|
| 1 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed withall leads, lifts etc. BDW 8 46.09 - As directed byEngineer in charge. |
| 2 | Dismantling stone masonry in Mud including stacking the materials as directed with all leads,lifts etc. complete. BDW 8 46.10 - As directed byEngineer in charge. |
| 3 | Removing mud plaster including disposing of the spoils as directed with all leads, lifts etc,complete. BDW 8 46.23 - As directed byEngineer in charge. |
| 4 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, includingremoving the excavated material up to a distanceof 50 m. beyond the building area and stackingand spreading as directed, dewatering, preparingthe bed for the foundation and necessary backfilling, ramming, watering including shoring andstrutting etc. complete. (Lift upto 1.5 m.)By Mechanical Means BDA 1 21.02 - Bd.A.1 PageNo. 259 |
| 5 | Excavation for foundation in hard murum including removing the excavated material uptodistance of 50 metres beyond the building areaand stacking and spreading as directed,dewatering, preparing the bed for the foundationand necessary back filling, ramming, wateringincluding shoring and strutting etc. complete.(Lift upto 1.50 m)By Mechanical Means BDA 2 21.06 - Bd.A.2 PageNo. 259 |
| 6 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushedsand/grit, ramming, watering etc. complete. BDA21.40 - As directed by Engineer in charge. |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzit/ gneiss metal for foundation andbedding including bailing out water, formwork,laying/pumping, compacting, roughening them ifspecial finish is to be provided, finishing ifrequired and curing complete, with fullyautomatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/concreteBatch mix plant (Pan mixer) etc. complete. Withnatural sand/V.S.I. quality Artificial Sand BDE 124.01 - Bd. E. 1 Page No. 287 |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/granite/quartzite/gneiss metal for bed blocks,foundation blocks and such other items includingbailing out water, plywood/steel formwork,laying/ pumping, compacting, roughening them ifspecial finish is to be provided, finishing unevenand honeycombed surface and curing etc.complete. The Cement Mortar 1:3 plaster isconsidered for rendering uneven andhoneycombed surface only. Newly laid concreteshall be covered by gunny bag, plastic, tarpaulinetc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLCwith SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. qualityArtificial Sand BDE 4 24.10 - Bd.E.4 Page No.289 and B-7, Page No.38 |
| 9 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar1:6 in foundations and plinth of inner walls/ inplinth external walls including bailing out watermanually , striking joints on unexposed faces,raking out joints on exposed faces and wateringetc. Complete. BDF 27.01 41 26.116 - |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/granite/quartzite/gneiss metal for coping toplinth or parapet, moulded or chamfered as perdrawing or as directed including steel centering,plywood/ steel formwork compacting, rougheningthem if special finish is to be provided, finishinguneven and honeycombed surface and curingetc. complete. The Cement Mortar 1:3 plaster isconsidered for rendering uneven andhoneycombed surface only. Newly laid concreteshall be covered by gunny bag, plastic, tarpaulinetc. (Wooden centering will not be allowed.) BDE3 24.16 - Bd.E. 3/Page No. 288/I.S. 456 (2000) |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite /quartzite/ gneiss metal for R.C.C. PARDI of reqdthk. as per detailed designs and drawingsincluding centering, formwork, cover blocks,laying/pumping, compaction finishing the formedsurfaces of sufficient minimum thickness to givea smooth and even surface or roughening ifspecial finish is to be provided and curing etc.complete,(Excluding reinforcement and structuralsteel).with fully automatic micro processor basedPLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. qualityArtificial Sand BDF 11 P.NO.304,B7 P.NO.38 |
| 12 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neerufinish, to concrete, brick surface, in all positionsincluding scaffolding and curing etc.complete.BDL 4 32.07 - Bd.L.4 Page No. 368 |
