|
| 1 | Primary Point Wiring with Modular Switch:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessedconduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Surface/Recessed PVC conduit |
| 2 | Wiring for circuit / sub main wiring with following size of FRLS PVC insulated copper conductor 1.1 KV grade single core cable in Surface/ Recess PVC conduit as per specifications etc. complete as required. |
| 3 | a) 2x1.5 sq mm + 1x1.5 sq mm Earth wire |
| 4 | b) 4x1.5 sq mm + 1x1.5 sq mm Earth wire |
| 5 | d) 2x4 sq mm + 1x4 sq mm Earth wire |
| 6 | e) 4x4 sq mm + 2x4 sq mm Earth wire |
| 7 | Supplying & drawing following size FRLS PVC insulated copper conductor 1.1 KV grade single core cable in existing surface/ recess MS conduit/ PVC conduit/ PVC casing capping/ Al. casing capping as per specifications etc. complete as reqd. |
| 8 | a) 3x1.5 sq mm |
| 9 | b) 3x4 sq mm |
| 10 | Supplying and fixing of following size of medium class PVC conduit along with all accessories in surface/recess including cuttingthe wall and making good the same in case of recessed conduit as required. |
| 11 | c) 20 mm dia PVC conduit |
| 12 | d) 25 mm dia PVC conduit |
| 13 | Supplying and fixing suitable size PVC box with modular plateand cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modularswitch, connections etc. as required. |
| 14 | Supplying and fixing suitable size PVC box with modular plateand cover in front on surface or in recess, including providingand fixing 6 pin 5/6 A & 15/16 A modular socket outlet and15/16 A modular switch, connections etc. as required. |
| 15 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copperbusbar,commonneutrallink,earthbar,dinbarfor mounting MCBs (but without MCBs and incomer) as required.a) 4 way TPN double door |
| 16 | S/F of 6A to 32A rating 240/415V ,10 KA,\"C\" curveMCBsuitable for inductiveload of following polesin the existing MCBDB complete withconnectionstesting and commissioningetc.as reqd. |
| 17 | a) 6 to 32 amp SP |
| 18 | b) 6 to 32 Amp TP |
| 19 | c) 63 A TPN MCB |
| 20 | Supplying& laying of following size XLPE Copper Conductor armoured cable of 1.1 KV grade as per specification complete as reqd.a) 4x6 Sq mm |
| 21 | Supplying & Making end terminations with brass compression Gland & heavy duty copper crimping lugs for following size XLPE armoured cable of 1.1 KV grade etc complete as reqd. a) 4x6 Sq mm |
| 22 | Supplying Decorative LED box type fittings with BLUE coloured end cap pre wired for LED tube and LED tubular lamp including testing etc asrequired.Make Crompton/Wipro/Phillips/Syska a) 20 watts LT8-20 (PC body) &DMLN1LT8-16or equivalent |
| 23 | Supplying and fixingtwo module stepped type electronic fan regulator (100W) on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 24 | Supplying of following size A/C single phase ceiling fan with all accessories i/c it\"s connection with 1.5 sq mm flexible Cu. wire from ceiling rose etc. complete as reqd. a)1200 mm sweep ceiling fan 5 Star |
| 25 | S/F of call bell/buzzer suitable for 230 Volt A/C supply i/c connection etc complete as reqd. a) Ding Dong type type |
| 26 | Supplying & fixing of Fan hook with 10 mm dia. rod & 4 nos. anchor fasteners i/c clamp etc. complete as reqd. |
| 27 | S/L of following size of Cu/GI bare earth wire along with the cables/conduits/panels for loop earthing i/c lugging, crimping as per specifications etc. complete as reqd. a) 2.24 mm dia Copper wire |
