Tender For Providing Of Single Living Jco Accn At Laipuli Mil Stn Under Ge Dinjan
Tender Value
43 Lakhs
Estimated cost
Bid Submission
28 Jan 2023
0 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dinjan → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Of Single Living Jco Accn At Laipuli Mil Stn Under Ge Dinjan
BOQ
| Sl. No. | Item Description |
| 1 | Total amount of Sch \"A\" Part-IBuilding WorksNote :- This schedule is not pre-priced by MES and the rate indicated as \"Rs. 0.00\" under column 6 signifies this fact only. |
| 2 | Design and Construction of 03 X Single living JCOs Accn in RCC Framed Structure as per Arch Drg No. CWE/DIN/07/22 sht 1/3,2/3 and 3/3 dated 12.12.2022 and specification given in Sch A Notes and Particular Specificationscomplete all as specified. |
| 3 | NOTE: Schedule ‘A’ Part IItoIXare Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-13 only. |
| 4 | Total amount of Sch ‘A’ Part II (Excavation, Earthwork & Site Clearance) |
| 5 | Total amount of Sch ‘A’ Part III (Internal Electrification) |
| 6 | Total amount of Sch ‘A’ Part IV (Internal Water Supply) |
| 7 | Total amount of Sch ‘A’ Part V (External Electrification) |
| 8 | Total amount of Sch ‘A’ Part VI (External Water Supply) |
| 9 | Total amount of Sch ‘A’ Part VII (Road and Path) |
| 10 | Total amount of Sch ‘A’ Part VIII (Sewage Disposal) |
| 11 | Total amount of Sch ‘A’ Part IX (Area Drainage) |
| 12 | SCH \"A PART X(Miscellaneous B/R and E/M works)Note: This schedule is not pre-priced by MES and the rate indicated as \"Rs 0.00\" under Col 6 signifies this fact only |
| 13 | Rough excavation and bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including cost of land, royality if any, transportation, taxes etc for filling including raising earth spreading in layers not exc 30 cm thick in each layer watering,compection with 8 to 12 tone power roller and finished to required size and shape etc any high/depth from existing ground level complete all as specification and as directed.Note :(i). Earth required for the item, shall be supplied by contractor, from out side MOD land at his own arrangment. (ii). All cost of procurment of earth including cost of transportation, royalties, taxes etc. shall be deemed to be included in the unit rate quoted by the contractor.(iii). With referance to clause 3.6 of MES SSR Part-II (2020) on serial page No. 21 it is clarified that measurement of the above item shall be of finished embarkment/treverse of filled earth after consolidation and 10% deduction shall be made from measured and calculated volume to allow for increase in bulk. |
| 14 | Forming embankments including raising or lowering earth spreading in layers not ex 30 cm thick watering rolling and finishing to required size shape etc not ex 1.50m high from base complete all as specified and as directed. |
| 15 | Forming embankments including raising or lowering earth spreading in layers not ex 30 cm thick watering rolling and finishing to required size shape etc ex 1.50m high from base complete all as specified and as directed. |
| 16 | S & F TPN bus bar chamber outdoor type with TPN MCB32 Amps protection complete all as specified and as directed. |
| 17 | Cutting the existing 40/50 mm dia GI pipe and making necessary arrangement for taping of new pipe line of 40/50 mm dia including threading welding etc complete all as specified and as directed. |
| 18 | M & L for construction of new valve pit chamber of size 400 mm X 400 mm X 400 mm with burnt brick (Sub class B) including necessary earth work in any type of soil, PCC foundation (1:4:8) type D-2 20 mm grade stone aggregate as in base concrete, brick work in CM 1:4 with 10 mm thick plaster internally and 15 mm thick externally in CM 1:4, 3 mm thick MS cover with hinges and locking arrangement fixed to angle iron frame made out of 40 mm X 40 mm X 5 mm MS angles complete with 2 coats of synthetic enamel paint over one coat of red oxide prime on all metal works & three coats of white wash on all plastered surfaces of valve chambers complete all as specified & directed by Engineer-in-Charge. |
| 19 | S&F decorative wall mounting brushed nickel finish fixture with opal glass diffuser suitablewith 9 W LED lamp B22 basecomplete all as specified and as directed. |
| 20 | S&F MCB C series SP 240 volts 5 to 32 Amps C series 10KA capacity complete all as specified and as directed. |
| 21 | S&F MCB SPN 240 volts 5 to 32 Amps C series 10KA capacity complete all as specified and as directed. |
| 22 | S&F MCB TPN 240 volts 5 to 32 Amps C series 10KA capacity complete all as specified and as directed. |
| 23 | S&F new 18 W surface and wall mounted LED batten (min 110 lumen per watt) with polycarbonate housing and integrated driver complete all as specified and as directed.(Make : Havells Cat No. LUMILINEBS 18W LED 865 SPCWH or equivalent Make given in Appx B) |
| 24 | S&F 10 W LED energy saving new generation bulk head luminaire (min 110 lumen per watt) with opal diffuser including lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.(Make : Havells Cat No. RUGBYNEONFT 10W LED 860 SSYKTOPCor equivalent Make given in Appx B) |
| 25 | S&F exhaust fan 300mm sweep 900 RMP, 240V with all accessories complete all as specified and as directed. (Make : Crompton model No. Trans Air 12\" reversibleor equivalent Make given in Appx B) |
| 26 | Supply and fixing BLDC base technology ceiling fan 1200 mm, RPM 370, Min Air delivery 210 CMM, 35 Watt,white colour ceiling fan including fixing arrangement of any type. Make : Crompton-ENERGION Active BLDC 5 star or equivalent as given in Appx B and as specified and directed by Engineer-in-charge. |
| 27 | S&F 25 W LED building security new generation energy saving and environmental friendly long life LED street light (min 100 lumen per watt) made up of pressure die cast aluminum housing with high power LED as lighting source and lens imbedded PC cover having TOP Oppening seperate driver compartment with IP 65 protection and inpact resistance of IK07 complete all as specified and as directed (Make : Havells Cat No. ENDURAPEARLSL25WSASYTOPC or equivalent Make given in Appx B) |
| 28 | S&F Basin mixer without pop up complete all as specified and as directed |
| 29 | S&F Wall mixer 2 in 1 complete all as specified and as directed |
| 30 | S&F Health faucet hose and hook complete all as specified and as directed |
AI Tender Summary
Tender Timeline
Dec 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 28, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender