Tender For Construction Of Intake Chamber, Chain Link Fencing, River Crossing, Approach Path, Operators Quarter, Pst, Sr , 10 No Sluice Chambers Road Restoration/ Concrete Path And Create Protection Work For Wss Uranhal Under Jal Jeevan Mission Part
Tender Value
2.63 Crore
Estimated cost
Bid Submission
03 Jan 2023
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bijbehara → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Intake Chamber, Chain Link Fencing, River Crossing, Approach Path, Operators Quarter, Pst, Sr , 10 No Sluice Chambers Road Restoration/ Concrete Path And Create Protection Work For Wss Uranhal Under Jal Jeevan Mission Part 2Nd
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed |
| 2 | a) All Kinds of Soil |
| 3 | Earth work in excavation over areas exceeding 30 cm and upto 1.5 m in depth 1.5 m in width as well as 10 sqm on plan inculding disposal of excavated soil upto50 mt from cutting edge. |
| 4 | a) All Kinds of soil |
| 5 | b)Ordinary rock |
| 6 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50meters and lift upto 1.5 m,as directed by Engineer-in-Charge. |
| 7 | a) All Kinds of soil |
| 8 | Extra for every additional lift of 1.5m or part thereof. |
| 9 | Providing of wire Crates |
| 10 | Providing and laying of dry stone soling tightly hand packed on horizontal levels 50 mm size in layers. |
| 11 | Providing and laying of1:4:8 nominal mix cement concrete . |
| 12 | Providing and hand packing of boulders of required size into wire creates |
| 13 | Cost of Boulders filled behind the Crates |
| 14 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing & Reinforcement all work up to plinth level (1:1.5:3) 1 cement, 1.5 course sand, 3 graded stone aggregate 20 mm nominal size) |
| 15 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing & Reinforcement all work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size |
| 16 | Reinforced cement concrete work in arches ribs domes vaults shells folded plate and roofs having slope more than 15°up to floor five level excluding cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 mix (01 cement, 1.5 course sand, 03 stone aggregate of 20mm nominal size). |
| 17 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth & string courses, fillets, columns, pillars, piers, abutments, posts & struts etc. up to floor five level excluding the cost of centring, shuttering,finishing & reinforcement 1:1:2 (1cement, 1 course sand, 2graded crushed stone) aggregate 20mm nominal size. |
| 18 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15degree, landings, balconies shelves, chajjas, lintels, bands, plan window sills, stair cases and spiral stair cases up to floor five level excluding the cost of centring, shuttering, finishing and reinforcement in 1:1.5:3 mix ( 1 cement, 1.5 coarse sand, 3graded stone aggregate ) 20 mm nominal size. |
| 19 | Centring and shuttering including strutting propping and removal of form work. |
| 20 | a) Foundations |
| 21 | b) Walls |
| 22 | c) Beams, Lintels etc |
| 23 | d) Suspended Floors, Roofs, Landings etc |
| 24 | e) Arches, Domes etc upto span 6mtr |
| 25 | f) Edges of Slabs & breaks in floor walls |
| 26 | Extra for Shuttering in Circular Works |
| 27 | i)Foundations |
| 28 | ii) Walls |
| 29 | iii) Beams |
| 30 | iv) Domes |
| 31 | v)Extra for Domes Exceeding 6mtr Span |
| 32 | 12 mm thick cement plaster in 1:3 mix with floating coat of neat cement (1 cement, 3 fine sand). |
| 33 | 12mm Cement plaster of mix: |
| 34 | 1 : 4 ( 1 cement : 4 fine sand) |
| 35 | 1 : 6 ( 1 cement : 6 fine sand |
| 36 | Providing Reinforcement to RCC works including bending, binding, cutting, straitening and placing in position complete. |
| 37 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 38 | Extra for providing and mixing water proofing material in cement conc work in doses by weight of cement as per manufacturing specifications |
| 39 | Structural steel works welded in builtup sections, trusses and framed works including cutting, hoisting, fixing in position and applying a priming coat of approved metal primer complete. |
| 40 | R.R. Masonary with Quary stone laid in 1:6 CM. |
| 41 | RR Masonary with quairy stone laid in dry |
| 42 | Providing and laying of 50mm thick DPC band over stone work in 1:2:4 nominal mix. |
| 43 | Pointing on stone work with cement mortar in 1:3 mix. (Flush type) |
| 44 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :1:4 CM. |
| 45 | Extra over Brickwork in super structure upto floor V level. |
| 46 | Providing and fixing of wooden chowkat in Kail Wood. |
| 47 | Providing and fixing of 35mm thick glazed shutters for doors and windows of Kail wood. |
| 48 | Providing and fixing of panelling or penelling and glazing in panelled or panelledand glazed shutters for doors and windows ; penelling 25mm to 40mm thick of Kail wood. |
