 | V) Bare Pump spare parts21 to 50HP Gland plate |
| 837 | V) Bare Pump spare parts21 to 50HP Pump shaft |
| 838 | V) Bare Pump spare parts21 to 50HP Latern Ring |
| 839 | V) Bare Pump spare parts21 to 50HP Impeller brass |
| 840 | V) Bare Pump spare parts21 to 50HP Impeller (C.I) |
| 841 | V) Bare Pump spare parts21 to 50HP Difuser |
| 842 | V) Bare Pump spare parts21 to 50HP Bearing housing |
| 843 | V) Bare Pump spare parts21 to 50HP Neck ring (small) |
| 844 | V) Bare Pump spare parts21 to 50HP Neck ring (big) |
| 845 | V) Bare Pump spare parts21 to 50HPFlasher |
| 846 | V) Bare Pump spare parts21 to 50HP Foot volve |
| 847 | Check nut 21 to 50HP |
| 848 | V) Bare Pump spare parts21 to 50HP Impelor housing |
| 849 | V) Bare Pump spare parts21 to 50HP Rotor casing |
| 850 | V) Bare Pump spare parts21 to 50HP Rotor |
| 851 | V) Bare Pump spare parts21 to 50HP Delevery casing |
| 852 | V) Bare Pump spare parts21 to 50HP Stuffing box bush |
| 853 | V) Bare Pump spare parts21 to 50HP Shaft sleve |
| 854 | V) Bare Pump spare parts21 to 50HP Water deflector |
| 855 | V) Bare Pump spare parts21 to 50HP Couplling half flexible |
| 856 | V) Bare Pump spare parts21 to 50HP Bearing cover |
| 857 | V) Bare Pump spare parts21 to 50HP Grees cup |
| 858 | V) Bare Pump spare parts21 to 50HP Flage section/ delivery |
| 859 | V) Bare Pump spare parts 51 to 90 HPBaring (Ball baring) |
| 860 | V) Bare Pump spare parts 51 to 90 HP Rolar baring |
| 861 | V) Bare Pump spare parts 51 to 90 HP Impelor key |
| 862 | V) Bare Pump spare parts 51 to 90 HP Pump bush |
| 863 | V) Bare Pump spare parts 51 to 90 HP Stud nut |
| 864 | V) Bare Pump spare parts 51 to 90 HP bNut bolt kit |
| 865 | V) Bare Pump spare parts 51 to 90 HP Air cock |
| 866 | V) Bare Pump spare parts 51 to 90 HP Base plate |
| 867 | V) Bare Pump spare parts 51 to 90 HP Water seal |
| 868 | V) Bare Pump spare parts 51 to 90 HP Gland bush |
| 869 | V) Bare Pump spare parts 51 to 90 HP Gland plate |
| 870 | V) Bare Pump spare parts 51 to 90 HP Pump shaft |
| 871 | V) Bare Pump spare parts 51 to 90 HP Latern Ring |
| 872 | V) Bare Pump spare parts 51 to 90 HP Impeller brass |
| 873 | V) Bare Pump spare parts 51 to 90 HP Impeller (C.I) |
| 874 | V) Bare Pump spare parts 51 to 90 HP Difuser |
| 875 | V) Bare Pump spare parts 51 to 90 HP Bearing housing |
| 876 | V) Bare Pump spare parts 51 to 90 HP Neck ring (small) |
| 877 | V) Bare Pump spare parts 51 to 90 HP Neck ring (big) |
| 878 | V) Bare Pump spare parts 51 to 90 HPFlasher |
| 879 | V) Bare Pump spare parts 51 to 90 HP Foot volve |
| 880 | Check nut51 to 90 HP |
| 881 | V) Bare Pump spare parts 51 to 90 HP Impelor housing |
| 882 | V) Bare Pump spare parts 51 to 90 HP Rotor casing |
| 883 | V) Bare Pump spare parts 51 to 90 HP Rotor |
| 884 | V) Bare Pump spare parts 51 to 90 HP Delevery casing |
| 885 | V) Bare Pump spare parts 51 to 90 HP Stuffing box bush |
| 886 | V) Bare Pump spare parts 51 to 90 HP Shaft sleve |
| 887 | V) Bare Pump spare parts 51 to 90 HP Water deflector |
| 888 | V) Bare Pump spare parts 51 to 90 HP Couplling half flexible |
| 889 | V) Bare Pump spare parts 51 to 90 HP Bearing cover |
| 890 | V) Bare Pump spare parts 51 to 90 HP Grees cup |
| 891 | V) Bare Pump spare parts 51 to 90 HP Flage section/ delivery |
| 892 | W) Bare Motor repairing Drive out bare motor i) 1 HP to 5 HP |
| 893 | W) Bare Motor repairing Drive out bare motor ii) 6 HP to 6 HP |
| 894 | W) Bare Motor repairing Drive out bare motor iii) 10 HP to 20 HP |
| 895 | W) Bare Motor repairing Drive out bare motor iv) 21 HP to 50 HP |
| 896 | W) Bare Motor repairing Drive out bare motor v) 51 HP to 90 HP |
| 897 | W) Bare motor rewindingi) 1 HP to 5 HP |
| 898 | W) Bare motor rewindingii) 6 HP to 6 HP |
| 899 | W) Bare motor rewindingiii) 10 HP to 20 HP |
| 900 | W) Bare motor rewindingiv) 21 HP to 50 HP |
| 901 | W) Bare motor rewindingv) 51 HP to 90 HP |
| 902 | W) Motor opening, over oiling, fitting & testing i) 1 HP to 5 HP |
| 903 | W) Motor opening, over oiling, fitting & testing ii) 6 HP to 6 HP |
| 904 | W) Motor opening, over oiling, fitting & testing iii) 10 HP to 20 HP |
| 905 | W) Motor opening, over oiling, fitting & testing iv) 21 HP to 50 HP |
| 906 | W) Motor opening, over oiling, fitting & testing v) 51 HP to 90 HP |
| 907 | W) Rotor shaft turning & polishing i) 1 HP to 5 HP |
| 908 | W) Rotor shaft turning & polishing ii) 6 HP to 6 HP |
| 909 | W) Rotor shaft turning & polishing iii) 10 HP to 20 HP |
| 910 | W) Rotor shaft turning & polishing iv) 21 HP to 50 HP |
| 911 | W) Rotor shaft turning & polishing v) 51 HP to 90 HP |
| 912 | W) To make motor bush & housing (Baring sheet) i) 1 HP to 5 HP |
| 913 | W) To make motor bush & housing (Baring sheet) ii) 6 HP to 6 HP |
| 914 | W) To make motor bush & housing (Baring sheet) iii) 10 HP to 20 HP |
| 915 | W) To make motor bush & housing (Baring sheet) iv) 21 HP to 50 HP |
| 916 | W) To make motor bush & housing (Baring sheet) v) 51 HP to 90 HP |
| 917 | W) To fit new motor i) 1 HP to 5 HP |
| 918 | W) To fit new motor ii) 6 HP to 6 HP |
| 919 | W) To fit new motor iii) 10 HP to 20 HP |
| 920 | W) To fit new motor iv) 21 HP to 50 HP |
| 921 | W) To fit new motor v) 51 HP to 90 HP |
| 922 | W) Panel board & Starter repairing i) 1 HP to 5 HP |
| 923 | W) Panel board & Starter repairing ii) 6 HP to 6 HP |
| 924 | W) Panel board & Starter repairing iii) 10 HP to 20 HP |
| 925 | W) Panel board & Starter repairing iv) 21 HP to 50 HP |
| 926 | W) Panel board & Starter repairing v) 51 HP to 70 HP |
| 927 | W) Panel board & Starter repairing vi) 71 HP to 90 HP |
| 928 | W) To fit motor as it is i) 1 HP to 5 HP |
| 929 | W) To fit motor as it is ii) 6 HP to 6 HP |
| 930 | W) To fit motor as it is iii) 10 HP to 20 HP |
| 931 | W) To fit motor as it is iv) 21 HP to 50 HP |
| 932 | W) To fit motor as it is v) 51 HP to 90 HP |
| 933 | X)Bare Motor spare parts1 to 5HP Bearing |
| 934 | X)Bare Motor spare parts1 to 5HP Air fan |
| 935 | X)Bare Motor spare parts1 to 5HP Shaft |
| 936 | X)Bare Motor spare parts1 to 5HP Bearing plate |
| 937 | X)Bare Motor spare parts1 to 5HP Motor bush |
| 938 | X)Bare Motor spare parts1 to 5HP Rotor assembly |
| 939 | X)Bare Motor spare parts1 to 5HP Stud nut kit |
| 940 | X)Bare Motor spare parts1 to 5HP Nut bolt kit |
| 941 | X)Bare Motor spare parts6 to 9HP Bearing |
| 942 | X)Bare Motor spare parts6 to 9HP Air fan |
| 943 | X)Bare Motor spare parts6 to 9HP Shaft |
| 944 | X)Bare Motor spare parts6 to 9HP Bearing plate |
| 945 | X)Bare Motor spare parts6 to 9HP Motor bush |
| 946 | X)Bare Motor spare parts6 to 9HP Rotor assembly |
| 947 | X)Bare Motor spare parts6 to 9HP Stud nut kit |
| 948 | X)Bare Motor spare parts6 to 9HP Nut bolt kit |
| 949 | X)Bare Motor spare parts10 to 20HP Bearing |
| 950 | X)Bare Motor spare parts10 to 20HP Air fan |
| 951 | X)Bare Motor spare parts10 to 20HP Shaft |
| 952 | X)Bare Motor spare parts10 to 20HP Bearing plate |
| 953 | X)Bare Motor spare parts10 to 20HP Motor bush |
| 954 | X)Bare Motor spare parts10 to 20HP Rotor assembly |
| 955 | X)Bare Motor spare parts10 to 20HP Stud nut kit |
| 956 | X)Bare Motor spare parts10 to 20HP Nut bolt kit |
| 957 | X)Bare Motor spare parts21 to 50HP Bearing |
| 958 | X)Bare Motor spare parts21 to 50HP Air fan |
| 959 | X)Bare Motor spare parts21 to 50HP Shaft |
| 960 | X)Bare Motor spare parts21 to 50HP Bearing plate |
| 961 | X)Bare Motor spare parts21 to 50HP Motor bush |
| 962 | X)Bare Motor spare parts21 to 50HP Rotor assembly |
| 963 | X)Bare Motor spare parts21 to 50HP Stud nut kit |
| 964 | X)Bare Motor spare parts21 to 50HP Nut bolt kit |
| 965 | X)Bare Motor spare parts51 to 90HP Bearing |
| 966 | X)Bare Motor spare parts51 to 90HP Air fan |
| 967 | X)Bare Motor spare parts51 to 90HP Shaft |
| 968 | X)Bare Motor spare parts51 to 90HP Bearing plate |
| 969 | X)Bare Motor spare parts51 to 90HP Motor bush |
| 970 | X)Bare Motor spare parts51 to 90HP Rotor assembly |
| 971 | X)Bare Motor spare parts51 to 90HP Stud nut kit |
| 972 | X)Bare Motor spare parts51 to 90HP Nut bolt kit |
| 973 | Y)Vaccume Pump Repairing Drive out pump i) 1 to 3 HP |
| 974 | Y)Vaccume Pump Repairing Drive out pump ii) 4 to 5 HP |
| 975 | Y)Vaccume Pump Repairing Motor Rewinding (Vaccum Pump) i) 1 to 3 HP |
| 976 | Y)Vaccume Pump Repairing Motor Rewinding (Vaccum Pump) ii) 4 to 5 HP |
| 977 | Y)Vaccume Pump Repairing Drive out pump Pump opening, repairing, over oiling, fitting & testing i) 1 to 3 HP |
| 978 | Y)Vaccume Pump Repairing Drive out pump Pump opening, repairing, over oiling, fitting & testing ii) 4 to 5 HP |
| 979 | Y)Rotor shaft turning & polishing i) 1 to 3 HP |
| 980 | Y)Rotor shaft turning & polishing ii) 4 to 5 HP |
| 981 | Y)To make vaccume pump bush & baring housing i) 1 to 3 HP |
| 982 | Y)To make vaccume pump bush & baring housing ii) 4 to 5 HP |
| 983 | Y)To fit new pump set i) 1 to 3 HP |
| 984 | Y)To fit new pump set ii) 4 to 5 HP |
| 985 | Y)Panel board & starter repairing i) 1 to 3 HP |
| 986 | Y)Panel board & starter repairing ii) 4 to 5 HP |
| 987 | Z) Vaccume Pump Spare Parts 1 to 3 HP Bearing |
| 988 | Z) Vaccume Pump Spare Parts 1 to 3 HP Impeller Key |
| 989 | Z) Vaccume Pump Spare Parts 1 to 3 HP Pump bush |
| 990 | Z) Vaccume Pump Spare Parts 1 to 3 HP Air fan |
| 991 | Z) Vaccume Pump Spare Parts 1 to 3 HP Sturnut key |
| 992 | Z) Vaccume Pump Spare Parts 1 to 3 HP Bearing plate both side |
| 993 | Z) Vaccume Pump Spare Parts 1 to 3 HP Mechanical seal |
| 994 | Z) Vaccume Pump Spare Parts 1 to 3 HP Gland rope |
| 995 | Z) Vaccume Pump Spare Parts 1 to 3 HP Gland bush |
| 996 | Z) Vaccume Pump Spare Parts 1 to 3 HP Gland plate |
| 997 | Z) Vaccume Pump Spare Parts 1 to 3 HP Rotor fitted shaft |
| 998 | Z) Vaccume Pump Spare Parts 1 to 3 HP Latern Ring |
| 999 | Z) Vaccume Pump Spare Parts 1 to 3 HP Rotor G.M. |
| 1000 | Z) Vaccume Pump Spare Parts 1 to 3 HP Fan cover |
| 1001 | Z) Vaccume Pump Spare Parts 1 to 3 HP Spacer |
| 1002 | Z) Vaccume Pump Spare Parts 1 to 3 HP Bearing housing |
| 1003 | Z) Vaccume Pump Spare Parts 1 to 3 HP Neck Ring |
| 1004 | Z) Vaccume Pump Spare Parts 1 to 3 HP Port plate |
| 1005 | Z) Vaccume Pump Spare Parts 1 to 3 HP Flage (delevery/ section) |
| 1006 | Z) Vaccume Pump Spare Parts 1 to 3 HP Shaft sleve |
| 1007 | Z) Vaccume Pump Spare Parts 1 to 3 HP Suction & delivery chember |
| 1008 | Z) Vaccume Pump Spare Parts 1 to 3 HP Steter fitted motorbody |
| 1009 | Z) Vaccume Pump Spare Parts 1 to 3 HP Tie rod |
| 1010 | Z) Vaccume Pump Spare Parts 1 to 3 HP Rotor casing |
| 1011 | Z) Vaccume Pump Spare Parts 1 to 3 HP Liquid diflector |
| 1012 | Z) Vaccume Pump Spare Parts 4 to 5 HPBearing |
| 1013 | Z) Vaccume Pump Spare Parts 4 to 5 HP Impeller Key |
| 1014 | Z) Vaccume Pump Spare Parts 4 to 5 HP Pump bush |
| 1015 | Z) Vaccume Pump Spare Parts 4 to 5 HP Air fan |
| 1016 | Z) Vaccume Pump Spare Parts 4 to 5 HP Sturnut key |
| 1017 | Z) Vaccume Pump Spare Parts 4 to 5 HP Bearing plate both side |
| 1018 | Z) Vaccume Pump Spare Parts 4 to 5 HP Mechanical seal |
| 1019 | Z) Vaccume Pump Spare Parts 4 to 5 HP Gland rope |
| 1020 | Z) Vaccume Pump Spare Parts 4 to 5 HP Gland bush |
| 1021 | Z) Vaccume Pump Spare Parts 4 to 5 HP Gland plate |
| 1022 | Z) Vaccume Pump Spare Parts 4 to 5 HP Rotor fitted shaft |
| 1023 | Z) Vaccume Pump Spare Parts 4 to 5 HP Latern Ring |
| 1024 | Z) Vaccume Pump Spare Parts 4 to 5 HP Rotor G.M. |
| 1025 | Z) Vaccume Pump Spare Parts 4 to 5 HP Fan cover |
| 1026 | Z) Vaccume Pump Spare Parts 4 to 5 HP Spacer |
| 1027 | Z) Vaccume Pump Spare Parts 4 to 5 HP Bearing housing |
| 1028 | Z) Vaccume Pump Spare Parts 4 to 5 HP Neck Ring |
| 1029 | Z) Vaccume Pump Spare Parts 4 to 5 HP Port plate |
| 1030 | Z) Vaccume Pump Spare Parts 4 to 5 HP Flage (delevery/ section) |
| 1031 | Z) Vaccume Pump Spare Parts 4 to 5 HP Shaft sleve |
| 1032 | Z) Vaccume Pump Spare Parts 4 to 5 HP Suction & delivery chember |
| 1033 | Z) Vaccume Pump Spare Parts 4 to 5 HP Steter fitted motorbody |
| 1034 | Z) Vaccume Pump Spare Parts 4 to 5 HP Tie rod |
| 1035 | Z) Vaccume Pump Spare Parts 4 to 5 HP Rotor casing |
| 1036 | Z) Vaccume Pump Spare Parts 4 to 5 HP Liquid diflector |
| 1037 | A.A. ) Assesaries in control panel & Starter spare parts Starter reley i) 6 to 10A. |
| 1038 | A.A. ) Assesaries in control panel & Starter spare parts Starter reley ii) 9 to 14 A. |
| 1039 | iA.A. ) Assesaries in control panel & Starter spare parts Starter reley ii) 13 to 21 A |
| 1040 | A.A. ) Assesaries in control panel & Starter spare parts Starter reley iv) 19 to 27 A |
| 1041 | A.A. ) Assesaries in control panel & Starter spare parts Starter reley v) 21 to 32 A |
| 1042 | A.A. ) Assesaries in control panel & Starter spare parts Starter reley v) 30 to 42 A |
| 1043 | A.A. ) Assesaries in control panel & Starter spare parts Starter reley v) 40 to 65 A |
| 1044 | A.A. ) Assesaries in control panel & Starter spare parts Starter reley v) 60 to 90 A |
| 1045 | A.A. ) Assesaries in control panel & Starter spare parts Starter reley v) 90 to 120 A |
| 1046 | A.A. ) Assesaries in control panel & Starter spare parts Starter reley v) 120 to 150 A |
| 1047 | A.A. ) Assesaries in control panel & Starter spare parts Starter reley v) 150 to 180 A |
| 1048 | Starter no volt & over load coil |
| 1049 | Contactor set full i) S. K. -1 |
| 1050 | Contactor set full ii)M.L. -1 |
| 1051 | Contactor set full iii) M.L. -2 |
| 1052 | Contactor set full iv) M.L. -3 |
| 1053 | Contactor set full v) M.L. - 4 |
| 1054 | Contactor set full v) M.N. - 45 |
| 1055 | Contactor set full v) M.N. - 65 |
| 1056 | Contactor set full v) M.N. - 90 |
| 1057 | Contactor set full v) M.N. - 120 |
| 1058 | Contactor set full v) M.N. - 150 |
| 1059 | Contactor set full v) M.N. - 180 |
| 1060 | Reley plate (kit) |
| 1061 | Contactor point kit i) M. K. -1 |
| 1062 | Contactor point kit ii) M.L. -1 |
| 1063 | Contactor point kit iii) M.L. -2 |
| 1064 | Contactor point kit iv) M.L. -3 |
| 1065 | Contactor point kit v) M.L. - 4 |
| 1066 | Contactor point kit vi) M.N. - 45 |
| 1067 | Contactor point kit vii) M.N. - 65 |
| 1068 | Contactor point kit viii) M.N. - 90 |
| 1069 | Contactor point kit ix) M.N. - 120 |
| 1070 | Contactor point kit x) M.N. - 150 |
| 1071 | Contactor point kit xi) M.N. - 180 |
| 1072 | i) Fuse grip 16 A. |
| 1073 | ii) Fuse grip 32 A. |
| 1074 | iii) Fuse grip 63 A. |
| 1075 | iv) Fuse grip 100 A |
| 1076 | v) Fuse grip 200 A.. |
| 1077 | vi) Fuse grip 300 A.. |
| 1078 | Fuse Basei) 16 A. |
| 1079 | Fuse Baseii) 32 A. |
| 1080 | Fuse Baseiii) 63 A. |
| 1081 | Fuse Baseiv) 100 A. |
| 1082 | Fuse Basev) 200 A. |
| 1083 | Fuse Basevi) 300 A. |
| 1084 | Connector Plate |
| 1085 | Connector Plate i) Volt meter 0-440 Volt small |
| 1086 | Connector Plate ii) Volt meter 0-440 Volt Big |
| 1087 | Ampear meter i) 0 to 15 A. |
| 1088 | Ampear meter ii) 0 to 50 A. |
| 1089 | Ampear meter iii) 0 to 100 A. |
| 1090 | Ampear meter iv) 0 150 A. |
| 1091 | Ampear meter iv) 0 300 A. |
| 1092 | Capacitor 1 K.V.A.R. |
| 1093 | Single Phasing Preventor |
| 1094 | Water Level Guardwith 60 M. wire |
| 1095 | On-Off Rotery switch |
| 1096 | Volt meter / Ampere meter switch |
| 1097 | Neon Indicator Lamp |
| 1098 | Main Switch 440 Volt three phase i) 16 A. |
| 1099 | Main Switch 440 Volt three phase ii) 32 A. |
| 1100 | Main Switch 440 Volt three phase iii) 63 A. |
| 1101 | Main Switch 440 Volt three phase iv) 100 A. |
| 1102 | Main Switch 440 Volt three phase v) 200 A. |
| 1103 | Main Switch 440 Volt three phase vi) 300 A. |
| 1104 | M.C.B.Unit i) 32 A. |
| 1105 | M.C.B.Unit ii) 63 A. |
| 1106 | M.C.B.Unit iii) 100 A. |
| 1107 | M.C.B.Unit iv) 200 A. |
| 1108 | M.C.B.Unit iv) 300 A. |
| 1109 | H.R. C. Fuse i) 100 A. |
| 1110 | H.R. C. Fuse ii) 125 A. |
| 1111 | H.R. C. Fuse iii) 200 A. |
| 1112 | H.R. C. Fuse iv) 300 A. |
| 1113 | Aquazilary Coil |
| 1114 | Timer Coil |
| 1115 | C.T. coil i) 60 A. |
| 1116 | C.T. coil ii) 100 A. |
| 1117 | C.T. coil iii) 200 A. |
| 1118 | C.T. coil iii) 300 A. |
| 1119 | Tog Tester |
| 1120 | Multi meter |
| 1121 | Insulation Tester |
| 1122 | Meger |
| 1123 | Hand gloves - 1 pair (Rubber) |
| 1124 | Insulated Rubber Matting |
| 1125 | To Arthing with arthing 300 x 300 x 50 m.m. arthing plate,G I. pipe & arthing wire |
| 1126 | To Arthing with arthing 450 x 450 x 50 m.m. arthing plate, G I. pipe & arthing wire |
| 1127 | Arthing wire 14 to 6 guage |
| 1128 | Starter D.O.L i) 1 to 5 HP |
| 1129 | star deltaii)5 to 50 HP |
| 1130 | iii) Star Delta auto 10 to 20 HP |
| 1131 | iv) Auto transfarmer starter 20 to 40 HP |
| 1132 | v) Star Delta auto 21 to 30 HP |
| 1133 | vi) Auto transfarmer starter 31 to 50 HP |
| 1134 | vii) Auto transfarmer starter 51 to 70 HP |
| 1135 | viii) Auto transfarmer starter 71 to 90 HP |
| 1136 | Transfarmer coil rewinding with copper wire in transfarmer starter. without returning old copper wire. |
| 1137 | Change over switch 50 A. 3 phase |
| 1138 | Change over switch 100 A. 3 phase |
| 1139 | Change over switch 200 A. 3 phase |
| 1140 | Buz bar 30 to 50 HP |
| 1141 | Buz bar 51 to 90 HP |
| 1142 | Transfarmer Oil |
| 1143 | Borewell Yield Test with 3.00 HP Pump |
| 1144 | Borewell Yield Test with electric generating set |
| 1145 | 1.5 HP submersible pump set ( Pump upto 20 Stages ) Providing erecting and giving test of 100 mm dia submersible pump set confirming to IS 8034 and Motor confirming IS 9283 |
| 1146 | 2.0HP submersible pump set ( Pump upto 20 Stages ) Providing erecting and giving test of 100 mm dia submersible pump set confirming to IS 8034 and Motor confirming IS 9283 |
| 1147 | 2.5 HP submersible pump set ( Pump upto 20 Stages ) Providing erecting and giving test of 100 mm dia submersible pump set confirming to IS 8034 and Motor confirming IS 9283 |
| 1148 | 3.0 HP submersible pump set ( Pump upto 20 Stages ) Providing erecting and giving test of 100 mm dia submersible pump set confirming to IS 8034 and Motor confirming IS 9283 |
| 1149 | 4.00 HPsubmersible pump set ( Pump upto 20 Stages ) Providing erecting and giving test of 100 mm dia submersible pump set confirming to IS 8034 and Motor confirming IS 9283 |
| 1150 | 5.00 HP submersible pump set ( Pump upto 20 Stages ) Providing erecting and giving test of 100 mm dia submersible pump set confirming to IS 8034 and Motor confirming IS 9283 |
| 1151 | Supplying and eracting submersibal pump set 0.75 kw/ 1HP Withv 50 cycles as Supply Sutabel for 100 mm dia borewell. Suitable for 10 to 50 LPM Discgarge at 7020 M and (Max Efficiency at 52 m. head 30 LPM Discharge) & Delivery pipe of 32mm diameter with nacessary H.type clamp as perspecification No.WP SMP |
| 1152 | Supplying and eracting 3cpre pvc.insulated flat flexible submersibal cable with Copper conductor, Pvc Insulated and pvc sheathed 3 core 2.5 sq.mm |
| 1153 | Supplying and eracting 3cpre pvc.insulated flat flexible submersibal cable with Copper conductor, Pvc Insulated and pvc sheathed 3 core 4 sq.mm |
| 1154 | Providing[ suplying & in standard lengts MDPL Pipes. Conforming to I.S.O. 4427:1996 / with necessary jointing material like mechanical connectiion I.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joint --- etc complet .PN-16 SDR-9 25 mm |
| 1155 | Providing[ suplying & in standard lengts MDPL Pipes. Conforming to I.S.O. 4427:1996 / with necessary jointing material like mechanical connectiion I.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joint --- etc complet .PN-16 SDR-9 32 mm |
| 1156 | Providing[ suplying & in standard lengts MDPL Pipes. Conforming to I.S.O. 4427:1996 / with necessary jointing material like mechanical connectiion I.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joint --- etc complet .PN-16 SDR-9 40 mm |
| 1157 | Providing[ suplying & in standard lengts MDPL Pipes. Conforming to I.S.O. 4427:1996 / with necessary jointing material like mechanical connectiion I.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joint --- etc complet .PN-16 SDR-9 50 mm |
| 1158 | Providing IsI mark Gi pipe with one coupler of following class and dia including all local and central taxces,octroi[ inspection charges,transportation to storoes etc. complet.IS 1239/2004 25mm dia Medium |
| 1159 | Providing IsI mark Gi pipe with one coupler of following class and dia including all local and central taxces,octroi[ inspection charges,transportation to storoes etc. complet.IS 1239/2004 32 mm dia Medium |
| 1160 | Providing IsI mark Gi pipe with one coupler of following class and dia including all local and central taxces,octroi[ inspection charges,transportation to storoes etc. complet.IS 1239/2004 40 mm dia Medium |
| 1161 | Providing IsI mark Gi pipe with one coupler of following class and dia including all local and central taxces,octroi[ inspection charges,transportation to storoes etc. complet.IS 1239/2004 50mm dia Medium |
| 1162 | Lowering, laying,jointing G.I. Pipes and Specials of following class and dia. Including conveyance from stores to site of works, all labour,giving satisfactory hydraulic testing etc. complet. Either underground or in vertical position, as directed by Engineer - in- Charge25 mm dia medium |
| 1163 | Lowering, laying,jointing G.I. Pipes and Specials of following class and dia. Including conveyance from stores to site of works, all labour,giving satisfactory hydraulic testing etc. complet. Either underground or in vertical position, as directed by Engineer - in- Charge32 mm dia medium |
| 1164 | Lowering, laying,jointing G.I. Pipes and Specials of following class and dia. Including conveyance from stores to site of works, all labour,giving satisfactory hydraulic testing etc. complet. Either underground or in vertical position, as directed by Engineer - in- Charge40 mm dia medium |
| 1165 | Lowering, laying,jointing G.I. Pipes and Specials of following class and dia. Including conveyance from stores to site of works, all labour,giving satisfactory hydraulic testing etc. complet. Either underground or in vertical position, as directed by Engineer - in- Charge50 mm dia medium |
| 1166 | Supplying and erecting automatic control panel for 3ph,415V,AC submersibal/ contrifugal pumpset upto 6 HP consistaing of DOL Starter having relay range 9-14 Amp S.P.P. combined ametuer/voltameter,Phase indicating lump inclose in CRCA power coated vibration proof encloser with IP 54 Protection control panel shoud offer singal phase reversal phase inbalance etc.(similar to LT model no.MUG6/CAT no.ss97756) |
| 1167 | DOL STARTER - Supplying and erecting DOL starter to operate squirrel cage indication motor working on 380-400 V, 3 Ph,50Hz, with no volt coil, overloadelement with necessary materal & connected to supply etc.com.Starter with orignal sheet steel encloserUP to 7.5 HP |
| 1168 | DOL STARTER - Supplying and erecting DOL starter to operate squirrel cage inddication motor working on 380-400 V, 3 Ph,50Hz, with no volt coil, overloadelement with necessary materal & connected to supply etc.com.Starter with orignal sheet steel encloserUP to 10 HP |
| 1169 | F.A.S.D. STARTER Supplying and erecting fully automatic star delta starter to operate-squirel cage inducation motor working on 380 -400 V,3Ph,50Hz with on wolt coil , overload element and on off push button with necessary material & connected to supply etc comp.above7.5 HP to 12.5 HP |
| 1170 | F.A.S.D. STARTER Supplying and erecting fully automatic star delta starter to operate-squirel cage inducation motor working on 380 -400 V,3Ph,50Hz with on wolt coil , overload element and on off push button with necessary material & connected to supply etc comp.above12.5 HP to 20 HP |
| 1171 | F.A.S.D. STARTER Supplying and erecting fully automatic star delta starter to operate-squirel cage inducation motor working on 380 -400 V,3Ph,50Hz with on wolt coil , overload element and on off push button with necessary material & connected to supply etc comp.above20 HP to 25 HP |
| 1172 | F.A.S.D. STARTER Supplying and erecting fully automatic star delta starter to operate-squirel cage inducation motor working on 380 -400 V,3Ph,50Hz with on wolt coil , overload element and on off push button with necessary material & connected to supply etc comp.above25 HP to 40 HP |
| 1173 | Erthing for pumping machinery Supplying and erecting earthing with galvanised cast iron earth plate size 60x60x0.6 cm complet with all materials testing & recording the result as peron EA-EP |
| 1174 | Providing and constructing two taps standpost as paer type design with excavation 15 cm thick PCC(1:3:6) bedding 20 mm thick PCC (1:2:4) concrete for platform of 1.75 m dia with side curd andbucket rest 80mm dia, heavy duty GI [o[e central post duly filled therein with c.c. |
