Military Engineer Services-MES has published Tender For Provision Of Amf Panel Lt Cable Street Light Timer Shed And Associated Work For Dg Sets At Af Stn Memaura. Submission Date for this Tender is 14-02-2023. Diesel Generators Tenders in Lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Jan-2023 | Critical dates corrigendum | Date | 30-01-2023 |
| 2 | 20-Jan-2023 | Specification and make of Panel | Other | 30-01-2023 |
| 3 | 28-Jan-2023 | extension of bid submission end date | Date | 02-02-2023 |
| 4 | 02-Feb-2023 | Make of LT panels | Other | 07-02-2023 |
| 5 | 02-Feb-2023 | Extention of Bid submission end date 07 Feb 2023 | Date | 07-02-2023 |
| 6 | 07-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-02-2023 |
| Sl. No. | Item Description |
| 1 | Excavation in post holes or (similar holes) each n exc 0.50 Cum in soft/loose soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 2 | M&L PCC 1:2:4type B-2 (using 40mm graded stone aggregates) infoundation fillings and mass concrete complete all as specified and directed. |
| 3 | S/F steel works in tubular truss, purlins, post etcincluding special shaped washers etc complete using ERW or induction butt welded tubes conforming to I.S. 1161 -1979 grade St-240 including one shop coat of Zinc Chromate Primer paint at contractors workshop before fabrication complete all as specified and directed. |
| 4 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thickof any colour having tensile strength of 550Mpa as in ridge ,valley gutter etc andfixed with self tapping screws and flat ironcomplete all as specified and directed. |
| 5 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 6 | M & L for preparation of New un-treated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 7 | Supply, installation, testing & commissioning of cubical type, floor mounted outdoor type front operated AMF Panel suitable for 125 KVA DG set with bypass arrangement fabricated with 3.15 mm thick CRCA sheet CPRI Approved duly powder coated in RAL 7035 paint, Angle stand 50mmx50mmx6mm of length 450 mm from ground including grouting of AMF Panel 30 cm above the ground level and all four corners embedded in PCC platform casted in 1:2:4 type B-1, 30 cm from ground level and comprising of following provisions as per details given below. Incoming (Main) : 200 A FP MCCB thermally adjustable between 70 to 100%,25 KA breaking capacity, Make : C&S/L&T/Legrand - 01 No. Incoming (DG Set) : 200 A FP MCCBthermally adjustable between 70 to 100% 25 KA,Make :C&S/L&T/Legrand - 01 No. Automatic transfer switch (ATS) with controller open execution type 250 A, 4 Pole. Make : HPL / L&T- 01 No. BUS-BAR : 400A TPN Electrolytic Aluminium and insulated with PVC Sleeving - 01 Set Instrument : Digital Multifunction meter with CT Coils, DC Voltmeter,Battery Charger 12 Volt, LED Indicating Light with 6A Protection MCBs - 01 Set. complete with internal power connection and control wiring from DG Set to AMF Panel not exc.20 mtrs. |
| 8 | Supply,installation, testing & commissioning of cubical type,floor mounted outdoor type front operated AMF Panel suitable for 50 KVA DG set with bypass arrangement fabricated with 3.15 mm thick CRCA sheet CPRI Approved duly powder coated in RAL 7035 paint, Angle stand 50mmx50mmx6mm of length 450 mm from ground, including grouting of AMF Panel 30 cm above the ground level and all four corners embedded in PCC platform casted in 1:2:4 type B-1, 30 cm from ground level and comprising of following provisions as per details given below. Incoming (Main) : 125 A FP MCCB thermally adjustable between 70 to 100%,16 KA,Make : C&S/L&T/Legrand - 01 No. Incoming (DG Set) : 125 A FP MCCB thermally adjustable between 70 to 100%16 KA,Make :C&S/L&T/Legrand - 01 No. Automatic transfer switch (ATS) with controller open execution type 125 A, 4 Pole. Make : HPL / L&T- 01 No. BUS-BAR : 250A TPN Electrolytic Aluminium and insulated with PVC Sleeving - 01 Set Instrument : Digital Multifunction meter with CT Coils,DC Voltmeter,Battery Charger 12 Volt,LED Indicating Light with 6A Protection MCBs - 01 Set. complete with internal power connection and control wiring from DG Set to AMF Panel not exc.20 mtrs. |
| 9 | Supply, installation, testing & commissioning of cubical type,floor mounted outdoor type front operated AMF Panel suitable for 30 KVA DG set with bypass arrangement fabricated with 3.15 mm thick CRCA / MS steel sheet duly powder coated in RAL 7035 paint,Angle stand 50mmx50mmx6mm of length 450 from ground including grouting of AMF Panel 30 cm above the ground level and all four corners embedded in PCC platform casted in 1:2:4 type B-1, 30 cm from ground level and comprising of following provisions as per details given below. Incoming (Main): 100 A FP MCCB thermally adjustable between 70 to 100% 16 KA, Make: C&S/L&T/Legrand - 01 No. Incoming (DG Set) : 100 A FP MCCB thermally adjustable between 70 to 100%16 KA, Make:C&S/L&T/Legrand - 01 No. Automatic transfer switch (ATS) with controller open execution type 100 A, 4 Pole. Make : HPL / L&T- 01 No. BUS-BAR : 200A TPN Electrolytic Aluminium and insulated with PVC Sleeving - 01 Set Instrument : Digital Multifunction meter with CT Coils, DC Voltmeter,Battery Charger 12 Volt, LED Indicating Light with 6A Protection MCBs - 01 Set. complete with internal power connection and control wiring from DG Set to AMF Panel not exc.20 mtrs. |