| 13 | Providing sand faced plaster externally in cement mortar using approved screened sand, in allpositions including base coat of 15 mm thick incement mortar 1:4 using waterproofingcompound at 1 kg per cement bag curing thesame for not less than 2 days and keeping thesurface of the base coat rough to receive thesand faced treatment 6 to 8 mm thick in cementmortar 1:4 finishing the surface by taking outgrains and curing for fourteen days scaffoldingetc.complete. BDL 3 32.11 - Bd.L.3 Page No. 368 |
| 14 | Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonrysurfaces in all positions with base coat of 12 to15 mm thick in C.M. 1:4 and rough casttreatment 12mm thick in proportion 1:1 1/2:3including scaffolding and fourteen days curingcomplete. BDL 7 32.12 - Bd.L.7 Page No. 369 |
| 15 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm andconfirming to IS 15622-2006 (Group-B IIA) forantiskid flooring in required position laid on a bedof 1:4 cement mortar including cement float,filling joint with cement slurry cleaning curingetc. complete. BDM 33.67 - Bd. M-12 page No.385 |
| 16 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVINGBLOCKS of 60 millimeter thickness of having astrength of 400 Kg/sq.m of approved quality andshape on a bed of crushed sand of 25 to 30millimeter thick including striking joints andcleaning etc. complete. (using 100% crushedsand) BDM 33.53 - As directed by Engineer incharge |
| 17 | Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb with gutter ( asper IRC 86 1983) embedded 125mm belowground level over M-10 PCC finished neatly withC.M. 1:2, setting the same in C.M. 1:2, includingthe required excavation in any strata andremoving the excavated stuff any where in cityand redoing the surface as specified and directedby Engineering In-charge. Using ConcreteBatching and Mixing Plant MORTH 409 7.03 -MORTH- |
| 18 | Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approveddrawing with all fixtures and fittings in twoleaves with strong hold fast embedded in c.c.block at top and bottom with lockingarrangement including cutting, bending, makingholes and with one coat of primer etc. complete.BDC 23.05 - As directed by Engineer in charge. |
| 19 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, teesetc. as per detailed design and drawings or asdirected including cutting, fabricating, hoisting,erecting, fixing in position making riveted /bolted /welded connections without connectingplates, braces etc. and including one coat ofanticorrosive paint and over it two coats of oilpainting of approved quality and shade etc.complete. BDC 2 23.01 - Bd.C.2 Page No. 275 |
| 20 | Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standarddesign and specifications having various spans in between trusses and in multiples of standardlength of bays as specified as per standardspecifications, inclusive of cost of steel tubulartrusses, tubular columns purlins, tie runners,foundation bolts, base plates, nuts and bolts,welding wherever required etc. as per detaileddrawing inclusive of one coat of anticorrosivepaint and two coats of oil painting of approvedquality and shade etc. complete.Spec. No. : As directed by Engineer-in-charge.BDC 23.07 - B-18 Page No. 78 |
| 21 | Providing fixing Mangalore tile roofing with class AA tiles in cement mortar 1:4 on sloping slabincluding necessary scaffolding, curing, finishing, etc. complete. BDR 38.32 - As directed by Engineer in charge. |
| 22 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material ismanufactured out of nominal 0.45 mm BaseMetal Thickness ( BMT ) (0.5 mm TCT ),Hi-strength steel with min.550 MPa yieldstrength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminium 43.4%zinc 1.6% silicon) with COLORBOND ( R ) steelquality super durable polyester paint coat ( withinorganic pigment). The paint shall have a totalcoating thickness of nominal 35 um, comprisingof nominal 25 um exterior coat on top surfaceand nominal 10 um reverse coat on back surface.Profile sheet shall have nom. 950-1050 mmeffective cover width and nominal 25-30 mmdeep ribs with subtle square fluting in the fivepan at nominal 180-250 mm center-to-center.The end rib shall be designed for anti-capillarygroove. and return leg. The feed material shouldhave coil manufacturers product details marked aregular interval. Including fasteners with min.fastened with min. 25 um Zinc-Tin alloy coated,Hex head, self-drilling screw etc. complete.(weight of profile 4.52 kg/sqm) BDR 3 38.33 -Bd. R. 3A., Page No. 449 |
| 23 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfacesincluding scaffolding if necessary, preparing thesurface by thoroughly cleaning oil, grease, dirtand other foreign matter and sand papering asrequired etc. complete. BDO 8D 35.21 - Asdirected by En-gineer in charge. |
| 24 | Providing and applying two coats of exterior weather shield paint of approved manufactureand of approved colour to the plastered surfacesincluding cleaning ,preparing the plaster surface,applying primer coat ,scaffolding if necessary,and watering the surface for two days etccomplete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary BDO 35.26 - As directed by Engineer in charge. |
| 25 | Providing and applying two coats of synthetic enamel paint of approved colour to new /oldstructural steel work and wood work in buildings,including scaffolding if necessary, cleaning andpreparing the surface (excluding primer coat)etc. complete. BDO 4A 35.07 - Bd.0.4 Page No.405 |
| 26 | Providing and fixing of retro- reflectorised informatory sign board rectangular/Square inshape having area greater than 0.9 square metermade out of 2mm aluminum sheet bonded withwhite retro reflective sheeting of Class B ( TypeIV High intensity micro-prismatic gradesheeting-HIP) having pressure sensitive/heatactivated adhesive retoreflective specified background, border and back side retoreflctivesymbols, letters, numerals, arrow as perIRC:67-2012 Table No 8.3, supported with backsupport frame 25mm x 25mm x 3mm, dulypainted on back side with two coats of grey stoveenamel paint and supported on two no. mildsteel angle iron post 75 mm x 75 mm x 6 mm,3.5 mt long firmly fixed to the ground by meansof properly designed foundation with M25 gradecement concrete 45 cm x 45 cm x 60 cm, 60 cmbelow ground level as per approved drawing Theangle iron post shall be duly painted with onecoat of epoxy primer and two coats of epoxyfinish paints having alternate black and whitebands of 25 cm width including GI fixures andtransportation etc.complete.The nut bolts ofboard with angle iron post/supporting structureafter fixing at site has to be electrically welded.Class B ( Type IV High intensity micro-prismaticgrade sheeting-HIP) sheeting shall have 7 yearswritten warranty from the manufacturer andauthorised distributor/convertor issued for fieldperformance including the screen printed areasand cut-out sheeting and cut-out durabletransparent overlay film and this warrantycertificate in original should be submitted to theEngineer in charge by the contractor/supplier.MORTH 801 6.87 - MORTH 801 |
| 27 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to30cm. breaking clods, dressing to the requiredlines, curves, grades and section, watering andcompacting to not less than 97% of standardProctor density for a lead of over 50m. to 300m.inclusive from the site of excavation to the site ofdeposition as directed. MORTH 305 2.24 -MORTH 501 |
| 28 | Filling in plinth and floors with contractors material/brought from outside and approved byEngineer incharge in layers of 15 cm to 20 cmincluding watering and compaction etc. complete.BDA 11 21.37 - Bd.A.11 Page No. 263 |
| 29 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar1:6 in superstructure including striking joints,raking out joints, watering and scaffolding etc.Complete BDG 4 27.05 - 0 |
| 30 | Providing and laying 100 mm dia salt glazed stoneware pipe including fittings such as bends,tees, single junction, double junctions laying,jointing (including excavation and refilling thetrenches) complete. BDV 38 42.03 - Bd.V.38,Page No. 572 |
| 31 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out ofhigh density polythyler and built corrugatedinclusive of delivery up to destination hoistingand fixing of accessories such as inlet,outletoverflow pipe inclusive of all tanks capacitybetween 200 to 1000 liters BDV 42.53- Asdirected by Engineer in charge. |
| 32 | Providing and laying Rough Shahabad Stone Flooring 40mm.to 45 mm. thick and of requiredwidth in plain/ diamond pattern on a bed of 1:6C.M. including cement float, striking joints,pointing in cement mortar 1:3 curing andcleaning etc. etc. complete BDM 1 33.02 -Bd.M.1 Page No. 379 |
| 33 | Providing flush grooved pointing with cement mortar 1:3 for stone masonry work includingscaffolding and curing etc. complete. BDL 15B32.17 - Bd. L.15 Page No. 372 |
| 34 | Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers,clamps, etc. including necessary excavation,trench filling etc. complete. Including removingexisting pipe line if necessary and conveying andstacking the same in PWD chowky or as directed etc. complete. BDV 60 42.26 - As directed by Engineer in charge. |
| 35 | Providing, laying and fixing P.V.C. pipe of 25mm dia. with fittings such as bends, tees, reducers,clamps, etc. including necessary excavation,trench filling etc. complete. Including removingexisting pipe line if necessary and conveying andstacking the same in PWD chowky or as directedetc. complete. BDV 60 42.23 - As directed byEngineer in charge. |
| 36 | Providing, laying and fixing P.V.C. pipe of 15mm dia. with fittings such as bends, tees, reducers,clamps, etc. including necessary excavation,trench filling etc. complete. Including removingexisting pipe line if necessary and conveying andstacking the same in PWD chowky or as directed etc. complete. BDV 42.21 - As directed by Engineer in charge. |
| 37 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socketunion nut complete. BDV 41.40 - |
| 38 | Providing and fixing 40 mm. dia Ball cock medium type with PVC float including socketsand necessary fittings and tested as permunicipal requirements etc. complete. BDV 42.36- As directed by Engineer in charge. |
| 39 | Providing and fixing 15 mm. dia Ball cock medium type with PVC float including socketsand necessary fittings and tested as permunicipal requirement etc. complete. BDV 42.37- As directed by Engineer in charge. |
| 40 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame withchamfer conforming to I.S. 65241983 having 6mm dia. bars 3 Nos. And stirrups @250 mm c/cand fixing in wall with 6 Nos of hold fast of 12mm dia bars 500 mm long including primer andoil painting etc, complete) frame size 60 mm x100 mm . BDT 39.56 - As directed byEngineer incharge. |
| 41 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS14856 (2000) (Reaffirmed 2006) withoutventilator including chromium plated fixtures andfastening with chromium plated handles on bothsides, etc complete BDT 39.58- As directed byEngineer in charge. |
| 42 | Providing and constructing Brick MasonryInspection Chamber 90cm x 45cm With R.C.C.raft in B.C. soil area including cost ofreinforcement, 1:2:4 cement concrete channelshalf round G.S.W. pipes, Brick Masonry,plastering from inside and airtight with 75 mmthick R.C.C. cover medium duty 140 kg etc.complete. BDV 42.17 - Bd.V.43 Page No. 574 |
| 43 | Providing and filling in the foundation with sand of approved quality including watering,compacting etc. complete. (To be executed withprior approval of Superintending Engineer) BDA13 21.39 - Bd.A.13 Page No. 264 |
| 44 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as perdrawing including fixtures, necessary weldingand painting with one coats of anticorrosive paintand two coats of oil painting complete. BDT40.01 - As directed byEngineer incharge. |
| 45 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams andlintels as per detailed designs and drawings or asdirected including centering, formwork, coverblocks, laying/pumping, compactionandroughening the surface if special finish is to beprovided and curing etc. complete. (Excludingreinforcement and structural steel). with fullyautomatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. Withnatural sand/V.S.I. quality Artificial Sand BDF 325.50 |
| 46 | P/F WOODEN FINISH BENCHES HAVING 1435 MM LONG X787 WIDEX 584 MM HEIGHT WITHWROUGHT IRON METAL APPROX WT 40 KG,350KG LOAD CARRYING CAPACITY FOR 3 ADULTSFOR INDDOR AND OUTDDOR AS DIRECTED ANDAS PER DESIGH AS DIRECTED--ETC[AS/LOWEST RATE] 1967-CASTING BENCH |
| 47 | SUPPLY OF TRIPLE SLIDE FUN FOR 4-14 YRS ,MFG FROM ANY ISO CERTIIFED COMPANYUSING POWDER COATED GI PIPES AND FRPSHEET AS PER CATLOG PHOTO AS DIRECTED BYENGR IN CHARGE .(SSR No.: AS/QUOTATION |
| 48 | SUPPY AND FIXING 2 SEATER U SWING MFG FROM ANY ISO CERTIFIED COMPANY FOR 4-14YRS , USING POWDER COATED GI PIPES AS PERCATLOG PHOTO AS DIRECTED BY ENGR INCHARGE(SSR No.: AS/QUOTATION) |
| 49 | SUPPLY AND INSTALLATION OF MULTIPLAY SYSTEM FOR 6-12 YEARS CHIDS HAVING AREA44.3X21.3X11.5 FEET ,SAFE AREA 48X25FEET,HUT SHAPED ROOF-2,CURVEDROOF-3,TUNNEL SLIDE-3,SPIRAL SLIDE5FEET,SINGLE N DOUBLE SLIDR,PLASTICSTAIR-1,PERFORATED DESK-4,M.S.BRIDGE-2,BOX LADDER-01, MS NUT CLIMBER ETC.TOTALASSEMBLY MAKE WITH G.I.PIPES OF BCLASS,UV PROTETED POWDER COATED TO GIPIPES 5 TO 6 MM THK FRP SHEETS TO ALLSLIDES AS PER CATLOG PHOTO AS DIRECTED. |