| 1175 | Refikking trenches with available excavated stuff with soft material frist over pipeline& then hard material in 15 mm layers with all leads & lifts including consiladation, surcharging etc. complete |
| 1176 | Providing ,hosting & fixing in position of approved make high density polythylene UV stabilized conforming to IS 12701 water storage tank with necessary connection testing etc. comkplete 9 prior approval of sample by ex. Enginner is necessary before use) Spect. No. as directed by engineer incharge for 200 to 1000 lit. |
| 1177 | Providing ,hosting & fixing in position of approved make high density polythylene UV stabilized conforming to IS 12701 water storage tank with necessary connection testing etc. comkplete 9 prior approval of sample by ex. Enginner is necessary before use) Spect. No. as directed by engineer incharge for1000 to 2000 lit. |
| 1178 | Providing fixing 15 mm dia screw down bib stop tap of brass including necessaary socket union nut complete ( PWD CSR 17-18 P No. 288 I o. 41.4 |
| 1179 | Providingand laying in trenches dia CPVC Pipe including necessary excavation fitting reffiling trenches etc. complete including removing existing pipe line if the same in pwd chewky or as directed etc. complete for 15mm dai. |
| 1180 | Providingand laying in trenches dia CPVC Pipe including necessary excavation fitting reffiling trenches etc. complete including removing existing pipe line if the same in pwd chewky or as directed etc. complete for 20 mm dai. |
| 1181 | Providingand laying in trenches dia CPVC Pipe including necessary excavation fitting reffiling trenches etc. complete including removing existing pipe line if the same in pwd chewky or as directed etc. complete for 25mmdai. |
| 1182 | Providingand laying in trenches dia CPVC Pipe including necessary excavation fitting reffiling trenches etc. complete including removing existing pipe line if the same in pwd chewky or as directed etc. complete for 32 mm dai. |
| 1183 | Providingand laying in trenches dia CPVC Pipe including necessary excavation fitting reffiling trenches etc. complete including removing existing pipe line if the same in pwd chewky or as directed etc. complete for 40mm dai. |
| 1184 | Transformar opening 160 KVR - 200 KVR |
| 1185 | Transformer Rewinding |
| 1186 | Transformer Dismantling |
| 1187 | Transformer Opening and repairing |
| 1188 | Fiber bush for 160 Kvr Transformer |
| 1189 | Fiber bush for 200 Kvr Transformer |
| 1190 | Bush for 160 Kvr Transformer |
| 1191 | Bush 200 Kvr Transformer |
| 1192 | Stand nut set copper |
| 1193 | Copper Stand 8 \" |
| 1194 | Fiber sleeve meter |
| 1195 | Baseplate 160 kvr |
| 1196 | Baseplate 200 kvr |
| 1197 | Insulating wwire20mm |
| 1198 | connector for 160 Kvr |
| 1199 | connector for 200 Kvr |
| 1200 | 2HP Pully gear for filter plant |
| 1201 | Gear box bearing for 2 HP Pulley ggear |
| 1202 | Gear oil |
| 1203 | ss shoft 32 mm |
| 1204 | ss shoft 40 mm |
| 1205 | Sleeve (ss) 32 mm |
| 1206 | Sleeve (ss) 40 mm |
| 1207 | Bush 32 mm |
| 1208 | Bush 40mm |
| 1209 | Bush opening and fitting |
| 1210 | Startar 3 To 5 HP |
| 1211 | Startar 1 to3 HP |
| 1212 | Union25mm |
| 1213 | Union40 mm |
| 1214 | Union50 mm |
| 1215 | Bend25mm |
| 1216 | Bend 40 mm |
| 1217 | Bend 50mm |
| 1218 | Nipple25mm |
| 1219 | Nipple32m |
| 1220 | Nipple40mm |
| 1221 | Nipple50mm |
| 1222 | Panel Bord |
| 1223 | Cap (Bore Cap) |
| 1224 | Nut Bolt3\" |
| 1225 | Coupling 2 \" |
| 1226 | Rubber Sheet 2 \" |
| 1227 | 11 To 15 Monobloc motor Rewinding |
| 1228 | Bearing |
| 1229 | Bush Sheft celling |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
Completed