| 10 | Supply, installation, testing & commissioning of Cubical type,floor mounted Indoor type double door LT panel fabricated with 2.00 mm CRCA sheet duly powder coated in RAL 7035 paint,Angle stand 50mmx50mmx6mm of length 450 from ground including grouting of LT Panel 30 cm above the ground level and all four corners embedded in PCC platform casted in 1:2:4 type B-1, 30 cm from ground level and comprising of following provisions as per details given below. Incoming : 200A FP MCCB thermally adjustable between 70 to 100%,25KA,Make:C&S/L&T/Legrand - 01 No. Multi function Meter Make: C&S/L&T/Legrand - 01 Set. LED Indicating Lamp R,Y,B Make: C&S/L&T/Legrand - 01 Set of three Aluminium BUS-BAR with epoxy based FRP insulator 400A TPN - 01 Set, Outgoing : 100 A FP MCCBthermally adjustable between 70 to 100% 16 KA Make:C&S/L&T/Legrand - 02 Nos. 63A FP MCCBthermally adjustable between 70 to 100% 16 KA Make:C&S/L&T/Legrand - 02 Nos. Street light timer -02 sets,comprising of following accessories in each set as per details given below :- a) Astronomical type Time Switch (operated on 230 Volts, AC, 50 Hz) programmable with digital display, automatic caculation for ON and OFF switching matching with the changes the sun rise and sun set timing,back kit LCD Din rail mounting single channel ( Make: Legrand Cat No: 4126 54/ L&T Cat No: AUTS02AST00) Complete with b) Power contactor 4 Pole - 01 No 63 Amp rating DIN rail mounting with entry terminals (Make : Legrand Cat No: 4125 56/ L&T Cat No: CS97014/C&S ) c ) MCB TPN 63 Amp rating - 01 No (Make : Legrand Cat No: 4086 83/ L&T Cat No: BB400630C/ C&S ) d) Change Over switch, two way 20 Amp rating - 01 No,250 Volts, DIN rail mounting ( Make: Legrand Cat No: 4129 01/ L&T Cat No : AUC00202500 ) |
| 11 | Supply, Installation, Testing and Commissioning of Maintenance Free Earthing based on 3 meters long copper Earthing Electrode 50 mm outer dia and 1.2 mm thickness duly filled with CCM and electrode should be fixed/brazing with 20 x 3 mm copper strip incl excavation/earth work in any strata and with PVC earth pit cover (EarthPit not less than 3M deep below Gd level). The Electrode is surrounded by BFC Chemical.earth resistance value should be less than 01 Ohm. Chemical compound powder (BFC) to be provided minimum 50 kg per site. Copper Strip size: 20 x 3 mm shall be provided upto 7.5 meters including earth pit PVC cover and Earth Test point complete all as specifiedand directed.including demolition of existing earth pit. Note : After completion of earthing pit earth earth resistance will be measured & if earth resistance found not satisfactory the same will be done again.the cost is deemed to be included inthe quated rate. |
| 12 | Supply, laying and testing ofLT cable 1100 volt grade XLPE insulatedunderground electric cable PVC bedded andsheathedsteel wire/strip armoured aluminum stranded conductor of size 95 Sqmm 3.5 core. |
| 13 | Supply, laying and testing ofLT cable 1100 volt grade XLPE insulatedunderground electric cable PVC bedded andsheathedsteel wire/strip armoured aluminum stranded conductor of size 35 Sqmm 3.5 core. |
| 14 | Supply, laying and testing ofLT cable 1100 volt grade XLPE insulatedunderground electric cable PVC bedded andsheathedsteel wire/strip armoured aluminum stranded conductor of size 25 Sqmm 3.5 core. |
| 15 | Supply, laying and testing ofLT cable 1100 volt grade XLPE insulatedunderground electric cable PVC bedded andsheathedsteel wire/strip armoured aluminum stranded conductor of size 70 Sqmm 3.5 core. |
| 16 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr depth for laying cable and getting out soft/loose soil complete all as specified and directed by Engr-in-charge. |
| 17 | Removing excavated material to a distance n. exc 50 mtr and depositing where as directed as a level n.exc 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge. |
| 18 | Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed by Engr -in-charge. |
| 19 | Supply and laying burnt briksin trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and directed. |
| 20 | M&l sand cushioning 8cm below the cable and 15cm above the cable for cableprotection in trenches complete all as specified and directed by Engr-in-charge. Note:- After cushioning total thickness measured as 18 cm. |
| 21 | Supplying and fixing in replacement Galvanised mild steel pipe /tubing,light grade 50 mm dia complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified and directed :- (Excavation & Earth work ,Mild steel clamps, bolts , nuts and washers shall be measured and paid separately). |
| 22 | Boring holeshorizontally under road without damaging the surface of road ( minimum 1.0 Metre below the road surface with the help of GI tubing not exc 80 mm bore(dia) for passing UG cable, complete all as specified and as directed. NOTE : - GI Pipe laid will be measured and paid separately under respective item |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