| 49 | Providing and fixing of 35mm thick wire guage shutters for doors and windows of Kail wood. |
| 50 | Providing 50mm thick cement concrete flooring with floating coat of neat cement. |
| 51 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laidon 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., completeIn all colours, shades, except White, Ivory, Fume Red Brown. |
| 52 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 53 | Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm |
| 54 | P/f of PVC waste pipe of sink including PVC waste fitting complete ( Flexible 40mm dia) |
| 55 | Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size ) |
| 56 | Providing and fixing of corrogated G.S. Sheets including vertical/curved surfaces with polymer coated J or L hooks (0.50mm thick). |
| 57 | Providing ridge or hip of width 60cm over all with plain G.S. Sheets fixed with polymer coated J or L hooks (0.50mm thick). |
| 58 | Prepration of subgrade by excavating earth at avg. of 22.05cm dept dressing chaber & consolidation up to 50mtr |
| 59 | Laying water bound macadam sub-base with brick aggregate & binding |
| 60 | Laying spreading & compacting stone aggerate of specified size to WBM specifaction in uniform thickness |
| 61 | Supply and fixing rolling shutter of approved make made of required size MS lathes interlocked together through their entire length etc. complete with 80x0.90 mm M/S Laths with 0.90mm thick top cover. |
| 62 | Providing and applying white cement based putty of approved thickness 1mm of approved brand and manufacture over the plastered surfaces to prepare the surface smooth and even complate. |
| 63 | Distempering with 1st quality acrylic distemper of approvedbrand and manufacture including applyingadditional coats where ever required to achive even shade. (Two Coats) |
| 64 | Finishing walls with water proofing cement paint of required shade (external) (Snowsum) |
| 65 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shademanufacture to give an even shade; |
| 66 | a)Two or more coats on new work. |
| 67 | b)Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 68 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. |
| 69 | Back-filling of available excavated soil into the trench excluding rock. |
| 70 | Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and sorts of carriages. Complete Job |
| 71 | a) 100 mm Dia G.I |
| 72 | Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments. |
| 73 | a) 100 mm Dia Sluice Valve |
| 74 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge |
| 75 | a) Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe , 25mm OD (SDR-7.4) |
| 76 | b) External work including trenching, refilling etc. PN-16 pipe , 25mm OD (SDR-7.4) |
| 77 | Providing and fixing PPR UnionsPPR Union 25 mm |
| 78 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)25 mm nominal boreGate valve |
| 79 | P/F PVC pipe Prince Type-B and PVC accessories of approved quality incl all costs and carriages |
| 80 | a) 75mm dia |
| 81 | b) 100mm dia |
| 82 | C) 75mm tee |
| 83 | d) 75mm bend |
| 84 | e) 100mm tee |
| 85 | f) 100mm bend |
| 86 | g) 75mm Door bend |
| 87 | h) 75mm Collar |
| 88 | i) 100mm Collar |
| 89 | j) 100mm Floor Trap |
| 90 | k) 100mm P Trap |
| 91 | P/F of Sanitary fittings of approved brand and manufacture |
| 92 | a) Angle Valve |
| 93 | b) Basin mixer/ sink mixer |
| 94 | c) PVC Connections |
| 95 | d) Gyser 50 ltr Capacity |
| 96 | e) Soap case |
| 97 | f) PVC flexible waste pipe |
| 98 | g) CP Waste |
| 99 | h) Bib cock |
| 100 | i) 2 in 1 Bib cock |
| 101 | j) Mirror |
| 102 | k) Health Faucet |
| 103 | Electrification |
| 104 | Heating Points |
| 105 | Lighting Points |
| 106 | Iron Grill for Windows |
| 107 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works. |
| 108 | Windows |
| 109 | Ventillator |
| 110 | Carriage of material from source to dumping site at road by mechanical transport. |
| 111 | a)100mm G.I pipefor avg. lead of 10 Km |
| 112 | a)Cement & Steel for avg. lead of 10 Km |
| 113 | b)Sand (Average 15 Km) |
| 114 | c)20mm aggregate for avg. lead of 15 Km |
| 115 | e) wire crates(10km) |
| 116 | d)40mm aggregate for avg.lead of 15 Km |
| 117 | e)stone Soiling avg.lead of 5 Km |
| 118 | e)Bricks for avg.lead of 15 Km |
| 119 | h) Quarry stones (5 Km) |
| 120 | Extra Carriage of Pipes from nearest dumping site to actual site of work by manual labour for |
| 121 | a)100mm G.I pipefor avg. lead of 500 m |
| 122 | a)Cement/Steel for avg.lead of 500 Mtr |
| 123 | c)Sand &20mm aggregate for avg. lead of 500 Mtr |
| 124 | d)40mm aggregate for avg. lead of 500 Mtr |
| 125 | e)stone Soiling avg.lead of 500 mtr |
| 126 | e) wire crates(500) |
| 127 | e) Quarry Stone 500 Mtr |
| 128 | f) Bricks 500 Mtr |
AI Tender Summary
Tender Timeline
Dec 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender